DESS LIBRARY GUIDE - Amazon Web Services › 3Shape...50.047 52.047 15.007 1 5.054 2 - DESS ANGLE...

DESSLIBRARY GUIDEFOR HYBRID ABUTMENTS, BRIDGES, BARS AND PROSTHESIS

How to use the library file for single unit engaging and non engaging cases -

How to use the library file for "ON" Multiunit Restorations

Page

1

2

3

4

6

13

17

20

23

25

27

3Shape Dental System – Implant & Abutment Level Scan Category Descriptions

Section 1 - Category = DESS Titanium Base (Straight Ti Base)

Section 3 - Category = DESS Pre-milled Ti - For Custom Titanium Abutments

Section 2 - Category = DESS Angle Base (AngleBase Ti Base)

Section 4 - Category = DESS Pre-milled CoCr - For Custom Chrome Cobalt Abutments

Section 5 - Category = DESS Multiunit & Uniabutment Plus Interface

Section 6 - Category = DESS MultiUnit & Uniabutment Direct

Section 7 - Category = DESS MultiUnit Direct

Choosing the Right Scan Body

Section 8 - Category = DESS Str Syn Direct

Section 9 - Category = DESS UniAbutment Direct

TABLE OF CONTENTS

HOW TO USE THE LIBRARY FILE FOR SINGLE UNIT ENGAGING & NON ENGAGING CASES

Platform Analog Type TiBase # System Kit Scan Body

NobelActive®

RP4.3/5.0

14.042DESS NOB ACT

TI-BASE

NOB_ACT_RP NE 15.04215.342

50.042 52.042

50.500

NOB_ACT_RP E 16.04216.342

50.042 52.042

50.600

15.04215.342

16.04216.342

RP 14.042 DESS NOB ACTAngle Base

NOB_ACT_RP NE 36.04250.042 52.042

50.500

NOB_ACT_RP E 37.04250.042 52.042

50.600

36.042

37.042

RP 14.042 61.042ø10mm

NOB_ACT_RP E 62.042ø14mm

50.042 52.042DESS NOB ACT PRE-MILLED TI

Category - there are four categories for single unit cases - The Category names are as follows:

1. DESS Ti Base - for using the DESS Straight ti bases (parts 15.xxx and 16.xxx)2. DESS Angle Base - for using the DESS AngleBase ti bases (parts 36.xxx and 37.xxx)3. DESS Pre-milled Abutment Ti - for making custom titanium abutments ( parts 61.xxx and 62.xxx)4. DESS Pre-milled Abutment CoCr - for making custom chrome cobalt abutments (part 71.xxx)

System - this identifies the implant system you are using and type of part you will be making. In the image above DESS NOB ACT is Nobel Active and TI-BASE is for the Straight ti base, ANGLE Base is for the AngleBase ti base, and PRE-MILLED TI is for the custom titanium abutment.

Kit - this is where you choose the part that you are going to use. It contains four parts- implant system, the platform, if the part is engaging or non engaging, and the part number.

NOB_ACT_RP NE 15.042

The platform terms we use is NP/RP/WP even though systems such as Zimmer use 3.5/4.5/5.7. This is designed to simply choosing the appropriate library file.

Kit for the Straight TiBase -Since DESS makes straight ti bases with different collar heights you will notice that there are two (2) Nobel Active RP Platform Non Engaging ti bases to choose from 15.042, which has a 1.5 collar, and 15.342, which has a 3mm collar. (See Above)

Kit for the Straight AngleBase -DESS currently makes one collar height for the AngleBase so you will see only one kit to choose from for Nobel Active RP Platform Non Engaging AngleBase ti base which is NOB_ACT_RP NE 36.042

Kit for the Custom Titanium Abutment -DESS currently makes two different diameter premill blanks for Nobel Active custom titanium abutment engaging . One is 10mmD (61.042) and the other 14mmD (62.042) so you will see NOB_ACT_RP E 61.042 and 62.042.For the Chrome Cobalt Custom Abutment there is one 14mmD so only one kit per each platform.

First you choose the Category which then determines the System and then you choose the Kit

1

HOW TO USE THE LIBRARY FILE FOR "ON" MULTIUNIT RESTORATIONS

Category - there are three categories for multiunit cases - The Category names are as follows:

1- DESS TI-BASE - for using the DESS Multiunit ti base RP (15.007 or 15.007/8 ) or WP (15.054)

First you choose the Category which then determines the System and then you choose the Kit


MultiUnitRP 14.007

DESS MULTI-UNIT®

TI-BASEMulti_Unit_RP NE 15.007 50.007

52.007

WP 14.047 DESS MULTI-UNIT®

TI-BASEMulti_Unit_RP E 15.054

50.047

52.047

15.007

15.054

2 - DESS ANGLE BASE - for using the DESS AngleBase ti base for Multiunit RP(36.007) or WP (36.054)

15.007/8 Multi_Unit_RP NE 15.007/8

MultiUnitRP 14.007

DESS MULTI-UNIT®

ANGLE BASEMulti_Unit_RP NE 36.007

50.00752.007


ANGLE BASEMulti_Unit_WP NE 36.054 50.047

52.047

36.007

36.054


Platform Analog System Kit Scan Body

Multiunit

RP 14.007 DESS MULTI-UNIT DIRECT Multi-unit50.007

52.007

WP 14.047 DESS MULTI-UNIT DIRECT Multi-unit

50.047

52.047

DESS MUILTI UNIT DIRECT** - for designing a multiunit bar for ontop of the multiunit without the use of ti bases.3 -

**Due to FDA concerns 3Shape software will block you from outputting a complete STL for the multiunit direct bar. We have milling partners that can assist you.

2

PLEASE READ:Most, but not all, multiunit abutments have the same geometries on the top of them. The DESS multiunit ti base, AngleBase, and direct to multiunit are compatible with the following RP multiunits - Nobel Replace, Nobel Active, Branemark, BioHorizons, 3i Low Profile, and Megagen, Hiossen, Neodent, Astra EV Multibase.This includes all of the multiunits from these companies regardless of the implant platform (except for Branemark WP).

The following multiunit's have a proprietary top and will not work with these parts- Zimmer, Implant Direct. Many companies claim to have the same design on top of their multiunits as the original Nobel multiunit but do not so please do your due diligence.

The specific Neodent CM and GM 4.8mmD abutments are compatible with these parts-GM - Abutment, Exact Abutment, Mini Conical Abutment - Straight and 17/30 Degree Angle.CM - Mini Abutment, Abutment, Mini Conical Abutment, WS CM Angled Mini Abutment and WS Abutment. DESS has multiunit tibases for Straumann SRA (and direct too) and MIS Multiunits too.

The WP is used on only the Branemark WP multiunit, which is only placed into a BranemarkWP implant.

