Digital work
33
-
Upload
matthew-noe -
Category
Documents
-
view
215 -
download
2
description
A selection of work by MWTN
Transcript of Digital work
MWTN
No. 01
PORTFOLIO
------------------------------------------------------------------------------------------------------------------------------------------
Wedding Chapel
The Holy Masses Wedding Chapel Challenges a typical problem in architecture, the corner. This project places itself in a changing world where traditional understandings of symbolic spaces have changed. The Wedding Chapel is a growing host that latches onto the surround buildings to become a prominent corner fixture
MATTHEW.NOE
Instructor: Ramon Diaz-Granados
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Layered Façade
Challenges the idea of “thickness” in architecture where skin acts as strictly surface topology. It attempts to create an integrated architecture of highly ornate surface which breaks away from a pattern logic and begins to form both space and structure. The protoarchitectural system is comprised of three layers all based on a triangular volumetric module. Three layers, each at larger scalar units (x,2x,&4x) are superimposed to create a dynamic patterned reading. The first
layer (x) acts as a sunscreen the second (2x) is the system’s enclosure, and the third layer (4x) acts as a structural system. Connection bars vary, allowing the layers to delaminate at various moments to provide for interstitial spaces.
PILSUN.HAM / SEUNG-HYUN.KIM / MATTHEW.NOE Instructor: ELENA MANFERDINI
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Tokoyo Fashion Museum
Tokoyo City, Japan
Omotesando St. Aoyama Neighborhood, Minato-ward
Challenges the idea of “thinness” in architectural surface and skin. The project takes a singular module type which Propagates itself over the entire massing. Much like an article of clothing, the envelope was designed with individual panels which are attached together at the seams. Instead of a shrink-wrapped envelope, the building “tears” apart at the seam conditions to reveal interior programmatic activity, specifically at the runway level. The specific component
deployed was chosen for its sectional qualities - one surface which splays into a second, and could be used for additional structural support or to reach back and attach to interior members. It investigates the notion of introducing variation within this homogenous structure by utilizing three different conditions of treating the spaces between - open structure, glazing, and solid fill. The intensity, and location, of each condition creates a secondary figuration which brings the massing into a cohesive whole.
PILSUN.HAM / SEUNG-HYUN.KIM / MATTHEW.NOE Instructor: ELENA MANFERDINI
------------------------------------------------------------------------------------------------------------------------------------------
Open Space Above the runway
Skybar
Runway
1920’s room
1940’s room
1960’s room
1980’s room
Open Space under Permanent exhibition room
2000 to present
Entrance Hall
Administrative office
Storage room
Loading area
Parking area Souvenir store
------------------------------------------------------------------------------------------------------------------------------------------
POST HOST in city x
Through technology and its advancements we are able to utilize digital fabrication techniques that redefine previous assumptions of material and assembly systems. Pultrusion of a carbon fiber strand system has particular advantages that can be explored through scripting techniques.
The Toronto Dominion Center Towers, designed by Mies Van der Rohe, can be viewed as the most ideal host for developing a templating system. The Toronto Dominion Center towers are our “host”. We will develop an additive system that will begin to embed itself within itself. Through this we will look at the moments that allow connection to be formed between the newly infected towers. The existing steel of the towers would act like a scaffold, to allow for support and material to be transferred, but after the secondary material takes hold and Begins
to gain strength within bundles; the original primary system can begin to recede or shift where it could not before. A new interpretation of floor space, façade design, patterning and transparency are questions on the table. Allowing for the carbon fibers to be a series of nested nests, a new rigidity is possible. Relying on a system of multi-layered pipes some can be seen as purely aesthetic, but no clear differentiation is made between the discrete layered systems.
EMMY.MARUTA / MATTHEW.NOE
Instructor: PETER TESTA
------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------
Archi-Garden
Designing for a problematic wood shop in Taiwan caused for the creation of a transformable space. This new wood shop functions as multiple programs: a meeting space gallery space work space and party space. This project challenges the idea of function through the idea of transformation. The building is made up of corrugated steel and garage doors with a collapsible tensile structure on its side.
