Difference between Manufactured Stone and

concrete Paving

Introduction:

Basically there are two type of paving natural stones or manufactured and concrete. In the meanwhile comparing natural stone paving with the concrete is quite affordable and gives you the aesthetic look to the property and these benefits make them among the best decorating the home garden, living area, parking , swimming pool, outdoor fireplace and anywhere in the outdoor space .

Difference between Manufactured stone and concrete Paving

The most commonly using the paving or natural stones other than the concrete, each choice can provide different advantages depending on the requirements.

Natural:

Natural stones pavers are cut from the natural rocks, all most we are sure of maintaining the same naturally of the stones to the stone paver’s slabs but in the concrete pavers are manmade materials, so it can to done with many colors and textures as we desired.

Installation:

It is easy in the concrete comparing the stones, takes les time to dry and cure. Majorly we found the crack when the ground below it flexes.

Whereas the stone takes more time and more labor preparation before installation like digging, base preparations, lay the pavers, cutting the boarders and many more finally with the sealing the paver upon completions.

Usability:

Pavers are manufactured to be equally so that it will be every easy to replace with the same quality of aesthetic stones where as with the concrete not possible to replace as not damaging the originality.

Cost is Key:

Long term durability according to the temperature and weather conditions of the two, natural stones pavers can sustain and cost effective with the easy maintenance on the regular basis.

Address

StoneTop Inc.155 Celtic Boulevard

Tyrone, GA 30290

Ph: 770-487-0888

Fax: 770-487-0647

Website: http://stonetopgranite.com/

E-Mail: info@stonetopgranite.com

Thank You