The scan body provides you the angulation, orientation, and depth of the implant that is being scanned. All of the scan bodies use the same library files.

There are 3 scan body options - Lab, Intraoral, and Scan Body on Ti Base.

DESS makes straight ti bases that have different collar heights so 16.042 has a 1.5mm collar height and 16.342 has a 3mm collar height. I would reference our online catalog which list out the various collar heights.

For using a AngleBase ti base you will choose the Category/Library File - DESS Aurum Base

The System for the Nobel Active AngleBase is DESS NOB ACT AURUM BASE. What this means is all of the AngleBase ti bases both engaging and non engaging are part of that system.

The Kit will state the implant system - NOB_ACT (Nobel Active) and the platform (RP) and if the straight ti base is engaging (E) or non engaging (NE).

For Example NOB_ACT_RP E is a Nobel Active RP platform engaging for the AngleBase ti base. It will also have the AngleBase ti base part number 37.042.

Lab Scan Body50.0XX

Intra Oral Scan Body 52.0XX

Scan Body on

TiBase 50.500 (NE)

50.600 (E)

1. The lab scan body is part 50.xxx2. Intra Oral Scan body is part 52.xxx3.

1. How they work?These scan bodies slide over both the Straight Ti Base and AngleBase ti bases.

2. Can they be used both intraorally and with a lab scanner? YES3. Are they reusable? Yes. They are made of PEEK and you can autoclave them.4. Can I print or mill them myself? YES we have a FREE STL file just email or call us and

we will email it to you ([email protected] / 855 337 7872).

PLEASE NOTE :With a DESS ti base or angle base and this "scan body on ti base" you can use it to scan the case and then choose either a different straight ti base with other collar height or a DESS AngleBase ti base. For the engaging ti base scan body only you can choose either an engaging or non engaging tibaseThey are not to be used for designing a DESS custom titatnium abutment, or DESS chrome cobalt custom abutment. You will need to use either the desktop scan body or intraoral scan body. Also they are not for all implant systems. The scan body will be indicated in the library file's in this document.

CHOOSING THE RIGHT SCAN BODY3

Scan Body on Ti Base INFORMATION- PLEASE READ THIS

What is the scan body on ti base name when I choose this scan flag?50.600/53.200 scan body on engaging ti bases the scan flag name is "53200_scan Ti Base _ 3.0 E"50.500/53.100 scan body on non engaging ti bases the scan flag name is "53100_scan Ti Base _ 1.5 NE"

14mm height x 6mm wide

7.5mm height x 4mm wide

7.5mm height x 4mm wide(approx. measurements excluding platform connection)

Scan Abutment on Ti Base (50.500 & 50.600)

3Shape Dental System – Implant & Abutment Level scan Category Descriptions

Section 1 - Category = DESS Ti Base (Straight Ti Base) This library is for using any of the following straight ti bases - engaging, nonengaging, on top of multiunits (including DESS, Nobel, BioHorizons, Megagen, Hiossen, Neodent, Straumann SRA, MIS, Astra Uniabutments, and on top of synOcta® abutment).



This library is for designing custom titanium abutments using the DESS premill blanks which can be milled in house or by a DESS Authorized milling center.

Section 4 - Category = DESS Pre-milled Co - For Custom Chrome Cobalt Abutments

This library is for designing custom chrome cobalt abutments using the DESS premill blanks which can be milled in house or by a DESS Authorized milling center.

This library is for choosing one of the DESS straight Multiunit abutments for Nobel Replace, Nobel Active, Branemark, Straumann Bone Level, Internal Hex/Zimmer/BioHorizons/MIS or External Hex along with the DESS multiunit ti base (part #15.007).

For Astra Osseospeed or Astra EV ou can choose the appropriate DESS UniAbutment along with UniAbutment ti base. This is ideal for designing the restoration from the implant level up where you can determine which DESS Multiunit and multiunit ti base to restore with (and for Astra the DESS UniAbutment and Uniabutment ti base).


This library is for choosing one of the DESS straight Multiunit abutments compatible with Nobel Replace, Nobel Active, Branemark, Straumann Bone Level, Internal Hex/Zimmer/BioHorizons/MIS or External Hex . If you are restoring an Astra Osseospeed or Astra EV implant than you can choose the appropriate DESS UniAbutment. This is ideal for designing the restoration from the implant level up where you can determine if you wish to use aDESS multiunit ( or Uniabutment when restoring Astra).

The DESS library files enable you with the scan body data to create restorations using different DESS components including Straight Ti Bases, AngleBase Ti Bases, Straight and Angled Multiunits, screws, and analogs (for digital models). Please read this page regarding the different library files available, which are choosen under the Category drop down in 3shape.

Section 2 - Category = DESS Angle Base (AngleBase Ti Base)This library is for using any of the following DESS AngleBase tibases - engaging, nonengaging, and on top of multiunit (36.007). The system name is "Dess Angle Base".

4

This library is for designing a bar directly on top of the Uniabutment for Astra Osseospeed or EV (not using any ti bases). The scan body is physically mounted on the uniabutment analog model or scanned intraorally directly on the unibutment.


This library is for designing a bar directly on top of the multiunits (not using any ti bases). The scan body used is the multiunit desktop or intraoral (50.007/52.007). The multiunit will have to be physically mounted on the model or scanned intraorally.There is a library for Straumann SRA Direct as well.


This library is for designing a bar directly on top of the synOcta 1.5 abutment or the DESS converter abutment for Straumann Tissue level (not using any ti bases). The scan body for synOcta is used - part # 50.010/52.010 (RN) or 50.048/52.048 (WN). The scan body is physically mounted on the model or scanned intraorally directly on the abutment.


Library Files to Design Bars on top of Multiunit, synOcta, Uniabutment without ti bases

Please Note - 3Shape users may experience output issues with this in the USA due to FDA restrictions. We work with several milling centers that can provide this service if required.

