Charles E. Floyd 1927 69th Street, Lubbock, TX 79412 ● 806-401-3273 ● cadtechguy@gmail.com

OBJECTIVE: CAD Design Engineer/Checker/Project Management

SKILLS

Proficient in the following: Pro/Engineer (ProE) Creo Elements Solidworks 2014 Inventor 2016 FEA Drawing and model checking Strong GD&T Applications Pro/Windchill & Intralink Catia V5 AutoCAD Layout, assembly, detail & sheet metal drawings MS Word, Excel, PowerPoint, Access, Outlook & QuickBooks Project Management/Presentations Supervision Database Management Research and Analysis

EXPERIENCE

May 2015 to Present Sun-Star Electric, Lubbock, TXSenior Design EngineerDirect hire. Use Inventor and AutoCAD software and GD&T applications to create solid models, complex assemblies, installation drawings, detail, and assembly drawings for this manufacturer of submersible electric motors. Model and assemble cast housing and flanges, gears, splines, shafts and other components which makes up the submersible electric motors.Assign projects from manager to draftsman, check drawings and models from the whole department, and supervise the draftsman. Create FEA reports for the engineering department. Create new and repair jobs with the Epicor inventory system. Part of weekly production meetings personnel.

May 2014 to January 2015 John Deere Coffeyville Works, Coffeyville, KSMechanical Engineer/DesignerDirect hire, Used ProE Creo 2.0 and AutoCAD software and GD&T applications to create solid models, complex assemblies, installation drawings, detail, sheetmetal and assembly drawings for this manufacturer of agricultural and construction axles and transmissions. Modeled and assembled cast housing and flanges, gears, splines, shafts and other components which makes up the axles and transmissions.

January 2012 to March 2014 Curtiss Wright, Houston,TX Senior Designer Direct hire, Used ProE Creo Elements (ProE v5) and AutoCAD software and GD&T applications to create solid models, complex assemblies, installation drawings, detail, sheetmetal and assembly drawings for this manufacturer of Hydraulic Power Units and

Charles E. Floyd 2

Actuators for this oil and gas industry leader. Modeled and assembled cast housing and flanges, gears, splines, shafts and other components which makes up the HPU and actuators.

August 2010 to October 2011, Eaton Aerospace, Jackson, MS (New Era Recruiters) Design Engineer Contractor, Hydraulic Systems Group, using ProE Wildfire, CATIA V5 and AutoCAD software and GD&T applications to create solid models, complex assemblies, installation drawings, detail, sheetmetal and assembly drawings for this manufacturer of small to large hydraulic pumps and motors for the aerospace industry. Configured, modeled, and assembled cast housing and flanges, gears, splines, shafts and other components which makes up the hydraulic pumps and motors.

May 2008 to June 2010, Lockheed Martin, New Orleans, LA (Total Technical Inc) Design Engineer/CheckerContractor, Orion Service Module Group, NASA Michoud Assembly Facility, using ProE Wildfire software, Pro/Windchill and GD&T applications to create and check solid models, complex assemblies, sheetmetal, weldment, detail and assembly drawings for this manufacturer of next generation of spacecraft to replace space shuttle. Certified CAD drawing and model checker.

January 2008 to May 2008, DESA Intl., Bowling Green, KY (Black Diamond Network) Design EngineerContractor, Indoor/Outdoor Heating Group, using ProE Wildfire software and GD&T applications to create and check solid models, complex assemblies, weldment, sheetmetal, detail and assembly drawings for this manufacturer of small to large heating units for commercial, retail or home uses.

September 2007 to January 2008, Manitowoc Cranes, Manitowoc, WI (Total Technical Inc) Design Engineer Contractor, Powerplant design (configured Cummins diesel engines, hydraulic reservoirs, fuel tanks, air intake and coolant systems, hydraulic pumps and motors, and structures) in Powerplant and Structures Group, using ProE Wildfire software, Pro/Intralink, and GD&T applications to create and check solid models, complex assemblies, weldment, sheetmetal, detail, and assembly drawings for this manufacturer of small to large cranes for construction and marine uses.

August 2005 to September 2007, BAE Systems, Sealy, TX (Advanced Technology Innovations Inc)

Design Engineer Contractor, Cab Design Group, using ProE Wildfire software, Pro/Intralink and GD&T applications to create and check solid models, complex assemblies, weldment, sheetmetal, detail and assembly drawings for this military truck manufacturer. Configured diesel engines, truck frames, wheel assemblies, and other truck components in day to day activities.

November 2004 to August 2005 US LOGISTICS, Killeen, TX Inspector/MechanicDirect hire, technical inspection and directed mechanics for repair of military vehicle for continued duty (non-engineering related position).

Charles E. Floyd 3

March 2004 to November 2004 WORLD WIDE AUTOMOTIVE, Winchester, VA Catalog Specialist Direct Hire, did research and analysis of aftermarket alternators and starters. MS FoxPro software used extensively to keep data of various automotive and heavy equipment records updated and modified. Strong GD&T application. Assisted the creation of catalogs for publication. Worked with customer service representatives to satisfy customer alternator and starter requirements.

More work history is available upon request.

EDUCATION Middle Tennessee State University, Murfreesboro, TN Motlow State Community College, Tullahoma, TN Jones College, Jacksonville, FL

REFERENCES

Jeremy Meadows, 13926 Turning Spring Ln., Houston, TX 77044 713-292-3953

Steve Henson, 7020 Evans St., Houston, TX 77061 713-857-2876

Judy Belonger, 2679 Colonial Drive, Elgin, IL 60124 847-942-5061