DHARMENDRA KANTHARIAB/16, Tulshidham Society, Zadeshwar road,Bharuch-392011M.no- 09879588411E-mail-dharmendra.kantharia@hotmail.com

OBJECTIVE

I am looking to work for an organization that needs an Engineer with piping engineering background, preferably in the field of Chemicals, Petro-chemicals, and Refineries Projects. I would like to utilize the best of my creative & industrious abilities to enhance my career prospects and growth.

TOTAL EXPERIENCE – 7 YEARS

Software Skills:

PDMS 11.6 , PDMS 12 , AVEVA P&ID 12 , LFM MODULER , Pro/E , AUTOCAD

PRESENT STATUS:

CONTRACT JOB:

A) JACOBS ENGINEERING Private Ltd -VADODARA PDMS DESIGNER – PIPING (27th Feb 2012 to till date)

Project:

LUCIT International BeaumontPlant, NederlandPosition: PDMS DesignerJob profile -

Preparing Piping Layout & generating detail drawings. Routing of Small Bore and Large Bore Pipe as per P&ID & Piping Spec. Pipe rack piping, Utility piping, Vessel trim piping etc. Isometrics Extraction and Checking as per P&ID, Spec, Hookup. Worked on Design, Isodraft, and Draft Module. Supports Selection and Modeling as per Standards. Preparing & modeling special support drawing. Checking the Clash Status and ensure Clash free Modeling. Checking Isometric Drawings with Bill of Material. Re-issuing of isometrics by incorporating MTO, Process & Instrumentation comments. Updating of Markup P&ID's into Process Master.

B) MAC CONSULTANT-VADODARA ALSTOM POWER PROJECT INDIA LTD Vadodara-INDIA PDMS DESIGNER – PIPING (11th JULY 2011 to 12TH NOV 2011)

Project:

TIDONG HYDRO POWER LIMITED, Himachal PradeshPosition: PDMS DesignerJob profile –

Modeling of equipments,pipe routing, pipe support design, data consistency check, clash detection in PDMS

Reviewing of the pipe line routing, supporting by using AutoCAD.

Calculating Bill of material from the P & ID.

Involved in Preparation of Piping Layout.

Extraction of GA’ Drawings in PDMS Drawing Manager.

Extraction of isometrics.

Extraction of MTO reports.

Permanent job:

A) ENGINEERING CONCEPT & SOLUTIONS Vadodara

Sr.PDMS DESIGNER (11th March 2010 to 11th July 2011)

Project:

ONGC LTD. BOMBAY HIGH WIS & SA PLATFORMS

Position: PDMS DesignerJob Responsibilities:

Creation of intelligent As-Built 3D Model of WIS & SA offshore Platforms from Laser scans data. Comparison of As-Built 3d model with Updated As-Built P&ID. Preparing P&ID on AVEVA P&ID Preparing laser scans 3d model on LFM MODULER Software. Preparing intelligent 3d Model in PDMS 12

PIDILITE INDUSTRIES LTD, SEZ DAHEJ (GUJARAT)

Position: PDMS Designer Job Responsibilities:

Preparing piping Drawings Involved in Preparation of Piping Layout. Extraction of GA’ Drawings in PDMS Drawing Manager. Extraction of isometrics.

Extraction of MTO reports. Piping routing sketching & modeling as per the system requirements using P&I Diagrams.

B) IPEBS PVT.LTD as a Piping Layout Engineer from (JUNE 2007 TO FEB 2010)

Project: JEBEL ALI POWER AND DESALINATION STATION “L” – PHASE II, DUBAI ELECTRICITY AND WATER AUTHORITY

Position: Piping Layout EngineerJob Responsibilities:

Generating documents such as General arrangement drawings Piping Layouts, isometrics, Design of pipe (thickness calculations) as per various codes (ASME 31.3 etc).

Preparing piping Drawings Involved in Preparation of Piping Layout. Extraction of GA’ Drawings in PDMS Drawing Manager. Extraction of isometrics. Preparation of Spool drawings for fabrication.

Extraction of MTO reports.

Water Treatment Plant – Aquatech International Corporation.Occidental Mukhaizna L.L.C. Oman, Muscat.

Position: Piping DraftsmanJob Responsibilities:

Equipment modeling Piping routing sketching & modeling as per the system requirements using P&I Diagrams. Preparation of Piping Isometrics and MTO. Generation of 2D GA Drawings for Piping Pipe wall thickness calculations,

Project name: ITC (Paper and Pulp Industry), Andhra Pradesh Position: Piping DraftsmanJob Responsibilities:

Checking Piping GA’s against P & ID’s Checking MTO’s against GA & Isometrics.

Reviewing of the pipeline routing.

Design of pipe (thickness calculations) as per code (ASME 31.3 etc). Piping routing sketching & modeling as per the system requirements using P&I Diagrams.

C) Techno Engineers, Bharuch (Gujarat)

Draughtsman Mechanical (Feb 2005 TO March 2007)

Job profile – Preparation of industrial equipment parts and fabrication Design and Detail drawings with bill of materials

Creating 3D-models for the required components by using the PRO-E and AUTO CAD-2006

Software.

Designing & drafting the complete mechanical layouts & sectional details of spare parts.

Erection design & drafting for new machineries

Marking the exact dimensions at the site for installation

Instructing the installation team for the installation procedure

Workshop supervision

ACADEMIC QUALIFICATIONS:

Diploma in Mechanical Engineering Rajasthan University, Udaipur, India

ITI (Draughtsman Mechanical) Industrial Training Institute Ankleshwar, Gujarat (INDIA)

Process Piping Design and Drafting per ASME B 31.3 IPEBS Institute of piping Engg & Building Services, Hyderabad

Plant Design Management System (PDMS) IPEBS Institute of piping Engg & Building Services, Hyderabad

DIPLOMA IN MECHANICAL CADD (AUTOCAD, PRO/E) CADD Center Bharuch

PERSONAL SKILLS

Strong Analytical, Problem solving, Innovation, Adaptability and Quick Learning skills. Work well individually as well in team, hard working. Highly organized and dedicated, with a positive attitude.

Able to handle multiple assignments under high pressure.

PERSONNEL PROFILE

Name : DHARMENDRA KANTHARIA

Father’s Name : JAYANTILAL KANTHARIA

Address : B – 16, TULSHIDHAM SOCIETY,ZADESHWAR ROAD, BHARUCH-392011GUJARAT (INDIA)

Sex : Male

Date of Birth : 10/11/1983

Marital Status : Married

Languages known : English, Gujarati, Hindi

Nationality : Indian

Passport No : G7541613 (Expiry Date - 15/05/2018)

DECLARATION

I hereby declare that all the information furnished above is true to the best of my knowledge and belief.

Name - DHARMENDRA KANTHARIA

Sign - _________________

Date - __________________