Digital Power Meter Catalogue(060816)

download Digital Power Meter Catalogue(060816)

of 4

Transcript of Digital Power Meter Catalogue(060816)

  • 7/30/2019 Digital Power Meter Catalogue(060816)

    1/4

    www.pnctech.co.kr

    DIGITALPOWER METERDPM-B100

    DPM-B150

    DIGITALPOWER METER

    P&C Technologies Co., Ltd.

  • 7/30/2019 Digital Power Meter Catalogue(060816)

    2/4

    DPM-B100 / DPM-B150

    Overview

    Front & Rear panel Operator Interface

    DPM-B Series offers high-accuracy power and energy measurements.

    DPM-B Series is going to control and monitor circuit breaker efficiently as well as integrates analog anddigital measurement point in conformity superior circuit drawing, elegant design and high trust.

    The DPM-B Series is simple to use, and offers a big, bright LCD display for superior readability inadverse lighting conditions.

    Complete with RMS of 3-phase voltages and currents, power, energy, power factor, and frequencymeasurements, the DPM-B Series is available in a variety of flexible configurations including IECstandard.

    It offers outstanding quality, versatility, and functionality in a low-cost, ultra-compact meter.

    DPM-B100

    DPM-B150

    Mode:VoltageFrequency

    Load Factor

    Display

    Load FactorDisplay

    Mode & SettingButton

    Active/ReactivePower,

    Energy value

    Active/ReactivePower,

    Energy value

    Voltage value

    Mode Button

    Current value

    Voltage value

    Current value

    CB ControlButton

    Mode:Voltage Frequency

    Mode:Current Frequency

    Mode:Energy

    DI Status LED

    Mode:CurrentPower Factor

    Current InputTerminal

    Digital Input/Output Terminal

    Control Source& GND Terminal

    CommunicationTerminal(RS485)Voltage Input

    Terminal

    Current InputTerminal

    Digital InputTerminal

    Control Source& GND Terminal

    Communication

    Terminal(RS485)

    Voltage InputTerminal

    Digital OutputTerminal

    Set Button

    Mode:Energy

  • 7/30/2019 Digital Power Meter Catalogue(060816)

    3/4

    Features Summary

    Ease of Use

    - Fast setup via display

    - Bright, easy to read LCD display

    Measurements

    - 3-phase voltages/currents RMS,

    Active/Reactive power, Active/Reactive Energy

    - Frequency, power factor

    Communication

    - RS-485 port

    - Modbus RTU for integration

    Standards

    - High accuracy, supports IEC 60687, IEC61036,

    IEC61268, IEC62053-21, IEC62053-22 and

    IEC62053-2

    Pulse Outputs

    kWh, kVARh

    Communications

    - RS-485 port with standard Modbus RTU

    - Baud rated to 19,200bps

    Standards- High accuracy, supports IEC 60687, IEC61036,

    IEC61268, IEC62053-21, IEC62053-22 and

    IEC62053-2

    Basic functions

    Front Panel Display

    Large, bright LCD display

    - Displays all basic power parameters- Display load Factor

    - The front-face display panel of DPM-B150

    is composed of a LCD, 8 LEDs, 8 keypads buttons

    to display various digital input/output.

    Pulse outputs

    - 2 outputs for kWh, kVARh

    Voltage L-N Per phase

    Voltage L-L Per phase

    Frequency

    Current Per phase

    Active Power 3-phase total

    Reactive Power 3-phase total

    Active Energy 3-phase total

    Reactive Energy 3-phase total

    Power Factor 3-phase total

    Digital InputGeneral Purpose

    14

    CB Status 2

    Digital OutputPulse

    12

    Control 2

    Power Supplies

    - 85 to 264VAC/VDC

    - 45 to 65Hz

    Specifications

    Accuracy- Voltage: L-N 0.2%, L-L 0.2%

    - Frequency: 0.1Hz

    - Current: 0.2%

    - Power Factor: 0.5%

    - Power and energy measurements:

    (kW, kVAR, kWh, kVARh) 0.5%

    Environmental Conditions

    - Operating temp: -20 to 70

    - Storage: -38 to 80

    - Humidity: 5% to 95%Input characteristics and connection

    - Measurement Bandwidth:

    Voltage: 260Hz, Current : 14kHz

    - Support Direct 4-wire, 4-wire (3PT, 3CT), 4-wire

    (2PT, 3CT), Direct 3-wire, 3-wire (2PT, 2CT), Direct 3-

    wire single phase, Direct 2-wire single phase

    - Impedance: 10M Ohm/phase

    - Burden: PT < 0.5VA, CT < 0.1VA

    (Voltage : < 460V, Current : < 10A)

    Dimensions and Shipping- Basic unit installed depth:

    B100: 110x106x110(mm) B150: 110x104x160(mm)

    - Shipping weight:

    B100: 0.54kg B150: 0.73kg

    B100 B150

    P&C Technologies Co., Ltd.

  • 7/30/2019 Digital Power Meter Catalogue(060816)

    4/4

    Head office:

    #304, AnyangMegavalley, 799, Kwanyang-dong,

    Dongahn-gu, Anyang, Kyonggi-do, 431-767 Korea

    Tel : 82-31-420-5791 Fax : 82-31-420-5793

    Seoul office:

    6F, Kwangmyung B/D, Bangi-dong, Songpa-gu, Seoul,138-050, Korea

    Tel : 82-2-2240-8106 Fax : 82-2-2240-8195

    Contact Person: Deuy Park [email protected]

    URL: http://www.pnctech.co.kr

    Connection Diagram (Voltage & Current)

    3-phase, 4-wire (3PT, 3CT) 3-phase, 4-wire (Direct)

    3-phase, 3-wire (Direct) 3-phase, 4-wire (2PT, 3CT)

    3-phase, 3-wire (2PT, 2CT) 1-phase, 3-wire (Direct)

    1-phase, 2-wire (Direct)