7/25/2019 Dic Sem 3 Sis q Bank 2015

1/3

D I C : SEM-3 : SIS & SIL : QUESTION BANK : GOVT. POLYTECHNIC PALANPUR: 2 0 1 5 | 1

PREPARED BY Lect. N P VASAVA

2- MARKS QUESTIONSl. No. QUESTION

01 List out various Equipment protection levels.

02 Classify various types of zones with respect to hazards & safety of process.

03 List various types of ANSI/NFPA areas.

04 Give comparison of SIF & SIS.

05 List various types of maintenance records/reports.

06 Explain in brief Interlocks for plant safety.07 Explain in brief Safety Instrument Maintenance indent book.

08 List out various safety integrated levels.

09 Explain in brief Safety Instrument log book.

10 Give list of maintenance activities.

11 What is safety Instrumented system?

12 What is High Integrity Process Pressure System?

13 Explain safety instrument log book in brief.

14 List safety instrumented levels.

15 Explain Safety critical system.

16 What is Safety Requirement Specification (SRS)?17 Define Safety Life Cycle.

18 Explain Safety Instrument bin card.

19 Define the term Protection System Maintenance Program (PSMP).

20 What is maintenance? List type of it.

21 what is a non hazardous area ?

22 define zones 20

23 define zones 21

24 define zones 22

25 what is zone 1 area?

26 Define hazard.

27 Define Operability.

28 What is HIPPS ?

29 What is SIL ?

29 Write Type of FMECA

30 What is SRS ?

31 Define RISK .

32

33 What is SIF?

34 Give the definition of HAZARD.

34What is Interlock?

Note :

====================================

7/25/2019 Dic Sem 3 Sis q Bank 2015

2/3

D I C : SEM-3 : SIS & SIL : QUESTION BANK : GOVT. POLYTECHNIC PALANPUR: 2 0 1 5 | 2

PREPARED BY Lect. N P VASAVA

3- MARKS QUESTIONSSl. No. QUESTIONS

01 Explain in brief Hazard and operability studies (HAZOP)

02 Describe reliability regimes for life critical systems.

03 Give comparison between SIF & SIL.

04 Explain with figure Safety instrumented system (SIS).

05 Classify various type of Temperature

06 Define the terms of SIF -Mode of operation, Detection, Decision, Action.07 Describe failure modes, effects, and criticality analysis [FMECA]

08 Describe self-monitoring capabilities of system components

09 Explain failure mode and effects analysis (FMEA).

10 Explain Safety Instrument complaint book with example.

11 Explain in brief Safety Instrument bin card.

12 Describe Time Based Maintenance (TBM) Programs.

13 Describe Safety instrumented function.

14 Compare SIF and SIS.

15 Explain safety life cycle with diagram.

16 Give classification of various type of Equipment Protection Level.17 Discuss the role of Software engineering for life-critical systems.

18 Describe reliability regimes.

19 Explain Safety Instrument Maintenance indent book.

20 Give Comparison of SIF and SIL.

21 Explain Performance-Based maintenance process.

22 Discuss the Emergency shutdown system.

23 Write short note on HIPPS (High Integrity Process Pressure System).

24 write in brief about equipment category 2.

25 write in brief about equipment category 3.

26 Give advantage of SIL standardization.

27 Explain PHA.

28 Write down the comparison of SIF and SIS.

====================================

4- MARKS QUESTIONSSl. No. QUESTIONS

01 Describe Safety instrumented function.

02 Describe with diagram safety life cycle.

03 Explain safety requirement specification in detail.

04 What is maintenance? Explain Condition Based Maintenance (CBM) Programs.

05 Define the terms 1.Fail-safe systems 2.Fail-secure systems.

06 Explain Safe Failure Fraction in detail.07 Write short note on Role of software engineering for life-critical systems.

08 Explain Process Hazards Analysis (PHA).

09 Describe the various terms of SIF (Safety Instrumented Function).

10 Explain risk with reference to safety integrated level.

11 Write short note on Emergency shut down system.

12 Discuss the termPerformance based maintenance process.

13 Describe various types of ANSI/NFPA areas.

14 Explain failure mode and effects analysis (FMEA).

15 Discuss the term HAZOP.

16 Explain Process Hazards Analysis in terms of safety instrumentation system.

17 Define the various terms context to Protection System Maintenance Program.

18 Explain FMECA in detail.

19 Explain Interlock for plant safety.

7/25/2019 Dic Sem 3 Sis q Bank 2015

3/3

D I C : SEM-3 : SIS & SIL : QUESTION BANK : GOVT. POLYTECHNIC PALANPUR: 2 0 1 5 | 3

PREPARED BY Lect. N P VASAVA

4- MARKS QUESTIONSSl. No. QUESTIONS

20 Describe probability of failure on demand (PFD).

21 Describe the various types of Reports / Records for Maintenance.

22 Explain Time Based Maintenance Program.

23 Categories equipment SIS

24 Write short note on EPL.

25 Give description of ANSI/NEPA AREA.26 EXPLAIN gas/vapor GROUP

27 Explain SFF.

28 Explain FIT (FAILURES IN TIME).

29 Explain SIF(SAFETY INSTUMENTED FUNCTION).

30 Explain HIPPS.

31 Explain SIL.

32 Explain SRS (SAFETY REQIREMENT SPECIFICATION )

33 Explain Non Hazardous Area.

34 Explain Zone 20 & Zone 21.

35 Explain Fail Secure System.36 Explain Operability.

37 Explain FMECA.

38 Explain PHA.

Note :

====================================

7- MARKS QUESTIONSSl. No. QUESTIONS

01 Explain safety life cycle with diagram.

02 Describe various types of ANSI/NFPA areas.

03 Classify various types of dust zones and gas/ vapor groups.04 Give classification of various type of Equipment Protection Level.

05 Describe the role of Software engineering for life-critical systems.

06 Compare SIF and SIS.

07 Describe safety integrated level SIL-0 to SIL-4.

08 Explain in brief (a) HAZOP (b) FMECA.

09 Define the various terms context to Protection System Maintenance Program.

10 Explain Process Hazards Analysis in terms of safety instrumentation system.

11 Explain in brief 1. Safety Instrument bin card 2.Safety Instrument complaint book.

12 Describe Safety instrumented function.

13 Explain self-monitoring capabilities and Limitations of system components.

14 Explain in brief (a) Interlocks for plant safety (b) Safety Instrument log book.15 What is maintenance? Explain Condition Based Maintenance Programs.

16 Explain safety requirement specification in detail.

17 Discuss the term Emergency shutdown system.

18What is equipment protection? explain various terms with reference to protection

system maintenance program.

19 Describe Self-Monitoring Capabilities and Limitations of the system components.

20 Explain Condition Based Maintenance (CBM) Programs.

21 Explain Safe Failure Fraction (SFF).

22 Explain the safety life cycle with a suitable diagram.

23 Explain safety instrumented system with some example.24 Explain HAZOP in detail.

25 8. Explain Emergency Shutdown System.