CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email info@csunitec.com • www.csunitec.com

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2012, CS Unitec, Inc., 04-12-10M

AbrasivesAnnular CuttersAxial Fans & VentilatorsBand SawsBeveling &Deburring MachinesChain SawsConcrete SawsCorner DrillsDiamond CoreDrilling MachinesDrills & Drive UnitsDust Extraction ToolsFlap Discs

Grinders & PolishersHammer DrillsImpact WrenchesMagnetic DrillsMixersNibblersNon-sparking ToolsNut RunnersPipe SandersPower HacksawsReciprocating SawsSafety ToolsSurface FinishersVacuums

Visit our Web site for videos and more product information. Call for a complete catalog.

1-800-700-5919 • 203-853-9522 • www.csunitec.com

Concrete Saws Cut concrete, reinforced concrete, ductile iron, asphalt and moreDiamond Core Drills Wet and Dry • Electric, Hydraulic and Pneumatic

Request our catalog:

• Portable Saws

Request our catalogs:

• Portable Mixers

• Concrete Grindingand Dust Extractionliterature

• Hand-held and walk-behind air concrete saws

• Cut concrete, wet or dry

• Ideal for joint and floor sawing, trenching, roadrepair and more

• 14” to 20” blade capacity• Hand-held andrig-mountedmodels

• Heavy-duty 3-speed machines

• Drill holes up to 16” dia. inconcrete, reinforced concrete,brick, block and stone

• Wet and dry models available

• Water recycling and slurrycontainment vacuum

• Ideal for wet working tools

• Slurry and debris arecontained in filter bag

• Hydraulic and air core drills

• Hand-held and rig-mounted

• High-torque, 3-speed systems

• Holes up to 12”

• Mini wet diamond drillfor precise dowel,anchor and thru holes

• 5/32” to 3/4” dia. holesin tile, natural stoneand concrete

• Fast and clean

• High-speed diamond core drill for holes 3/8” to 1”

• Ideal for drilling holes for anchors, rebar, etc.

• Quick-change diamond bits for reinforced concreteand stone

• Powerful vacuums for concrete dust

• Self-cleaning filter system

• With or without HEPA filtration

• Wet or Dry

• Heavy-duty mixingmachines

• Mix heavy materialssuch as epoxy, mortarsand cement, as well aspaint and more

• Portable mixer stands

• Variety of paddlesavailable

• Heavy-duty hand-held and walk-behindconcrete grinders

• 5” and 7” models

• Remove paint, epoxy,glue and other hardcoatings

• Air and hydraulic concrete chain saws forreinforced concrete, brick, block,concrete pipe and natural stone

• Air chain saw for ductile iron

• Straight cuts throughconcrete up to 15” deep

• Dependable, powerful6.5 HP air motor

• AIRForce F4™Diamond Chains

Request our literaturepacket:

• Diamond Core Drills

Drill dowel, anchor andthru holes in tile, naturalstone and concrete –quickly and cleanly

AIRPower

F4 Diamond Chains

AIR Power

Portable water system

2-speed wet/dry

diamond core drill

Air

Hydraulic

Electric, hydraulic andpneumatic hand-held

and rig-mounted modelsand diamond core bits

Concrete Grinders, Vacuums & Mixers

1-800-700-5919 • 203-853-9522 • www.csunitec.com 1-800-700-5919 • 203-853-9522 • www.csunitec.com

Grind in Corners!Grind in Corners!

Dry Polishin Corners!Dry Polishin Corners!

Magnetic Drills & Cutters Surface Finishing ToolsElectric • Pneumatic • Hydraulic

Grinding can be greener than you thought.

Steel • Stainless Steel • Aluminum • More Air and Hydraulic Tools for Oil, Gas and Energy Industries

• Manual or automatic feed

• Lightweight – from 24 lbs.

• Drill holes up to 51/8” dia.

