Diamach Catalogue

www.diamach.com.auwww.facebook.com/diamachNic Hoskin 0417 466 [email protected] 02 8324 6358PO Box 198, Northbridge, NSW 156037-49 Alleyne St Chatswood NSW 2067 (By Appointment)

Stoneworking Catalogue

Ziggy working on the Frazer Fountain - Hyde Park.With thanks to HBS Group for use of this photograph

2017

www.diamach.com.au PH: 0417 466 505 Prices Exclude GST, & are subject to change & availability | E.& O.E.

CONTINUOUS RIM For cutting tiles, marble and stone.Strong centre and long life in marble and other tile.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105RIM 105mm Ø x 1.6 x 8 x 20/16 8.00115RIM 105mm Ø x 1.6 x 8 x 20/16 9.00125RIM 125mm Ø x 1.6 x 8 x 20/16 10.00150RIM 150mm Ø x 2.0 x 8 x 20/16 15.00180RIM 180mm Ø x 2.0 x 8 x 20/16 30.00200RIM 200mm Ø x 2.4 x 8 x 20/16 35.00230RIM 230mm Ø x 2.6 x 8 x 20/16 55.00250RIM 250mm Ø x 3.0 x 8 x 20/16 70.00300RIM 300mm Ø x 3.0 x 8 x 20/16 90.00

Call Nic on 0417 466 505 for advice!

J-SLOT For cutting tiles, marble and stone. J-Slot reduces bladetension, providing straighter cuts and better performance. Also knownas music slot blades. Minimal chipping on vitrified, ceramic andporcelain.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105JSLOT 105mm Ø x 1.4 x 8 x 20/16 12.00115JSLOT 115mm Ø x 1.8 x 8 x 22.23/20 14.00125JSLOT 125mm Ø x 1.8 x 8 x 22.23/20 16.00150JSLOT 150mm Ø x 2.0 x 8 x 25.4/22.23 25.00180JSLOT 180mm Ø x 2.0 x 8 x 25.4/22.23 35.00200JSLOT 200mm Ø x 2.0 x 8 x 30.0/25.4 55.00230JSLOT 230mm Ø x 2.0 x 8 x 25.4/22.23 75.00250JSLOT 250mm Ø x 2.0 x 8 x 25.4/22.23 90.00300JSLOT 300mm Ø x 2.2 x 10 x 30.0/25.4 130.00350JSLOT 350mm Ø x 2.2 x 10 x 30.0/25.4 150.00400JSLOT 400mm Ø x 3.0 x 10 x 60/50/25.4 200.00

DIA-MESH For cutting the hardest tile with ease. Uniquereinforced centre for straighter cutting. Ultra-thin for minimal tilewastage and faster cutting. Mesh style for better dry performance,minimal chipping. 10mm high segmentItem No. Diam x Seg W x H x Bore /Bush Price/EA

105DIAMESH 105mm Ø x 1.4 x 10 x 20/16 12.00115DIAMESH 115mm Ø x 1.4 x 10 x 20/16 14.00125DIAMESH 125mm Ø x 1.4 x 10 x 20/16 16.00180DIAMESH 180mm Ø x 1.4 x 10 x 20/16 35.00200DIAMESH 200mm Ø x 1.4 x 10 x 20/16 55.00230DIAMESH 230mm Ø x 1.4 x 10 x 20/16 75.00250DIAMESH 250mm Ø x 1.4 x 40 x 20/16 90.00

GLASS For cutting mosaics and glass. Premium diamond andexcellent cutting characteristics. 10mm high segment

Item No. Diam x Seg W x H x Bore/Bush Price/EA

105GLASS 105mm Ø x 1.0 x 10 x 20/16 15.00125GLASS 125mm Ø x 1.2 x 10 x 22.23/20 20.00150GLASS 150mm Ø x 1.2 x 10 x 25.4/22.23 30.00180GLASS 180mm Ø x 1.4 x 10 x 25.4/22.23 45.00200GLASS 200mm Ø x 1.4 x 10 x 30.0/25.4 55.00230GLASS 230mm Ø x 1.8 x 10 x 25.4/22.23 85.00250GLASS 250mm Ø x 1.5 x 10 x 25.4/22.23 110.00300GLASS 300mm Ø x 1.5 x 10 x 30.0/25.4 150.00350GLASS 350mm Ø x 1.5 x 10 x 30.0/25.4 200.00

DIA-FANG For cutting the hardest tile with ease. Uniquereinforced centre for straighter cutting. Ultra-thin for minimal tilewastage and faster cutting. Fang style for better dry performance andcleaner cuts. 10mm high segmentItem No. Diam x Seg W x H x Bore/Bush Price/EA

105DIA-FANG 105mm Ø x 1.2 x 10 x 22.23/20 14.00115DIA-FANG 115mm Ø x 1.2 x 10 x 22.23/20 16.00125DIA-FANG 125mm Ø x 1.2 x 10 x 22.23/20 19.00

RAZOR For cutting the hardest tile with ease. Unique reinforcedcentre for straighter cutting. Ultra-thin for minimal tile wastage and fastercutting. Turbo style for better dry performance.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105RAZOR 105mm Ø x 1.2 x 7 x 20/16 10.00115RAZOR 115mm Ø x 1.2 x 7 x 22.23/20 12.00125RAZOR 125mm Ø x 1.2 x 7 x 22.23/20 15.00

DIAMACH Pty Ltd - Stoneworking Tools & Equipment - 2017


ELECTROPLATED For cutting tiles, marble and stone.Electroplated for dry cutting. Segmented style with spokes is standard, butwe can supply in other variations.Item No. Diam x Bore/Bush Price/EA

105EPSS 105mm Ø x 20/16 15.00115EPSS 115mm Ø x 22.23/20 18.00125EPSS 125mm Ø x 22.23/20 20.00150EPSS 150mm Ø x 25.4/22.23 35.00180EPSS 180mm Ø x 25.4/22.23 50.00200EPSS 200mm Ø x 30/25.4 65.00230EPSS 230mm Ø x 22.23 75.00250EPSS 250mm Ø x 25.4/22.23 100.00300EPSS 300mm Ø x 30/25.4 120.00350EPSS 350mm Ø x 30/25.4 150.00

TIGER Segmented Turbo Flush Cut BladesFor cutting and shaping stone and concrete. Unique segment designfor faster cooling and better dry cutting performance. Diamondinserts to resist blade jamming and premature wear. M14 threadsuits popular grinders, and the flange can be removed allowing theblade to be used conventionally.Item No. Description Price/EA

125TIGERSBM14 125mm Ø x 22.2mm Bore/M14 25.00150TIGERHBM14 150mm Ø x 22.2mm Bore/M14 35.00180TIGERSBM14 180mm Ø x 22.2mm Bore/M14 45.00230TIGERSBM14 230mm Ø x 22.2mm Bore/M14 85.00

CARVER Blades For shaping and flush cutting stone. Thickercentre so can be used for both cutting and grinding. Very popular withsculptors. Laser Welded. Designed for dry cutting. M14 thread suitspopular angle grinders.Item No. Description Price/EA

125CARVER 125mm Ø 22.2mm Bore/M14 40.00180CARVER 180mm Ø 22.2mm Bore/M14 70.00230CARVER 230mm Ø 22.2mm Bore/M14 100.00

TAIPAN Blades For shaping and flush cutting Marble. Verypopular with sculptors. Electroplated diamond both sides of blade.Designed for dry cutting. M14 thread suits popular angle grinders.Item No. Description Price/Ea

105TAIPAN 105mm Ø 22.2mm Bore/M14 30.00125TAIPAN 125mm Ø 22.2mm Bore/M14 40.00180TAIPAN 180mm Ø 22.2mm Bore/M14 70.00230TAIPAN 230mm Ø 22.2mm Bore/M14 100.00

TIGER Segmented Turbo SB (Soft Bond)For cutting granite, basalt, hard brick, reinforced concrete. Soft bondmatrix ensures fast cutting of hard materials. Unique segment designfor faster cooling and better dry cutting performance. Diamondinserts to resist blade jamming and premature wear.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105TIGERSB 105mm Ø x 2.2 x 8 x 20/16 10.00115TIGERSB 115mm Ø x 2.2 x 8 x 22.23/20 12.00125TIGERSB 125mm Ø x 2.2 x 8 x 22.23/20 15.00150TIGERSB 150mm Ø x 2.4 x 8 x 25.4/22.23 25.00180TIGERSB 180mm Ø x 2.6 x 8 x 25.4/22.23 40.00200TIGERSB 200mm Ø x 2.6 x 10 x 30/25.4 50.00230TIGERSB 230mm Ø x 2.6 x 10 x 22.23 60.00250TIGERSB 250mm Ø x 3.0 x 10 x 230/25.4 90.00

TIGER Segmented Turbo HB (Hard Bond) Forcutting sandstone,concrete block, hebel. Hard bond matrix ensures long lifein abrasive materials. Unique segment design for faster cooling and betterdry cutting performance. Diamond inserts to resist blade jamming andpremature wear.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105TIGERHB 105mm Ø x 2.2 x 8 x 20/16 10.00115TIGERHB 115mm Ø x 2.2 x 8 x 22.23/20 12.00125TIGERHB 125mm Ø x 2.2 x 8 x 22.23/20 15.00150TIGERHB 150mm Ø x 2.4 x 8 x 25.4/22.23 25.00180TIGERHB 180mm Ø x 2.6 x 8 x 25.4/22.23 40.00200TIGERHB 200mm Ø x 2.6 x 10 x 30/25.4 50.00230TIGERHB 230mm Ø x 2.6 x 10 x 22.23 60.00250TIGERHB 250mm Ø x 3.0 x 10 x 30/25.4 90.00



Segmented Diamond Blades For cutting brick,concrete and general masonry. Economical and long lasting in mostmaterials. Wet or dry use.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105SEG 105mm Ø x 1.7 x 8 x 20/16 8.00115SEG 115mm Ø x 1.8 x 8 x 22.23/20 9.00125SEG 125mm Ø x 2.0 x 8 x 22.23/20 10.00150SEG 150mm Ø x 2.4 x 8 x 25.4/22.23 20.00180SEG 180mm Ø x 2.4 x 8 x 25.4/22.23 25.00200SEG 200mm Ø x 2.4 x 8 x 30/25.4 45.00230SEG 230mm Ø x 2.4 x 8 x 22.23 55.00250SEG 250mm Ø x 2.8 x 8 x 30/25.4 65.00300SEG 300mm Ø x 3.0 x 8 x 30/25.4 90.00

Diamond Milling Wheel For milling natural & artificialstone. Used on bridgesaws to calibrate stone. 10mm high x 40mm wideangled diamond segments. Nylon centre to reduce noise & vibration.Premium quality diamond segments, supplied with 60mm bore &reducing bush to 50mm.Item No. Diam x Seg W x H x Bore Price/EA

350MILL40 350mm Ø x 40 x 10 x 60/50 $ 1200.00

Crack Chaser Blades For widening cracks in concretebefore repair. V shape allows for various groove widths. Laser Welded.Designed for dry cutting.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105CRACK6 105mm Ø x 6 x 10 x 20/16 40.00105CRACK10 105mm Ø x 10 x 10 x 20/16 60.00125CRACK6 125mm Ø x 6 x 10 x 22.23 60.00125CRACK10 125mm Ø x 10 x 10 x 22.23 80.00180CRACK6 180mm Ø x 6 x 10 x 22.23 120.00180CRACK10 180mm Ø x 10 x 10 x 22.23 140.00

Contour Sink Cut-Out Blade For cutting out sinks andcurves in granite and other hard stone. Robust construction withdiamond inserts to assist in curve cutting.Item No. Diam x Seg W x H x Bore Price/EA

125CONT 125mm Ø x 4 x 10 x 22.23mm Bore 60.00

TURBO For cutting brick, concrete and general masonry.Economical and long lasting in most materials. Wet or dry use.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105TURBO 105mm Ø x 2.0 x 8 x 20/16 8.00115TURBO 115mm Ø x 2.0 x 8 x 22.23 9.00125TURBO 125mm Ø x 2.0 x 8 x 22.23 10.00150TURBO 150mm Ø x 2.4 x 8 x 25.4 20.00180TURBO 180mm Ø x 2.4 x 8 x 25.4 25.00200TURBO 200mm Ø x 2.4 x 8 x 30/25.4 45.00230TURBO 230mm Ø x 3.0 x 8 x 22.23 55.00250TURBO 250mm Ø x 3.0 x 8 x 25.4 65.00300TURBO 300mm Ø x 3.0x 8 x 30/25.4 90.00

Continuous Rim Porcelain Blades - NEWFor clean cutting the hardest porcelain. Premium Korean quality. Suitmost popular tilesaws.Item No. Diam x Seg W x H x Bore/Bush Price/EA

105POR 105mm Ø x 1.6 x 8 x 20/16 24.00115POR 115mm Ø x 1.6 x 8 x 22.23 28.00125POR 125mm Ø x 1.6 x 8 x 22.23 33.00180POR 180mm Ø x 1.6 x 8 x 25.4 46.00200POR 200mm Ø x 1.6 x 8 x 30 51.00230POR 230mm Ø x 2.0 x 8 x 22.23 59.00250POR 250mm Ø x 2.0 x 8 x 25.4 66.00300POR 300mm Ø x 2.2 x 8 x 30 106.00350POR 350mm Ø x 2.2 x 8 x 30 124.00

Tuck Point Blades For removing mortar joints in brick andstonework. Hard bond for maximum life in very abrasive materials. LaserWelded. Designed for dry cutting. 6 or 10mm Wide segment. STPP Seriesfeature TC inserts for undercut protection and new bond for longer life,Korean made.Item No. Diam x Seg W x H x Bore/Bush Price/EA

STPP105 105mm Ø x 6 x 10 x 20/16 40.00105TUCK10 105mm Ø x 10 x 10 x 20/16 60.00STPP125 125mm Ø x 6 x 10 x 22.23 60.00125TUCK10 125mm Ø x 10 x 10 x 22.23 80.00180TUCK6 180mm Ø x 6 x 10 x 22.23 120.00180TUCK10 180mm Ø x 10 x 10 x 22.23 140.00



Silent Granite Blades Made in Korea. Newsegment design to improve cutting performance. Fast cutting andsmooth cutting. Laminated sandwich core to reduce noise. 20mmSandwich segments for clean cutting. Chip free cutting by narrow slot.

Item No. Description Price/EA

NSVG353220 350D x 3.2W x 20H x 60/50B 330.00NSVG403220 400D x 3.2W x 20H x 60/50B 360.00NSVG453620 450D x 3.6W x 20H x 60/50B 450.00NSVG504020 500D x 4.0W x 20H x 60/50B 565.00

Silent Engineered Stone Blades Made inKorea. Suitable for Caesarstone, Silestone, Technistone and other brands ofengineered stone. Fast speed and chip free clean cutting. Silent blade withlaminated steel core to reduce noise. 20mm high segment.

Item No. Description Price/EANSE303220 300D x 3.2W x 20H x 60/50B 260.00NSE353220 350D x 3.2W x 20H x 60/50B 315.00NSE403220 400D x 3.2W x 20H x 60/50B 375.00NSE453620 450D x 3.6W x 20H x 60/50B 445.00

Silent Marble Blades Made in Korea. Suitable forbridge saws. Noise reduction by sandwich laminated core.

Item No. Description Price/EANSM303210 300D x 3.2W x 10H x 60/50B 200.00NSM353210 350D x 3.2W x 10H x 60/50B 225.00NSM403210 400D x 3.2W x 10H x 60/50B 275.00NSM453610 450D x 3.6W x 10H x 60/50B 355.00NSM504010 500D x 4.0W x 10H x 60/50B 415.00NSW604210 600D x 4.2W x 10H x 60/50B 635.00

Silent Dekton Blades Made in Korea. Suitable forDekton, Neolith and Lapitec. Engineered to cut ultra compact surface.Very narrow slot design minimises the chipping on the sharp edges.Excellent cost performance

Item No. Description Price/EADKQ352810 350D x 2.8W x 10H x 50B 285.00DKQ403010 400D x 3.0W x 10H x 50B 335.00DKQ453210 450D x 3.2W x 10H x 50B 400.00



Sandstone Blades Made in Korea. Hard bond for long lifein abrasive materials. Great performance in all Australian sandstone. 1”bore other sizes and combinations available. Now with T/C undercutprotection


Standard Centre

LSS303210 300D x 3.2W x 10H x 25.4B 135.00LSS353210 350D x 3.2W x 10H x 25.4B 160.00LSS403210 400D x 3.2W x 10H x 25.4B 195.00LSS453610 450D x 3.6W x 10H x 25.4B 250.00Silent CentreLSSS303210 300D x 3.2W x 10H x 25.4B 185.00LSSS353210 350D x 3.2W x 10H x 25.4B 215.00LSSS403210 400D x 3.2W x 10H x 25.4B 265.00

Concrete Blades Made in Korea. PROSPECS Premiumconcrete blade. Long life and fast speed in all concrete. Suits walkbehind machines. 1” bore with pin hole.Item No. Description Price/EA

WCFM353210 350D x 3.2W x 10H x 25.4B 210.00WCFM403210 400D x 3.2W x 10H x 25.4B 250.00WCFM453610 450D x 3.6W x 10H x 25.4B 310.00WCFM504010 500D x 4.0W x 10H x 25.4B 400.00WCFM604210 600D x 4.2W x 10H x 25.4B 500.00WCFM664210 660D x 4.2W x 10H x 25.4B 650.00

Handsaw Blades Made in Korea. Bonds for hard or abrasivematerials. Excellent cutting speed and life. Wet or Dry cutting. Forpetrol cutters. 1” bore, stihl bush available just ask :)


SANDSTONE & ASPHALT

DAH303210 300D x 3.2W x 10H x 25.4B 135.00DAH353210 350D x 3.2W x 10H x 25.4B 160.00DAH403210 400D x 3.2W x 10H x 25.4B 190.00CONCRETEDCH303210 300D x 3.2W x 10H x 25.4B 120.00DCH353210 350D x 3.2W x 10H x 25.4B 140.00DCH403210 400D x 3.2W x 10H x 25.4B 170.00

Hard Brick Blades Made in Korea. HB blades can cut thehardest brick, pavers and stones. Excellent for prestressed concrete orprecast concrete. High grade diamonds and high diamondconcentration. Turbo segments make more fast cutting. Large slots.


Standard CentreDHBRH303210 300D x 3.2W x 10H x 25.4B 165.00DHBRH353210 350D x 3.2W x 10H x 25.4B 185.00DHBRH403210 400D x 3.2W x 10H x 25.4B 225.00DHBRH453210 450D x 3.2W x 10H x 25.4B 290.00DHBRH503610 500D x 3.6W x 10H x 25.4B 315.00Silent CentreSDHBRH303210 300D x 3.2W x 10H x 25.4B 215.00SDHBRH353210 350D x 3.2W x 10H x 25.4B 240.00SDHBRH403210 400D x 3.2W x 10H x 25.4B 300.00SDHBRH453210 450D x 3.2W x 10H x 25.4B 365.00SDHBRH503610 500D x 3.6W x 10H x 25.4B 415.00

Block Blades Made in Korea. For wet or dry cutting concreteblock, green concrete etc. Long life in abrasive materials. 1” bore for mostmachines.Item No. Description Price/EA

Standard Centre

DBRH303210 300D x 3.2W x 10H x 25.4B 140.00DBRH353210 350D x 3.2W x 10H x 25.4B 160.00DBRH403201 400D x 3.2W x 10H x 25.4B 190.00DBRH453210 450D x 3.2W x 10H x 25.4B 250.00DBRH503610 500D x 3.6W x 10H x 25.4B 270.00Silent Centre

SDBRH303210 300D x 3.2W x 10H x 25.4B 190.00SDBRH353210 350D x 3.2W x 10H x 25.4B 215.00SDBRH403210 400D x 3.2W x 10H x 25.4B 270.00SDBRH453210 450D x 3.2W x 10H x 25.4B 330.00SDBRH503610 500D x 3.6W x 10H x 25.4B 375.00

Brick Blades Made in Korea. For cutting common bricks andpavers. A great multi-purpose blade for a bricksaw. Laser welded for wetor dry cutting, 1” bore suits bricksaws.tem No. Description Price/EADUH353207 350D x 3.2W x 7H x 25.4B 90.00DUH403207 400D x 3.2W x 7H x 25.4B 180.00DUH503607 500D x 3.6W x 7H x 25.4B 250.00



Segmented Brick & Concrete Core Drills. For drilling concrete, brick and masonry, and with bonds developed over manyyears to suit Australian conditions and materials. Suitable for use on handheld or stationary machines.Item No. Description Price/EA

12CORECB 12mm Ø x 300mm 1/2” Gas 40.0014CORECB 14mm Ø x 300mm 1/2” Gas 40.0016CORECB 16mm Ø x 300mm 1/2” Gas 40.0018CORECB 18mm Ø x 300mm 1/2” Gas 40.0020CORECB 20mm Ø x 400mm 1-1/4” UNC 40.0022CORECB 22mm Ø x 400mm 1-1/4” UNC 40.0024CORECB 24mm Ø x 400mm 1-1/4” UNC 40.0026CORECB 26mm Ø x 400mm 1-1/4” UNC 40.0028CORECB 28mm Ø x 400mm 1-1/4” UNC 40.0030CORECB 30mm Ø x 400mm 1-1/4” UNC 40.0032CORECB 32mm Ø x 400mm 1-1/4” UNC 45.0036CORECB 36mm Ø x 400mm 1-1/4” UNC 45.0038CORECB 38mm Ø x 400mm 1-1/4” UNC 45.0040CORECB 40mm Ø x 400mm 1-1/4” UNC 50.0042CORECB 42mm Ø x 400mm 1-1/4” UNC 55.0046CORECB 46mm Ø x 400mm 1-1/4” UNC 60.0052CORECB 52mm Ø x 400mm 1-1/4” UNC 65.0056CORECB 56mm Ø x 400mm 1-1/4” UNC 70.0063CORECB 63mm Ø x 400mm 1-1/4” UNC 75.00

Extension Rods. For extending core drills to enable deeperdrilling. Centre water hole.Item No. Description Price/EA

400EXTROD 400mm working length 1-1/4” UNC 50.00

Item No. Description Price/EA66CORECB 66mm Ø x 400mm 1-1/4” UNC 80.0071CORECB 71mm Ø x 400mm 1-1/4” UNC 85.0076CORECB 76mm Ø x 400mm 1-1/4” UNC 90.0080CORECB 80mm Ø x 400mm 1-1/4” UNC 90.0084CORECB 84mm Ø x 400mm 1-1/4” UNC 95.0090CORECB 90mm Ø x 400mm 1-1/4” UNC 100.00102CORECB 102mm Ø x 400mm 1-1/4” UNC 110.00110CORECB 110mm Ø x 400mm 1-1/4” UNC 120.00116CORECB 116mm Ø x 400mm 1-1/4” UNC 130.00127CORECB 127mm Ø x 400mm 1-1/4” UNC 135.00132CORECB 132mm Ø x 400mm 1-1/4” UNC 150.00152CORECB 152mm Ø x 400mm 1-1/4” UNC 180.00165CORECB 165mm Ø x 400mm 1-1/4” UNC 210.00180CORECB 180mm Ø x 400mm 1-1/4” UNC 230.00200CORECB 200mm Ø x 400mm 1-1/4” UNC 240.00230CORECB 230mm Ø x 400mm 1-1/4” UNC 260.00254CORECB 254mm Ø x 400mm 1-1/4” UNC 300.00305CORECB 305mm Ø x 400mm 1-1/4” UNC 350.00

EXTEND-A-CORE: A Revolution in Diamond Core Drills. Choose your barrel length; shorten or lengthen in270mm increments. Choose your head type, for drilling Concrete, Sandstone or Granite. Mix & match heads and tubes for endlesspossibilities…Replace just the worn sections of tube or drilling head when needed. No more wastage of barrels or couplings…Complete core drillingsolution for a fraction of the cost of custom made core drills, and they can be adapted again and again for other coring situations.