3Shape Dental System – Implant & Abutment Level scan Category Descriptions 1

5


NobelActive®

3.0 14.068DESS NOB ACT

TI-BASE

NOB_ACT_3.0 NE 15.06852.068

50.500

NOB_ACT_3.0 NE 16.06852.068

50.600

NP/3.5 14.041 DESS NOB ACTTI-BASE

NOB_ACT_NP NE 15.041

15.34150.041 52.041

50.500

NOB_ACT_NP E 16.041

16.341

50.041 52.041

50.600

RP4.3/5.0

14.042DESS NOB ACT

TI-BASE NOB_ACT_RP NE

15.042

15.34250.042 52.042

50.500

NOB_ACT_RP E 16.04216.342

50.042 52.042

50.600

WP/5.5 14.069DESS NOB ACT

TI-BASE

NOB_ACT_WP NE 15.06952.069

50.500

NOB_ACT_WP NE 16.06952.069

50.600

NobelReplaceSelectTM

NP/3.5 14.004DESS NOB RPL

TI-BASE

15.004NOB_RPL_NP NE 15.204

15.304

50.004 52.004

50.50016.004

NOB_RPL_NP E 16.20416.304

50.004 52.004

50.600

RP/4.3 14.005DESS NOB RPL

TI-BASE

15.005NOB_RPL_RP NE 15.205

15.305

50.005 52.005

50.50016.005

NOB_RPL_RP E 16.20516.305

50.005 52.005

50.600

WP/5.0 14.006DESS NOB RPL

TI-BASE

15.006NOB_RPL_WP NE 15.206

15.306

50.006 52.006

50.50016.006

NOB_RPL_WP E 16.20616.306

50.006 52.006

50.600

6.0 14.097DESS NOB RPL

TI-BASE

NOB_RPL_NP 6.0 15.09752.097

50.500

NOB_RPL_NP 6.0 16.09752.097

50.600


MultiUnitRP 14.007

DESS MULTI-UNIT®

TI-BASEMulti_Unit_RP NE 15.007 50.007

52.007


TI-BASEMulti_Unit_RP E 15.054

50.047

52.047

non-engaging engaging Lab Scan Body50.0XX

Intra Oral Scan Body52.0XX

Scan Body on TiBase

50.500 (NE) 50.600 (E)

15.04115.341

16.04116.341

15.04215.342

15.007

15.054

15.068

16.068

16.04216.342

15.069

16.069

15.00415.20415.30416.00416.20416.30415.00515.20515.30516.00516.20516.30515.00615.20615.30616.00616.20616.306

15.097

16.097

Nobel ConicalConnection

6

Multi_Unit_RP NE 15.007/8

Nobel

Brånemark®

NP/3.5 14.001DESS NOB BRK

TI-BASE

15.001NOB_BRK_NP NE 15.201

15.301

50.001 52.001

50.50016.001

NOB_BRK_NP E 16.20116.301

50.001 52.001

50.600

RP/4.1 14.002DESS NOB BRK

TI-BASE

15.002NOB_BRK_RP NE 15.202

15.302

50.002 52.002

50.50016.002

NOB_BRK_RP E 16.20216.302

50.002 52.002

50.600

WP/5.0 14.003 DESS NOB BRK TI-BASE

15.003NOB_BRK_WP NE 15.203

15.303

50.003 52.003

50.50016.003

NOB_BRK_WP E 16.20316.303

50.003 52.003

50.600

Platform Analog Type Tibase System Kit Scan Body

3i Osseotite®

NP/3.4 14.011DESS 3I OSS

TI-BASE

15.0113I_OSS_NP NE 15.211

15.311

50.011 52.011

50.50016.011

3I_OSS_NP E 16.21116.311

50.011 52.011

50.600

RP/4.1 14.012DESS 3I OSS

TI-BASE

15.0123I_OSS_RP NE 15.212

15.312

50.012 52.012

50.50016.012

3I_OSS_NP E 16.21216.312

50.012 52.012

50.600

WP/5.0 14.013 DESS 3I OSSTI-BASE

15.0133I_OSS_WP NE 15.213

15.313

50.013 52.013

50.50016.013

3I_OSS_WP E 16.21316.313

50.013 52.013

50.600

3i Certain®

NP/3.4 14.014DESS 3I CER

TI-BASE

15.0143I_CER_NP NE 15.214

15.314

50.014 52.014

50.50016.014

3I_CER_NP E 16.21416.314

50.014 52.014

50.600

RP/4.1 14.015DESS 3I CER

TI-BASE

15.0153I_CER_RP NE 15.215

15.315

50.015 52.015

50.50016.015

3I_CER_RP E 16.21516.315

50.015 52.015

50.600

WP/5.0 14.016 DESS 3I CERTI-BASE

15.0163I_CER_WP NE 15.216

15.316

50.016 52.016

50.50016.016

3I_CER_WP E 16.21616.316

50.016 52.016

50.600

External Hex

External Hex

non-engaging engaging

7

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)

15.00115.20115.30116.00116.20116.301

15.00215.20215.30216.00216.20216.30215.00315.20315.30316.00316.20316.30315.01115.21115.31116.01116.21116.31115.01215.21215.31216.01216.21216.31215.01315.21315.31316.01316.21316.31315.01415.21415.31416.01416.21416.31415.01515.21515.31516.01516.21516.31515.01615.21615.31616.01616.21616.316




Straumann®

Tissue Level

NNC/3.5 14.070DESS STR STLV

TI-BASE

NOB_ACT_WP NE 15.06952.069

NOB_ACT_WP NE 16.06952.069

RN4.1/4.8

14.009DESS STR STLV

TI-BASE

STR STLV RN NE 15.04650.009 52.009

STR STLV RN E 16.00950.009 52.009

RN on 14.010

DESS STR STLV TI-BASE

STR SYN RN NE 15.01050.010 52.010

STR SYN RN E 16.01050.010 52.010

WN4.8/6.5

14.045DESS STR STLV

TI-BASE

STR STLV WP NE 15.04550.045 52.045

STR STLV WP E 16.04550.045 52.045

WN on synOCTA®

abutment

14.046 DESS STR STLV TI-BASE

STR SYN WN NE 15.04850.015 52.015

STR SYN WN E 16.04850.015 52.015

Straumann®

Bone Level

NC/3.3 14.043DESS STR BLV

TI-BASE

STR_BLV_NC NE 15.04315.343

50.043 52.043

50.500

TR_BLV_NC E 16.04316.343

50.043 52.043

50.600

RC4.1/4.8

14.044DESS STR BLV

TI-BASE

STR_BLV_RC NE 15.04415.344

50.044 52.044

50.500

STR_BLV_RC E 16.04416.344

50.044 52.044

50.600

SRA 14.098DESS STR BLV

TI-BASE

Zimmer ®Screw Vent

NP/3.5 14.017DESS ZIM SCV

TI-BASE

15.017ZIM_SCV_NP NE 15.217

15.317

50.017 52.017

50.50016.017

ZIM_SCV_NP E 16.21716.317

50.017 52.017

50.600

RP/4.5 14.018DESS ZIM SCV

TI-BASE

15.018ZIM_SCV_RP NE 15.218

15.318

50.018 52.018

50.50016.018

ZIM_SCV_RP E 16.21816.318

50.018 52.018

50.600

WP/5.7 14.019 DESS ZIM SCV TI-BASE

15.019ZIM_SCV_WP NE 15.219

15.319

50.019 52.019

50.50016.019

ZIM_SCV_WP E 16.21916.319

50.019 52.019

50.600

Internal Hex

8



Scan Body on TiBase

50.500 (NE) 50.600 (E)