• Electric, pneumatic and hydraulic

• Variety of annular cutters andaccessories

• High-torque

• Electric,pneumaticand hydraulic

• Reversible andvariable-speed

• Driving applicationsinclude mills,spindles, bar boring,tube rolling and valve turning

• Shadow-free, uniform finishes

• Ideal for finishing stainless steel,steel, nonferrous metals and plastics

• Hollow-core abrasives save time and money

• Electric or air

• Multifunctional grindingand polishing abrasivesfor flat surfaces, insidecorners and on pipe

• Faster, longer life andgreener – better for theenvironment

• Up to 11,000 RPM

• Multipurposebeveling anddeburring machines

• Ideal for deburring,chamfering andstraightening edgeson plates and pipe

Request our catalog:

• Magnetic Drills, Hand-held Drills, Drive Units,Nut Runners, HammerDrills and More

• Cut up to 5-1/8”• Twist Drillup to 1-1/4”

• Tap up to 1-1/8”

Shadow-free, uniformbrush, matte andmirror finishes

Kits and a wide range ofabrasives are available

Request our catalog:

• Surface Finishing Tools & Accessories

Request our catalog:

• Non-sparking Hand Tools

Male Sq.Drive orMT

Spindle

Electric,Air &

HydraulicModels

Drill holes upto 5-1/8” dia.

Highest Power-to-Weight Ratios • Superior Magnetic Strength

Safety Tools For use inATEX andEX Zones

For use inATEX andEX Zones

• High-quality non-sparking and non-magnetic safety tools

• Aluminum Bronze (AlBr)or Copper Beryllium (CuBe) alloy

• Hammers, wrenches, sockets, wedges, chisels and more

• For ATEX and Ex zones wherehazardous, flammable or combustiblematerials are present

ATEX CertifiedAir and Hydraulic Tools

ATEX CertifiedAir and Hydraulic Tools

• Portablepneumatichacksaws foron-site cuttingof pipe up to24” OD andstructural steel

• Electric andhydraulicmodels alsoavailable

• Pneumatic reciprocating saws forcutting steel and pipe up to 6” dia.

• Electric and hydraulic models alsoavailable

• Portable air band saws cut up to 7”OD, 9” depth

• Electric andhydraulic modelsalso available

• Pneumaticdrill and airoperatedmagnet

• Up to 2-1/16”dia. holes

• Electric andhydraulicmodels alsoavailable

Request our catalogs:

• Magnetic Drills, Hand-held Drills, Drive Units,Nut Runners, HammerDrills and More

• Portable Saws

AirOperated

Non-sparkingNon-magnetic

Electric, Air& HydraulicModels

1-800-700-5919 • 203-853-9522 • www.csunitec.com

7"Cutting Capacity

4-3/4"Cutting

Capacity

Drills, Drive Units& Special Motors

Call for ATEX details

• Pneumatic SDS Plus andSDS Max rotary hammer drills

• Hydraulic models also available

1-800-700-5919 • 203-853-9522 • www.csunitec.com 1-800-700-5919 • 203-853-9522 • www.csunitec.com

Grind in Corners!Grind in Corners!

Dry Polishin Corners!Dry Polishin Corners!

Magnetic Drills & Cutters Surface Finishing ToolsElectric • Pneumatic • Hydraulic

Grinding can be greener than you thought.

Steel • Stainless Steel • Aluminum • More Air and Hydraulic Tools for Oil, Gas and Energy Industries

• Manual or automatic feed

• Lightweight – from 24 lbs.

• Drill holes up to 51/8” dia.

• Electric, pneumatic and hydraulic

• Variety of annular cutters andaccessories

• High-torque

• Electric,pneumaticand hydraulic

• Reversible andvariable-speed

• Driving applicationsinclude mills,spindles, bar boring,tube rolling and valve turning

• Shadow-free, uniform finishes

• Ideal for finishing stainless steel,steel, nonferrous metals and plastics

• Hollow-core abrasives save time and money

• Electric or air

• Multifunctional grindingand polishing abrasivesfor flat surfaces, insidecorners and on pipe

• Faster, longer life andgreener – better for theenvironment

• Up to 11,000 RPM

• Multipurposebeveling anddeburring machines

• Ideal for deburring,chamfering andstraightening edgeson plates and pipe

Request our catalog:

• Magnetic Drills, Hand-held Drills, Drive Units,Nut Runners, HammerDrills and More

• Cut up to 5-1/8”• Twist Drillup to 1-1/4”

• Tap up to 1-1/8”

Shadow-free, uniformbrush, matte andmirror finishes

Kits and a wide range ofabrasives are available

Request our catalog:

• Surface Finishing Tools & Accessories

Request our catalog:

• Non-sparking Hand Tools

Male Sq.Drive orMT

Spindle

Electric,Air &

HydraulicModels

Drill holes upto 5-1/8” dia.