Diameter Overall Length Working Length Seg Size (W x H) No. Of Segs Drilling HeadPrice

270mmTube Price

CouplingPrice

Complete Pricewith 1 Tube

25mm 410mm 350mm 4mm x 9mm 3 30 25 12 67

32mm 410mm 350mm 4mm x 9mm 4 42 25 18 85

38mm 410mm 350mm 4mm x 9mm 4 42 25 18 85

51mm 410mm 350mm 4mm x 10mm 5 54 25 18 98

63mm 410mm 350mm 4mm x 10mm 6 66 25 18 109

76mm 410mm 350mm 4mm x 10mm 7 78 30 24 132

89mm 410mm 350mm 4mm x 10mm 8 96 35 24 155

102mm 460mm 400mm 4.5mm x 10mm 10 108 40 30 178

108mm 460mm 400mm 4.5mm x 10mm 10 114 45 30 189

116mm 460mm 400mm 4.5mm x 10mm 10 114 45 30 189

127mm 460mm 400mm 4.5mm x 10mm 10 120 55 42 217

132mm 460mm 400mm 4.5mm x 10mm 12 132 55 42 229

152mm 460mm 400mm 4.5mm x 10mm 12 138 60 42 240

200mm 460mm 400mm 5.5mm x 10mm 14 198 90 50 338



Longreach Stone Core Drills. For drilling granite,concrete, brick and stone. Laser Welded, and with bonds developed overmany years to suit a variety of Granites & other stone.. Now with longer100mm drilling depth, and 10mm high diamond segment for extra longlife. Suitable for use on handheld or stationary machines. M14 Thread foruse on wet feed grinders, or fit an 8mm shank adapter for use dry instandard power drill. These drills also feature a ½” Gas fitting, allowinguse with water swivels or CNC Machinery.Item No. Description (diam x length) Price/EA

6CORESTONE100 6mm Ø x 100mm x M14 & ½” G 20.008CORESTONE100 8mm Ø x 100mm x M14 & ½” G 20.0010CORESTONE100 10mm Ø x 100mm x M14 & ½” G 25.0012CORESTONE100 12mm Ø x 100mm x M14 & ½” G 30.0014CORESTONE100 14mm Ø x 100mm x M14 & ½” G 30.0016CORESTONE100 16mm Ø x 100mm x M14 & ½” G 30.0018CORESTONE100 18mm Ø x 100mm x M14 & ½” G 30.0020CORESTONE100 20mm Ø x 100mm x M14 & ½” G 30.0022CORESTONE100 22mm Ø x 100mm x M14 & ½” G 35.0025CORESTONE100 25mm Ø x 100mm x M14 & ½” G 35.0028CORESTONE100 28mm Ø x 100mm x M14 & ½” G 35.0030CORESTONE100 30mm Ø x 100mm x M14 & ½” G 35.0032CORESTONE100 32mm Ø x 100mm x M14 & ½” G 40.0035CORESTONE100 35mm Ø x 100mm x M14 & ½” G 40.0038CORESTONE100 38mm Ø x 100mm x M14 & ½” G 50.0040CORESTONE100 40mm Ø x 100mm x M14 & ½” G 50.0042CORESTONE100 42mm Ø x 100mm x M14 & ½” G 60.0045CORESTONE100 45mm Ø x 100mm x M14 & ½” G 60.0050CORESTONE100 50mm Ø x 100mm x M14 & ½” G 70.0055CORESTONE100 55mm Ø x 100mm x M14 & ½” G 80.0060CORESTONE100 60mm Ø x 100mm x M14 & ½” G 90.0065CORESTONE100 65mm Ø x 100mm x M14 & ½” G 90.0070CORESTONE100 70mm Ø x 100mm x M14 & ½” G 100.0075CORESTONE100 75mm Ø x 100mm x M14 & ½” G 110.0080CORESTONE100 80mm Ø x 100mm x M14 & ½” G 110.0085CORESTONE100 85mm Ø x 100mm x M14 & ½” G 120.0090CORESTONE100 90mm Ø x 100mm x M14 & ½” G 120.00100CORESTONE100 100mm Ø x 100mm x M14 & ½” G 130.00105CORESTONE100 105mm Ø x 100mm x M14 & ½” G 130.00110CORESTONE100 110mm Ø x 100mm x M14 & ½” G 140.00115CORESTONE100 115mm Ø x 100mm x M14 & ½” G 150.00125CORESTONE100 125mm Ø x 100mm x M14 & ½” G 160.00135CORESTONE100 135mm Ø x 100mm x M14 & ½” G 180.00150CORESTONE100 150mm Ø x 100mm x M14 & ½” G 200.00

Adapters to convert M14 thread to other machines8M14 8mm Shank to M14 3.0010M14 10mm Shank to M14 Heavy Duty 8.0012GM14 1/2” Gas to M14 12.00WSWIVEL Water Swivel 90.00

Granite Segmented Diamond Core Drills. Fordrilling granite, concrete, brick and stone. 60mm drill depth. LaserWelded, and with bonds developed over many years to suit a variety ofGranites. Suitable for use on handheld or stationary machines. M14 &1/2” Gas threads as standard, adapters available to suit any machine.Item No. Description (diam x seg H & W) Price/EA

6COREGR 6mm Ø x 8 x 1.5 x M14 & ½”G 17.008COREGR 8mm Ø x 8 x 2.0 x M14 & ½”G 17.0010COREGR 10mm Ø x 10 x 2.0 x M14 & ½”G 18.0012COREGR 12mm Ø x 10 x 2.5 x M14 & ½”G 20.0014COREGR 14mm Ø x 10 x 2.5 x M14 & ½”G 21.0016COREGR 16mm Ø x 10 x 2.5 x M14 & ½”G 22.0018COREGR 18mm Ø x 10 x 2.5 x M14 & ½”G 23.0020COREGR 20mm Ø x 10 x 2.5 x M14 & ½”G 24.0022COREGR 22mm Ø x 10 x 2.5 x M14 & ½”G 24.0025COREGR 25mm Ø x 10 x 2.5 x M14 & ½”G 25.0028COREGR 28mm Ø x 10 x 2.5 x M14 & ½”G 28.0030COREGR 30mm Ø x 10x 2.5 x M14 & ½”G 30.0032COREGR 32mm Ø x 10 x 3.0 x M14 & ½”G 32.0035COREGR 35mm Ø x 10 x 3.0 x M14 & ½”G 35.0038COREGR 38mm Ø x 10 x 3.0 x M14 & ½”G 38.0040COREGR 40mm Ø x 10 x 3.0 x M14 & ½”G 40.0042COREGR 42mm Ø x 10 x 3.0 x M14 & ½”G 42.0045COREGR 45mm Ø x 10 x 3.0 x M14 & ½”G 45.0050COREGR 50mm Ø x 10 x 3.0 x M14 & ½”G 50.0055COREGR 55mm Ø x 10 x 3.0 x M14 & ½”G 55.0060COREGR 60mm Ø x 10 x 3.0 x M14 & ½”G 60.0065COREGR 65mm Ø x 10 x 3.0 x M14 & ½”G 65.0070COREGR 70mm Ø x 10 x 3.0 x M14 & ½”G 70.0075COREGR 75mm Ø x 10 x 3.0 x M14 & ½”G 75.0080COREGR 80mm Ø x 10 x 3.0 x M14 & ½”G 80.0085COREGR 85mm Ø x 10 x 3.0 x M14 & ½”G 85.0090COREGR 90mm Ø x 10 x 3.0 x M14 & ½”G 90.00100COREGR 100mm Ø x 10 x 3.5 x M14 & ½”G 100.00110COREGR 110mm Ø x 10 x 3.5 x M14 & ½”G 110.00115COREGR 115mm Ø x 10 x 3.5 x M14 & ½”G 115.00125COREGR 125mm Ø x 10 x 3.5 x M14 & ½”G 125.00145COREGR 145mm Ø x 10 x 3.5 x M14 & ½”G 145.00152COREGR 152mm Ø x 10 x 3.5 x M14 & ½”G 152.00



Marble Electroplated Diamond Core Drills.For drilling marble and tile. Suitable for use on handheld or stationarymachines. M14 thread as standard, adapters available to suit anymachine. 40mm drill depth.Item No. Description Price/EA

12COREMB 12mm Ø x M14 10.0014COREMB 14mm Ø x M14 11.0016COREMB 16mm Ø x M14 13.0018COREMB 18mm Ø x M14 14.0020COREMB 20mm Ø x M14 16.0022COREMB 22mm Ø x M14 17.0024COREMB 24mm Ø x M14 19.0026COREMB 26mm Ø x M14 21.0028COREMB 28mm Ø x M14 22.0030COREMB 30mm Ø x M14 24.0032COREMB 32mm Ø x M14 26.0035COREMB 35mm Ø x M14 28.0038COREMB 38mm Ø x M14 30.0040COREMB 40mm Ø x M14 32.0042COREMB 42mm Ø x M14 34.0045COREMB 45mm Ø x M14 36.0050COREMB 50mm Ø x M14 40.0055COREMB 55mm Ø x M14 44.0060COREMB 60mm Ø x M14 48.0065COREMB 65mm Ø x M14 52.0070COREMB 70mm Ø x M14 56.0075COREMB 75mm Ø x M14 60.0080COREMB 80mm Ø x M14 64.0085COREMB 85mm Ø x M14 85.0090COREMB 90mm Ø x M14 90.00100COREMB 100mm Ø x M14 100.00110COREMB 110mm Ø x M14 110.00115COREMB 115mm Ø x M14 115.00

MultiCore Vacuum Brazed Diamond CoreDrills. For drilling any stone. Suitable for use on handheld orstationary machines. 40mm drill depth, M14 thread as standard,adapters available to suit any machine.Item No. Description Price/EA

6COREMULTI 6mm Ø x M14 14.008COREMULTI 8mm Ø x M14 14.0010COREMULTI 10mm Ø x M14 14.0012COREMULTI 12mm Ø x M14 14.0014COREMULTI 14mm Ø x M14 14.0016COREMULTI 16mm Ø x M14 16.0018COREMULTI 18mm Ø x M14 18.0020COREMULTI 20mm Ø x M14 20.0022COREMULTI 22mm Ø x M14 22.0024COREMULTI 24mm Ø x M14 24.0026COREMULTI 26mm Ø x M14 26.0028COREMULTI 28mm Ø x M14 28.0030COREMULTI 30mm Ø x M14 30.0032COREMULTI 32mm Ø x M14 32.0035COREMULTI 35mm Ø x M14 35.0038COREMULTI 38mm Ø x M14 38.0040COREMULTI 40mm Ø x M14 40.0042COREMULTI 42mm Ø x M14 42.0045COREMULTI 45mm Ø x M14 45.0050COREMULTI 50mm Ø x M14 50.0055COREMULTI 55mm Ø x M14 55.0060COREMULTI 60mm Ø x M14 60.0065COREMULTI 65mm Ø x M14 65.0070COREMULTI 70mm Ø x M14 70.0075COREMULTI 75mm Ø x M14 75.0080COREMULTI 80mm Ø x M14 80.0085COREMULTI 85mm Ø x M14 85.00

ADI Sintered Diamond Pin Drills. For drillingany stone. 10mm shank. Premium ADI Italian quality. Ideal for tactilework. Wet drilling recommended on a high speed drill.Item No. Diameter Price/EA

5ADIPIN 5mm 25.006ADIPIN 6mm 27.007ADIPIN 7mm 30.008ADIPIN 8mm 34.0010ADIPIN 10mm 40.0012ADIPIN 12mm 48.00ADAPTER12G10 ½” Gas to 48.00 10mm F Adapter

DIAMACH Sintered Diamond Pin Drills.For drilling any stone. 10mm shank. Premium Korean quality.Ideal for tactile work. Wet drilling recommended on a high speeddrill.Item No. Diameter Price/EA

SKN06 6mm 27.00SKN08 8mm 34.00

DIAMACH ECO Sintered DiamondPin Drills. For drilling any stone. 10mm shank. Greatfor general purpose drilling. Ideal for tactile work. Wetdrilling recommended on a high speed drill.Item No. Diameter Price/EA

6ECOPIN 6mm 10.008ECOPIN 8mm 12.00



Coating Removal Diamond Cup Wheels. Idealfor glue removal, membrane and epoxy grinding. Won’t clog and heat upresins. Use in conjunction with other floor grinding wheels.Item No. Description Price/EA

PCDCUP: for removal of soft coatings and epoxies. Huge 6mm PCD’s formaximum efficiency. Removeable M14 flange.125PCDCUP6 125 x 6 PCD x 22.2mm/M14 80.00180PCDCUP6+3 180 x 6 PCD + 3 Diamond Seg M14 160.00180PCDCUP6RP 180 x 6 PCD Replaceable PCD’s 180.00180PCDRP 180mm Replaceable PCD Ring 80.00ARROWCUP: Unique arrow shaped diamond segments for rapid removal.16 Grit125ARROW 125 x 6 Segments M14 80.00180ARROW 180 x 6 Segments M14 140.00

Resin Filled Diamond Cup Wheels Resin filled forsmooth grinding. Ideal for use on bevel edge or delicate materials. M14thread suits most popular grinders. Perfectly balanced. Colour coded &engraved for easy identification. Made in Korea. Wet use recommended.Item No. Description Price/EA

RFCC100 100mm # 30 Grit (Coarse) 68.00RFCM100 100mm # 60 Grit (Medium) 68.00RFCF100 100mm # 120 Grit (Fine) 68.00

Dust Shroud For dust extraction when grinding. The steelversion has a replaceable rubber ring (included), and multiple adaptersto suit almost all angle grinders.Item No. Description Price/EA

100RENEGADE 100mm Steel Shroud Rubber Ring 55.00125RENEGADE 125mm Steel Shroud Rubber Ring 75.00180RENEGADE 180mm Steel Shroud Rubber Ring 100.00

250mm Floor Grinding Cup Wheels Suitslarger floor grinding machines. 25.4mm bore. Premium 10mm highsegments.Item No. Description Price/EA

250WHITE White 9 Segs Grit 30/40#, Hard Bond 195.00250BROWN Brown 6 Segs Grit 30/40#, Soft Bond 150.00250BLACK Black 8 Segs Grit 16#, Soft Bond 210.00

150mm Floor Grinding Cup Wheels Suitspremium handheld floor grinding machine with dust extraction. 150mmdiameter with 19mm bore. Lightweight and excellent performance.Aggressive 16 grit diamond, also available in grits up to # 200Item No. Description Price/EA

150SEGCUP#16S 150mm Soft Bond 100.00150SEGCUP#16M 150mm Medium Bond 100.00150SEGCUP#16H 150mm Hard Bond 100.00



Angle Grinder Diamond Cup Wheels For grinding stone. Suitable foruse on handheld or stationary machines. Removeable M14 threaded flange as standard,which can be removed to utilize the standard bore.Item No. Description Price/EA

SINGLE ROW (SRCUP): Single row cup wheels offer an economical grinding solution.Aggressive grinding speeds in concrete, stone and masonry. Also ideal for lower poweredmachines due to lighter weight. #16 Grit standard, other grits available.105SRCUP#16 105mm Ø x 5 x 8 seg x #16 Grit x 20.0mm 20.00125SRCUP#16 125mm Ø x 5 x 10 seg x #16 Grit x 22.2mm 30.00180SRCUP#16 180mm Ø x 5 x 13 seg x #16 Grit x 22.2mm/M14 60.00

DOUBLE ROW (DRCUP): Double row cup wheels are an excellent and economical way to grinda variety of hard materials such as concrete, stone and masonry. #16 Grit standard, other gritsavailable.105DRCUP#16 105mm Ø x 5 x 12 seg x #16 Grit x 20.0 25.00125DRCUP#16 125mm Ø x 5 x 20 seg x #16 Grit x 22.2/M14 45.00180DRCUP#16 180mm Ø x 5 x 26 seg x #16 Grit x 22.2/M14 90.00

TURBO CUP (TCUP): Ideal for smoothing and shaping, excellent choice for finishing granite,marble, tile and concrete materials.105TCUP#16 105mm Ø x 5 x #16 Grit x 22.2 30.00125TCUP#16 125mm Ø x 5 x #16 Grit x 22.2/M14 60.00180TCUP#16 125mm Ø x 5 x #16 Grit x 22.2/M14 90.00105TCUP#30 105mm Ø x 5 x #30 Grit x 22.2 30.00125TCUP#30 125mm Ø x 5 x #30 Grit x 22.2/M14 60.00180TCUP#30 180mm Ø x 5 x #30 Grit x 22.2/M14 90.00105TCUP#60 105mm Ø x 5 x #60 Grit x 22.2 30.00125TCUP#60 125mm Ø x 5 x #60 Grit x 22.2/M14 60.00180TCUP#60 180mm Ø x 5 x #60 Grit x 22.2/M14 90.00105TCUP#120 105mm Ø x 5 x #120 Grit x 22.2 30.00125TCUP#120 125mm Ø x 5 x #120 Grit x 22.2/M14 60.00180TCUP#120 180mm Ø x 5 x #120 Grit x 22.2/M14 90.00

FAN CUP (FANCUP): This fan shaped segmented cup wheel is designed for fast and balancedgrinding in abrasive sandstone or soft concrete. Hard bond for longer life, lightweight forbetter control.125FANCUP#16 125mm Ø x 14 seg 8mm high #16 Grit x 22.2mm/M14 80.00

ALLOY CUP (ALCUP): Alloy body for light weight, ideal for natural stone.105TCUPAL#30 105mm Ø x 5 x #30 Grit x M14 60.00105T0CUPAL#60 105mm Ø x 5 x #60 Grit x M14 60.00105TCUPAL#120 105mm Ø x 5 x #120 Grit x M14 60.00105TCUPALCVX 105mm Ø Convex (curved face) x M14 100.00125TCUPAL#30 125mm Ø x 5 x #30 Grit x M14 80.00125TCUPAL#60 125mm Ø x 5 x #60 Grit x M14 80.00125TCUPAL#120 125mm Ø x 5 x #120 Grit x M14 80.00PREMIUM ALLOY CUP (TCA): Made in Korea. Alloy body for light weight, perfectly balanced,ideal for hard natural stone. Wet or Dry grinding.TCAA100 100mm Ø Aggresive Grit x M14 74.00TCAC100 100mm Ø Coarse Grit x M14 70.00TCAM100 100mm Ø Medium Grit x M14 68.00TCAF100 100mm Ø Fine Grit x M14 68.00125TCAC 125mm Ø Coarse Grit x M14 147.00125TCAM 125mm Ø Medium Grit x M14 147.00125TCAF 125mm Ø Fine Grit x M14 147.00



180mm Grinding Cup Wheels. For grinding and coating removal. Suitable for useon handheld or stationary machines. M14 threaded flange is removeable to utilize a standard bore.

DOUBLE ROW CUP (DRCUP): Double row cup wheels are an excellent and economical way to grind a varietyof hard materials such as concrete, stone and masonry.180DRCUP#16M #16 Grit x Medium Bond 90.00

FANCUP Fan type cup wheels for maximum grinding and cutting efficiency. They provide aggressive surfacepreparation, and are also long lasting due to more diamond surface area. Features removable M14 flange, sothe wheel can be used on many different machines180FANCUP#16H #16 Grit x Hard Bond 120.00180FANCUP#16M #16 Grit x Medium Bond 120.00180FANCUP#16S #16 Grit x Soft Bond 120.00180FANCUP#30H #30 Grit x Hard Bond 120.00180FANCUP#30M #30 Grit x Medium Bond 120.00180FANCUP#30S #30 Grit x Soft Bond 120.00180FANCUP#60H #60 Grit x Hard Bond 120.00180FANCUP#60M #60 Grit x Medium Bond 120.00180FANCUP#60S #60 Grit x Soft Bond 120.00

Mini Turbo Diamond Saw Blades with 6mm shaft.Turbo style for dry cutting. Ideal for joint or grout cutting.


