DFSDFSDF
-
Upload
satish-mehta -
Category
Documents
-
view
2 -
download
0
description
Transcript of DFSDFSDF
pectrum of segments, such as, architectural, electrical, industrial, transport, defence and consumer durables among others. Hindalco Extrusions is a leading brand in each of these segments.
Manufacturing capabilities
A. The Circumscribing Circle Diameter (CCD)
Generally:
For solid profiles: maximum 330 mm*
For hollow profiles: maximum 225 mm*
* the range may vary depending on profile / alloy
Aluminium for extrusion is mostly alloys with the following serial numbers:
1000 series – Al
6000 series – Al + Mg + Si
7000 series – Al + Zn + Mg
The 1000 series is non heat treatable. These alloys are often chosen in products where high thermal and electrical
conductivity are desired. They have low strength.
The 6000 and 7000 series are heat treatable. They are the most commonly used extrusion alloys and have a wide
range of applications.
The 6000 series has good extrudability and can be solution heat treate