HOW TO CONFIGURE DHCP SERVER SERVER
MADE BY ARIEF RIFKI FADILLAH
Firstly, Open control panel and open “Add or Remove Programs”
Secondly, Click “Add/Remove Windows Components”
Thirdly, Give Checklist “Network Services”. If it be installed , click it to “Detail”
Next, click ok and next
Next, open the DHCP
Next, Click “New scope” to make a scope
Next, click next. After that give a name and description .
Give a start IP and end IP. You can skip “New Scope Wizard”
Next, Give duration to your DHCP. Click next.
Next, Give an IP of your default gateway. And give a name for DNS server.
Next, Skip only for WINS server. And Click Next
The Installation Has been complited
If your client had a different IP with your DHCP IP, you must change it with DHCP
Your Server and client has been connected
Now, Make a second scope with a same step
Don’t different with first scope
Next, Change with second scope
If you don’t get a Trouble. It’s Finished
Thank You For Watching