50MINIT 50mm Mini Turbo 20.0065MINIT 65mm Mini Turbo 25.0080MINIT 80mm Mini Turbo 30.00

Profiling Blades heavy duty blades mounted on 6mm shaft for grinding and sculpting. Laserwelded for granite.Item No. Description Price/EA

PMBB20 20mm x 2mm 26.00PMBB30 30mm x 2mm 27.00PMBB40 40mm x 3mm 36.00PMBB50 50mm x 5mm 42.00

17” 430mm Diamond Cleaning Pads Highperformance floor care product to meet the new trend to maintainshiny floors. Diamond coated floor pad for cleaning and maintenancemarble, granite polished concrete and terrazzo. Can be used withoutwater. 10 times longer lasting than ordinary floor pad. No need forchemicals or waxes. Use with rotary or auto scrubber or high speedburnisher. 7” (180mm) to 28” (710mm) availableItem No. Description RPM Price/EA

DCP171 No. 1 # 400 grit 150~1500 45.00DCP172 No. 2 # 800 grit 150~1500 45.00DCP173 No. 3 # 1500 grit 3000 45.00DCP174 No. 4 # 3000 grit 3000 45.00DCP175 No. 5 Buff 3000 45.00

DCP No.1: For restoration of heavily worn stone and concrete floors. Effectively remove scratches and stains on the floors and clean dirty surface.DCP No.2: To remove fine scratches on the floors and leave a clean surface for next step.DCP No.3: This step makes the floor to be prepared shining of stone floor. The concrete floor start to shine.DCP No.4: This step makes shining surface of concrete floor. Well prepared for shining of granite and marble.DCP No.5: Final step which will bring the surface to a mirror look. You can maintain the high gloss floor regularly without any wax or chemical.Suitable for high speed polishing of polished concrete, granite, marble and terrazzo.

Mini Cup Wheel with M14 thread. Ideal for tight spots, cornersand detail grinding. Premium quality for Granite.Item No. Description Price/EA

MCW2 50mm x M14 55.00



Diamond Segment Shoe. Screw on type. For grinding Natural Stone, Concrete &Terrazzo. Premium quality Korean made, with very accurate grits and great performance.

Item No. Grit Price/EADOUBLE SEGMENT RECTANGULAR (DRY) 40 x 10 x 10mm segmentDNST30 #30/40 51.00DNST40 #40/50 51.00DNST60 #60/80 51.00DNST120 #120/150 51.00

Diamond Redi-Lock Med/Hard Concrete Shoe. FitsHUSQVARNA Grinder. For grinding Med/Hard Concrete. Premium quality Korean made, with veryaccurate grits and great performance. BLUE

Item No. Grit Price/EADOUBLE TURBO SEGMENT (DRY)HQTHC20 #20320 33.00HQTHC30 #30/40 30.00HQTHC60 #60/80 30.00HQTHC120 #120/150 30.00

Diamond Redi-Lock Extra Hard Concrete Shoe. FitsHUSQVARNA Grinder. For grinding Extra Hard Concrete. Premium quality Korean made, with veryaccurate grits and great performance. YELLOW

Item No. Grit Price/EADOUBLE TURBO SEGMENT (DRY)HQTUC18 #18/20 42.00HQTUC20 #20/30 40.00HQTUC30 #30/40 38.00HQTUC60 #60/80 38.00HQTUC120 #120/150 38.00

EQ Magnetic System. Convert your existingmachine to our economical yet high Korean quality EQ magnetic system.

Item No. Diameter Grinder Attachments Price/EAEQH180-3T 7” 180mm HTC 420 3 trapezoids 255.00EQH 230-3T3R 9” 230mm HTC 500,660 3 trapezoids + 3 rounds 285.00EQH230-6T 9” 230mm HTC 500,650 6 trapezoids 285.00EQH270-3T3R 10 5/8” 270mm HTC800,950 3 trapezoids + 3 rounds 285.00EQH270-6T 10 5/8” 270mm HTC800,950 6 trapezoids (pictured) 325.00EQQ270-6T 10 5/8” 270mm Husqvarna 820 6 trapezoids 325.00

Diamond Magenetic EQ Segment Shoe.Fits HUSQVARNA Grinder. For grinding Extra Hard Concrete. Premium qualityKorean made, with very accurate grits and great performance. 40 x 10 x 10mmsegment.

Item No. Grit Price/EAHARD CONCRETEMDHC18 #18/20 38.00MDHC30 #30/40 32.00MDHC60 #60/80 32.00MDHC120 #120/150 32.00MEDIUM CONCRETEMDMC18 #18/20 38.00MDMC30 #30/40 32.00MDMC60 #60/80 32.00MDMC120 #120/150 32.00

YES! We can supply:DiaMag for DIAMATIC Grinders

Bauta Shoe for SCANMASKIN GrindersRedi-Lock Shoe for HUQSQVARNA Grinders

QC Shoe for LAVINAQCS Shoe for SASE Grinders

Plug N Go Shoe for WERKMASTER

Many more styles& bonds

available…

Full range includesPCD’s, velcro pad

holders etc



Diamond Latloc Plugs. For floorgrinding machines. 50mm diameter withtaper. Long life and fast grinding.Item No. Description Price/EA

Solid Type, fast, aggressive grinding.PLUGM#16 #16 Grit 90.00PLUGM#30 #30 Grit 80.00PLUGM#60 #60 Grit 80.00PLUGM#120 #120 Grit 80.00Segmented Type, larger surface are for longerlife than solid plugs.PLUGSEG#16 #16 Grit 90.00PLUGSEG#30 #30 Grit 80.00PLUGSEG#60 #60 Grit 80.00PLUGSEG#120 #120 Grit 80.00PCD Type, for coating removal including tileglue, epoxy, membranes etc.PLUGPCD2 2 PCD, 1 Button 120.00

Diamond Cassani Stones. Fortraditional machines. Long life and fast grinding.Many bonds and segment configurations available.Also retipping of existing plates.Item No. Description Price/EA

CASSANIM#30 #30 Grit 90.00CASSANIM#60 #60 Grit 90.00CASSANIM#120 #120 Grit 90.00

Diamond Wedge Blocks. ForMasterFinish and similar machines. Long life and fastgrindingItem No. Description Price/EA

WEDGEM#16 #16 Grit 60.00WEDGEM#30 #30 Grit 50.00WEDGEM#60 #60 Grit 50.00

Diamond Frankfurt Blocks For Floorgrinding machines. Long life and fast grinding.Item No. Description Price/EA

GraniteFRANKG#16 #16 Grit 70.00FRANKG#30 #30 Grit 70.00FRANKG#60 #60 Grit 70.00FRANKG#120 #120 Grit 70.00Marble/TerrazzoFRANKM#16 #16 Grit 70.00FRANKM#30 #30 Grit 70.00FRANKM#60 #60 Grit 70.00FRANKM#120 #120 Grit 70.00

250mm Diamond Plates. For Jennymachines. Long life and fast polishing.Item No. Description Price/EA

250JENNY#50M #50 Grit Metal 250.00250JENNY#100M #100 Grit Metal 200.00250JENNY#200M #200 Grit Metal 200.00250JENNY#200R #200 Grit Resin 180.00250JENNY#400R #400 Grit Resin 180.00250JENNY#800R #800 Grit Resin 180.00250JENNY#1500R #1500 Grit Resin 180.00250JENNY#3000R #3000 Grit Resin 180.00

Cretemower PlateFor concrete grinding. 20 segmentd 40 x 10 x 10mm for maximum life.30 grit for aggressive grinding


CRETE20#30 250mm 20 Seg # 30 240.00

Diamond Finger BitsFor CNC Machinery. Coarse, Medium or Fineavailable. 1/2” Gas fitting


20FINGER50 20mm Ø x 50mm 60.0025FINGER50 25mm Ø x 50mm 60.00

½” Shank Vacuum BrazedDiamond Profile Routers. Thevacuum brazed diamond router bits with 1/2"shank are to be used with wood routers and CNCmachines for profiling granite, marble and othertypes of stones. The router bits have 30/40 gritdiamond for fast edge profiling and feature atracer bearing for easy use.Item No. Description Price/EA

12ROUTST12 12mm Straight 35.003ROUTHB12 3mm ½ Bullnose 40.006ROUTHB12 6mm ½ Bullnose 40.0010ROUTHB12 10mm ½ Bullnose 50.0020ROUTHB12 20mm ½ Bullnose 60.0020ROUTOG12 20mm Ogee 60.0045ROUT12 45 Degree 40.00



SANWA KENMA TWINCUR 125mm EG-2Edge Polishing Wheels Made for straight and bevel edgepolishing with automatic edge polishing machines, single or multi-head.These wheels are unique in that they only require up to the 3000 grit tosuccessfully polish the edge. 5" diameter with Snail-lock backing. Usedon: Bremor, Commandulli, Park Industries, Marmo Meccanica, Loffler andothers.Item No. Description Price/EA

130TWINCUREG80 #80 Grit 80.00130TWINCUREG150 #150 Grit 80.00130TWINCUREG300 #300 Grit 80.00130TWINCUREG500 #500 Grit 80.00130TWINCUREG1000 #1000 Grit 80.00130TWINCUREG2000 #2000 Grit 80.00130TWINCUREG3000 #3000 Grit 80.00

Sintered Diamond Profile Routers.Economical profile shaping wheel for use on most popular stonerouting machines with 22.2mm boss. Comes complete with rotatingcentral bearing & machined fixing bolt.Item No. Description Price/EA

20ROUTV22 20mm Bullnose 380.0030ROUTV22 30mm Bullnose 420.0035ROUTV22 35mm Bullnose 480.0040ROUTV22 40mm Bullnose 480.0050ROUTV22 50mm Bullnose 580.0020ROUTF22 20mm Ogee 280.00

SANWA KENMA TWINCUR 100mm ResinAP Edge Polishing Wheels These revolutionarywheels convert your automatic edge-polishing machine into state ofthe art high production equipment. A wide range of grits and variablebond types let you master any demanding application where a goodquality finish is required in a short amount of time.Item No. Description Price/EA

100TWINCURAP50 #50 Grit 108.00100TWINCURAP100 #100 Grit 108.00100TWINCURAP200 #200 Grit 108.00100TWINCUREG500 #500 Grit 108.00100TWINCUREG1000 #1000 Grit 108.00100TWINCUREG2000 #2000 Grit 108.00100TWINCUREG3000 #3000 Grit 108.00100TWINCUREGBLK #Black Final Grit 108.00

Sintered Sculpting Tools.With 6mm shaft. Ideal for shaping all typesof stone. Sintered for longer life in softstone. Various shapes for intricate carving.Item No. Description Price/EA

M130101 Ø10 x 20 17.00M130102 Ø14 x 20 x R7 18.00M130103 Ø15 x 20/18º 18.00M130104 Ø20 x 20/24º 33.00M130105 Ø20 27.00M130106 Ø25/10 x 10 32.00M130107 Ø35 x 5 32.00

M14 Threaded Vacuum Brazed DiamondProfile Routers. These vacuum brazed diamond hand profilers/ hand router bits are designed to produce perfect roundovers, bevel,ogee and full bullnose edges on natural or engineered stone, porcelaintiles and concrete countertops. With a M14 thread they can be used onany variable speed grinders or polishers, plus they feature an internalwater feed for optimum cooling of the bit. A guide on the top of the bitrides on the surface of the stone and a rotary toucher controls the depthof cut for consistent shaping. Optimal speed for operation of the profilersis 3000 RPM. Half Bullnose & Ogee availableItem No. Description Price/EA

20ROUTVM14 20mm Bullnose 160.0030ROUTVM14 30mm Bullnose 210.0035ROUTVM14 35mm Bullnose 230.0040ROUTVM14 40mm Bullnose 260.0050ROUTVM14 50mm Bullnose 300.0020ROUTFM14 20mm Ogee 160.00

Also available inMagnetic Tornado

Fitting - sameprice



Drainage Groove Sink Drainboard Wheels.With 22.23mm bore to suit a standard angle grinder or “handlebar”machine. Cuts a ½” wide (6.35mmR) groove in granite and other stonebenchtops. In segmented for initial grooving, vacuum brazed forsmoothing and resin for polishing.Item No. Description Price/EA

100GROOVESEG Segmented 90.00100GROOVEVB Vacuum Brazed 70.00100GROOVE#50 Resin Bond #50 50.00100GROOVE#100 Resin Bond #100 50.00100GROOVE#200 Resin Bond #200 50.00100GROOVE#400 Resin Bond #400 50.00100GROOVE#800 Resin Bond #800 50.00100GROOVE#1500 Resin Bond #1500 50.00100GROVE#3000 Resin Bond #3000 50.00

Diamond Sanding Blocks. For faster sanding andpolishing of all types of stone and concrete. Colour coded for easyidentification. Ergonomic 90 x 55mm size. Metal bond in coarser grits.Item No. Description Price/EA

DIABLOCK#60 #60 Grit 20.00DIABLOCK#120 #120 Grit 20.00DIABLOCK#200 #200 Grit 20.00DIABLOCK#400 #400 Grit 20.00DIABLOCK#800 #800 Grit 20.00DIABLOCK#1500 #1500 Grit 20.00DIABLOCK#3000 #3000 Grit 20.00

Diamond Sanding Sheet. For faster sanding andpolishing of all types of stone and concrete. Colour coded for easyidentification. Can be cut to fit sanders. Velcro backed. Larger 100 x100mm size. Metal bond in coarser grits.Item No. Description Price/EA

100DIASHEET#60 #60 Grit 25.00100DIASHEET#120 #120 Grit 25.00100DIASHEET#220 #220 Grit 25.00100DIASHEET#400 #400 Grit 25.00100DIASHEET#800 #800 Grit 25.00100DIASHEET#1800 #1800 Grit 25.00100DIASHEET#3000 #3500 Grit 25.00

20mm Bullnose Diamond Sanding Blocks.For faster bullnosing 20mm stone and concrete. Colour coded for easyidentification. Ergonomic 90 x 55mm size.Item No. Description Price/EA

20BULLDIABLOCK#50 #50 Grit 25.0020BULLDIABLOCK#100 #100 Grit 25.002OBULLDIABLOCK#200 #200 Grit 25.0020BULLDIABLOCK#400 #400 Grit 25.0020BULLDIABLOCK#800 #800 Grit 25.0020BULLDIABLOCK#1500 #1500 Grit 25.0020BULLDIABLOCK#3000 #3000 Grit 25.00





Vacuum Brazed Sculpting Tools. With 6mm shaft. Ideal for shaping all types of stone. Brazed diamond for faster working in allstone. Various shapes for intricate carving.Item No. Description Price/EA

EPP1 # 1 9.00EPP2 # 2 9.00EPP3 # 3 9.00EPP4 # 4 9.00EPP5 # 5 9.00EPP6 # 6 9.00EPP7 # 7 9.00EPP8 # 8 9.00EPP9 # 9 9.00EPP10 # 10 9.00

1 2 3 4 5 6 7 8 9 10

Premium Metal Bond Diamond SandingBlocks. Hand grinding and polishing with water on granite, marble,glass, composites, softstone, terrazzo, gemstone, ceramics and porcelain.Ergonomic 90 x 55mm size. Metal bond and comfortable foam base.Premium Korean quality.Item No. Description Price/EA

HPE060 #60 Grit 25.00HPE100 #100 Grit 25.00HPE200 #200 Grit 25.00HPE400 #400 Grit 25.00HPE800 #800 Grit 25.00HPE1500 #1500 Grit 25.00HPE3000 #3000 Grit 25.00



White Resin Diamond Polishing Pads. For lightcoloured stone. Ideal for use on Engineered Stone, Marble & Concrete.Can be used on handheld wet polishers or adapted to floor polisher use.3mm thick resin for long life.Item No. Description Price/EA

75mm Velcro Backed75POLPADWHT#50 #50 Grit 9.0075POLPADWHT#100 #100 Grit 9.0075POLPADWHT#200 #200 Grit 9.0075POLPADWHT#400 #400 Grit 9.0075POLPADWHT#800 #800 Grit 9.0075POLPADWHT#1500 #1500 Grit 9.0075POLPADWHT#3000 #3000 Grit 9.0075POLPADWHT#BUFF #Buff Grit 9.00100mm Velcro Backed100POLPADWHT#50 #50 Grit 11.00100POLPADWHT#100 #100 Grit 11.00100POLPADWHT#200 #200 Grit 11.00100POLPADWHT#400 #400 Grit 11.00100POLPADWHT#800 #800 Grit 11.00100POLPADWHT#1500 #1500 Grit 11.00100POLPADWHT#3000 #3000 Grit 11.00100POLADWHT#BUFF #Buff Grit 11.00125mm Velcro Backed125POLPADWHT#50 #50 Grit 16.00125POLPADWHT#100 #100 Grit 16.00125POLPADWHT#200 #200 Grit 16.00125POLPADWHT#400 #400 Grit 16.00125POLPADWHT#800 #800 Grit 16.00125POLPADWHT#1500 #1500 Grit 16.00125POLPADWHT#3000 #3000 Grit 16.00125POLPADWHT#BUFF #Buff Grit 16.00180mm Velcro Backed180POLPADWHT#50 #50 Grit 30.00180POLPADWHT#100 #100 Grit 30.00180POLPADWHT#200 #200 Grit 30.00180POLPADWHT#400 #400 Grit 30.00180POLPADWHT#800 #800 Grit 30.00180POLPADWHT#1500 #1500 Grit 30.00180POLPADWHT#3000 #3000 Grit 30.00180POLPADWHT#BUFF #Buff Grit 30.00

Marble Sponge Polishing Pads. Used for polishing Marble & Porcelain Tile. High glosspolishing performance. 100mm diameter x 10mm thick for long life & the ultimate shine! Velcro backed, wet use.4,000RPM recommended.Item No. Description Price/EA

100SPONGEPAD10#50 #50 Grit 10.00100SPONGEPAD10#100 #100 Grit 10.00100SPONGEPAD10#200 #200 Grit 10.00100SPONGEPAD10#400 #400 Grit 10.00100SPONGEPAD10#800 #800 Grit 10.00100SPONGEPAD10#1500 #1500 Grit 10.00100SPONGEPAD10#3000 #3000 Grit 10.00100SPONGEPAD10#6000 #6000 Grit 10.00100SPONGEPAD10#10000 #10000 Grit 10.00



100mm Copper Polishing Pads. For faster polishing.Special bond for the best performance and shine. Colour coded for easyidentification.Item No. Description Price/EA

100POLPADCOP#30 #30 Grit 22.00100POLPADCOP#50 #50 Grit 22.00100POLPADCOP#100 #100 Grit 22.00100POLPADCOP#200 #200 Grit 22.00100POLPADCOP#400 #400 Grit 22.00

HYBRID Wet/Dry Polishing Pads. For polishingconcrete & stone. 3mm thick. Resin bond and work perfectly with orwithout water.Item No. Description Price/EA

100mm Diameter

100POLPADHYB#50 #50 Grit 25.00100POLPADHYB#100 #100 Grit 25.00100POLPADHYB#200 #200 Grit 25.00100POLPADHYB#400 #400 Grit 25.00100POLPADHYB#800 #800 Grit 25.00100POLPADHYB#1500 #1500 Grit 25.00100POLPADHYB#3000 #3000 Grit 25.00

Granite Diamond Polishing Pads. For polishinghard granites. Darker resin to avoid haze during polishing process. 3mmthick resin for long life. Colour coded for easy identification.Item No. Description Price/EA

100mm Velcro Backed100POLPADGR#50 #50 Grit 15.00100POLPADGR#100 #100 Grit 15.00100POLPADGR#200 #200 Grit 15.00100POLPADGR#400 #400 Grit 15.00100POLPADGR#800 #800 Grit 15.00100POLPADGR#1500 #1500 Grit 15.00100POLPADGR#3000 #3000 Grit 15.00100POLPADGR#BLKBUFF #Black Buff 15.00100POLPADGR#WHTBUFF #White Buff 15.00125mm Velcro Backed125POLPADGR#50 #50 Grit 20.00125POLPADGR#100 #200 Grit 20.00125POLPADGR#400 #400 Grit 20.00125POLPADGR#800 #800 Grit 20.00125POLPADGR#1500 #1500 Grit 20.00125POLPADGR#3000 #3000 Grit 20.00125POLPADGR#BLKBUFF #Black Buff 20.00125POLPADGR#WHTBUFF #White Buff 20.00

3-Step Polishing Pads. For polishing stone and concrete withminimum fuss and less pad changes. Colour coded for easy identification.100mm x 2mm. Wet useItem No. Description Price/EA

100POLPAD3S#1 # 1 22.00100POLPAD3S#2 # 2 22.00100POLPAD3S#3 # 3 22.00



MONSTER Hybrid Wet/Dry Concrete Polishing Pads. For polishing concrete. New generation resin bond. Huge5mm thick pad with tapered edges for maximum lifespan. Best value concrete pad on the market. Colour coded and velcro backed for easy use. Andwith white colour they won’t stain, perfect for dry use. Now 7mm thick on the 180mm pads!


100mm x 5mm Thick100POLPADHYBCON#50 #50 Grit 15.00100POLPADHYBCON#100 #100 Grit 15.00100POLPADHYBCON#200 #200 Grit 15.00100POLPADHYBCON#400 #400 Grit 15.00100POLPADHYBCON#800 #800 Grit 15.00100POLPADHYBCON#1500 #1500 Grit 15.00100POLPADHYBCON#3000 #3000 Grit 15.00

125mm x 5mm Thick125MONSTER#50 #50 Grit 25.00125MONSTER#100 #100 Grit 25.00125MONSTER#200 #200 Grit 25.00125MONSTER#400 #400 Grit 25.00125MONSTER#800 #800 Grit 25.00125MONSTER#1500 #1500 Grit 25.00125MONSTER#3000 #3000 Grit 25.00

180mm x 7mm Thick180MONSTER#50 #50 Grit 45.00180MONSTER#100 #100 Grit 45.00180MONSTER#200 #200 Grit 45.00180MONSTER#400 #400 Grit 45.00180MONSTER#800 #800 Grit 45.00180MONSTER#1500 #1500 Grit 45.00180MONSTER#3000 #3000 Grit 45.00

3-Step Wet/Dry White Resin Polishing Pad forEngineered Stone. Very aggressive with long life. Ideal for engineeredstone and tile. Dry use, but can be used with a little water.


100WDPAD3S1 Step 1 11.00100WDPAD3S2 Step 2 11.00100WDPAD3S3 Step 3 11.00

CERAMIC 5 Step Wet Polishing Pads. For polishingmarble and granite. Super flexible. Aggressive dot pattern. 3 times longer lifethan traditional wet pads. Ceramic bond. Wet use only.