MATTHEW.NOE / GRADUATE TEAM
Instructor: Jr Gang Chi
------------------------------------------------------------------------------------------------------------------------------------------
Matthew William Tyler Noe
Matthew William Tyler Noe
Address
Personal
Information
Web
Portfolio
Languages
Degrees
Professional
Highlights
Scholarships
Employment
History
Academic
Employment
310 Jefferson St.
apt 302 Place of Birth: Zanesville, OH Nationality: United State of America Phone: (740)-297-1916
www.mwtnportfolio.tumblr.com
http://issuu.com/zanzabarbarion/docs/mwtn_portfolio
English
Nashville, TN
37208
Masters of Architecture (M.Arch2): Southern California Institute of Architecture, Sci-arc
(Career GPA 3.5, Member of 2010-2011 Testa X-lab, Design is One vol. III Study Abroad and publication) September 11, 2011 Bachelors of Science in Architecture from The Ohio State University, OSU
June 15, 2009
2010-2011 Southern California Institute of Architecture X-lab Studio Program 2010 Southern California Institute of Architecture Design is One Program Study Abroad –Milan, Italy 2005-2009 The Ohio State University Morrill Scholars program 2005 The Ohio State University Freshman Foundation Program
2005-2009 The Ohio State University Morrill Scholars program 2005 The Ohio State University Freshman Foundation Program 2003 Buckeye Boy’s State Young Leaders Program
01-2012- 05-2012 [Sl ap!HQ, Los Angel es, Cal i fornia] Desi gner and Consul tant
A design collective that specializes in media installations and bio-synthetic forms. Duties are; creation of digital design,
design documents and working drawings.
09-2009 - 05-2011 [Plasis Design, Los Angeles, California] Consultant and Fabricator
A live/work environment with a small work shop and CNC router. Worked mostly on product design and small scale
objects. Clients included local designers, Coachella, and the Los Angeles Spanish Museum
09-2009 - 12-2009 [SCI-arc supply store, Los Angeles California] Sales
Material Specialist. Front of house operations, including; one-on-one interaction with clientele, Inventory and material
selection.
05-2009 - 07-2009 [ Ar + Ch , Columbus, Ohio] Designer
Design Intern. Summer 2009. Responsibilities included: Drawings, construction of various models, design development for an ongoing project. 01-2012 - 05-2012 Slap!HQ, Los Angeles, California
09-2009 - 05-2011 Plasis Design, Los Angeles, California
09-2009 - 12-2009 SCI-arc supply store, Los Angeles California
05-2009 - 08-2009 Ar + Ch (Jr Gang Chi Architectural Research Studio), Columbus, Ohio
Page1
Page2
Designer
Sales
Consultant
Fabricator
Software
Programs
Publications
Exhibit and
Installations
Personal
Statement
Mastered skills in Maya and Rhino (proficient in design software including ; AutoCAD, Revit, and Adobe Suites) Educated in all phases of architectural projects including design development, preparation of presentation drawings and specifications, design review, coordination and correlation of construction drawings. Prepared schematics, design development and construction documents. Worked as advisor between clients and upper management. Developed modified and reviewed production drawings and edited project narratives and specifications.
Experienced as a Team Member, Associate Leader, and Stock Crew/Sales Associate/Sales Operations. Attended meetings with board members to discuss services. Attended and took part of design discussions. Mediated discussions about deign issues. Analyzed client problems and developed architectural solutions. Researched materials to determine appropriate selection for project. Planed, coordinated and administered projects from the initial programming stages all the way through to construction administration. Reviewed construction submittals and assisted project manager
in construction administration. Managed, operated and programed, Shop Sabre CNC Router, Epilog/ULS Laser cutting machines, 3-D Printing Sla/Sls/powder
3D Modeling- Autodesk Maya, AutoCAD, Rhino 5.0 Computation- Processing, Arduino Digital/Fabrication-
3-Axis CNC Mill, Surfcam, Rams, Universal and Epilog Laser Cutters, 3D Printing Representation- Mental Ray, Adobe Suites CS5
LIVE WORK | WORK LIVE winner design competitonn, September 2012 Immerse(D) Displayed on www.Archinect.com, April 2012 Design is One vol. III May 2010-July 2010
2011 Gaia Thesis Presentation Sci-arc, Southern California Institution of Architecture 2010 Vapour(ware) Installation Sci-arc, Southern California Institution of Architecture 2009 Rose Window Installation Sci-arc, Southern California Institution of Architecture 2008 Immerse(D) Spring/Summer Display OSU, The Ohio State University Knowlton Hall
Visual story telling remains a fundamental part of articulating ideas in my work. I see design issues as narratives for living
and building that intertwine into a new understanding of what is architecture. My techniques are using 3-D software and simulation tools to generate patterns and objects in ways that mimic a natural order. My interests is a more artistic and animated approach to design resulting in a fascination for animation, simulation and visualization techniques . I am looking for new and interesting opportunities where I can use my skills. It is always my desire to be creative an inspiring while also looking toward the future and thinking with issues of sustainable in mind.