Highest Power-to-Weight Ratios • Superior Magnetic Strength

Safety Tools For use inATEX andEX Zones

For use inATEX andEX Zones

• High-quality non-sparking and non-magnetic safety tools

• Aluminum Bronze (AlBr)or Copper Beryllium (CuBe) alloy

• Hammers, wrenches, sockets, wedges, chisels and more

• For ATEX and Ex zones wherehazardous, flammable or combustiblematerials are present

ATEX CertifiedAir and Hydraulic Tools

ATEX CertifiedAir and Hydraulic Tools

• Portablepneumatichacksaws foron-site cuttingof pipe up to24” OD andstructural steel

• Electric andhydraulicmodels alsoavailable

• Pneumatic reciprocating saws forcutting steel and pipe up to 6” dia.

• Electric and hydraulic models alsoavailable

• Portable air band saws cut up to 7”OD, 9” depth

• Electric andhydraulic modelsalso available

• Pneumaticdrill and airoperatedmagnet

• Up to 2-1/16”dia. holes

• Electric andhydraulicmodels alsoavailable

Request our catalogs:

• Magnetic Drills, Hand-held Drills, Drive Units,Nut Runners, HammerDrills and More

• Portable Saws

AirOperated

Non-sparkingNon-magnetic

Electric, Air& HydraulicModels

1-800-700-5919 • 203-853-9522 • www.csunitec.com

7"Cutting Capacity

4-3/4"Cutting

Capacity

Drills, Drive Units& Special Motors

Call for ATEX details

• Pneumatic SDS Plus andSDS Max rotary hammer drills

• Hydraulic models also available

1-800-700-5919 • 203-853-9522 • www.csunitec.com 1-800-700-5919 • 203-853-9522 • www.csunitec.com

Grind in Corners!Grind in Corners!

Dry Polishin Corners!Dry Polishin Corners!

Magnetic Drills & Cutters Surface Finishing ToolsElectric • Pneumatic • Hydraulic

Grinding can be greener than you thought.

Steel • Stainless Steel • Aluminum • More Air and Hydraulic Tools for Oil, Gas and Energy Industries

• Manual or automatic feed

• Lightweight – from 24 lbs.

• Drill holes up to 51/8” dia.

• Electric, pneumatic and hydraulic

• Variety of annular cutters andaccessories

• High-torque

• Electric,pneumaticand hydraulic

• Reversible andvariable-speed

• Driving applicationsinclude mills,spindles, bar boring,tube rolling and valve turning

• Shadow-free, uniform finishes

• Ideal for finishing stainless steel,steel, nonferrous metals and plastics

• Hollow-core abrasives save time and money

• Electric or air

• Multifunctional grindingand polishing abrasivesfor flat surfaces, insidecorners and on pipe

• Faster, longer life andgreener – better for theenvironment

• Up to 11,000 RPM

• Multipurposebeveling anddeburring machines

• Ideal for deburring,chamfering andstraightening edgeson plates and pipe

Request our catalog:

• Magnetic Drills, Hand-held Drills, Drive Units,Nut Runners, HammerDrills and More

• Cut up to 5-1/8”• Twist Drillup to 1-1/4”

• Tap up to 1-1/8”

Shadow-free, uniformbrush, matte andmirror finishes

Kits and a wide range ofabrasives are available

Request our catalog:

• Surface Finishing Tools & Accessories

Request our catalog:

• Non-sparking Hand Tools

Male Sq.Drive orMT

Spindle

Electric,Air &

HydraulicModels

Drill holes upto 5-1/8” dia.