100POLPADCER5S1 #1 (200 Grit) 24.00100POLPADCER5S2 #2 (400 Grit) 24.00100POLPADCER5S3 #3 (800 Grit) 24.00100POLPADCER5S4 #4 (1500 Grit) 24.00100POLPADCER5S5 #5 (3000 Grit) 24.00

3-Step Repair Pad. Fast finishing with high shine. Wet use with very littlewater. Restores marble, granite, limestone and concrete surfaces in 3 easysteps…Ideal for DIY and home use. 95-98% gloss level achievable.

tem No. Description Price/EA

100REPAD1 Step 1 27.00100REPAD2 Step 2 27.00100REPAD3 Step 3 27.00



Dry Diamond Polishing Pads. For polishing stone and concrete. Economical, fast polishing, ideal for on-site use, edges etc. Colourcoded for easy identification.Item No. Description Price/EA

100mm Velcro Backed100DRYPAD#50 #50 Grit 15.00100DRYPAD#100 #100 Grit 15.00100DRYPAD#200 #200 Grit 15.00100DRYPAD#400 #400 Grit 15.00100DRYPAD#800 #800 Grit 15.00100DRYPAD#1500 #1500 Grit 15.00100DRYPAD#3000 #3000 Grit 15.00100DRYPAD#BLKBUFF #Black Buff 15.00100DRYPAD#WHTBUFF #White Buff 15.00125mm Velcro Backed125DRYPAD#50 #50 Grit 20.00125DRYPAD#100 #100 Grit 20.00125DRYPAD#200 #200 Grit 20.00125DRYPAD#400 #400 Grit 20.00125DRYPAD#800 #800 Grit 20.00125DRYPAD#1500 #1500 Grit 20.00125DRYPAD#3000 #3000 Grit 20.00125DRYPAD#BLKBUFF #Black Buff 20.00125DRYPAD#WHTBUFF #White Buff 20.00

Electroplated Diamond Polishing Pads. Forpolishing stone and concrete. Incredibly aggressive sanding. Perfect fordry use, but can be used wet. Starts at # 30 grit for fast removal of sawmarks. Colour coded for easy identification.Item No. Description Price/EA

100mm Velcro Backed100POLPADEP#30 #30 Grit 27.00100POLPADEP#60 #60 Grit 22.00100POLPADEP#120 #120 Grit 22.00100POLPADEP#200 #200 Grit 22.00100POLPADEP#400 #400 Grit 22.00125mm Velcro Backed125POLPADEP#30 #30 Grit 36.00125POLPADEP#60 #60 Grit 27.00125POLPADEP#120 #120 Grit 27.00125POLPADEP#200 #200 Grit 27.00125POLPADEP#400 #400 Grit 27.00180mm Velcro Backed180POLPADEP#30 #30 Grit 65.00180POLPADEP#60 #60 Grit 50.00180POLPADEP#120 #120 Grit 50.00180POLPADEP#200 #200 Grit 50.00180POLPADEP#400 #400 Grit 50.00

Gre

at fo

r Sto

ne R

esto

ratio

n!.

Burnishing Pads. For polishing concrete. Available in any diameter.Item No. Description Price/EA

100BURNPAD#0 #0 (30 Grit) 12.00100BURNPAD#1 #1 (50 Grit) 12.00100BURNPAD#2 #2 (150 Grit) 12.00100BURNPAD#3 #3 (500 Grit) 12.00100BURNPAD#4 #4 (1500 Grit) 12.00100BURNPAD#5 #5 (3000 Grit) 12.00



HYBRID Resin Wet/Dry Concrete Floor Polishing Pads. Forpolishing concrete floors. New generation formula. Work perfectly with or without water. Fantasticshine, also suited to darker stone. 3” / 80mm diameter x 10mm thick. Resin BondItem No. Description Price/EA

80FLOORPADHYB#50 #50 Grit 25.0080FLOORPADHYB#100 #100 Grit 25.0080FLOORPADHYB#200 #200 Grit 25.0080FLOORPADHYB#400 #400 Grit 25.0080FLOORPADHYB#800 #800 Grit 25.0080FLOORPADHYB#1500 #1500 Grit 25.0080FLOORPADHYB#3000 #3000 Grit 25.00

Floor Polishing Pads. For polishing stone floors. Feature angled sides to compensate for tile lippage. Incredibly longlasting. Wet use only. Colour coded for easy identification.Item No. Description Price/EA

100mm Velcro Backed. 5mm Thick100FLOORPAD5#50 #50 Grit 30.00100FLOORPAD5#100 #100 Grit 30.00100FLOORPAD5#200 #200 Grit 30.00100FLOORPAD5#400 #400 Grit 30.00100FLOORPAD5#800 #800 Grit 30.00100FLOORPAD5#1500 #1500 Grit 30.00100FLOORPAD5#3000 #3000 Grit 30.00100mm Velcro Backed. 12mm Thick100FLOORPAD12#50 #50 Grit 55.00100FLOORPAD12#100 #100 Grit 55.00100FLOORPAD12#200 #200 Grit 55.00100FLOORPAD12#400 #400 Grit 55.00100FLOORPAD12#800 #800 Grit 55.00100FLOORPAD12#1500 #1500 Grit 55.00100FLOORPAD12#3000 #3000 Grit 55.00

HYBRID Ceramic Wet/Dry Concrete Floor Polishing Pads. Forpolishing concrete floors. Ceramic bond. Work perfectly with or without water. Fantastic shine inconcrete, and quicker than resin’s. 3” / 80mm diameter x 10mm thick. Resin BondItem No. Description Price/EA

80FLOORPADCER#50 #50 Grit 35.0080FLOORPADCER#100 #100 Grit 35.0080FLOORPADCER#200 #200 Grit 35.0080FLOORPADCER#400 #400 Grit 35.0080FLOORPADCER#800 #800 Grit 35.0080FLOORPADCER#1500 #1500 Grit 35.0080FLOORPADCER#3000 #3000 Grit 35.00

HYBRID Metal Wet/Dry Concrete Floor Polishing Pads. Forpolishing concrete floors. Metal bond. Work perfectly with or without water. Fantastic shine inconcrete, and quicker than resin’s. 3” / 80mm diameter x 10mm thick. Resin BondItem No. Description Price/EA

80FLOORPADMET#16 #16 Grit 80.0080FLOORPADMET#30 #30 Grit 60.0080FLOORPADMET#50 #50 Grit 60.0080FLOORPADMET#100 #100 Grit 60.0080FLOORPADMET#200 #200 Grit 60.0080FLOORPADMET#400 #400 Grit 60.00



Convex Diamond Polishing Pads. For polishing curvedsurfaces. Ideal for use on Engineered Stone, Marble & Concrete. Colourcoded for easy identificationItem No. Description Price/EA

75mm Velcro Backed75POLPADCVX#50 #50 Grit 20.0075POLPADCVX#100 #100 Grit 20.0075POLPADCVX#200 #200 Grit 20.0075POLPADCVX#400 #400 Grit 20.0075POLPADCVX#800 #800 Grit 20.0075POLPADCVX#1500 #1500 Grit 20.0075POLPADCVX#3000 #3000 Grit 20.0075POLPADCVX#WBUFF #Buff White 20.0075POLPADCVX#BBUFF #Buff Black 20.00100mm Velcro Backed100POLPADCVX#50 #50 Grit 30.00100POLPADCVX#100 #100 Grit 30.00100POLPADCVX#200 #200 Grit 30.00100POLPADCVX#400 #400 Grit 30.00100POLPADCVX#800 #800 Grit 30.00100POLPADCVX#1500 #1500 Grit 30.00100POLPADCVX#3000 #3000 Grit 30.00100POLPADCVX#WBUFF #Buff White 30.00100POLPADCVX#BBUFF #Buff Black 30.00

Diamond Polishing Drums. Used to polish insideradius such as undermount sink holes. 50mm diameter x 38mm high.Wet polishing will generally result in better shine and the tools willlast longer. With M14 threads, the wet diamond polishing drums canfit on most polishers and variable speed grinders.

Item No. Description Price/EA50DRUM#50 #50 Grit 45.0050DRUM#100 #100 Grit 45.0050DRUM#200 #200 Grit 45.0050DRUM#400 #400 Grit 45.0050DRUM#800 #800 Grit 45.0050DRUM#1500 #1500 Grit 45.0050DRUM#3000 #3000 Grit 45.0050DRUM#SEG Segmented 75.00

PVA (China Disc) Grinding & PolishingWheels For dry polishing marble & tile. 100mm diameter.16mm bore. 8500 RPM Max.Item No. Description Price/EA

100PVA#40 #40 Grit 6.00100PVA#80 #80 Grit 6.00100PVA#120 #120 Grit 6.00100PVA#220 #220 Grit 6.00100PVA#400 #400 Grit 6.00100PVA#600 #600 Grit 6.00

SAIT Silicon Carbide Grinding & PolishingDiscsFor wet or dry polishing marble and similar stones. Premium Italian quality.


125mm Velcro Backed125SAIT#36 #36 Grit 0.90125SAIT#60 #60 Grit 0.80125SAIT#120 #120 Grit 0.80125SAIT#220 #220 Grit 0.80125SAIT#320 #320 Grit 0.80125SAIT#400 #400 Grit 0.80125SAIT#600 #600 Grit 0.80125SAIT#800 #800 Grit 0.80125SAIT#1200 #1200 Grit 0.80180mm Depressed Centre180SAIT#16 #16 Grit 2.50180SAIT#36 #36 Grit 2.50180SAIT#60 #60 Grit 2.50180SAIT#120 #120 Grit 2.50

Carborundum Hand Rubbing Blocks Forshaping and smoothing concrete and stone. 150 x 75 x 50mmItem No. Description Price/EA

CARBOBLOCK#C Coarse 30.00CARBOBLOCK#M Medium 30.00CARBOBLOCK#F Fine 30.00

ZEC Semiflex Grinding & PolishingWheels For dry grinding marble & tile. 100mm diameter. 16mmbore.Item No. Description Price/EA

100ZEC#16 #16 Grit 7.00100ZEC#24 #24 Grit 7.00100ZEC#36 #36 Grit 7.00100ZEC#60 #60 Grit 7.00100ZEC#80 #80 Grit 7.00100ZEC#120 #120 Grit 7.00

Backing Discs for Diamond Polishing Pads. Forattaching polishing pads to machines. M16, 5/8” W also available.Item No. Description Price/EA

75BACKERFM14 75mm Ø Flexible Rubber M14 10.0075BACKERAM14 75mm Ø Rigid Alloy M14 10.00100BACKERFM14 100mm Ø Flexible Rubber M14 15.00100BACKERAM14 100mm Ø Rigid Alloy M14 15.00100BACKERSM14 100mm Ø Soft Foam M14 15.00125BACKERFM14 125mm Ø Flexible Rubber M14 20.00125BACKERAM14 125mm Ø Rigid Alloy M14 20.00125BACKERAM14 125mm Ø Soft Foam M14 20.00180BACKERAM14 180mm Ø Rigid Alloy M14 35.00180BACKERSM14 180mm Ø Soft Foam M14 35.00



Jigsaw Oscillating Blades. Suits universaltype Jigsaws. Electroplated for fine finish, or Vacuum Brazedfor aggressive cutting.Item No. Description Price/EA

75JIGEP 75mm Jigsaw Blade Electroplated 12.00100JIGEP 100mm Jigsaw Blade Electroplated 15.0075JIGVB 75mm Jigsaw Blade Vacuum Brazed 15.00100JIGVB 100mm Jigsaw Blade Vacuum Brazed 20.00

Carborundum Wedge Blocks Forwet or dry grinding concrete & stone. Economicaland fast. Suits MasterFinish and similar machines.Item No. Description Price/EA

WEDGECARBO#16 #16 Grit 8.00WEDGECARBO#24 #24 Grit 8.00WEDGECARBO#36 #36 Grit 8.00WEDGECARBO#60 #60 Grit 8.00WEDGECARBO#80 #80 Grit 8.00WEDGECARBO#120 #120 Grit 8.00

T-Shape Oscillating Blades. SuitsFein Multimaster & similar machines. Ideal for mortarremoval on brickwork & stone walls. Electroplated forfine finish, or Vacuum Brazed for aggressive cutting orelectroplated for finer work.Item No. Description Price/EA

FEINTEP Fein T Blade Electroplated 15.00FEINTVB Fein T Blade Vacuum Brazed 15.00FEINTVBXL Fein T Blade Vacuum Brazed XL 15.00BOSCHT BOSCH T Blade Vacuum Brazed 15.00

LUNA ABRASIVI FrankfurtBlocks For wet/dry grinding concrete &stone. Economical and fast. Magnesite BondItem No. Description Price/EA

FRANKLUNA#16 #16 Grit 3.00FRANKLUNA#24 #24 Grit 3.00FRANKLUNA#30 #30 Grit 3.00FRANKLUNA#46 #46 Grit 3.00FRANKLUNA#60 #60 Grit 3.00FRANKLUNA#80 #80 Grit 3.00FRANKLUNA#120 #120 Grit 3.00FRANKLUNA#180 #180 Grit 3.00FRANKLUNA#220 #220 Grit 3.00FRANKLUNA#320 #320 Grit 3.50FRANKLUNA#400 #400 Grit 3.50FRANKLUNA#600 #600 Grit 4.00FRANKLUNA#800 #800 Grit 4.00FRANKLUNA#1200 #1200 Grit 5.00FRANKLUNA#LUX #LUX Grit 20.00

SICAREX Tornado Magnetic Grinding &Polishing Wheels For wet grinding & polishing marble& granite. Magnetic for fast changing of grits. 100/90mm diametertapered.Item No. Description Price/EA

100TORN#1 #1 (#36) 15.00100TORN#2 #2 (#120) 15.00100TORN#3 #3 (#280) 15.00100TORN#4 #4 (#400) 20.00100TORN#5 #5 (#800) 22.00100TORN#PH #PH (Polish) 45.00100TORN#FELT #Felt (Felt) 54.00

SEBALD Silicon Carbide Grinding &Polishing Wheels For wet or dry grinding & polishingmarble, granite and other stones. Snail Lock attachment.Item No. Description Price/EA100mm Snail Lock Red Dot100SEBALD#24 #24 Grit 14.50100SEBALD#60 #60 Grit 14.50100SEBALD#120 #120 Grit 14.50100SEBALD#220 #220 Grit 16.50100SEBALD#360 #360 Grit 18.00100SEBALD#500 #500 Grit 20.00100SEBALD#WF #White Felt 42.00100SEBALD#BF #Brown Felt 56.00130mm Snail Lock Red Dot130SEBALD#24 #24 Grit 22.00130SEBALD#60 #60 Grit 22.00130SEBALD#120 #120 Grit 22.00130SEBALD#220 #220 Grit 24.50130SEBALD#360 #360 Grit 26.50130SEBALD#500 #500 Grit 30.00130SEBALD#WF #White Felt 65.00130SEBALD#BF #Brown Felt 65.00

Hard Bond Grinding &Polishing Wheels For wet or drygrinding sandstone. Harder bond for longer life.Snail Lock attachment. 130mm diameterItem No. Description Price/EA

130HARDSTONE#36 #36 Grit 16.00130HARDSTONE#60 #60 Grit 16.00130HARDSTONE#120 #120 Grit 16.00130HARDSTONE#220 #220 Grit 18.00



Snail Lock Antiquing Brushes SiliconCarbide Bristle For antiquing stone slab. Filamentbrush. Diamond Bristle available.Item No. Description Price/EA

100mm Snail Lock100ANTSL#24 #24 Grit 25.00100ANTSL#36 #36 Grit 25.00100ANTSL#46 #46 Grit 25.00100ANTSL#60 #60 Grit 25.00100ANTSL#120 #120 Grit 25.00100ANTSL#220 #220 Grit 25.00100ANTSL#360 #360 Grit 25.00100ANTSL#500 #500 Grit 25.00130mm Snail Lock130ANTSL#24 #24 Grit 30.00130ANTSL#36 #36 Grit 30.00130ANTSL#46 #46 Grit 30.00130ANTSL#60 #60 Grit 30.00130ANTSL#120 #120 Grit 30.00130ANTSL#220 #220 Grit 30.00130ANTSL#360 #360 Grit 30.00

Frankfurt Antiquing BrushesSilicon Carbide Bristle Forantiquing stone slab. Diamond Bristle availableItem No. Description Price/EA

FRANKANT#16 #16 Grit 25.00FRANKANT#24 #24 Grit 25.00FRANKANT#36 #36 Grit 25.00FRANKANT#46 #46 Grit 25.00FRANKANT#60 #60 Grit 25.00FRANKANT#80 #80 Grit 25.00FRANKANT#120 #120 Grit 25.00FRANKANT#220 #220 Grit 25.00FRANKANT#320 #320 Grit 25.00

Snail Lock & Magnetic CouplingsFor attaching abrasives to handheld power toolsItem No. Description Price/EA

100mm Diameter100SNAILCOUPM14 Snail Lock M14 Thread 50.00100SNAILCOUP58 Snail Lock 5/8” Thread 50.00Magnetic100BACKERMAGM14 Magnetic M14 150.00130mm Diameter130SNAILCOUPM14 Snail Lock M14 Thread 60.00130SNAILCOUP58 Snail Lock 5/8” Thread 60.00

TENAX Adhesives Italian quality stone adhesives.Item No. Description Price/EA

1TENAXSTRANS 1 Litre Solido Transparente 20.001TENAXFTRANS 1 Litre Fluido Transparente 23.001TENAXSBIANCO 1 Litre Solido Bianco 18.001TENAXSPAG 1 Litre Solido Paglierino 18.001TENAXS1141 1 Litre Solido 1141 Pure White 18.001TENAXS2030 1 Litre Solido 2030 Haze 18.001TENAXS2040 1 Litre Solido 2040 Urban 18.001TENAXS2141 1 Litre Solido 2141 Blizzard 18.001TENAXS2200 1 Litre Solido 2200 Desert 18.001TENAXS2220 1 Litre Solido 2220 Ivory 18.001TENAXS2230 1 Litre Solido 2230 Linen 18.001TENAXS2350 1 Litre Solido 2350 Latte 18.001TENAXS2370 1 Litre Solido 2370 Mocha 18.001TENAXS2750 1 Litre Solido 2750 Sage 18.001TENAXS2400 1 Litre Solido 2400 Champagne 18.001TENAXS3100 1 Litre Solido 3100 Jet Black 18.001TENAXS3141 1 Litre Solido 3141 Glacier 18.001TENAXS3200 1 Litre Solido 3200 Baja 18.001TENAXS3350 1 Litre Solido 3350 Walnut 18.001TENAXS3730 1 Litre Solido 3730 Mangrove 18.001TENAXS4330 1 Litre Solido 4330 Ginger 18.001TENAXS4350 1 Litre Solido 4350 Lagos Blue 18.001TENAXS9141 1 Litre Solido 9141 Ice Snow 18.001TENAXS9241 1 Litre Solido 9241 Almond Rocca 18.001TENAXS9260 1 Litre Solido 9260 White Ash 18.001TENAXTHASSOS 1 Litre Thassos (opaque) 26.401TENAXT8 1 Litre T8 Extra Clear 24.001TENAXMARBLEST 1 Litre Marble Super Transparent 32.00

Polishing Powders & BarsItem No. Description Price/EA

REULIN M: Premium quality polishing powder for Marble & Limestone.2REULINM 2kg Marble Powder 25.005REULINM 5kg Marble Powder 55.00

REULIN H: Premium quality polishing powder for Granite and other hard Stones.2REULINH 2kg Granite Powder 25.005REULINH 5kg Granite Powder 55.005REULINHB 5kg Black Granite Powder 130.00

HYFIN Polishing Paste Bar. White polishing compound for use with calico buffs.HYFIN White Bar 13.00

HARD WAX BAR Buffing Wax. Buffing wax for use with calico buffs. Available inblack or neutral.BLACKWAX Black Wax 28.00NEUTWAX Neutral Wax 28.00

Miscellaneous Stoneworking ConsumablesItem No. Description Price/EA

CHINAGRAPH STAEDTLER Chinagraph Pencils 20.00 Box 10, various coloursARDELLRAZOR ARDELL Single Side Razor Blades 18.00 Pkt 100



TENAX Stone Treatments The original stone sealers.Item No. Description Price/EA

1TENAXHYDREX 1 Litre Hydrex Impregnating Sealer 22.001TENAXAGER 1 Litre Ager Colour Intensifier 65.001TENAXNEROPLUS 1 Litre Neroplus Black Sealer 66.001TENAXUNIBLK2 1 Litre Uniblack 2 Black Restorer 18.001TENAXGEAR 1 Litre Gear Solvent Sealer Gloss 52.00500TENAXJET 500ml Jet Spray Polish 22.001TENAXSOLWAX 1 Litre Solid Wax 19.001TENAXLIQWAX 1 Litre Liquid Wax 20.006TENAXCOLOURSET Colour Set 6 x Tubes 40.00

MEGAPOXY Stone & ConstructionAdhesivesM E G A P O X Y P M is specially formulated structural non-sag epoxy fill-ing paste and adhesive. This easy to use two-part epoxy sets after mixingto an extremely durable adhesive ideal for bonding natural stone, con-crete, steel, timber, glass and masonry.


1MEGAPM 1 Litre Kit PM 32.004MEGAPM 4 Litre Kit PM 80.0020MEGAPM 20 Litre Kit PM 225.00

M E G A P O X Y P F is a rapid set epoxy adhesive which sets in three tofive minutes and attains more than half its ultimate strength within 15minutes of mixing. Megapoxy PF “hardens-as-you-hold-it” for immediateon the spot emergency repairs to tanks, pipes, machinery, concretestructures etc.


1MEGAPF 1 Litre Kit PF 38.004MEGAPF 4 Litre Kit PF 90.0020MEGAPF 20 Litre Kit PF 325.00

M E G A P O X Y 6 9 is a translucent clear non-sag gel type epoxy. Ideal forstructural bonding of metals to metals, metals to concrete and masonry,assembly of granite and marble fabrications, and many other civil engi-neering applications requiring superior bond strengths. MEGAPOXY 69 isalso ideal for structural timber joinery and applications in the marine en-vironment. It retains its high strength after repeated high impact forces.


