Determination of Cu in Kangkong and Kamote
-
Upload
karina-narciso -
Category
Documents
-
view
53 -
download
4
Transcript of Determination of Cu in Kangkong and Kamote
Experiment 6. Atomic Absorption Spectroscopy
Kangkong and kamote tops were used as samples for the experiment. Atomic absorption spectroscopy
was used to determine the copper content of the samples. Following are the data obtained from the
experiment.
Absorbance of standards
Standard Concentration (ppm) Absorbance
Blank 0 0.0123
1 1.00 0.1937
2 2.50 0.3685
3 5.00 0.6789
4 10.00 1.1751
Absorbance of samples
Kangkong:
Sample Absorbance
1 0.0498
2 0.0475
3 0.0475
Kamote:
Sample Absorbance
1 0.1219
2 0.1278
3 0.1134
Standard addition Method
Kangkong:
Standard Volume of solution (mL) Absorbance
Trial 1 Trial 2 Trial 3
1 0.00 0.0119 0.0127 0.0133
2 0.50 0.1619 0.1632 0.1612
3 1.25 0.3350 0.3311 0.3282
4 2.50 0.6165 0.6147 0.6148
5 5.00 1.0855 1.0820 1.0820
Kamote:
Standard Volume of solution (mL) Absorbance
Trial 1 Trial 2 Trial 3
1 0.00 0.0272 0.0261 0.0276
2 0.50 0.1696 0.1679 0.1733
3 1.25 0.3308 0.3315 0.3317
4 2.50 0.6200 0.6191 0.6202
5 5.00 1.1073 1.1078 1.1088