Thermoset modified with polyethersulfone: characterization ...
Development & Formulation / Production THERMOSET & … export abstract 2018.pdfDevelopment &...
Transcript of Development & Formulation / Production THERMOSET & … export abstract 2018.pdfDevelopment &...
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
Presentation
1) Raigi’s Presentation
2) Solutions for Electrical Networksa) Undeground Junction Cable
b) Rodent Barriers
3) Other RAIGI’s opportunities
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
1) Raigi’s Presentation
See our website www.raigi.com
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
2) Solutions for Electrical Networks:
RAIGI is involved in different materials and work with associated companies to provide a global offer.
We have a large range of raw materials, Epoxy, Polyurethanne and Latex.
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
2) Solutions for Electrical Networks:
a) Undeground Junction Cable :
Raigi develop different kinds of materials, see enclosed. Raigi also provide a complete solution, a kitting ready to be used.
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
a) Undeground Junction Cable synthesis :
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
PU Epoxy PU Epoxy
FR-NFC 33010
(previous French Market) J6608-2/F E350/D950 -
E355/D955 (dérogation)
E350/D950 E355K/D955K
E400/D440 E405/D445
J7627/F
J7610/L
R8521/FP
J1515/VS (gel)
R4944/HR (high water resistance)
Others - - -
HTA BT
H-M24-2008
(French & Export market)J7618/SK -
HD 631
(European Market)-
J0640/AM(sans isocyanate)
-
a) Undeground Junction Cable, Technical Data Sheet:
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
Resin Hardener Nature FillersHazardous
MDIUsage Low Voltage
HTA (middle
Voltage)Avantages Inconvenients Packing in bags Packins in drums Regulations
J6608-2 F PU Yes Yes In Box No Low CostMDI, hazardous
isocyanateYes Yes NF C33010
J7618 SK PU Yes No In Box Yes No MDI, Bio based raw materials Yes YesHM24-2008-
00586-FR
J7627 F PU Yes YesIn tapes and
In boxYes Low cost with Bio based raw materials
MDI, hazardous
isocyanateYes Yes HD 631
J7610 L PU Yes YesIn tapes and
In boxYes Low cost with Bio based raw materials
MDI, hazardous
isocyanateYes Yes HD 631
J1515 VS PU No YesIn Box for Phones, low
voltageNo PU Gelly
MDI, hazardous
isocyanateNo Yes
E400 D440 Epoxy Yes No In Tapes YesLow cost, low and high temperature
reactivity, Bio base raw materialsLow exoterm Yes Yes
HM24-2008-
00586-FR
E405 D445 Epoxy Yes No In Box NoCoût, réactivité à basse température,
viscosité, MP biosourcéesYes Yes
HM24-2008-
00586-FR
J0640 AMSans
isocyanateYes No In Box No Not any risk of use Expensive solution Yes Yes
EXB01 UNDERGROUND CABLE BRANCH JOINT FOR LV CABLES UP TO 185MM²
Page 9
� RWE Type tested according to DIN EN 50393
� Resin qualification acc. to NF C33.010 & HD 631.1
� Connector tested acc. DIN VDE 0220-3
� Apave tested with load 80N after 60’’ of resin filling
Page 10
A complete kit :
� Easy to install� High quality of the resin� IP2X Connector� Double sealing with
labyrinth sealing and foam sealing at cable entry
� Vertical installation of the joint
� Impact resistant� Type tests certified
2) Solutions for Electrical Networks:
b) Rodent Barrier
Non Hazardous Solutions to
Protect from Rodent and insects.
Pest Control solutions.
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
Page 12
PFP Mastic
RODENT BARRIER Cartridges
Page 13
Main caracteristics :
• Rodent Barrier Mastic / • Fire Protection (I2 NF F 16-101/102)• Water resistant / Rodent Attacks resistant• To seal up to 20 cm diameter holes• Non corrosive, non toxic, non hazardous :
Based on natural products.• Easy to apply and make a good finishing. • Need only a jointer.
Color :
Smell :
Eucalyptus
3 formats :
7 kg 20 kgCatridge310 ml
3) Other RAIGI’s opportunities
We develop and sell elastomers for other business activities.
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
Some products : Concrete moulding
Main departments
T : RAIGI makes the partF : RAIGI sales the raw material
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC
Thank you for your attention
General ManagerMr. Olivier PERRIER
[email protected]: +33 6 84 79 44 00
HEADQUARTERS
Arbouville28310 Rouvray Saint-Denis
FranceTel: +33 2 37 33 30 40 Fax: +33 2 37 22 70 49
Development & Formulation / Production
Molding PU . Rotomolding
THERMOSET &
THERMOPLASTIC