1MEGA69 1 Litre Kit 69 35.004MEGA69 4 Litre Kit 69 86.0020MEGA69 20 Litre Kit 69 265.00

M E G A P O X Y H is recommended as a suitable high strength materialfor bonding and anchoring steel reinforcement, starter bars and tie barsinto concrete, brick work and stone. MEGAPOXY H is also ideal for seal-ing / waterproofing concrete structures and can be mixed with sand tomake mortar systems. The addition of pigments can also be added forindustrial floor coatings.


4MEGAH 4 Litre Kit H 90.0020MEGAH 20 Litre Kit H 280.00

M E G A B O N D is a high strength two component epoxy adhesive. Mega-bond is easy to use and spreads readily with a notched trowel. Excellentfor bonding natural stone & tiles to all masonry surfaces including ce-ment sheet, cement render, plasterboard, timber and is suitable for bothinterior & exterior applications.


4MEGABOND 4 Litre Kit Megabond 80.0020MEGABOND 20 Litre Kit Megabond 225.00

MEGAPOXY Stone & ConstructionAdhesives Australian made. The most widely used epoxy in thestone industry.M E G A P O X Y H X is recommended as a suitable high strength materialfor bonding and anchoring steel reinforcement, starter bars and tie barsinto concrete, brick work and stone. MEGAPOXY HX is also ideal for seal-ing / waterproofing concrete structures and can be mixed with sand tomake mortar systems. The addition of pigments can also be added for in-dustrial floor coatings. HX is a thinner variation of H.


4MEGAHX 4 Litre Kit HX 90.0020MEGAHX 20 Litre Kit HX 300.00

M E G A P O X Y H T is recommended as a suitable high strength materialfor bonding and anchoring steel reinforcement, starter bars and tie barsinto concrete, brick work and stone. MEGAPOXY HT is also ideal for seal-ing / waterproofing concrete structures and can be mixed with sand tomake mortar systems. The addition of pigments can also be added for in-dustrial floor coatings. HT is a thicker variation of H


4MEGAHT 4 Litre Kit HT 90.0020MEGAHT 20 Litre Kit HT 300.00

M E G A P O X Y P 1 is a two component high strength epoxy paste basedon DGEBA epoxy resin and carbonate free filler. Easy to use, this productsets after mixing with excellent properties for a wide range of applica-tions. Ideal for structural bonding and repairs of precast concrete.


4MEGAP1 4 Litre Kit P1 80.0020MEGAP1 20 Litre Kit P1 225.00

M E G A P O X Y T I N T S for tinting clear Megapoxy products including 69,H, HX, HT. 500ml container. Epoxy based so they don’t change the charac-teristics and strength of the epoxy.


500MEGAWHT 500ml White Tint 20.00500MEGAGRY 500ml Grey Tint 20.00500MEGABLK 500ml Black Tint 20.00500MEGAYEL 500ml Yellow Tint 20.00500MEGABGE 500ml Beige Tint 20.00500MEGARED 500ml Red Tint 20.00500MEGAGRN 500ml Green Tint 20.00



GEAL Basoil Water-and-oil protective forsurface. Does not alter the look and the colour oftreated material. Can be used for cotto,terracotta, natural stone, terrazzo, concrete andall absorbent stone material, both indoor andoutdoor. Completes water-repellent protectionprovided by ICR 17 or Super Idroblock (Geal).Gives anti-stain power against oil and grease.Does not change breathing of material and resiststo detergents.

Item No. Qty Price/EA

GBASOIL5 5 Litre 280.00

GEAL ICR 17 Stops rising damp into floorsand walls. Reduces seepage and protectsunderlaying structures even decayed by cracks.Suitable for the pre-treatment of floor tiles beforegrouting to avoid staining and perimetral damp.Does not yellow, does not change the look and theoriginal breathing capabilities of the stone.Up to 5 times stronger than some traditional stonesealers!


GICR17 5 Litre 216.00

GEAL Marmo Toner solvent basedcolour enhancer for Granite, Marble, BASALT andQUARTZ but it is clear in colour


GMARTONER5 5 Litre 260.00

GEAL Marmo Barrier Protectionagainst stains for natural and artificial stonematerials with low absorption, in particular forpolished Marble and Granite, compact andpolished synthetic Agglomerate, for surfaces andcoverings of any kind and low absorption materials.Item No. Qty Price/EA

GMARBAR5 1 Litre 87.00

GEAL Nereo Solvent based black colourenhancer used for enhancing stone such asGranite, Basalt, Slate and Quartz stone and isperfect for treating badly damaged dark stonesafter acid attack or acid washing.Item No. Qty Price/EA

GNEREO1 1 Litre 70.00

GEAL Pietra Block water based sealersimilar to GEAL Basoil.Item No. Qty Price/EA

GBLOCK1 1 Litre 65.00

GEAL Scudo SCUDO is a very exclusiveproduct engineered to stop water leaking into finehairline crack on stone facades of buildings andbalcony’s made of stone, terracotta, terrazzo oreven porcelain and cement tiles.Item No. Qty Price/EA

GSCUDO1 1 Litre 104.00

GEAL Super Idro Block Suitable toCOTTO and TERRACOTTA and all absorbent stonematerials, concrete and aggregates. Use as a waterrepellent treatment against the rising damp onfloors and coverings indoor and outdoor, even notperfectly dry, where it is not possible to use asolvent-based siloxane water repellent protective.Used as pretreatment before plastering, helpsremoving grouting residues.Item No. Qty Price/EA

GIDROBLOCK5 5 Litre 175.00

GEAL Tio sealer that is UNIVERSAL – SINGLECOMPONENT but it has HYDROREPELLENT in it.Quite unique compared to most other singlecomponent sealers on the market purely for thatreasonItem No. Qty Price/EA

GTIO5 5 Litre 337.00

GEAL Triton Triple action: water repellent,stain and toning . Use on terracotta, and all naturalstones indoor and outdoor. Prevents efflorescence,mould, moisture stains and reduces the absorptionof oils, fat and water. No film and does not alterthe original breathability of the material.Item No. Qty Price/EA

GTRITON1 1 Litre 76.00

GEAL’s treatment is made of 3 phases: Cleaning, Protection, FinishingFull range of GEAL Products, MSDS, Technical Information, video’s and more online at www.diamach.com.au

For the conservation and decay prevention of stone used in civil and monumental construction

GEAL Togli Ruggine Non acid basedrust remover for the removal of rust on delicateMarble, Limestone and slate which are sensitive toacids. This rust remover will not etch marble,Limestone or Slate so it will remove the rustwithout damaging the stone. However this rustremover can be used on all types of stonesincluding Terrazzo and Porcelain.Item No. Qty Price/EA

GESTTOG1 1 Litre 90.00

GEAL Solid Rock Consolidant forLimestone, Sandstone and Slate and can be usedon certain vainy marbles and Basalts. SOLID ROCK isa very well respected product in all of Europebecause has been used on many world famousEuropean and Italian world land marks for theconservation of ANTIQUITY such as stone building300 years old or older


GSROCK 5 Litre 355.00

GEAL CB90 Neutral stone cleaner anddetergant for all natural stones.


CB901 1 Litre 00CB905 5 Litre 00



LITHOFIN Wax-Off Removes layers of wax,sealants, tar, oil stains, lacquer, glue and whiteout. Depositsare dissolved and can then be washed off with water. Ready-to-use. Deep acting. Contains solvents. 5-10m2/ltr.Item No. Qty Price/EA

LWAXOFF1 1 Litre 36.00

LITHOFIN Oil-Ex Removes grease and oil stainsfrom natural and engineered stone. Removes discolourationaround silicon joints and also removes wax. Suitable forpolished stone surfaces. Easy-to-apply gel. Contains solvents.Item No. Qty Price/EA

LOILEX250 250ml 38.00

LITHOFIN Algex Removes and prevents regrowthof algae on stone. Chlorine free. Safe for use on outdoorfurniture and fabrics. 30-200m2/ltr.Item No. Qty Price/EA

LALGEX1 1 Litre 37.00

LITHOFIN MN Stain-Stop PlusImpregnator plus Colour Intensifier makes absorbent stonesurfaces more vivid in colour and at the same time makesthe surface water and oil repellent thereby largelypreventing staining. Specially suitable for rough surfaces.For indoor and outdoor use. No gloss. Long-term effect.Contains solvents. 6-15m2/ltrItem No. Qty Price/EA

LSSTOPP1 1 Litre 84.00LSSSTOPP5 5 Litre 394.00

LITHOFIN MN Stain-Stop ‘ECO’Protects limestone surfaces from the penetration of waterand oil borne stains. The special water based formulationoffers maximum protection, while being quick and easy toapply. Free of solvents. Odourless. Effective for manyyears. Invisible. 4-8m2/ltr.Item No. Qty Price/EA

LECO1 1 Litre 72.00LECO5 5 Litre 325.00

LITHOFIN MN Power Clean For generaland greasy dirt, residues of floor care products, etc. Thisproduct is recommended for all types of natural stone, butespecially for polished marble and limestone. Concentrate.Acid-free, mildly alkaline. Free of solvents. 10-30m2/ltr.Item No. Qty Price/EA

LPCLEAN500 500ml 20.00LPCLEAN1 1 Litre 26.00LPCLEAN5 5 Litre 120.00LPCLEAN10 10 Litre 212.00

LITHOFIN MN Builders Clean Cleansgranite and other natural and engineered stones. Removescement films, dirt residues, blooms, efflorescence, rustdiscolorations. Also acts to prevent rust in hard stonescontaining iron. Not suitable for polished marble, limestoneetc. Concentrate. Contains acid. Minimal odour. 30-50m2/ltr.Item No. Qty Price/EA

LBCLEAN1 1 Litre 25.00LBCLEAN5 5 Litre 116.00LBCLEAN10 10 Litre 208.00

LITHOFIN MN Outdoor CleanerRemoves stubborn green and dark deposits as well as stainscaused by trees or flowers from all natural and artificialstone surfaces. Fast acting. Acid free. Up to 15m2/ltrItem No. Qty Price/EA

LOUTDOOR1 1 Litre 28.00LOUTDOOR5 5 Litre 126.00

LITHOFIN MN Stain-Stop This specialimpregnator optimally protects absorbent, stain-sensitivenatural and engineered stone surfaces against staining.Largely prevents penetration of oil, grease and water andmakes further maintenance easier. Poses no healthconcerns once dry. Also for polished surfaces. Ready touse. For indoor and outdoor use. No gloss. Effective formany years. 7-15m2/ltr.Item No. Qty Price/EA

LSSTOP500 500ml 44.00LSSTOP1 1 Litre 76.00LSSTOP5 5 Litre 368.00LSSTOP10 10 Litre 719.00

LITHOFIN MN Colour IntensifierImproves the appearance of rough, absorbent natural andengineered stone surfaces. Enhances the colours,accentuates the structure, and makes water and dirtrepellent. Ready to use. For indoor and outdoor use. Nogloss. Contains solvents. Ideal for concrete slabs and paversItem No. Qty Price/EA

LCINT1 1 Litre 42.00LCINT5 5 Litre 188.00LCINT10 10 Litre 356.00

LITHOFIN MN Polish (Liquid Wax)For occasional freshening up and polishing of stonesurfaces, provides gloss and protection. Maintains thebeautiful appearance of all polished surfaces. Easy topolish. Contains solvents, CHC-free. For indoor use only.10-20m2/ltr.Item No. Qty Price/EA

LPOLISH1 1 Litre 38.00

LITHOFIN MN Easy-Care Developed forcontinuous care of all types of stone surfaces. Cleans,enhances, and maintains the surface in one action. Coarseand polished surfaces become richer in colour andstructure with regular use. Ideal for impregnated or sealedsurfaces. Concentrate. Very high yield. Does not formlayers. Non-bleaching. Solvent-free.Item No. Qty Price/EA

LECARE1 1 Litre 26.00LECARE5 5 Litre 112.00

LITHOFIN MN Easy-Clean for every-daycleaning of small stone surfaces. Enhances the appearanceof the stone and leaves a pleasant odour. Ready to use.Not layer forming.Item No. Qty Price/EA

LECLEAN500 500ml Spray 14.00LECLEAN1 1 Litre Refill 19.00

LITHOFIN MN Polish Cream For polishingof stone surfaces, provides gloss and protection. Maintainsall polished surfaces. Easy to polish. Contains solvents, CHC-free. For indoor use only.Item No. Qty Price/EA

LCREAM150W (White) 150ml 16.00LCREAM500W (White) 500ml 26.00LCREAM500B (Black) 500ml 35.00



FLEX Wet Feed Polishers Made in Germany. The original wet polisherfor the stone industry. Inline GFCI. 12 month warranty, service & parts available inSydney.Item No. Description Price/EA

LW123100WET 115mm, 3700RPM, 1150w , 2.4kg, 580.00(single speed)LEW123100WET 125mm, 1200-3700RPM, 1150w, 2.7kg 735.00(variable speed)LW1202S 130mm, 1750RPM, 1600w, 4.8kg 785.00(single speed)LW802VRS 130mm, 800-2400RPM, 1800w, 4.3kg 950.00(variable speed)

3 Head Planetary Polisher Suits 100mm Polishing Pads. Use with any powerful M14 polisher.Base features water feed, slurry skirt and vacuum takeoff. Ideal for polishing stair treads, benchtops and floors.Rapid levelling and professional finishing on concrete and stone. Drive unit not included.Item No. Description Price/EA

PLANETARY 3 x 100mm Pads, 12kg 900.00

FLEX Blind Hole Drill for Tactile Made in Germany. Blind hole drill with integral water feed.Suits 5 – 14mm Diamond drills. Ideal for tactile drilling. 700w Output 12 month warranty, service & parts availablein Sydney.Item No. Description Price/EA

M1412G M14 to 1/2” Gas Adapter (required) 35.00

12G10F 1/2” Gas to 10mm Female Adapter (required) 48.00

BHW1549VR 5-14mm 3500-10000RPM, 1200w, 3.3kg 855.00

GISON Air Polishers High quality Taiwanese machines. GISON hasmany years of experience and the widest range of stone specific wet feedmachines available.Item No. Description Price/EA

GPW-7 Side Exhaust, On/Off switch 240.00 100mm Pad, M14 thread 4500RPM, 321W, 1.2Kg 16cfm, ¼” air inlet, 84dBA

GPW-221 Side Exhaust, On/Off switch 330.00 100mm Pad, M14 thread 3200RPM, 321W, 1.2Kg 16cfm, ¼” air inlet, 84dBA

GPW-211 Front Exhaust, 140mm Pad, 320.00 5,000 RPM, M14 thread, 2.2kg 16cfm, ¼” air inlet, 97dBA

GISON Air Saws Unique machines for cutting stone.Water fed for no dust, and safe to use with no electrics!Item No. Description Price/EA

GPW-215C 125mm Guard, M14 thread 360.00 11000RPM, 455W, 2Kg 16.2cfm, ¼” air inlet, 92dBA

GPW-216C 180mm Guard, M14 thread 400.00 7000RPM, 694W, 3.2Kg 17.7cfm, 3/8” air inlet, 93dBA

FLEX Wet Saw & Track System Made in Germany. 170mmblade. Up to 60mm cutting depth. Inline GFCI. Mitre facility & optional tracksystem. 12 month warranty, service & parts available in Sydney.Item No. Description Price/EA

FLEXCS60 170mm Blade/1400watt 1200.00FLEXRAIL1600 1600mm Guide Rail 340.00FLEXRAILCONNECT Guide Rail Connector 130.00



GISON Air Fluting Machine For routing drainage grooves in sinks. Takes100mm fluting wheels, generally 6.35mm radius with 20mm bore. Essential for polishedgrooves.Item No. Description Price/EA

GPW-222Q 100mm, 2800RPM 500.00

GISON 90 Degree Edge Polishing Base For accurate polishing of 20 - 40mmthick stone. Accurate (Max 5mm) depth control. Suits most GISON sanders. 18 rolling wheels. Simpleoperation, perfect finishing, a great timesaver!Item No. Description Price/EA

GPW-A02A 90 Edge Base 350.00

GISON Bevelling Edge Polishing Base Bevelling Auxiliary Base will provide asecured polishing angle (between 15 to 45 degrees). Bevels 1-10mm.Item No. Description Price/EA

GPW-A01 Bevel Edge Base 350.00

SoRoTo Mixers Removable paddles for ease of cleaning, without using tools. Easily adjustabletelescopic legs for discharge into bucket or wheelbarrow. Protective - motor switch Start/stop. Theemergency stop may always be released without risks for operator, machine or material. After 3-5 minutesthe perfect mix is discharged through chute at bottom of drum. The charging hopper is mounted on hingesand equipped with automatic mechanical switch to meet safety regulations.Item No. Description Price/EA

SOROTO80 80l / 65kg 2400.00SOROTO100 100l / 75kg 3000.00SOROTO120 120l / 90kg 3500.00

MANTA Aluminium Site Saws The very bestquality from Italy. 3hp motor, 110mm cut depth. 350mm bladecapacity. Folding legs, submersible pump, alloy tray, mitringcapacity are just a few of the features of thiese premium saws.


MANTA100A 1m cut length 72Kg 3,400.00MANT120A 1.2m cut length, 79Kg 4,300.00



ICS Petrol Powered Diamond Chainsaws Packed with innovations and loaded with dependability. The distinctive blackpowerhead houses redesigned carburetion and ignition systems that work together to ensure easy starting, cooler operation, and dependableperformance at just about any elevation. Improved airflow design keeps the engine much cooler, extending its life.Item No. Description ICS part number Price

695GC-12 9.5kg, 5Hp, up to 35cm Bar 553464 2,500.00 (includes 12” bar & chain!)695GC-14 9.5kg, 5Hp, up to 35cm Bar 545236 3,600.00 (includes 14” bar & Concrete or Abrasive chain!)695F4-16 9.6kg up to 40cm Bar 547335 3,800.00 (includes 16” bar & Concrete or Abrasive chain!)695PG-14 9.6kg up to 40cm Bar 545235 3,400.00 (includes 16” bar & PowerGrit chain!)

ICS Hydraulic Powered Diamond Chainsaws The new 814PRO 13 cutting system offers the superior strength ofFORCE4™ technology in a package that meets industry standards of design and ergonomics. Built for the hardcore cutter, this sleek powerhouse ispacked with features designed to make it the hardest working saw ICS® has ever made.Item No. Description ICS Part number Price/EA

814F4 814 PRO Package 13” 571675 4500.00 (includes 13” bar & chain!)890F4 890F4 PRO Package 15” 566127 6,900.00 (includes 15” bar & chain)890PG 890PG PRO Package 15” 566123 6,500.00 (includes 15” bar & chain)890PG 890PG PRO Package 20” 566124 6,600.00 (includes 20” bar & chain) P95 PowerPack 550888 9500.00

Diamond Chains Genuine ICS

Description Material ICS part number Price

ProFORCE 10” Concrete 531743 850.00ProFORCE 15” Concrete 525342 1,000.00ProFORCE 20” Concrete 531749 1,200.00ProFORCE 10” Premium-L Concrete 531745 990.00ProFORCE 15” Premium-L Concrete 525343 1,150.00ProFORCE 20” Premium-L Concrete 531751 1,400.00PowerGrit 15” (PG) 537764 640.00PowerGrit 20” (PG) 537765 710.00ProFORCE 10” Abrasive 531747 900.00ProFORCE 15” Abrasive 525344 1,100.00ProFORCE 20” Abrasive 531753 1,300.00

Guidebars & Sprockets Genuine ICS

Model Description ICS part number Price

695GC 12” Guidebar 553207 210.00695GC 14” Guidebar 73600 260.00695F4 12” Force4 Guidebar 553208 201.00695F4 16” Force4 Guidebar 524490 330.00695F4 Drive Sprocket 525496 45.00680/695GC Drive Sprocket 70949 28.00880F4 Drive Sprocket 525495 255.00890F4 Drive Sprocket 565065 255.00



Abaco Site Saws The S1 features a 3HP motor and is guided by dual linear bearing on induction hardened chrome bars. The castaluminum working table gives accurate cutting of all types of natural and artificial stone. The S1 Saw is suitable for construction sites and workshops.Incorporated in the S1 Saw are wheels and rollers for effortless, single-handed manoeuvring. This Saw has an electric, submersible water pump.The S2 Site Saw has all the above features, but a much large table area, dual support tables for supporting larger slabs, and a massive 165cm cuttinglength.