Highest Power-to-Weight Ratios • Superior Magnetic Strength

Safety Tools For use inATEX andEX Zones

For use inATEX andEX Zones

• High-quality non-sparking and non-magnetic safety tools

• Aluminum Bronze (AlBr)or Copper Beryllium (CuBe) alloy

• Hammers, wrenches, sockets, wedges, chisels and more

• For ATEX and Ex zones wherehazardous, flammable or combustiblematerials are present

ATEX CertifiedAir and Hydraulic Tools

ATEX CertifiedAir and Hydraulic Tools

• Portablepneumatichacksaws foron-site cuttingof pipe up to24” OD andstructural steel

• Electric andhydraulicmodels alsoavailable

• Pneumatic reciprocating saws forcutting steel and pipe up to 6” dia.

• Electric and hydraulic models alsoavailable

• Portable air band saws cut up to 7”OD, 9” depth

• Electric andhydraulic modelsalso available

• Pneumaticdrill and airoperatedmagnet

• Up to 2-1/16”dia. holes

• Electric andhydraulicmodels alsoavailable

Request our catalogs:

• Magnetic Drills, Hand-held Drills, Drive Units,Nut Runners, HammerDrills and More

• Portable Saws

AirOperated

Non-sparkingNon-magnetic

Electric, Air& HydraulicModels

1-800-700-5919 • 203-853-9522 • www.csunitec.com

7"Cutting Capacity

4-3/4"Cutting

Capacity

Drills, Drive Units& Special Motors

Call for ATEX details

• Pneumatic SDS Plus andSDS Max rotary hammer drills

• Hydraulic models also available

CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email info@csunitec.com • www.csunitec.com

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2011, CS Unitec, Inc., 03-11-10M

AbrasivesAnnular CuttersAxial Fans & VentilatorsBand SawsBeveling &Deburring MachinesChain SawsConcrete SawsCorner DrillsDiamond CoreDrilling MachinesDrills & Drive UnitsDust Extraction ToolsFlap Discs

Grinders & PolishersHammer DrillsImpact WrenchesMagnetic DrillsMixersNibblersNon-sparking ToolsNut RunnersPipe SandersPower HacksawsReciprocating SawsSafety ToolsSurface FinishersVacuums

Visit our Web site for videos and more product information. Call for a complete catalog.

1-800-700-5919 • 203-853-9522 • www.csunitec.com

Concrete Saws Cut concrete, reinforced concrete, ductile iron, asphalt and moreDiamond Core Drills Wet and Dry • Electric, Hydraulic and Pneumatic

Request our catalog:

• Portable Saws

Request our catalogs:

• Portable Mixers

• Concrete Grindingand Dust Extractionliterature

• Hand-held and walk-behind air concrete saws

• Cut concrete, wet or dry

• Ideal for joint and floor sawing, trenching, roadrepair and more

• 14” to 20” blade capacity• Hand-held andrig-mountedmodels

• Heavy-duty 3-speed machines

• Drill holes up to 16” dia. inconcrete, reinforced concrete,brick, block and stone

• Wet and dry models available

• Water recycling and slurrycontainment vacuum

• Ideal for wet working tools

• Slurry and debris arecontained in filter bag

• Hydraulic and air core drills

• Hand-held and rig-mounted

• High-torque, 3-speed systems

• Holes up to 12”

• Mini wet diamond drillfor precise dowel,anchor and thru holes

• 5/32” to 3/4” dia. holesin tile, natural stoneand concrete

• Fast and clean

• High-speed diamond core drill for holes 3/8” to 1”

• Ideal for drilling holes for anchors, rebar, etc.