15.069

16.069

15.046

16.009

15.010

16.010

15.045

16.045

15.048

16.048

15.043

16.043

15.343

16.343

15.044

16.04416.344

15.344

15.098

16.098

15.01715.21715.31716.01716.21716.31715.01815.21815.31816.01816.21816.31815.01915.21915.31916.01916.21916.319

synOCTA®

abutment

Screw Retained Abutment

STR_BLV_SRA NE 15.098 52.098

STR_BLV_SRA E 16.098 52.098

50.098

50.098


Astra techimplant

system™ EV

EV/3.6 14.059DESS AST EVO

TI-BASE

AST_EVO 3.6_NE 15.05915.359

50.059 52.059

50.500

AST_EVO 3.6_E 16.05916.359

50.059 52.059

50.600


TI-BASE

AST_EVO 4.2_NE 15.06015.360

50.060 52.060

50.500

AST_EVO 4.2_E 16.06016.360

50.060 52.060

50.600


TI-BASE

AST_EVO 4.8_NE 15.06115.361

50.061 52.061

50.500

AST_EVO 4.8_E 16.06116.361

50.061 52.061

50.600

Uniabutment® 14.058 DESS AST EVO TI-BASE

AST_EVO uniabutment_NE 15.058

50.058

52.058

9



Scan Body on TiBase

50.500 (NE) 50.600 (E)

Astra techosseospeedTM

NP/3.0 14.023DESS AST OSS

TI-BASE

AST_OSS_NP NE 15.02352.023

50.500

AST_OSS_NP E 16.02350.059 52.059

50.600

RP/3.5-4.0

14.024DESS AST OSS

TI-BASE

AST_OSS_RP NE 15.02415.324

50.024 52.024

50.500

AST_OSS_RP E 16.02416.324

50.024 52.024

50.600

WP/4.5-5.0

14.025DESS AST OSS

TI-BASE

AST_OSS_WP NE 15.02515.325

50.025 52.025

50.500

AST_OSS_WP E 16.02516.325

50.025 52.025

50.600

Uniabutment®

20º 14.036DESS AST OSS

TI-BASEAST_OSS_Uniabutment®_

20º NE 15.03650.036

52.036

Uniabutment®

45º 14.037 DESS AST OSSTI-BASE

AST_OSS_Uniabutment®_45º NE 15.037

50.037

52.037

Ankylos®

C/X

All platforms,

height GH 1,5

14.04814.049

DESS DEN ANKTI-BASE

DEN ANK NE GH1 15.05050.049 52.049

50.500

DEN ANK E GH1 16.05050.049 52.049

50.600

All platforms,

height GH 2,5

14.04814.049

DESS DEN ANKTI-BASE

DEN ANK NE GH2 15.25050.049 52.049

50.500

DEN ANK E GH2 16.25050.049 52.049

50.600


15.06915.359

16.05916.359

15.06015.360

16.06016.360

15.06115.361

16.06116.361

15.058

15.023

16.023

15.036

15.02415.234

15.037

16.02416.324

15.050

15.250

16.050

16.250

15.02515.325

16.02516.325

Platform Analog Type TiBase System Kit Scan Body

Biohorizons®

Internal

NP/3.5 14.087DESS BH INT

TI-BASE

BH_INTERNAL_NP NE 15.08752.087

50.500

BH_INTERNAL_NP E 16.08752.087

50.600

RP/4.5 14.088DESS BH INT

TI-BASE

BH_INTERNAL_RP NE 15.08852.088

50.500

BH_INTERNAL_RP E 16.08852.088

50.600

WP/5.7 14.089 DESS BH INT TI-BASE

BH_INTERNAL_WP NE 15.08952.089

50.500

BH_INTERNAL_WP E 16.08952.089

50.600

Biohorizons®

NP/3.7 14.020DESS BH EXT

TI-BASE

BH_INTERNAL_NP NE 15.05150.020 52.020

50.500

BH_INTERNAL_NP E 16.05150.020 52.020

50.600

RP/4.2 14.021DESS BH EXT

TI-BASE

BH_EXTERNAL_RP NE 15.05250.021 52.021

50.500

BH_EXTERNALL_RP E 16.05250.021 52.021

50.600

WP/5.2 14.022 DESS BH EXT TI-BASE

BH_EXTERNAL_WP NE 15.05350.022 52.022

50.500

BH_EXTERNAL_WP E 16.05350.022 52.022

50.600

MIS®

Seven

NP/3.7 14.056DESS MIS SEV

TI-BASE

MIS_SEV_NP_NE 15.05650.056 52.056

50.500

MIS_SEV_NP_E 16.05650.056 52.056

50.600

SP/4.2 14.095DESS MIS SEV

TI-BASE

15.095MIS_SEV_SP_NE 15.295

15.395

50.017 52.017

50.50016.095

MIS_SEV_SP_ E 16.29516.395

50.017 52.017

50.600

WP/5.2 14.096 DESS MIS SEV TI-BASE

15.096MIS_SEV_WP_NE 15.296

15.396

50.018 52.018

50.50016.096

MIS_SEV_WP_ E 16.29616.396

50.018 52.018

50.600

External Hex

Internal Hex

Internal Hex

non-engaging non-engaging 3Lab Scan Body

50.0XXIntra Oral Scan Body

52.0XX

Scan Body on TiBase

50.500 (NE) 50.600 (E)non-engaging non-engaging 3Lab Scan Body

50.0XXIntra Oral Scan Body

52.0XX

Scan Body on TiBase

50.500 (NE) 50.600 (E)

10



Scan Body on TiBase

50.500 (NE) 50.600 (E)


15.087

16.087

15.088

16.088

15.089

16.089

15.051

16.051

15.056

16.056

15.052

16.052

15.053

16.053

15.09615.29615.39616.0961629616.396

15.09515.29515.39516.0951629516.395

MegagenAnyRidge® 14.057

DESS MGN ANY TI-BASE

MGN ANY NE 15.05750.500

MGN ANY E 16.057 50.057

50.600

15.057

16.057

50.057

Multiunit4.8

14.085 MIS C1 MULTIUNIT WE 52.08515.085 15.085DESS MIS C1 TI-BASE


Friadent XIVE®

NP/3.4 14.038DESS DEN XIV

TI-BASE

DEN_XIV_NP NE 15.03850.038 52.038

50.500

DEN_XIV_NP E 16.03850.038 52.038

50.600

RP/3.8 14.039DESS DEN XIV

TI-BASE

DEN_XIV_RP NE 15.03950.039 52.039

50.500

DEN_XIV_RP E 16.03950.039 52.039

50.600

WP/4.5 14.040DESS DEN XIV

TI-BASE

DEN_XIV_WP NE 15.04050.040 52.040

50.500

DEN_XIV_WP E 16.04050.040 52.040

50.600

5.5 14.071 DESS DEN XIVTI-BASE

DEN_XIV_5.5 NE 15.07152.071

50.500

DEN_XIV_5.4 E 16.07152.071

50.600

11



Scan Body on TiBase

50.500 (NE) 50.600 (E)