Item No. Price/EA

SITESAWS1 350mm Blade 3900.00119cm cut lengthSingle Side TableSupport ArmsMitre facility13amp, 240v2800RPM212kg

ABACO One Stop A Frame Sturdy structure, designed to eliminate any risk of slabs tipping over. Slabs are placed on special rubberprofiles and secured with four ratchet securing bars. Contains an extra storage section in the center that is ideal for storing tools. Frame featurestwo eyelets which can be used to pick up the frame with an overhead crane. Built in brackets on all sides for forklift transport. Four 150mm heavy-duty removable casters included.Item No. Description L x W x H (inc wheels) Price/EA

OSA6135 One Stop A-Frame 900 1550 x 975 x 1285 1100.00OSA7247 One Stop A-Frame 1200 1810 x 1100 x 1585 1500.00OSA7263 One Stop A-Frame 1600 1810 x 1110 x 1985 1650.00OSA7275 One Stop A-Frame 1900 1810 x 1110 x 2260 1750.00OSA8756 One Stop A-Frame 1400 2190 x 1110 x 1805 1650.00OSA8763 One Stop A-Frame 2200 2190 x 1110 x 1985 1750.00

ABACO Slab Buggies This Slab Buggy isdesigned for maximum stability but compact enough tofit through any standard size door. Both the frame andbase are rubber, it comes with two self-locking castersand two pneumatic tires allowing for easy manouvering.Item No. Description Price/EA

8SB00 Single Side 363kg WLL 570.008DSB00 Double Side 330kg WLL 670.00

ABACO Slab Racks The Abaco Slab Rack is ideal for shops withlimited storage as it can handle many pieces of different sized materials. Therack consists of 2 steel base rails and 20 poles. This rack is available with poleswith or without rubber lining. The rack without rubber lined poles comes withrubber caps to protect stored material.Item No. Description Price/EA

RSR04R RHINO,10 poles, 1.2m, rubber lined 1150.00SRK010 Std, 20 poles,3m, no rubber 1700.00SRK10R Std, 20 poles,3m, rubber lined 1850.00

ABACO Working Tables Rubber linedsturdy working table. Built in brackets allow you to createdifferent work stations. Independent adjustable feet.Collapsible for easy transport. Constructed of 18 gauge50mm square tubing. Available with or without casters.Item No. Description Price/EA

AWT7523 Working table adjustable feet 620.00AWT7523C Working table with casters 750.00

Item No. Price/EASITESAWS2 350mm Blade 4900.00165cm cut lengthDouble Side TablesSupport ArmsMitre facility13amp, 240v2800RPM

ABACO Truck A-Frames The Economy Truck A-Frame is constructed of 50mm square tubing and a 80mm channel base with angledtimber blocks to protect material. Strengthening plates have been added at the base, increasing the Working Load Limit. The design of the twoEconomy A-Frames joined by a cross bar extend the overall width to five feet. The Truck A-Frame is constructed of two Standard A-Frames joined bya cross bar, extending the overall length to 1524mm. It comes with angled timber blocks to protect materials. Its design allows for moving materialfrom one site to another. The Heavy Duty Truck A-Frame incorporates two Standard A-Frames joined by four cross bars which extend the overalllength to 1524mm. It comes with angled timber blocks to protect material. The added strengthening plates added at the base increase the WorkingLoad Limit. This sturdy structure is designed for picking up and moving slabs from one site to another and for handling heavier slabs.Item No. Description Price/EA

TAF060 Standard 1 crossbar 1524 x 1524 x 1524mm 3636kg WLL 520.00TAF06H Heavy Duty 4 crossbar 1524 x 1524 x 1524mm 3000kg WLL 630.00



ABACO Dehydrators The Abaco Dehydrator is a dehydration system for the fast collection and trappingof the abrasive mud produced by machining and finishing marble, granite, and other stone. The Dehydrator is aneconomical, one step method in separating sludges and slurries from water. It is constructed of stainless steel andconsists of four basic components: electric pump, mud holding tank, clean water tray, and filter bags. The AbacoDehydrator has no moving parts and requires minimal maintenance.Item No. Description Price/EA

65100 Zinc Dehydrator 4900.0060100 Stainless Steel Dehydrator 7200.0060120 Replacement Bag 3.00

ABACO Lifters & Clamps For lifting stone,Original design, rugged construction. Available with white(add 5%) or black rubberItem No. Description Price/EA

ALG50 15-50mm Capacity 1200kg WL 720.00ALG60 15-50mm Capacity 1200kg WL 820.00ALG75 30-75mm Capacity 1200kg WL 890.00SCS500 10-105mm Capacity 750kg WL 470.00

ABACO Spreader Bar & Beam The Abaco Spreader Bar M1 is designedspecifically for the stone industry. This Spreader Bar is an invaluable piece of equipment ininstances where stone is required to be rolled over. The slings are suspended on crownedaluminum rollers which can be adjusted.The Abaco Spreader Beam M2 has a convenient and effective design where straps can easily behooked onto the bar at each designated slot for moving large slabs or a bundle of slabs easilyand safely. It is ideal for loading and unloading containers. The Beam comes with six preset beltspaces with labels of Working Load Limit clearly displayed on the beam making it safe and easyfor all users.


ASB106M1 Bar, 440 - 1440mm Length, 1500kg WLL 800.00

ASB106M2 Beam, 1448 - 2667mm Length, 3545 - 4545kg WWL 830.00

ABACO Self Locking Trollies The Abaco Self-locking trolllies are heavy duty,all terrain dollies. The rubber is vulcanized to the jaws to prevent chips and scratches offinished work pieces. They are designed with self-locking jaws for maneuvering stone slabsaround the shop, warehouse and job site. The self-locking jaws' clamping strength isproportional to the weight of the slab. Therefore, the heavier the slab, the greater theclamping strength. The M2 has two pneumatic tires and a caster. The M3 has two pneumatictires and a kickstand. The M4 has two solid rubber tires and a kickstand.Item No. Description Price/EA

SLT13M2 10-100mm Capacity 400kg WLL 460.00SLT13M3 10-100mm Capacity 400kg WLL 550.00

ABACO Elevating Hand Cart This one of a kind Hand Cart is designed for raising, loading, andunloading finished pieces with minimal labor. It is constructed of a vertical steel channel where pieces can be raised orlowered using a hand crank. The hand crank is located on the controlling unit away from the material being handledfor safety purposes. A rubber lined channel can accommodate pieces up to 70mm.Item No. Description Price/EA

EHC3541 1500 - 2400mm height range, 200kg WLL 840.00

ABACO Forklift Booms Designed for use on 2 and2.5 ton forklift trucks, this Forklift Boom offers versatility withmaximum visibility for the driver. When fully extended, the AbacoForklift Boom reaches up to 2400mm.Item No. Description Price/EA

40100 1.4-2.4m Reach 500-1500kg WL 1000.0041100 1.5-2.5m Reach 500-1200kg WL 1200.00



ABACO Carry Clamps The Abaco Carry Clamps are designed to safely lift and move slabswithout the use of a forklift. The durable, rubber padded handles reduce hand fatigue. Rubber lined jawsprotect the material and prevent the material from slipping. The weight of the slab exerts sufficient clampingforce for such simple clamping devices. These clamps help you work more efficiently on smaller jobs byeliminating the need for a forklift. The Single Handed Clamp, SCH25, allows two people to move a slab; whilethe Double Handed Clamp, ACC40, requires four people. Both models are sold in pairs.Item No. Description Price/EA

SCH25 25mm Cap. Single, 100kg WWL 230.00ACC40 40mm Cap. Double, 200kg WWL 280.00

ABACO 90° Clamp The Abaco 90° Clamp is specifically designed for positioning and securing miter joints. Youwill no longer have problems with miter joints failing while the glue is drying. It saves labor, is quick and easy to use, and isstrong and secure.Item No. Description Price/EA

A90C Pair of 90 degree clamps 220.00

ABACO Lamination Clamps Abaco Lamination Clamps are designedfor holding multiple slabs together while they are being glued. The simple design ofthe C-clamp allows it to glide with ease on the aluminum bar track and can betightened or loosened quickly. With a sturdy, rubber lined handle, the C-clamp is veryeasy to use and requires minimal labor. The Lamination Clamp is available in varioussizes to meet your needs.Item No. Description Price/EA

LC60 2 clamps, 60cm Bar 110.00




ABACO Seam Setter The Abaco Ratchet Seam Setter provides aquick and easy solution for accurate and safe positioning of countertops. The toolis lightweight and simple to use. A knob allows precision vertical adjustments.With the Seam Setter, your countertops will be perfectly joined and level. With alarge, 203mm footprint suction cups, our Seam Setter is strong enough for therequired tasks. M3 has white rubberItem No. Description Price/EA

ARS3 (M3) 480mm Range, 50kg WWL 440.00

ARS2 (M2) (Black Rubber) 380.00

ABACO Sink Lock The Abaco Sink Lock is a must have tool for thepositioning and gluing of sinks to countertops. It allows for perfect positioning, and youwill not have any difficulties adjusting the location of the sink. The Sink Lock securelysupports the sink while the glue is drying and has a quick release lock for easy removal.The Abaco Sink Lock is available in two convenient sizes.Item No. Description Price/EA

SLS24 700mm (24”) 95.00SLS48 1370mm (48”) 150.00

ABACO Tile Lifter The Abaco Tile Lifter is a must-have toolfor every Tiler. Easily lift tiles with these lifters, sold in pairs.Item No. Description Price/EAATL001 107mm x 50mm Tile Lifter - Black (pair) 23.00ATL001W 107mm x 50mm Tile Lifter - White (pair) 26.00

Stonemason’s Apron The Abaco Stonemason’s apronfeatures front pockets, 2 velcro strips down the front for attachingpolishing pads, and is made of heavy duty waterproof material, it’s also agood long length. Must for edge polishing or wet cutting. Snap clips foreasy fittingItem No. Description Price/EASMAPRON Stonemason’s Apron 22.00



TUSCAN SeamClip System The system interlocksthe tiles, virtually creating a single flat slab surface while thesetting material is curing. The interlocking design of the systemreduces and in most cases eliminates settling from shrinkage, aswell as minimizing the possibility of warping.Item No. Description Price/EA

TSCR0150 10-12mm Tile, 150pcs 55.00TSCR0500 10-12mm Tile, 500pcs 180.00TSCB0150 6.5-9.5mm Tile, 150pcs 50.00TSCB0500 6.5-9.5mm Tile, 500pcs 180.00TSCW0150 3-6mm Tile, 150pcs 55.00

TUSCAN Levelling System Very easy to learn and use atall skill levels. Installation is twice as fast and virtually eliminates lippage.Prevents tiles from moving while drying. Re-usable caps. More profitablefor the installer. Ideal for tiles 300mm or larger. Reduces installer fatigueand stress. Lippage free, level surface drastically reduces the need forgrinding.Item No. Description Price/EA

TUSCANSTRAP Levelling Strap Box 1000pcs 250.00TUSCANCAP Levelling Cap Box 250pcs 340.00TUSCANTOOL Setting Tool 230.00Discounts available! Free Setting Tool with every set of straps & caps soldfor a limited time only…

TERRA-LEVEL Pedestal System

TERRA LEVEL® pedestals can be used for all build-up heights and adjustmentsof incline. Build-up is reached through stacking the pedestals. The products fitinto each other with a 90° turn - therefore an optimal stability can beachieved. A huge advantage is the products flexibility of use. E.g. for layingsarranged in an offset pattern you can just remove one joint or cut thepedestals into half.

TERRA LEVEL® - block 3 cm was constructed to save time and costs. The blockcan be used from a minimum raising height of 5 cm and has to be completed(bottom and top) by TERRA LEVEL® 1 cm to guarantee anti-slipping conditions.

TERRA LEVEL® adjustment-disc 1 mm allows easy levelling. Different thicknessof slabs, differences of surface as well as fall of the terrace can be adjustedfrom 1 mm to 10 mm on every corner of the slab. Adjustment-disc can befixed in an improved way. In case of removing a joint (e.g. for arrangements inan offset pattern) locking the adjustment-disc within two pedestals is alsopossible.

Item No. Description Price/EATL1 1cm Pedestal 1.86TL2 3cm Pedestal 2.96TL3 1mm Shim (pkt 500) 46.60



Wedges & Shims For splitting stone. New designincorporates a rubber grommet to keep the set together, nomore lost shims! Also features an extra long wedge, for use insofter stones and easier striking.Item No. Description Price/EA

WS14X125 14mm Ø Hole x 125mm Wedge 12.00WS16X125 16mm Ø Hole x 125mm Wedge 12.00WS20X190 20mm Ø Hole x 190mm Wedge 16.00WS24X190 24mm Ø Hole x 190mm Wedge 18.00WS32X280 32mm Ø Hole x 280mm Wedge 32.00WS34X290 34mm Ø Hole x 290mm Wedge 38.00WS38X320 38mm Ø Hole x 320mm Wedge 40.00

Carbide Hand Chisel Carbide-tipped Chisels 12.5mm StockItem No. Stock/Blade Width Price/EA

CHC1255 12.5mm x 5mm 12.00CHC1258 12.5mm x 8mm 12.00CHC1259 12.5mm x 9mm 18.00CHC12512 12.5mm x 12mm 18.00CHC12515 12.5mm x 15mm 20.00CHC12520 12.5mm x 20mm 24.00CHC12525 12.5mm x 25mm 26.00CHC12530 12.5mm x 30mm 29.00CHC12535 12.5mm x 35mm 34.00CHC12540 12.5mm x 40mm 37.00

Carbide Pneumatic Chisel Carbide-tipped Chisels 12.5mm Stock,12.5mm Shank, suits most air tools.Item No. Stock/Blade Width Price/EA

CPC1255 12.5mm x 5mm 14.00CPC1258 12.5mm x 8mm 14.00CPC1259 12.5mm x 9mm 18.00CPC12512 12.5mm x 12mm 18.00CPC12515 12.5mm x 15mm 20.00CPC12520 12.5mm x 20mm 25.00CPC12525 12.5mm x 25mm 27.00CPC12530 12.5mm x 30mm 29.00CPC12535 12.5mm x 35mm 34.00CPC12540 12.5mm x 40mm 37.00

Item No. Price/EA Price/EA Price/EA Price/EA

6” 150mm 8” 200mm 10” 250mm 13” 325mm

DRIF0 20 30 40 50

DRIF1 20 30 40 50

DRIF2 20 30 40 50

DRIF3 20 30 40 50

DRIF4 20 30 40 50

DRIF5 20 30 40 50

DRIF6 20 30 40 50

DRIF7 20 30 40 50

DIAMACH Rifflers For fine carving soft stone

Carbide Point Tooth Pneumatic ChiselFeaturing Solid Carbide Tips, these point bushing tools are idealfor roughing out and texturing on all kinds of stone. 1/2” Shanksuits popular air tools. 20 x 20mm or 30 x 30mm square size.2,3,4 or 5 rows of tips. RR & RP Fittings available.Item No. Stock/Shank/# Tips Price/EA

20X20CBC4 12.5mm x 20 x 20mm x 4 36.0020X20CBC9 12.5mm x 20 x 20mm x 9 36.0020X20CBC16 12.5mm x 20 x 20mm x 16 48.0030X30CBC16 12.5mm x 30 x 30mm x 16 64.0030X30CBC25 12.5mm x 30 x 30mm x 25 68.00



Pneumatic Hammer Tool Available in several sizes. Suits10mm hoses. 1/2” Shank for use with all our pneumatic chisels.Item No. Piston Size/Tool Weight Price/EA

PHT10 10mm x 0.85kg 140.00PHT15 15mm x 1.2kg 160.00PHT20 20mm x 1.7kg 180.00

DIAMACH Nylon Mallet 5tonemason’s favourite.Various diameters. Australian Made Ash Handle. Now withpremium German round wedge.Item No. Size/Weight Price/EA

100NYLON 100mm (4”) 60.00125NYLON 125mm (5”) 1.2kg 80.00150NYLON 150mm (6”) 100.00HANDLE Replacement 250mm (10”) Handle 10.00WEDGE Replacement round wedge (German) 5.00

Bushhammer Plates. For bushhammer effect on stone andconcrete. Ideal for roughing surfaces. Replacement rollers availableItem No. Description Price/EA

125BUSHHAMMERM14 125mm 3 Rollers M14 300.00125BUSHROLLER Replacement Roller 50.00

DIATOP Hard Bond Double Row SegmentedSandstone Cup Wheel M14 Thread for 5” and 9” grinders.Premium Korean quality and extra hard bond for longer life in abrasivestone. Perfectly balanced. Ideal for bullnosing and levelling stone.Item No. Size/Weight Price/EA

DCR125 125mm (5”) 70.00DCR180 180mm (7”) 129.00

M14 Vacuum Brazed Diamond RoutersFor routing weep holes in stone, chasing mortar and joints inbrickwork and similar applications. Fits M14 grinder/polishers, solidshaft in 6mm or 8mm diameter, custom lengths and diametersavailable.Item No. Diam/Length Price/EA

M14X6X50 6mm x 50mm 40.00M14X6X130 6mm x 130mm 70.00M14X8X50 8mm x 50mm 40.00M14X8X130 8mm x 130mm 70.00



TROW & HOLDEN Pneumatic Carving Tools All Trow & Holden pneumatic tools are made to exacting specifications andare guaranteed against breakage for life. The “Type B” tools have a shorter piston stroke, are quieter and have less vibration. The “Type D” orDallett-style tools have a longer stroke, more impact and are more powerful.The size of the tool refers to the diameter of the piston. All 1/2”, 3/4”, and 1” pneumatic tools take 1/2” round shank chisels. The 1-1/4” tools take5/8” round shanks. The Bantam takes a chisel with a 5/16” shank.Item No. Description Price/EA

BANTAM “B” 15/32” Piston 5/16” Shank 3cfm 512.0012B “B” 1//2” Piston 1/2” Shank 4cfm 574.0034B “B” 3/4” Piston 1/2” Shank 4cfm 596.001B “B” 1” Piston 1/2” Shank 6cfm 616.00DALLETT12D “D” 1//2” Piston 1/2” Shank 3cfm 574.0034D “D” 3/4” Piston 1/2” Shank 4cfm 596.001D “D” 1” Piston 1/2” Shank 6cfm 616.00114D “D” 1-1/4” Piston 1/2” Shank 8cfm 648.00

TROW & HOLDEN Pneumatic Stone Carving Set OUR AIR-POWERED CARVING SET INCLUDES:1 x Trow & Holden “Type B” Short Stroke Carving Tool with 1/2” or 3/4” size piston1 x 10’ air hose with all connecting hardware installed1 x Tool pouch for easy storage3 x Solid carbide Trow & Holden Carving Chisels – 1/2” wide straight blade, 5/8” widerondel blade, 3/4” wide tooth chisel


THAIRCARSET Pneumatic Carving Set 858.00

TROW & HOLDEN Bantam Set THE BARRE BANTAMWeighs only 9 ounces — less than half the weight of our 1/2” B Tool.5/16” shank carbide chisels — smaller, lighter, and easier to control for fine carving.Smooth action with wide power range for incredible comfort & versatility.Like our other pneumatic tools, the Bantam is guaranteed against breakage for alifetime of trouble-free performance.The set includes: The Barre Bantam Pneumatic Tool, 10 ft. hose assembly with allhardware installed, and three chisels: 1/8” flat chisel, 3/16” rondel chisel, and 1/2”tooth chisel.Item No. Description Price/EA

THBANTAMSET Bantam Set 784.00

TROW & HOLDEN Carbide Carving Chisel5/8" Blade Is Shown. Made exclusively by Trow & Holden Company, ourCarving Chisels are the same size and shape as traditional machinechisels but feature an elongated carbide tip with three times morecarbide, so they will last longer and require less maintenance. Availablein straight or rondel styles up to 3/4" wide.Item No. Stock/Shank/Blade Width Price/EA

CC1212F18NS 1/2” x 1/2” x 1/8” 74.00CC1212F316NS 1/2” x 1/2” x 3/16” 76.00CC1212F14NS 1/2” x 1/2” x 1/4” 82.00CC1212F38NS 1/2” x 1/2” x 3/8” 84.00CC1212F12NS 1/2” x 1/2” x 1/2” 86.00CC581258NS 5/8” x 1/2” x 5/8” 90.00CC3412F34NS 3/4” x 1/2” x 3/4” 102.00Carving Chisels with Rondel Blade add $ 10

TROW & HOLDEN Machine ChiselsCarbide-tipped Machine Chisels are used for general carving, sculptingand lettering in both soft and hard stone. Both Finishing {F} Blade Stylesand Roughing {R} Blade Styles (with heavier carbide tips) can be providedwith optional teeth or rondel blade.Item No. Stock/Shank/Blade Width Price/EA

CC1212F18 1/2” x 1/2” x 1/8” 76.00CC1212F316 1/2” x 1/2” x 3/16” 80.00CC1212F14 1/2” x 1/2” x 1/4” 86.00CC1212F38 1/2” x 1/2” x 3/8” 88.00CC1212F12 1/2’ x 1/2” x 1/2” 90.00CC5812F58 5/8” x 1/2” x 5/8” 94.00CC5858F58 5/8” x 5/8” x 5/8” 94.00CC3412F34 3/4” x 1/2’ x 3/4” 112.00CC3458F34 3/4” x 5/8” x 3/4” 108.00CC1212R12 1/2” x 1/2” x 1/2” 94.00CC5812R58 5/8” x 1/2” x 5/8” 100.00CC5858R58 5/8” x 5/8” x 5/8” 100.00CC3412R34 3/4” x 1/2” x 3/4” 112.00Chisels with Rondel Blade, add $ 10. Chisels with Teeth, add $ 20



TROW & HOLDEN Carbide Machine PointCarbide-tipped Machine Points for knocking off high spots in stoneItem No. Stock/Shank Price/EA

CMP12 1/2” X 1/2” 108.00CMP58 5/8” X 1/2” 116.00CMP34 3/4” X 1/2” 126.00

TROW & HOLDEN Swept Cape Chisel withTeeth Used like the standard Swept Cape chisel, the Swept CapeChisel with Teeth features a thinner 1/8” blade with sharp cutting teethand blade. Especially effective with very thin and hard mortar joints.Item No. Stock/Shank/Blade Width Price/EA

AD121218S 1/2” x 1/2” x 1/8” 74.00

TROW & HOLDEN Carbide Soft Stone ChiselCarbide-tipped Chisels 1/2" Stock with 1/2" ShankItem No. Stock/Shank/Blade Width Price/EA

CMC#34-12 1/2” x 1/2” x 3/4” 88.00CMC#1-12 1/2” x 1/2” x 1” 92.00CMC#114-12 1/2” x 1/2” x 1-1/4” 96.00CMC#112-12 1/2” x 1/2” x 1-1/2” 110.00CMC#2-12 1/2” x 1/2” x 2” 122.00CMC#212-12 1/2” x 1/2” x 2-1/2” 134.00CMC#3-12 1/2” x 1/2” x 3” 142.00Chisels with Rondel Blade, add $ 10. Chisels with Teeth, add $ 20

TROW & HOLDEN Carbide Limestone ChiselFeaturing more finely tapered carbide blades with traditional flaredstyling, these limestone chisels can be provided with flat, rondel, tooth ornibbler (combination tooth and rondel) blades.

