Digitus IPcam Viewer Quick Installation Guide (iOS)

2
Digitus IPcam Viewer Quick Installation Guide (iOS) Digitus IPcam Viewer is the APP for Mobile devices to connect to Digitus IP Cameras (DN-16026 & DN-16035) to have live-view anytime anywhere. This APP is available at APP Store How to Setup: 1. Go to APP store 2. Search for “Digitus IPcam Viewer”, you will find illustration 3. You will find Digitus Camera Viewer with icon 4. Download & Install the APP 5. Execute the APP on your mobile devices 6. If the cameras are in the same LAN of the mobile devices, then press “Add”. The APP will auto-scan and add the cameras.

Transcript of Digitus IPcam Viewer Quick Installation Guide (iOS)

Digitus IPcam Viewer Quick Installation Guide (iOS)

Digitus IPcam Viewer is the APP for Mobile devices to connect to Digitus IP Cameras (DN-16026 &

DN-16035) to have live-view anytime anywhere.

This APP is available at APP Store

How to Setup: 1. Go to APP store

2. Search for “Digitus IPcam Viewer”, you will find illustration

3. You will find Digitus Camera Viewer with icon

4. Download & Install the APP

5. Execute the APP on your mobile devices

6. If the cameras are in the same LAN of the mobile devices, then press “Add”. The APP will

auto-scan and add the cameras.

7. If the cameras are connected to the Internet, then you can manually key in the IP addresses and

port number.

8. For DN-16035 (Pan & Tilt camera), you can control the P & T through smart phone access as

well.

Example: The IP address: 60.250.182.254

Port: 6001

User name: admin

Password: 1234

Press the “Switch” icon to become “Gesture” and you can move the viewing direction by sliding on the screen of the mobile device.