MiniYellow

14.072DESS OSS TS

TI-BASE

OSS_TS MINI_NE 15.07215.372

50.072 52.072

50.500

OSS_TS MINI_E 16.07216.372

50.072 52.072

50.600

STDRegular

14.073 DESS OSS TS TI-BASE

OSS_TS STD_NE 15.073

15.373

50.073 52.073

50.500

OSS_TS STD_E 16.073

16.373

50.073 52.073

50.600

Hiossen

Dentium SuperlineTM

&Implantium

14.090 DESS DENTIUM TI-BASE

DENTIUM Ti base NE 15.09052.090

50.500

DENTIUM Ti base E 16.09052.090

50.600


15.038

16.038

15.039

15.040

16.039

15.07215.372

16.07216.372

15.373

16.07316.373

15.090

16.090

16.040

16.071

15.073

Conelog®

NP/3.3 14.074DESS CONELOG

TI-BASE

CONELOG NP NE 15.07452.074

50.500

CONELOG NP E 16.07452.074

50.600

RP/3.8 14.075DESS CONELOG

TI-BASE

CONELOG RP NE 15.07552.075

50.500

CONELOG RP E 16.07552.075

50.600

WP/5.0 14.076 DESS CONELOG TI-BASE

CONELOG WP NE 15.07652.076

50.500

CONELOG WP E 16.07652.076

50.600

15.075

16.075

15.074

16.074

15.076

16.076

15.071


Camlog®

3.3 14.064DESS CAMLOG

TI-BASE

CAM_3.3 NE 15.06452.064

50.500

CAM_3.3 E 16.06452.064

50.600


TI-BASE

15.065CAM_3.8 NE 15.265

15.365

50.065 52.065

50.50016.065

CAM_3.8 E 16.26516.365

50.065 52.065

50.600


TI-BASE

15.066CAM_4.3 NE 15.266

15.366

50.066 52.066

50.50016.066

CAM_4.3 E 16.26616.366

50.066 52.066

50.600

5.0 14.067 DESS CAMLOG TI-BASE

CAM_5.0 NE 15.06752.067

50.500

CAM_5.03 E 16.06752.067

50.600

12



Scan Body on TiBase

50.500 (NE) 50.600 (E)


15.06515.26515.36516.0651626516.365

15.067

16.057

15.06615.26615.36616.0661626616.366

15.064

16.064

MIS®

C1 internal

NP 14.081DESS MIS C1

TI-BASE

MIS C1 NP NE 15.08150.500

MIS C1 NP E 16.08152.081

50.600

SP 14.082DESS MIS C1

TI-BASE

MIS C1 SP NE 15.08252.082

50.500

MIS C1 SP E 16.08252.082

50.600

WP 14.083DESS MIS C1

TI-BASE

MIS C1 WP NE 15.08352.083

50.500

MIS C1 WP E 16.08352.083

50.600

Multiunit4.8

14.085 DESS MIS C1 TI-BASE

MIS C1 MULTIUNIT WE 15.085 52.085

MIS® V3

NP 14.084DESS MIS V3

TI-BASE

MIS V3 NP NE 15.08452.084

50.500

MIS V3 NP E 16.08452.084

50.600

SP 14.082DESS MIS V3

TI-BASE

MIS V3 SP NE 15.08252.083

50.500

MIS V3 SP E 16.08252.082

50.600

Multiunit4.8

14.085 DESS MIS C1 TI-BASE

MIS V3 MULTIUNIT 4.8 15.085 52.085

15.081

16.081

15.082

16.082

15.083

16.083

15.083

15.084

16.084

15.082

16.082

15.085


NP 14.041DESS NOB ACTANGLE Base

NOB_ACT_NP NE 36.04150.041 52.041

50.500

NOB_ACT_NP E 37.04150.041 52.041

50.600

RP 14.042 DESS NOB ACTANGLE Base

NOB_ACT_RP NE 36.04250.042 52.042

50.500

NOB_ACT_RP E 37.04250.042 52.042


NP 14.004DESS NOB RPL

ANGLE Base

NOB_RPL_NP NE 36.00450.004 52.004

50.500

NOB_RPL_NP E 37.00450.004 52.004

50.600

RP 14.005DESS NOB RPL

NOB_RPL_RP NE 36.00550.005 52.005

50.500

NOB_RPL_RP E 37.00550.005 52.005

50.600

WP 14.006 DESS NOB RPL ANGLE Base

NOB_RPL_WP NE 36.00650.006 52.006

50.500

NOB_RPL_WP E 37.00650.006 52.006

50.600

NobelBrånemark®

NP 14.001DESS NOB BRK

ANGLE Base

NOB_BRK_NP NE 36.00150.001 52.001

50.500

NOB_BRK_NP E 37.00150.001 52.001

50.600

RP 14.002DESS NOB BRK

ANGLE Base

NOB_BRK_RP NE 36.00250.002 52.002

50.500

NOB_BRK_RP E 37.00250.002 52.002

50.600

WP 14.003 DESS NOB BRK ANGLE Base

NOB_BRK_WP NE 36.00350.003 52.003

50.500

NOB_BRK_WP E 37.00350.003 52.003

50.600

3iOsseotite®

NP/3.4 14.011DESS 3I OSSANGLE Base

3I_OSS_NP NE 36.01150.011 52.011

50.500

3I_OSS_NP E 37.01150.011 52.011

50.600

RP/4.1 14.012DESS 3I OSS ANGLE Base

3I_OSS_RP NE 36.01250.012 52.012

50.500

3I_OSS_RP E 37.01250.012 52.012

50.600

WP/5.0 14.013 DESS 3I OSSANGLE Base

3I_OSS_WP NE 36.01350.013 52.013

50.500

3I_OSS_WP E 37.01350.013 52.013

50.600

13



Scan Body on TiBase

50.500 (NE) 50.600 (E)