Item No. Stock/Shank/Blade Width Price/EA

CL5812F34 5/8” x 1/2” x 3/4” 126.00CL5812F1 5/8” x 1/2” x 1” 130.00CL5812F114 5/8” x 1/2” x 1-1/4” 134.00CL5812F112 5/8” x 1/2” x 1-1/2” 144.00Chisels with Rondel Blade, add $ 10. Chisels with Teeth, add $ 20

TROW & HOLDEN Carbide Cleaning UpChiselItem No. Stock/Shank/Blade Width Price/EA

CF1212F1 1/2” x 1/2” x 1” 94.00CF5812F1 5/8” x 1/2” x 1” 98.00CF5812F114 5/8” x 1/2” x 1-1/4” 108.00CF5812F112 5/8” x 1/2” x 1-1/2” 116.00CF5812F2 5/8” x 1/2” x 2” 136.00CF5812R1 5/8” x 1/2” x 1” 110.00CF5812R114 5/8” x 1/2” x 1-1/4” 122.00CF5858R114 5/8” x 5/8” x 1-1/4” 122.00Chisels with Rondel Blade, add $ 10. Chisels with Teeth, add $ 20

BARRE BANTAM Carbide Chisels All chisels with5/16" shank are designed to fit the Barre Bantam Pneumatic Tool only,but can fit any pneumatic tool with a 1/2" shank opening when usedwith a pneumatic tool shank adaptor.Item No. Shank/Blade Width Price/EA

CC18 5/16” x 1/8” 78.00CC316 5/16” x 3/16” 78.00CC38 5/16” x 3/8” 94.00CC12 5/16” x 1/2” 102.00Chisels with Rondel Blade, add $ 10. Chisels with Teeth, add $ 20

TROW & HOLDEN Carbide Bushing Chisels AllChisels with 5/16" shanks are designed to fit the Barre Bantam Pneumatic Toolonly but can fit any pneumatic tool with a 1/2" shank opening when used witha Pneumatic Tool Shank Adapter.Item No. Description Price/EA

A - CBJ-4 3/8” square 4-PT Bush 92.00B - CJ12516-4 1/2” square Heavy 4-PT Bush 98.00C - CJ12516-9 1/2” square Heavy 9-PT Bush 110.00D - CCC78516 7/8” round Cup Chisel 106.00E - CBJ-3 3-Blade Bush 96.00F - CBM-4 4-Tooth Frosting 84.00G - CBM-12 12-Tooth Frosting 88.00H - CBM-21 21-Tooth Frosting 88.00



TROW & HOLDEN Carbide 4-PointTooth Chisel Featuring Solid Carbide Tips, these 4-pointbushing tools are ideal for roughing out and texturing on all kindsof stone. The “L” types are 9” (230mm) long.Item No. Stock/Shank Price/EA

CJ3812-4 3/8” x 1/2” 90.00CJ1212-4 1/2” x 1/2” 100.00CJ5812-4 5/8” x 1/2” 118.00CJ5858-4 5/8” x 5/8” 118.00CJ3412-4 3/4” x 1/2” 138.00CJ3458-4 3/4” x 5/8” 138.00CI1212-4-L 1/2” x 1/2” 110.00CI5812-4-L 5/8” x 1/2” 126.00CI3412-4-L 3/4” x 1/2” 142.00

TROW & HOLDEN Carbide Marble Frosting ToolUse the Frosting Tool to leave a fine texture in marble or softer stone.Item No. Stock/Shank/Teeth per row Price/EA

CM25 1/2” x 1/2” x 5 84.00CM49 5/8” x 1/2” x 7 96.00CM64 3/4” x 1/2” x 8 108.00

TROW & HOLDEN Carbide Cup Chisel A bushing toolthat will follow the contour of the stone and close the surface without digging in,the Cup Chisel leaves a unique finish.Item No. Stock/Shank Price/EA

CC7812 7/8” x 1/2” 106.00CC7858 7/8” x 5/8” 106.00

TROW & HOLDEN Carbide 9-PointTooth Chisel Featuring Solid Carbide Tips, these 9-pointbushing tools are ideal for roughing out and texturing on all kindsof stone.Item No. Stock/Shank Price/EA

CJ1212-9 1/2” x 1/2” 108.00CJ5812-9 5/8” x 1/2” 128.00CJ5858-9 5/8” x 5/8” 128.00CJ3412-9 3/4” x 1/2” 150.00CJ3458-9 3/4” x 5/8” 150.00CI1212-9-L 1/2” x 1/2” 116.00CI5812-9-L 5/8” x 1/2” 136.00CI3412-9-L 3/4” x 1/2” 156.00

mm 3 4 6 10 12 16 19 22 25 38 50 63 75 100

inches 1/8 3/16 1/4 3/8 1/2 5/8 3/4 7/8 1-1/4 1-1/2 2 2-1/2 3 4

TROW & HOLDEN Carbide Double Blade ChiselUse the Double Blade Chisel after the 4-Point or 9-Point for further smoothing.Item No. Stock/Shank/Blade Width Price/EA

CH58121 5/8” x 1/2” x 1” 122.00CH5812112 5/8” x 1/2” x 1-1/2” 134.00

TROW & HOLDEN Carbide 3 Blade Bushing ChiselUse a Three Blade to create an axed or brushed finish.Item No. Stock/Shank Price/EA

CJ1212-3CC 1/2” x 1/2” 128.00CJ5812-3CC 5/8” x 1/2” 138.00

TROW & HOLDEN Carbide Criss-CrossChisel The Criss-Cross leaves a unique cross-hatched finishand nicely follows the 9-Point or Three Blade.Item No. Stock/Shank Price/EA

CJ1212-4CC 1/2” x 1/2” 142.00CJ5812-4CC 5/8” x 1/2” 152.00CJ3412-4CC 3/4” x 1/2” 170.00

TROW & HOLDEN Carbide Cape ChiselItem No. Stock/Shank/Blade Width Price/EA

CD121218 1/2” x 1/2” x 1/8” 78.00CD1212316 1/2” x 1/2” x 3/16” 84.00CD121214 1/2” x 1/2” x 1/4” 88.00CD121238 1/2” x 1/2” x 3/8” 96.00

TROW & HOLDEN Carbide RipperItem No. Stock/Shank/No. Of Teeth Price/EA

CG1212-2 1/2” x 1/2” x 2 102.00CG1212-3 1/2” x 1/2” x 3 118.00CG5812-4 5/8” x 1/2” x 4 142.00CG5858-4 5/8” x 5/8” x 4 142.00

Conversion Table inch/mm



TROW & HOLDEN Steel Swept Cape ChiselThese tools are used almost exclusively by masons to remove old mortarin preparation for repointing. Their curved shape prevents the chiselfrom getting stuck in mortar joints. All Stock is 1/2" Square and allshanks are 1/2" Round. STEEL BLADE ONLY.Item No. Blade Width Price/EA

AD1212316S 3/16” 68.00AD121214S 1/4” 76.00AD121238S 3/8” 82.00AD12128S 1/8” (with teeth) 100.00

TROW & HOLDEN Detachable Striking CapFitted over the 1/2” shank of pneumatic chisels, this striking cap protectsthe end of the chisel when using conventional hammers.Item No. Price/EA

STRIKINGCAP 34.00

TROW & HOLDEN Soft Stone Mallet HeadChisel For soft stone. All styles available with flat or rondel blades.Toothed blades are recommended for the 5/8" stock only.Item No. Stock/Blade Width Price/EA

CMC34 1/2” x 3/4” 92.00CMC1 1/2” x 1” 94.00CMC114 1/2” x 1-1/4” 98.00CMC112 1/2” x 1-1/2” 110.00CMC2 1/2” x 2” 118.00CMC212 1/2” x 2-1/2” 142.00CMC3 1/2” x 3” 162.00CF58121H 5/8” x 1” 106.00CF5812114H 5/8” x 1-1/4” 112.00CF5812112H 5/8” x 1-1/2” 128.00CF58122H 5/8” x 2” 134.00Chisels with Rondel Blade, add $ 10. Chisels with Teeth, add $ 20

TROW & HOLDEN Comfort Grip Hand SetFeaturing our exclusive contoured handle, Comfort grip Hand Set provides asecure grip for more powerful blows. Stock size = 1-1/8" and Blade width =2".Item No. Stock/Blade Width Price/EA

CHS1182CG 1-1/8” x 2” 236.00

TROW & HOLDEN Carbide HandCarving/Lettering Set Introducing our new Hand Carving &Lettering Chisels. We have shortened the length to 7", allowing greatercontrol while working close-up. The blades feature fine tapers with durablecarbide tips and the hexagonal stock feels comfortable during extended use.Blade widths range from 1/8" through 1/2". Chisels are sold individually(please choose size below). Chisels are also available as a complete set of sixchisels with canvas pouch and your choice of Round or Square HammerItem No. Stock/Blade Width Price/EA

CARBIDELETTERINGSET 6 Chisels, Box & Hammer 604.00CHC38-18X 3/8” x 1/8” 86.00CHC38-316X 3/8” x 3/16” 92.00CHC38-38X 3/8” x 3/8” 98.00CHC12-14X 1/2” x 1/4” 90.00CHC12-38X 1/2” x 3/8” 96.00CHC12-12X 1/2” x 1/2” 106.00

TROW & HOLDEN Carbide Hand Point For roughing out and knocking off high spots.Item No. Stock Price/EA

CHP38 3/8” 82.00CHP12 1/2” 108.00CHP58 5/8” 112.00CHP34 3/4” 122.00CHP78 7/8” 132.00CHP1 1” 140.00

mm 3 4 6 10 12 16 19 22 25 38 50 63 75 100

inches 1/8 3/16 1/4 3/8 1/2 5/8 3/4 7/8 1-1/4 1-1/2 2 2-1/2 3 4

Conversion Table inch/mm



TROW & HOLDEN Carbide Hand Chisel Usethe Hand Chisel for general carving, shaping and roughing out.Item No. Stock Price/EA

CHC38 3/8” 80.00CHC12 1/2” 94.00CHC58 5/8” 98.00CHC34 3/4” 108.00CHC78 7/8” 128.00CHC1 1” 132.00

TROW & HOLDEN Carbide Hand Set Use the HandSet for trimming stone to size when the surface is relatively flat. This chiselfeatures two usable blades for rockfacing, squaring and pitching stoneItem No. Stock/Blade Width Price/EA

CHS1118 1” x 1-1/8” 115.00CHS1112 1” x 1-1/2” 143.00CHS12 1” x 2” 170.00CHS1182 1-1/8” x 2” 184.00CHS118214 1-1/8” x 2-1/4” 192.00CHS118212 1-1/8” x 2-1/2” 196.00CHS1183 1-1/8” x 3” 203.00CHS1184 1-1/8” x 4” 257.00

TROW & HOLDEN Offset Carbide Hand Set Usethe Offset Hand Set when the chipper style is desired but more strength isneeded. This tool makes it easier to see your pitch line and also helps toavoid nicking as you trim your stone.Item No. Stock/Blade Width Price/EA

CHO34114 3/4” x 1-1/4” 168.00CHO1118 1” x 1-1/8” 142.00CHO1112 1” x 1-1/2” 176.00CHO12 1” x 2” 204.00CHO1182 1-1/8” x 2” 224.00CHO118212 1-1/8” x 2-1/2” 244.00CHO1183 1-1/8” x 3” 266.00CHO1184 1-1/8” x 4” 316.00

TROW & HOLDEN Carbide Mason’s ChipperThe Mason's Chipper offers a bevelled blade for rock facing, trimming orsquaring stone.Item No. Stock/Blade Width Price/EA

CHOM34114 3/4” x 1-1/4” 172.00CHOM1118 1” x 1-1/8” 152.00CHOM1112 1” x 1-1/2” 186.00CHOM12 1” x 2” 214.00CHOM1182 1-1/8” x 2” 234.00CHOM118212 1-1/8” x 2-1/2” 254.00CHOM1183 1-1/8” x 3” 276.00CHOM1184 1-1/8” x 4” 326.00

TROW & HOLDEN Carbide Heavy HandPoint New--heavier contour-grip handle takes a harder blow.Item No. Stock Price/EA

CHP114CG 1-1/4” 148.00

TROW & HOLDEN Carbide Comfort GripRound Hand Point New--heavier contour-grip handletakes a harder blow.Item No. Stock Price/EA

CHP138CG 1-3/8” 140.00

TROW & HOLDEN Carbide Comfort GripHand Chisel New-- Features 1-1/4" Square contoured handle andheavier carbide tip for the toughest jobs on hard stone.Item No. Stock/Blade Width Price/EA

CHC114CG 1-1/4” x 1-1/4” 172.00

TROW & HOLDEN Carbide Comfort GripHand Tracer Featuring our exclusive contoured handle, theComfort Grip Hand Tracer provides a secure grip for more powerfulblows. The heavier carbide tip will last and last, even when cutting thehardest stone.Item No. Stock/Blade Width Price/EACHT1182HD 1-1/8” x 2” 184.00

TROW & HOLDEN Carbide HandTracer The Hand Tracer is used to split stone or to score a line aline before trimming.Item No. Stock/Blade Width Price/EA

CHT1112 1” x 1-1/2” 174.00CHT12 1” x 2” 188.00CHT1182 1-1/8” x 2” 202.00CHT118212 1-1/8” x 2-1/2” 226.00CHT1183 1-1/8” x 3” 250.00CHT1184 1-1/8” x 4” 316.00



TROW & HOLDEN Brass Hammer Brass Hammers areperfect for lettering or other light work. Softer metal helps prevent bruising of thestone and reduces chisel shank wear. The round head means the hammer makescontact wherever it strikes the chisel, reducing the chance of mis-strikes. Includes5” hardwood handle.Item No. Weight Price/EA

HBR1 1lb 72.00HBR112 1-1/2lb 80.00HBR2 2lb 86.00

TROW & HOLDEN Carbide Mill PickTraditionally used for dressing mill stones, the Carbide Mill Pick isalso handy for chiseling lines in stone or trimming edges. Includeswood handle.Item No. Weight Price/EA

HMP2 2lb 272.00

TROW & HOLDEN Carbide Mosaic Hammer & HardieTraditionally used for cutting tile for detailed mosaic work, the Carbide Mosaic Hammer’s fine carbideblades also work well for trimming and shaping thin veneer stone. Available in 1 lb. and 2-1/2 lb.weights, both hammers are fitted with wood handles (1 lb has 10” handle; 2-1/2 lb. has 16” handle). Ifyou are doing mosaic work, the steel Hardie is a must. The pointed end is designed to be driven into ablock of wood and the hardened chisel edge allows for precise placement and cutting of glass, tile orother mosaic materials.Item No. Weight/Handle Included Price/EA

HMO1CT 1lb x 10” wood 228.00HMO212CT 2-1/2lb x 16” wood 292.00HARDIE 18oz 88.00

TROW & HOLDEN Solid Tooth Bush HammerFor shaping, texturing or smoothing soft stone. To shape or remove stone, usemore impact. Lighter impact will smooth the stone, leaving a stippled finish.IItem No. Stock/Length/Weight/Handle Price/EAHBH1SQ 1” x 5” x 1-1/2 lbs x 10” wood 108.00HBH112SQ 1-1/2” x 6” x 3-1/2 lbs x 16” wood 230.00HBH134SQ 1-3/4” x 6-1/2” x 5-1/2 lbs x 16” wood 250.00HBH2SQ 2” x 7” x 7-1/2 lbs x 16” wood 310.00HBH1SQCT (carbide tipped) 1” x 5” x 1-1/2 lbs x 10” wood 330.00

TROW & HOLDEN Carbide Bull Set For roughing out or shaping large blocks of flat stone (sawed or polished surface). Usingthe Bull Set is a 2-person operation - one person holds the hammer angled on its edge, set in place along the edge of the area of stone to beremoved, angling the blade slightly toward the outside of the stone. The other person then hits it with the striking hammer. With use, the breakingedge of the hammer will wear down; the hammer can then be turned around on it's handle and the other side used. NOTE: This hammer is notmeant to be swung.Carbide lasts longer and requires less maintenance than steel; however, it is more vulnerable to breaking if placed on an uneven surface, so be sureto use the Carbide Bull Set on a sawed or polished block.Item No. Weight/Handle Option Price/EA

HBS8 8 lbs x 32” wood 372.00HBS10 10 lbs x 32” wood 446.00HBS12 12 lbs x 32” wood 502.00CARBIDE TIPHBS8CT 8 lbs x 32” wood 530.00HBS10CT 10 lbs x 32” wood 610.00HBS12CT 12 lbs x 32” wood 660.00

TROW & HOLDEN Slab Splitter Use the same way as a Bull Set, but use it to split down the middle of a stone rather than alongthe edge. Carbide-Tipped Slab Splitters also available for use on Saw Blocks or Polished Surfaces Only.Item No. Weight/Handle Option Price/EA

HSS8 8 lbs x 32” wood or fiberglass 372.00HSS10 10 lbs x 32” wood or fiberglass 446.00HSS12 12 lbs x 32” wood or fiberglass 502.00CARBIDE TIPHSS10CT 10 lbs x 32” wood or fiberglass 610.00HSS12CT 12 lbs x 32” wood or fiberglass 660.00



TROW & HOLDEN Carbide Trimming Hammers Two of most popular hammers are now available with carbide on alledges, so you can use them longer with less regrinding. When the edges eventually dull, turn it over on the handle for 2 more fresh edges. It worksequally well for right or left hand use.tem No. Weight Price/EAHTH2BCTV Vert. Carbide Blade & Conc Back Edge 2 lbs 290.00HTH2BCTH Horiz. Carbide Blade & Conc Back Edge 2 lbs 290.00HTH212CTV Two Vert. Concave Faces 2-1/2 lbs 396.00HTH212CTH Two Horiz. Concave Faces 2-1/2 lbs 396.00HTH312CTV Two Vert. Concave Faces 3-½ lbs 406.00HTH312CTH Two Horiz. Concave Faces 3-½ lbs 406.00

TROW & HOLDEN Carbide Stone Buster Price Includes 16" wood handle, installed. Our new carbide-tipped stone busterhammers can be used three different ways to handle a wide variety of stone cutting jobs.Swing the Stone Buster, using the well-balanced and heat-treated striking head to hit your hand tools and chisels.Swing the Stone Buster, using the rugged carbide-tipped blade, to trim, shape or split the hardest stone.Hold the Stone Buster on the stone, using the heavy wood handle, and strike it with another hammer to deliver a powerful splitting force exactlywhere you want it. The handle also helps keep your hand out of harms way.Available with vertical or horizontal carbide-tipped blades in 2 LB and 4 LB weights.Item No. Weight/Blade Direction Price/EA

HSB2CTV 2lb x Vertical Blade 248.00HSB2CTH 2lb x Horizontal Blade 248.00HSB4CTV 4lb x Vertical Blade 270.00HSB4CTH 4lb x Horizontal Blade 270.00

TROW & HOLDEN Carbide Hammer Set Price Includes 16" wood handle, installed. Our new carbide-tipped hammer setallows you to deliver a powerful yet accurate blow to make your edge work and pitching jobs go even faster. Just position the blade, then strike theheat-treated head with another hammer. Like our Stone Buster, the hammer head is also perfect for striking other hand tools. Available withvertical or horizontal carbide-tipped blades.Item No. Weight/Blade Direction Price/EA

HHS4CTV 4lb x Vertical Blade 270.00HHS4CTH 4lb x Horizontal Blade 270.00

TROW & HOLDEN Carbide Double Blade Mason’s Hammer The Double Blade Mason's Hammer features thesame heavy duty carbide-tipped blade as our Stone Buster, but gives you both a vertical and horizontal blade in one hammer. Whatever the job, thisversatile new hammer has the right blade. Price includes 16" wood handle. 13" Fiberglass Handle available at at additional cost.Item No. Weight/Handle Option Price/EA

HDB3CT 2lb x 16” wood 292.00

lb 0.5 1 1.5 2 3 4 5 6 8 10 12

kg 0.22 0.45 0.68 0.91 1.36 1.81 2.27 2.72 3.62 4.54 5.44

TROW & HOLDEN Stonemason’s or Mash HammerMade for striking stone only, should not be used to hit another hammer, nor be hit by another hammer. One end is a splitting blade for breakingstone, the other end is for trimming and can be provided with either a flat or concave face.Item No. Weight/Handle Price/EA

HMH2 2 lbs x 16” wood 164.00HMH2CT Carbide Tip 2 lbs x 16” wood 240.00HMH3 3 lbs x 16” wood 186.00HMH3CT Carbide Tip 3 lbs x 16” wood 264.00HMH4 4 lbs x 16” wood 196.00HMH4CT Carbide Tip 4 lbs x 16” wood 296.00HMH6-Special (2” square) 6 lbs x 32” wood 250.00HMH8 8 lbs x 32” wood 308.00HMH10 10 lbs x 32” wood 330.00HMH12 12 lbs x 32” wood 396.00HMH14 14 lbs x 32” wood 440.00HMH16 16 lbs x 32” wood 496.00HMH18 18 lbs x 32” wood 5650.00

TROW & HOLDEN Ultimate Mash Hammer Providing the best wear resistance of any stonecutting hammer on themarket, our new carbide-tipped Ultimate Mash Hammer features heavy-duty carbide tips on the blade and both edges of the back cutting head. Nowyou can split and trim the hardest stone without the frequent regrinding and re-tempering necessary with steel blade hammers.Item No. Weight/Handle Option Price/EA

HMH3CTBE 3lb x 16” wood or fibreglass 376.00HMH3CTBEH 3lb (Horiz.)x 16” wood or fibreglass 376.00HMH4CTBE 4lb x 16” wood or fibreglass 396.00



TROW & HOLDEN Carbide Hammer Point Price includes 13" fiberglass handle, installed.The new carbide-tipped Hammer Point is the fast, easy way to rough out a block. It's also perfect for removing adifficult knot or high spot. You can swing the Hammer Point like a regular hammer or use the sturdy fiberglass handleto hold in position while you strike it with another hammer. Keeping your hand away from the action allows you todeliver a powerful blow without fear of a mis-strike. This could be the most valuable tool in your toolbox. Nowavailable in 4 LB and 2 LB weights.Item No. Weight Price/EA

HHP2CT 2lb 210.00HHP4CT 4lb 250.00

TROW & HOLDEN Carbide Bush Hammer For use with harderstones, the carbide-tipped bush hammer has 16 teeth on one end and 36 teeth on the other. Size is 1" Sq.x 5" Long and it weighs 1-1/2 LB. A 10" Wooden Handle is included.Item No. Stock/Length/Weight/Handle Price/EA

HBH1SQCT 1” x 5” x 1-1/2lb x 10” wood 330.00

TROW & HOLDEN Rock Pick For years we have been installing carbide tips onto our customer's brick mason hammers. Weare now proud to offer two sizes of VAUGHN hammers with carbide-tipped blades. In addition, a carbide flat head (for trimming edges) or acarbide bushing head (for leveling or texturing) are available in both sizes. Wood handle included.Item No. Weight/Blade Width Price/EA

HRP16B Carbide Blade Only 1 lb x 1” 204.00HRP16BH Carbide Blade & 9-Pt Bushing Head 1 lb x 1” 288.00HRP16BTH Carbide Blade & Trimming Head 1 lb x 1” 240.00HRP24B Carbide Blade Only 1-1/2 lbs x 1-1/4” 216.00HRP24BH Carbide Blade & 16-Pt Bushing Head 1-1/2 lbs x 1-1/4” 300.00HRP24BTH Carbide Blade & Trimming Head 1-1/2 lbs x 1-1/4” 258.00

