DURAGARD ® IS A REGISTERED TM OF ADVANTAGE DIST. LLC, ROCH., MN 55904 Product Code: DUR75/140

DIAMOND PLATE® 75W-140 100% SYNTHETIC GEAR LUBE ADVANCED TECHNOLOGY, PREMIUM 100% SYNTHETIC LUBRICANTS

75W-140 100% Synthetic Gear Lube is specially formulated with

only the finest quality paraffinic base oils, including a premium advanced additive system which includes an extreme pressure, anti-wear and anti-friction additives, oxidation and corrosion preventatives, and anti-foam agents to deliver unsurpassed protection and performance.

75W-140 100% Synthetic Gear Lube is specially formulated for multipurpose, extreme pressure applications including conventional differentials, gear boxes, limited slip rear axles, manual transmissions, hypoid, spiral bevel, and worm gear axles. It is recommended for passenger car, bus, farm equipment, off-road construction equipment, highway truck but can also be used in manual trans-missions or the differential (hypoid) gear oil specifications from all domestic and foreign manufacturers, and in axles where an API GL-5 or GL-4 lubricant is recommended.

Customer Benefits with DIAMOND PLATE PROTECTION ®

* Potential energy savings: The low friction properties of Synthetic Gear Lube SAE 75W-140 make significant fuel and energy conservation.

* Low temperature protection: Provides instant lubrication to components during start- up in thermally stressed arctic type conditions, preventing the scoring caused by lack of initial lubrication. In addition, the superior lubricity of this gear lubricant improves component life and reduces repairs.

* High temperature protection: Provides superior film strength and protection in thermally stressed, high heat conditions, compared to conventional gear oils, preventing the ridging, rippling and spalling caused by surface distress in heavily loaded gear sets.

* Multi-purpose: to satisfy the lubricant requirements of a wide variety of gears.

* High capacity: Extreme pressure lubricant additives for hypoid and heavily loaded gears.

* Reduced operating temperatures: Lower frictional losses and lower hydrodynamic drag result in reduced operating temperatures compared to conventional gear oils.

* Excellent oxidation stability: The 100% synthetic base oil used in the manufacture of this product assures outstanding stability and service life.

* Provides excellent moisture and corrosion protection.

2018 © Copyright ADVANTAGE DIST., LLC All Rights Reserved Rev 01/2018 PG-1

SAE

SAE

SAE

Customer Benefits (Cont.)

* Minimize lubricant inventory: Compatible with other mineral and synthetic gear oils and can be used in axles and certain transmissions minimizing the number of products required in inventory.

* Extended drain capability: Meets the requirements typical of axle manufacturers for extended service oil drain intervals.

Application Specifications:

75W-140 100% Synthetic Gear Lube meets or exceeds the requirements of API service MT-1/GL-5 EP gear oil service classification and for use in applications requiring the MIL-2105E/F specification. This product meets or exceeds the requirements similar to the following manufacturers and global specifications:

API GL-5, GL-4 AGMA 9005-E02, 250.03, 250.04, 251.02, No. 4 AIST/US Steel 224 ArvinMeritor (Rockwell International) 076-E CEC L-45-A-99 MACK GO-J, GO-H, GO-G MT-1 SAE J2360 MIL-2105E/F Limited Slip

Product Containers Available: Bulk * 55 gal. drums * 16 gal. kegs * 5 gal. pails * 2.5 gal/2pk 2018 © Copyright ADVANTAGE DIST., LLC All Rights Reserved Rev 01/2018 PG-2

SAE

Typical Physical Specifications: SAE Grade 75W-140 Product Code: DUR75/140 INSPECTION INFORMATION TEST METHOD TYPICAL VALUE Gravity API ASTM D287 34.31 Specific Gravity @60°F (15.6°C) ASTM D4052 0.8534 Viscosity @ 40°C cSt ASTM D445 171.8 Viscosity @ 100°C cSt ASTM D445 27.64 Viscosity Index ASTM D2270 200 Pour Point °C (°F) ASTM D5950 -51 °C (-60 °F) Flash Point °C ASTM D92 232 Flash Point °F ASTM D92 450 Color ASTM D1500 1 Brookfield Viscosity at -40°C, cP ASTM D2983 127,000 Typical test data average values only, minor variations which do not affect product performance are to be expected during normal manufacturing.

READ ENTIRE SDS BULLETIN FOR HANDLING AND SAFETY INFORMATION

Advantage Distributing and Lubricants, LLC 3434 Marion Rd SE Rochester, MN 55904 507-289-5555 http://duragardoil.com/duragard_gear_lube_100_syn_75w140_1490_ghs.php 2018 © Copyright ADVANTAGE DIST., LLC All Rights Reserved Rev 01/2018 PG-3 The data above includes registered trademarks of the respective manufacturers.