50.600


36.041

37.041

36.042

37.042

36.004

37.004

36.005

37.005

36.006

37.006

36.001

37.001

36.002

37.002

36.003

37.003

36.011

37.011

36.012

37.012

36.013

37.013

NobelActive®


External Hex

ANGLE Base


3iCertain®

NP/3.4 14.014DESS 3I CER ANGLE Base

3I_CER_NP NE 36.01450.014 52.014

50.500

3I_CER_NP E 37.01450.014 52.014

50.600

RP/4.1 14.015DESS 3I CER ANGLE Base

3I_CER_RP NE 36.01550.015 52.015

50.500

3I_CER_RP E 37.01550.015 52.015

50.600

WP/5.0 14.016 DESS 3I CERANGLE Base

3I_CER_WP NE 36.016 50.016 52.016

50.500

3I_CER_NP E 37.01650.016 52.016

50.600

Straumann®

Tissue Level

RN/4.1-4.8 14.009DESS STR STLV

ANGLE Base

STR STLV RN NE 36.04650.009 52.009

STR STLV RN E 37.00950.009 52.009

WN/4.8- 6.5 14.045 DESS STR STLV ANGLE Base

STR STLV WP NE 36.04550.045 52.045

STR STLV WP E 37.04550.045 52.045

Straumann®

Bone Level

NC/3.3 14.043DESS STR BLV ANGLE Base

STR_BLV_NC NE 36.04350.043 52.043

50.500

TR_BLV_NC E 37.04350.043 52.043

50.600

RC/4.1 14.044 DESS STR BLV ANGLE Base

STR_BLV_RC NE 36.04450.044 52.044

50.500

TR_BLV_RC E 37.04450.044 52.044

50.600

Zimmer Screw-Vent®

NP/3.5 14.017DESS ZIM SCV ANGLE Base

ZIM_SCV_NP NE 36.01750.017 52.017

50.500

ZIM_SCV_NP E 37.01750.017 52.017

50.600

RP/4.5 14.018DESS ZIM SCV ANGLE Base

ZIM_SCV_RP NE 36.01850.018 52.018

50.500

ZIM_SCV_RP E 37.01850.018 52.018

50.600

WP/5.7 14.019 DESS ZIM SCV ANGLE Base

ZIM_SCV_WP NE 36.01950.019 52.019

50.500

ZIM_SCV_WP E 37.01950.019 52.019

50.600

14



Scan Body on TiBase

50.500 (NE) 50.600 (E)

36.014

37.014

36.015

37.015

36.016

37.016

36.046

37.009

36.045

37.045

36.043

37.043

36.044

37.044

36.017

37.017

36.018

37.018

36.019

37.019



Astra techimplant

system™ EV

EV/3.6 14.059DESS AST EVO ANGLE Base

AST_EVO 3.6_NE 36.05950.059 52.059

50.500

AST_EVO 3.6_E 37.05950.059 52.059

50.600

EV/4.2 14.060DESS AST EVO ANGLE Base

AST_EVO 4.2_NE 36.06050.060 52.060

50.500

AST_EVO 4.2_E 37.06050.060 52.060

50.600

EV/4.8 14.061 DESS AST EVO ANGLE Base

AST_EVO 4.8_NE 36.06150.061 52.061

50.500

AST_EVO 4.8_E 37.06150.061 52.061

50.600

Astra techosseospeedTM

RP 14.024DESS AST OSSANGLE Base

AST_OSS_RP NE 36.02450.024 52.024

50.500

AST_OSS_RP E 37.02450.024 52.024

50.600

WP 14.025 DESS AST OSSANGLE Base

AST_OSS_WP NE 36.02550.025 52.025

50.500

AST_OSS_WP E 37.02550.025 52.025

50.600

DESS OSSANGLE Base

DEN_XIV_RP NE 36.03950.072 52.072

50.500

DEN_XIV_RP E 37.03950.072 52.072

50.600

DESS OSSANGLE Base

DEN_XIV_WP NE 36.04050.073 52.073

50.500

DEN_XIV_WP E 37.04050.073 52.073

50.600

Ankylos®

C/X

All platforms,

height GH 1,5

14.04814.049

DESS DEN ANKANGLE Base

DEN ANK NE GH1 36.05050.049 52.049

50.500

DEN ANK E GH1 37.05050.049 52.049

50.600

All platforms,

height GH 2,5

14.04814.049

DESS DEN ANKANGLE Base

DEN ANK NE GH2 36.25050.049 52.049

50.500

DEN ANK E GH2 37.25050.049 52.049

50.600

MultiUnitRP 14.007

DESS MULTI-UNIT®

ANGLE BASEMulti_Unit_RP NE 36.007

50.00752.007


ANGLE BASEMulti_Unit_RP NE 36.054 50.047

52.047

15



Scan Body on TiBase

50.500 (NE) 50.600 (E)

36.059

37.059

36.060

37.060

36.061

37.061

36.024

37.024

36.025

37.025

36.072

37.072

36.073

37.073

36.050

37.050

36.250

37.250

36.007

36.054


HiossenOsstem® TS

TS MiniYellow

14.072

TS Standard Regular 14.073


Friadent XIVE®

NP 14.038DESS DEN XIVANGLE Base

DEN_XIV_NP NE 36.03850.038 52.038

50.500

DEN_XIV_NP E 37.03850.038 52.038

50.600

RP 14.039DESS DEN XIVANGLE Base

DEN_XIV_RP NE 36.03950.039 52.039

50.500

DEN_XIV_RP E 37.03950.039 52.039

50.600

WP 14.040 DESS DEN XIVANGLE Base

DEN_XIV_WP NE 36.04050.040 52.040

50.500

DEN_XIV_WP E 37.04050.040 52.040

50.600

16



Scan Body on TiBase

50.500 (NE) 50.600 (E)

36.038

37.038

36.039

37.039

36.040

37.040



Straumann®

Bone Level

NC 14.043 DESS STR BLV PRE-MILLED TI STR_BLV_NC E 61.043 ø10mm

62.043 ø14mm

50.043 52.043

RC 14.044 DESS STR BLV PRE-MILLED TI STR_BLV_RC E50.044 52.044

Zimmer Screw-Vent®

NP 14.017 DESS ZIM SCV PRE-MILLED TI ZIM_SCV_NP E50.017 52.017

RP 14.018 DESS ZIM SCV PRE-MILLED TI ZIM_SCV_RP E 61.01850.018 52.018

WP 14.019 DESS ZIM SCV PRE-MILLED TI ZIM_SCV_WP E 61.01950.019 52.019

Astra techimplant

system™ EV

EV/3.6 14.059 DESS AST EVO PRE-MILLED TI AST_EVO 3.6_E 61.05950.059 52.059



Astra techimplant

Osseospeed™

14.024 DESS AST OSS PRE-MILLED TI AST_OSS_RP E 61.02450.024 52.024

WP 14.025 DESS AST OSS PRE-MILLED TI AST_OSS_WP E 61.02550.025 52.025

Friadent XIVE®

NP 14.038 DESS DEN XIV PRE-MILLED TI DEN_XIV_NP E 61.03850.038 52.038

RP 14.039 DESS DEN XIV PRE-MILLED TI DEN_XIV_RP E 61.03950.039 52.039

WP 14.040 DESS DEN XIV PRE-MILLED TI DEN_XIV_WP E 61.04050.040 52.040

Ankylos® C/XAll

platforms,height GH 2,5

14.04814.049

DESS DEN ANK PRE-MILLED TI DEN ANK E GH2 61.25050.049 52.049

MiniYellow

14.072 OSS_TS MINI_E 61.07250.072 52.072

STDRegular

14.073 DESS OSS TS PRE-MILLED TI OSS_TS STD_E 61.07250.073 52.073

17

Hiossen

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)