TROW & HOLDEN Stinger Our newest small hammer has carbide on both ends making it suitable for shaping on any type ofstone. It features a point on one end and a chisel blade on the other for quick and easy pointing, chiseling and splitting. It weighs 2 pounds andis available with either a vertical or horizontal chisel end.Item No. Weight/Blade Direction/Handle Option Price/EA

STINGER2V 2lb x Vertical Blade x 16” wood or 13” fibreglass 228.00STINGER2H 2lb x Horizontal Blade x 16” wood or 13” fibreglass 228.00STINGER4V 4lb x Vertical Blade x 16” wood or 13” fibreglass 320.00STINGER4H 4lb x Horizontal Blade x 16” wood or 13” fibreglass 320.00

TROW & HOLDEN Comfort Grip Collection Customers have been so happy with theperformance of our Comfort Grip hand tools that we have decided to offer a complete set, along with oursignature oval-eye 3 lb. Hand Hammer, all in a sturdy canvas tool bag. Our Comfort Grip carbide hand toolsfeature contoured handles which provide a secure grip for more powerful blows. Heavier carbide tips last andlast, even when cutting the hardest stone .All our tools are manufactured from the highest quality American-made steel and carbide. Included are:3 lb. Hand Hammer with oval eye and larger striking faceHeavy Hand Point with Comfort Grip handleComfort Grip Hand Chisel with 1-1/4” heavy duty bladeComfort Grip Hand Set with 2” bladeComfort Grip Hand Tracer with 2” heavy duty bladeHeavy duty Trow & Holden canvas tool bagItem No. Price/EA

COMFORTGRIPCOLLECTION 918.00

TROW & HOLDEN Carbide Masonry Set Our NewCarbide Masonry Set, includes three of our most versatile stoneworkingtools. The carbide-tipped Stone Buster, our newest hammer, gives you asplitting tool and a striking hammer in one tool. It is available in either 2 LBor 4 LB weights. Comes with a 16" wood handle or substitute a fibreglasshandle for an additional $12. The 2" carbide-tipped blade Mason's Chipperis perfect for light trimming or a squaring stone. The steeply angled bladeand bevelled carbide tip make it easier to see your work. The 1" stockcarbide-tipped Hand Point will be the workhorse of your tool set. Use it torough out and remove high spots, which will help extend the life of yourwider-blade carbide tools.Item No. Price/EA

CARBIDEMASONRYSET 536.00lb 0.5 1 1.5 2 3 4 5 6 8 10 12

kg 0.22 0.45 0.68 0.91 1.36 1.81 2.27 2.72 3.62 4.54 5.44



TROW & HOLDEN Pneumatic Mortar Removal Set Ourpneumatic mortar removal set is powerful enough to cut through the hardest mortars yetcan be throttled down for fine detail work. The set features: 1" "Type B" short strokecarving tool; 10' air hose assembly with STAUBLI push-button Quick Connect; Striking capand joint clean-out nozzle; Tool pouch for easy storage; Mortar removal chisels (4)--1/8"and 1/4" carbide cape chisels, 4 tooth carbide ripper, 1/4" steel swept cape chisel. Use witha 5HP compressor to shave countless hours from your task..Item No. Price/EA

MORTARREMOVALSET 1066.00

TROW & HOLDEN Carbide Bushing Set Anyone with a pneumatic carvingtool will simply love these bushing chisels and the set makes a great addition to our PneumaticCarving Set. Bushing Set, Includes: 5/8" sq. 4-point with 1/2" shank; 5/8" sq. 9-point with 1/2"shank. 7/8" rd. Cup Chisel with 1/2" shank. 1 Wooden Box (holds 4 chisels) Bushing Set alsoavailable with 5/16" shank for Bantam Tools.Item No. Price/EA

BUSHINGSETB (Bantam) 316.00BUSHINGSET 338.00

TROW & HOLDEN Hard Stone Carving Set This setfeatures carbide-tipped chisels, which will keep their edge and last many times longerthan steel tools. Use them for hand carving in granite, hard marble or anytime you'relooking for improved performance in your stone carving tools. SET INCLUDES: 1/2" CTPoint, 3/8" CT Chisel, 1/2" CT Chisel w/teeth, 3/4" and 1-1/4" CT Mallet HeadChisels,Tool Pouch and Your Choice of Hand Hammer--1-1/2 lb. Square hammer (10"handle) or 1-1/2 lb. Round Hammer (6" handle).Item No. Price/EA

HARDSTONECARVESET 482.00

AL-ORR Soft Stone Lettering ChiselMallet Head These tools are the ‘Al-Orr’ brand formarble lettering, made using a 3/8” (10mm) shank. The tungstencarbide tip sizes range from 1/8” (3mm) to 1” (25mm). The toolsare for use on marble, slate, sand stone and other soft stone.Item No. Blade Width Price/EA

A03MLH 1/8” 51.00A05MLH 3/16” 51.00A06MLH 1/4” 52.00A08MLH 5/16” 52.00A10MLH 3/8” 54.00A11MLHS 7/16” 59.00A12MLHS 1/2” 61.00A16MLHS 5/8” 73.00A20MLHS 3/4” 82.00A22MLHS 7/8” 97.00A25MLHS 1” 101.00

AL-ORR Soft Stone Masonry Chisel These tools are the ‘Al-Orr’ brand for marble carving, made using a 3/8” (10mm) shank. The tungstencarbide tip sizes range from 1/8” (3mm) to 4” (100mm). The tools are for use onmarble, slate, sand stone and other soft stone.Item No. Blade Width Price/EA Price/EA Price/EA

Pneumatic Mallet Hammer

A03MM(P/M/H) 1/8” 66.00 71.00 60.00A05MM 3/16” 66.00 71.00 60.00A06MM 1/4” 66.00 72.00 61.00A08MM 5/16” 66.00 72.00 62.00A10MM 3/8” 66.00 72.00 62.00A12MM 1/2” 67.00 74.00 64.00A16MM 5/8” 71.00 75.00 67.00A20MM 3/4” 83.00 85.00 74.00A25MM 1” 96.00 99.00 95.00A38MM 1-1/2” 116.00 119.00A50MM 2” 141.00 148.00A75MM 3” 227.00 233.00A100MM 4” 367.00 375.00



AL-ORR General Masonry Tools This is a selection of ‘Al-Orr’ and ‘KeNe’ brand general masonry tools.

Item No. Description Price/EA Price/EA Price/EA

Pneumatic Mallet Hammer

4POINT (H/P) 4-Point Tool 180.00 180.009POINT (H/P) 9-Point Tool 225.00 225.005LPUNCH 5mm Light Duty Punch 65.00 69.00 67.006PUNCH20 6mm Punch 20mm Shank 67.00 75.00 72.006PUNCH22 6mm Punch 22mm Shank 69.00 78.00 75.0010HPUNCH 10mm Heavy Duty Punch 71.00 82.00 77.00SCRIBER Scriber 27.0012CLAW34 12mm Claw 3 or 4 teeth 81.00 93.00 90.0020CLAW4 20mm Claw 4 teeth 98.00 106.00 104.0025CLAW5 25mm Claw 5 teeth 119.00 126.00 124.0040CLAW7 40mm Claw 7 teeth 156.00 162.00 159.0050CLAW9 50mm Claw 9 teeth 207.00 217.00 214.006SWPUNCH 6mm Stone Walling Punch 65.0010SWPUNCH 10mm Stone Walling Punch 71.00300COMPASS 300mm Tipped Compass 135.00

KE-NE Pitchers & Nickers These are a Nicker and aPitcher with tungsten carbide tips. They are the ‘KeNe’ brand. The redones are for stone and marble and the blue for granite.They range from 1” (25mm) to 4” (100mm). They are generally availablein hammer head form but can be made as pneumatics if required.Item No. Description Price/Ea

D25SPIT 25mm Soft Stone Pitcher 125.00D37SPIT 37mm Soft Stone Pitcher 150.00D50SPIT 50mm Soft Stone Pitcher 176.00D75SPIT 75mm Soft Stone Pitcher 192.00D100SPIT 100mm Soft Stone Pitcher 345.00D25SNIC 25mm Soft Stone Nicker 125.00D37SNIC 37mm Soft Stone Nicker 150.00D50SNIC 50mm Soft Stone Nicker 176.00D75SNIC 75mm Soft Stone Nicker 224.00D100SNIC 100mm Soft Stone Nicker 345.00

DIAMACH/TROW & HOLDEN Offset Pitchers In collaboration with Trow &Holden, we have designed these pitchers to match the English style of Riley and Ke-Ne, with the famous qualityof the Trow & Holden brand. With smaller 7/8” stock these pitchers are perfect for use in Australian Sandstone.Lighter weight and longer lasting tips.


CHOM78112 38mm Pitcher 175.00CHOM782 50mm Pitcher 200.00CHOM78212 63mm Pitcher 225.00CHOM783 75mm Pitcher 250.00

KE-NE Granite Pitchers These are a Pitcher with tungsten carbide tips. They are the ‘KeNe’brand. They range from 1” (25mm) to 3 (75mm). They are generally available in hammer head form but can bemade as pneumatics if required.Item No. Description Price/EA

D25GPIT 25mm Granite Pitcher 169.00D37GPIT 37mm Granite Pitcher 225.00D50GPIT 50mm Granite Pitcher 237.00D63GPIT 63mm Granite Pitcher 248.00D75GPIT 75mm Granite Pitcher 285.00

mm 3 4 6 10 12 16 19 22 25 38 50 63 75 100

inches 1/8 3/16 1/4 3/8 1/2 5/8 3/4 7/8 1-1/4 1-1/2 2 2-1/2 3 4



GUILLET EUROP 2E Carbide TippedLettering Chisels Carbide Tipped Lettering Chisels forMarble and Granite, with long exposed tungsten they are alightweight chisel for intricate carving of letters for Letter cuttersand Monumental Masons alike. 190mm long. 4-10mm widthsfeature 10mm of tungsten, while the 15-20mm chisels have 12mm.With the optional adapters they can be used with mallets orpneumatic tools.

Item No. Blade Width Price/EA003400 4mm 27.00002806 6mm 29.00008692 8mm 30.00005497 10mm 31.00004354 12mm 34.00001015 15mm 35.00005263 20mm 37.00003035 Rounded Mallet Head 9.00009412 10.2 x 36mm Pneumatic Head 6.00003005 12.7 x 55mm Pneumatic Head 8.00Complete Set of 7 Chisels + Scriber + Tool Roll007342 241.00

GUILLET FORT 2E Carbide TippedMasonry Chisels Carbide Tipped Masonry Chisels forMarble and Sandstone. 220mm long, they have a heavier shaftfor comfortable use, and the mallet head supplied can beremoved and replaced with the optional pneumatic heads. The6-20mm width chisels feature 14mm of tungsten, while the 25has 16, the 30 has 18 and the 40 has 20mm of tungsten.

Item No. Blade Width Price/EA009796 6mm 60.00006601 10mm 62.00002515 15mm 68.00002254 20mm 69.00003982 25mm 76.00009508 30mm 80.00008104 40mm 93.00009535 Mallet Head for up to 25mm 13.00007870 Mallet Head for over 25mm 13.00

GUILLET FORT 2E Carbide Tipped HeavyLettering Chisels Carbide Tipped Lettering Chisels forMarble and Granite. 190mm long, they have a less exposedtungsten tip for strength in hard stone. The 4-12mm width chiselsfeature 10mm of tungsten, while the 15 and 20mm has 12mm.

Item No. Blade Width Price/EA001866 4mm 30.00006825 6mm 31.00003252 8mm 33.00001065 10mm 35.00009066 12mm 40.00005772 15mm 48.00009381 20mm 61.00Complete Set of 7 Chisels + Scriber + Tool Roll002857 312.00

GUILLET Carbide Tipped Tracer ChiselsMallet Head Carbide Tipped Tracer for Sandstone. Huge mallethead for comfortable use. 170mm long x 20mm shaft fits really well in thehand. Fine blade for detail work.

Item No. Blade Width Price/EA004638 25mm 95.00007887 30mm 106.00006258 40mm 125.00009039 50mm 162.00003180 55mm 147.00005925 60mm 164.00002226 80mm 236.00



GUILLET “CHOC” Carbide Tipped Chisels Carbide Tipped forMarble, Granite and Sandstone. Unique flat shape is very comfortable to use.Exceptionally strong chisels.

Item No. Blade Width Price/EA006757 15mm 59.00008702 20mm 62.00002148 20mm Octagonal 60.00007657 25mm 77.00009660 30mm 81.00

GUILLET Carbide Tipped Points/Punches Carbide Tipped for Marble, Granite and Sandstone

Item No. Blade Width Price/EA003962 10mm x 175mm Point 33.00009589 14mm x 210mm Point 53.00005299 16mm x 210mm Point 55.00008974 18mm x 210mm Point 63.00009994 20mm x 220mm Point 71.00002365 20mm x 220mm Point (Rounded) 78.00004697 20mm x 300mm Point 85.00001906 22mm x 220mm Point 81.00003985 28mm x 220mm Point (rounded) 103.00003327 14mm x 210mm Punch 53.00009867 16mm x 210mm Punch 55.00005947 18mm x 210mm Punch 63.00007757 20mm x 220mm Punch 71.00

GUILLET Stone Paving Pinch Bars

Item No. Blade Width/Shaft Width/Length Price/EA005431 30 x 16 x 300mm 52.00009913 30 x 18 x 450mm 62.00001165 40 x 20 x 600mm 74.00004045 40 x 22 x 800mm 96.00003757 50 x 25 x 1000mm 115.00008158 50 x 25 x 1300mm 136.00

GUILLET Carbide Tipped Pitchers Carbide Tipped for Marble, Granite and Sandstone

Item No. Blade Width Price/EA007113 50mm 114.00004078 32mm 112.00002782 40mm 119.00005357 40mm 153.00002886 40mm TCT Protected 153.00008712 50mm TCT Protected 217.00



GUILLET EUROP 2E Carbide Tipped Pneumatic Lettering Chisels Carbide Tipped Lettering Chisels forSandstone, with long exposed tungsten they are a lightweight chisel for intricate carving of letters for Letter cutters and Monumental Masons alike.210mm long. 4-10mm widths feature 10mm of tungsten, while the 15-20mm chisels have 12mm. 12.7 (1/2”) x 55mm Pneumatic end. Can besupplied with 10.2 x 36mm.

Item No. Blade Width Price/EA001250 6mm 54.00009341 10mm 57.00009044 15mm 64.00008873 20mm 68.00003500 25mm 72.00006713 30mm 75.00009261 40mm 102.00

GUILLET Carbide Tipped Points/Punches Carbide Tipped for Marble, Granite and Sandstone

Item No. Blade Width Price/EA009713 10mm x 175mm Point 41.00008239 14mm x 210mm Point 58.00002995 16mm x 210mm Point 63.00006339 18mm x 210mm Point 67.00006357 20mm x 220mm Point 73.00002173 14mm x 210mm Punch 58.00008976 16mm x 210mm Punch 63.00001828 18mm x 210mm Punch 67.00

GUILLET FORT 2E Carbide Tipped Pneumatic Masonry Chisels Carbide Tipped Masonry Chisels for Marbleand Sandstone. 250mm long, they have a heavier shaft for comfortable use. The 6-20mm width chisels feature 14mm of tungsten, while the 25 has16, the 30 has 18 and the 40 has 20mm of tungsten. 12.7mm (1/2”) x 55mm shank.

Item No. Blade Width Price/EA002083 6mm 54.00004504 10mm 57.00 57.00006799 15mm 64.00 64.00003037 20mm 68.00 68.00008860 25mm 72.00 72.00002911 30mm 75.00 75.00003937 40mm 93.00 93.00

GUILLET “CHOC” Carbide Tipped Pneumatic Chisels Carbide Tipped Chisels for Marble and Granite. Heavy dutywith 12.7mm (1/2”) x 55mm shank.

Item No. Blade Width Price/EA008839 15mm 70.00003133 20mm 73.00

GUILLET Carbide Tipped Pneumatic Claw Chisels Carbide Tipped Claw Chisels for Marble and Granite. 240mm long,with 12.7mm (1/2”) x 55mm shank.

Item No. Blade Width Price/EA009299 10mm 2 teeth 58.00002810 14mm 3 teeth 68.00005114 18mm 4 teeth 76.00003890 14mm 3 teeth 68.00003089 18mm 4 teeth 76.00001272 25mm 5 teeth 107.00



GUILLET Paviour’s Stone Hammers

Item No. Type Price/EA004911 Single Carbide 40 x 40 x 105mm 1200g 242.00001287 Double Carbide 40 x 40 x 105mm 750g 324.00006019 Double Carbide 40 x 40 x 105mm 1200g 363.00007693 Handle to suit 18.00

GUILLET Stonecarver’s Hammers

Item No. Type Price/EA004752 35 x 35 x 70mm 500g 115.00009783 35 x 35 x 95mm 750g 124.00009531 40 x 40 x 75mm 1450g 124.00

GUILLET Portuguese Round Stone Hammers

Item No. Type Price/EA002224 300g 80.00003601 400g 89.00001851 600g 95.00003972 800g 98.00001092 1000g 102.00005440 1250g 106.00009047 1450g 115.00

GUILLET Bushing Hammer Interchangeable Heads

Item No. Type Price/EA009398 40 x 40mm 25 & 49 Point 1960g 279.00

GUILLET Stonecutter’s Hammers

Item No. Type Price/EA006930 40 x 40 x 75mm 1000g 128.00003537 40 x 40 x 90mm 1250g 137.00001755 40 x 40 x 105mm 1450g 146.00

GUILLET Misc Tools

Item No. Description Price/EA005327 Tungsten Tipped Scribe 21.00008292 150mm Compass 68.00002523 200mm Compass 70.00008888 300mm Compass 87.00003557 Canvas Tool Roll 49.00

Complete GUILLET Pneumatic, Hand Chisel andHammer, Drill Bit Catalogues available online



GIBSON Dummy HammersThese Conical section types Dummy/DollyHammers are CNC machined from EN8 toprovide you with the perfect weight/sizebalance for carving with.Item No. Weight Price/EA

HMD1 1lb 63.00

HMD15 1-1/2lb 66.00HMD2 2lb 70.00

lb 0.5 1 1.5 2 3 4 5 6 8 10 12

kg 0.22 0.45 0.68 0.91 1.36 1.81 2.27 2.72 3.62 4.54 5.44

GIBSON ScutchesHardened Steel Inserts for cuttingStone/Brick/Plaster. Used by all trades, butespecially useful for Stone Carving/Masonry,to shape stone quickly, and by Electricians tocut channels and Back Box cutouts. Standard7 tpi (teeth per inch), but available in flat and5 tpiItem No. Width Price/EA

SC05 1/2” 0.70

SC1 1” 0.90SC15 1-1/2” 1.40SC2 2” 1.70GIBSON Masons Punch

HammersTraditionally used by Stone Masons, this Hammer isdesigned to deliver a very high impact blow into asmall area. Long sleek heads mean these Punchhammers have a momentum to their striking force.Fitted with a Hickory Shaft.Item No. Weight Price/EA

HMP3 3lb 75.00HMP4 4lb 80.00

GIBSON Scutch HammersFitted with a Hickory Shaft.Item No. Weight/Handle Price/EA

HSSEFG Single ended wood handle 66.00

HSDEFG Double ended wood handle 66.00

GIBSON Masons BushingHammersTraditionally used by Stone Masons, thisHammer is designed to deliver a very highimpact blow into a small area. Long sleekheads mean these Punch hammers have amomentum to their striking force. Fitted witha Hickory Shaft.Item No. Weight/Handle Price/EA

HMB3 3lb Hickory Handle 96.00

GIBSON Scottish DykersHammerItem No. Weight Price/EA

HSD4 4lb 93.00

GIBSON Scutch HoldersThese claw holders have a hardened and tempered tapered slot to allow the bit to sit correctlyin the holder. Available sizes from 1/2" to 2" in 1/2" steps.Item No. Description Price/EA Price/EA Price/EA

Pneumatic Mallet HammerSH12P/M/H 1/2” Scutch Holder 33.00 33.00 29.00RSH1P/M/H 1” Scutch Holder 40.00 40.00 32.00SH112P/M/H 1-1/2” Scutch Holder 49.00 49.00 37.00SH2P/M/H 2” Scutch Holder 51.00 51.00 40.00

GIBSON Green SiliconCarbide Hand Rubbing Blocks150 x 50 x 50mm, green silicon for faster shapingand smoothing stone.

Item No. Grit Price/EA

SCB20 # 20 35.00

SCB40 # 40 35.00

SCB60 # 60 35.00

SCB80 # 80 35.00



ON SITE SAFETY Disposable MasksCertified to Australian Standard AS/NZS 1716. Disposable type.Item No. Description Price/EA

P1 P1 Disposable Mask Box 20 16.50

P1V P1 Disposable Mask with Valve Box 10 12.95

P2 P2 Disposable Mask Box 20 19.95

P2V P1 Disposable Mask with Valve Box 10 13.50

ON SITE SAFETY Half Mask RespiratorNew design has a vent that expels air beneath the chin, keepinggoggles mist free. Certified to Australian Standard AS/NZS 1716Item No. Description Price/EA

RHMA1P2K A1P2 Half Mask Respirator Kit 66.00

RHMA1C Replacement A1 Cartridge 22.00

ON SITE SAFETY Hearing ProtectionCertified to Australian Standard AS/NZS 12702002Item No. Description Price/EA

DBOSS27 Uncorded Ear Plugs Box 200 35.00

DBOSS27C Corded Ear Plugs Box 100 35.00

M06 Javelin Ear Muffs 13.70

Need another catalogue for you or a mate?...Grab one instore or call me on 0417 466 505 and I will post one out, no charge!!

DIAMACH is proud to support Giant Steps,a school for children with Autism

Come in to view our range(by appointment please!)

Inside Storage King, 37-49 Alleyne St, Chatswood

Or view/download onlinewww.diamach.com.au

Diamach Catalogue

Documents

Transcript of Diamach Catalogue