• Quick-change diamond bits for reinforced concreteand stone

• Powerful vacuums for concrete dust

• Self-cleaning filter system

• With or without HEPA filtration

• Wet or Dry

• Heavy-duty mixingmachines

• Mix heavy materialssuch as epoxy, mortarsand cement, as well aspaint and more

• Portable mixer stands

• Variety of paddlesavailable

• Heavy-duty hand-held and walk-behindconcrete grinders

• 5” and 7” models

• Remove paint, epoxy,glue and other hardcoatings

• Air and hydraulic concrete chain saws forreinforced concrete, brick, block,concrete pipe and natural stone

• Air chain saw for ductile iron

• Straight cuts throughconcrete up to 15” deep

• Dependable, powerful6.5 HP air motor

• AIRForce F4™Diamond Chains

Request our literaturepacket:

• Diamond Core Drills

Drill dowel, anchor andthru holes in tile, naturalstone and concrete –quickly and cleanly

AIRPower

F4 Diamond Chains

AIR Power

Portable water system

2-speed wet/dry

diamond core drill

Air

Hydraulic

Electric, hydraulic andpneumatic hand-held

and rig-mounted modelsand diamond core bits

Concrete Grinders, Vacuums & Mixers

CS UNITEC, Inc.22 Harbor Avenue, Norwalk, CT 06850Phone 800-700-5919 • 203-853-9522 • Fax 203-853-9921Email info@csunitec.com • www.csunitec.com

ALL SPECIFICATIONS ARE SUBJECT TO CHANGE © Copyright 2012, CS Unitec, Inc., 04-12-10M

AbrasivesAnnular CuttersAxial Fans & VentilatorsBand SawsBeveling &Deburring MachinesChain SawsConcrete SawsCorner DrillsDiamond CoreDrilling MachinesDrills & Drive UnitsDust Extraction ToolsFlap Discs

Grinders & PolishersHammer DrillsImpact WrenchesMagnetic DrillsMixersNibblersNon-sparking ToolsNut RunnersPipe SandersPower HacksawsReciprocating SawsSafety ToolsSurface FinishersVacuums

Visit our Web site for videos and more product information. Call for a complete catalog.

1-800-700-5919 • 203-853-9522 • www.csunitec.com

Concrete Saws Cut concrete, reinforced concrete, ductile iron, asphalt and moreDiamond Core Drills Wet and Dry • Electric, Hydraulic and Pneumatic

Request our catalog:

• Portable Saws

Request our catalogs:

• Portable Mixers

• Concrete Grindingand Dust Extractionliterature

• Hand-held and walk-behind air concrete saws

• Cut concrete, wet or dry

• Ideal for joint and floor sawing, trenching, roadrepair and more

• 14” to 20” blade capacity• Hand-held andrig-mountedmodels

• Heavy-duty 3-speed machines

• Drill holes up to 16” dia. inconcrete, reinforced concrete,brick, block and stone

• Wet and dry models available

• Water recycling and slurrycontainment vacuum

• Ideal for wet working tools

• Slurry and debris arecontained in filter bag

• Hydraulic and air core drills

• Hand-held and rig-mounted

• High-torque, 3-speed systems

• Holes up to 12”

• Mini wet diamond drillfor precise dowel,anchor and thru holes

• 5/32” to 3/4” dia. holesin tile, natural stoneand concrete

• Fast and clean

• High-speed diamond core drill for holes 3/8” to 1”

• Ideal for drilling holes for anchors, rebar, etc.

• Quick-change diamond bits for reinforced concreteand stone

• Powerful vacuums for concrete dust

• Self-cleaning filter system

• With or without HEPA filtration

• Wet or Dry

• Heavy-duty mixingmachines

• Mix heavy materialssuch as epoxy, mortarsand cement, as well aspaint and more

• Portable mixer stands

• Variety of paddlesavailable

• Heavy-duty hand-held and walk-behindconcrete grinders

• 5” and 7” models

• Remove paint, epoxy,glue and other hardcoatings

• Air and hydraulic concrete chain saws forreinforced concrete, brick, block,concrete pipe and natural stone

• Air chain saw for ductile iron

• Straight cuts throughconcrete up to 15” deep

• Dependable, powerful6.5 HP air motor

• AIRForce F4™Diamond Chains

Request our literaturepacket:

• Diamond Core Drills

Drill dowel, anchor andthru holes in tile, naturalstone and concrete –quickly and cleanly

AIRPower

F4 Diamond Chains

AIR Power

Portable water system

2-speed wet/dry

diamond core drill

Air

Hydraulic

Electric, hydraulic andpneumatic hand-held

and rig-mounted modelsand diamond core bits

Concrete Grinders, Vacuums & Mixers