DESS OSS TS PRE-MILLED TI

61.044 ø10mm

62.044 ø14mm

61.017 ø10mm

62.017 ø14mm

RP


NobelActive®

3.0 14.068NOB_ACT_3.0 E 61.068

52.068

NP 14.041 61.041ø10mmNOB_ACT_NP E 62.041ø14mm

50.041 52.041

RP 14.042 61.042ø10mm

NOB_ACT_RP E 62.042ø14mm

50.042 52.042

WP 14.069 DESS NOB ACT PRE-MILLED TINOB_ACT_WP E 61.069

52.069


NP 14.004 NOB_RPL_NP E 61.00450.004 52.004

RP 14.005 NOB_RPL_RP E 61.00550.005 52.005

WP 14.006 NOB_RPL_WP E 61.00650.006 52.006

6.0 14.097 DESS NOB RPL PRE-MILLED TI NOB_RPL_ 6.0 61.09752.097

NobelBrånemark®

NP 14.001 NOB_BRK_NP E 61.00150.001 52.001

RP 14.002 NOB_BRK_RP E 61.00250.002 52.002

WP 14.003 DESS NOB BRK PRE-MILLED TI NOB_BRK_WP E 61.00350.003 52.003

3iOsseotite®

NP 14.011 3I_OSS_NP E 61.01150.011 52.011

RP 14.012 3I_OSS_RP E 61.01250.012 52.012

WP 14.013DESS 3I OSS PRE-MILLED TI

3I_OSS_WP E 61.01350.013 52.013

3iCertain®

NP 14.014 3I_CER_NP E 61.01450.014 52.014

RP 14.015 3I_CER_RP E 61.01550.015 52.015

WP 14.016 DESS 3I CER PRE-MILLED TI 3I_CER_WP E 61.01650.016 52.016

Straumann®

Tissue Level

NNC 14.070 DESS STR STLV PRE-MILLED TI NOB_ACT_WP E 61.07052.069

RN 14.009 DESS STR STLV PRE-MILLED TI STR STLV RN E 61.009 ø10mm

62.009 ø14mm

50.009 52.009

WN 14.045 DESS STR STLV PRE-MILLED TI STR STLV WN E 61.045 ø10mm

62.045 ø14mm

50.045 52.045

Section 3 - Category = DESS Pre-milled Ti - For Custom Titanium Abutments 18

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)


External Hex

DESS 3I CER PRE-MILLED TI

DESS 3I CER PRE-MILLED TI

DESS 3I OSS PRE-MILLED TI

DESS 3I OSS PRE-MILLED TI

DESS NOB BRK PRE-MILLED TI

DESS NOB BRK PRE-MILLED TI

DESS NOB RPL PRE-MILLED TI



DESS NOB ACT PRE-MILLED TI




Camlog®

3.3 14.064 DESS CAMLOG PRE-MILLED TI CAM_3.3 E 61.06452.064

3.8 14.065 DESS CAMLOG PRE-MILLED TI CAM_3.8 E 61.06550.065 52.065

4.3 14.066 DESS CAMLOG PRE-MILLED TI CAM_4.3 E 61.06650.066 52.066

5.0 14.067 DESS CAMLOG PRE-MILLED TI CAM_5.0 E 61.06752.067

Conelog®

NP 14.074 DESS CONELOG PRE-MILLED TICONELOG NP E 61.074

52.074

RP 14.075 DESS CONELOG PRE-MILLED TICONELOG RP E 61.075

52.075

WP 14.076 DESS CONELOG PRE-MILLED TI CONELOG WP E 61.07652.076

Biohorizns®

External Hex

RP/4.2 14.021 DESS BH EXT TI-BASE BH_EXTERNAL_RP E 61.02150.021 52.021

WP/5.2 14.022 DESS BH EXT TI-BASE BH_EXTERNAL_WP E 61.02250.022 52.022

MIS®

Seven

SP 14.095 DESS MIS SEV TI-BASE MIS_SEV_SP_E 61.01750.017 52.017

WP 14.096 DESS MIS SEV TI-BASE MIS_SEV_WP_E 61.01850.018 52.018

MegagenAnyRidge® 14.057 DESS MGN ANY PRE-MILLED TI MGN ANY E 61.057

50.057

Dentium SuperlineTM &Implantium

RP 14.090 DESS DENTIUM TI-BASE DENTIUM Ti base E 61.09052.090

19

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)



Camlog®

3.3 14.064 DESS CAMLOG PRE-MILLED CoCr CAM_3.3 E 71.06452.064

3.8 14.065 DESS CAMLOG PRE-MILLED CoCrCAM_3.8 E 71.065

50.065 52.065


50.066 52.066


52.067

Conelog®

NP 14.074 DESS CONELOG PRE-MILLED CoCr CONELOG NP E 71.07452.074

RP 14.075DESS CONELOG PRE-MILLED CoCr

CONELOG RP E 71.07552.075

WP 14.076 DESS CONELOG PRE-MILLED CoCrCONELOG WP E 71.076

52.076

Biohorizons®

External Hex

RP/4.2 14.021 DESS BH EXT PRE-MILLED CoCr BH_EXTERNAL_RP E 671.02150.021 52.021

WP/5.2 14.022 DESS BH EXT PRE-MILLED CoCrBH_EXTERNAL_WP E 71.022

50.022 52.022

MIS®

Seven

SP 14.095DESS MIS SEV PRE-MILLED CoCr MIS_SEV_SP_E 71.017

50.017 52.017

WP 14.096 DESS MIS SEV PRE-MILLED CoCrMIS_SEV_WP_E 71.018

50.018 52.018

MegagenAnyRidge® 14.057

DESS MGN ANY PRE-MILLED CoCrMGN ANY E 71.057

50.057

Dentium SuperlineTM &Implantium

RP 14.090 DESS DENTIUM PRE-MILLED CoCrDENTIUM E 71.090

52.090

20



Scan Body on TiBase

50.500 (NE) 50.600 (E)non-engaging engaging Lab Scan Body50.0XX


Scan Body on TiBase



Scan Body on TiBase

50.500 (NE) 50.600 (E)

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)



3.0 14.068 DESS NOB ACT PRE-MILLED CoCrNOB_ACT_3.0 E 71.068

52.068

NP 14.041 DESS NOB ACT PRE-MILLED CoCr NOB_ACT_NP E 71.041 50.041 52.041

RP 14.042 DESS NOB ACT PRE-MILLED CoCrNOB_ACT_RP E 71.042 50.042 52.042

WP 14.069 DESS NOB ACT PRE-MILLED CoCrNOB_ACT_WP N 71.069

52.069


NP 14.004 DESS NOB RPL PRE-MILLED CoCrNOB_RPL_NP E 71.004

50.004 52.004

RP 14.005 DESS NOB RPL PRE-MILLED CoCrNOB_RPL_RP E 71.005

50.005 52.005

WP 14.006 DESS NOB RPL PRE-MILLED CoCrNOB_RPL_WP E 71.006

50.006 52.006

6.0 14.097 DESS NOB RPL PRE-MILLED CoCrNOB_RPL_NP 6.0 71.097

52.097

NobelBrånemark®

NP 14.001 DESS NOB BRK PRE-MILLED CoCrNOB_BRK_NP E 71.001

50.001 52.001

RP 14.002DESS NOB BRK PRE-MILLED CoCr

NOB_BRK_RP E 71.00250.002 52.002

WP 14.003 DESS NOB BRK PRE-MILLED CoCrNOB_BRK_WP E 71.003

50.003 52.003

3iOsseotite®

NP 14.011 DESS 3I OSS PRE-MILLED CoCr 3I_OSS_NP E 71.01150.011 52.011

RP 14.012 DESS 3I OSS PRE-MILLED CoCr3I_OSS_RP E 71.012

50.012 52.012

WP 14.013 DESS 3I OSS PRE-MILLED CoCr3I_OSS_WP E 71.013

50.013 52.013

3iCertain®

NP 14.014 DESS 3I CER PRE-MILLED CoCr 3I_CER_NP E 71.01450.014 52.014

RP 14.015 DESS 3I CER PRE-MILLED CoCr3I_CER_RP E 71.015

50.015 52.015

WP 14.016 DESS 3I CER PRE-MILLED CoCr3I_CER_WP E 71.016

50.016 52.016

Straumann®

Tissue Level

RN 14.009DESS STR STLV PRE-MILLED CoCr

STR STLV RN E 71.009 50.009 52.009

WN 14.045 DESS STR STLV PRE-MILLED CoCrSTR STLV WN E 71.045 50.045 52.045

21

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)

External Hex

NobelActive®




Straumann®

Bone Level

NC 14.043DESS STR BLV

PRE-MILLED CoCr STR_BLV_NC E 71.04350.043 52.043

RC 14.044 DESS STR BLV PRE-MILLED CoCr

STR_BLV_RC E 71.04450.044 52.044

Zimmer Screw-Vent®

NP 14.017DESS ZIM SCV

PRE-MILLED CoCr ZIM_SCV_NP E 71.01750.017 52.017

RP 14.018 DESS ZIM SCV PRE-MILLED CoCr

ZIM_SCV_RP E 71.01850.018 52.018

WP 14.019 DESS ZIM SCV PRE-MILLED CoCr

ZIM_SCV_WP E 71.01950.019 52.019

Astra techimplant

system™ EV


PRE-MILLED CoCr AST_EVO 3.6_E 71.05950.059 52.059

EV/4.2 14.060 DESS AST EVO PRE-MILLED CoCr

AST_EVO 4.2_E 71.06050.060 52.060

EV/4.8 14.061 DESS AST EVO PRE-MILLED CoCr

AST_EVO 4.8_E 71.06150.061 52.061

Astra techimplant

Osseospeed™

RP 14.024DESS AST OSS

PRE-MILLED CoCr AST_OSS_RP E 71.02450.024 52.024

WP 14.025 DESS AST OSSPRE-MILLED CoCr

AST_OSS_WP E 71.02550.025 52.025

Friadent XIVE®

NP 14.038DESS DEN XIV

PRE-MILLED CoCr DEN_XIV_NP E 71.03850.038 52.038

RP 14.039 DESS DEN XIVPRE-MILLED CoCr

DEN_XIV_RP E 71.03950.039 52.039

WP 14.040 DESS DEN XIVPRE-MILLED CoCr

DEN_XIV_WP E 71.04050.040 52.040

Ankylos® C/XAll

platforms,height GH 2,5

14.04814.049

DESS DEN ANKPRE-MILLED CoCr

DEN ANK E GH2 71.25050.049 52.049

MiniYellow

14.072DESS OSS TS

PRE-MILLED CoCr OSS_TS MINI_E 71.07250.072 52.072

STDRegular

14.073 DESS OSS TS PRE-MILLED CoCr

OSS_TS STD_E 71.07250.073 52.073

22

Hiossen

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)



Multiunit onNobel ActiveTM

NP 14.041DESS NOB ACT

MULT PLUS INTER

NP 15.007+40.007/1 (1,5mm)NP 15.007+40.007/2 (2,5mm)NP 15.007+40.007/3 (3,5mm)

50.041

52.041

RP 14.042DESS NOB ACT

MULT PLUS INTER

RP 15.007+40.008/1 (1,5mm)RP 15.007+40.008/2 (2,5mm)RP 15.007+40.008/3 (3,5mm)RP 15.007+40.008/4 (4,5mm)

50.042

52.042

Multiunit on Nobel Replace®

NP 14.004DESS NOB RPL

MULT PLUS INTER

NP 15.007+40.004/1 (1mm)NP 15.007+40.004/2 (2mm)NP 15.007+40.004/3 (3mm)

50.004

52.004

RP 14.005DESS NOB RPL

MULT PLUS INTER

RP 15.007+40.005/2 (2mm)RP 15.007+40.005/3 (3mm)RP 15.007+40.005/4 (4mm)RP 15.007+40.005/5 (5mm)

50.005

52.005

WP 14.063DESS NOB RPL

MULT PLUS INTER

WP 15.054+40.006/1 (1mm)WP 15.054+40.006/2 (2mm)WP 15.054+40.006/3 (3mm)

50.006

52.006

Multiunit onBrånemarkSystem®


MULT PLUS INTER

NP 15.007+40.001/1 (1mm)NP 15.007+40.001/2 (2mm)NP 15.007+40.001/3 (3mm)

50.001

52.001


MULT PLUS INTER

RP 15.007+40.002/2 (2mm)RP 15.007+40.002/3 (3mm)RP 15.007+40.002/4 (4mm)RP 15.007+40.002/5 (5mm)

50.002

52.002

WP 14.003DESS NOB BRK

MULT PLUS INTER

WP 15.054+40.003/1 (1mm)WP 15.054+40.003/2 (2mm)WP 15.054+40.003/3 (3mm)

50.003

52.003

Multiunit on3i Osseotite® NP 14.011

DESS 3i OSS MULT PLUS

INTER

NP 15.007+40.009/1 (1mm)NP 15.007+40.009/2 (2mm)NP 15.007+40.009/3 (3mm)

50.011

52.011

for Straumann Bone Level

Bone LevelTM

NP 14.043DESS STR BLV

MULT PLUS INTER

NP 15.007+40.043/1 (1,5mm)NP 15.007+40.043/2 (2,5mm)NP 15.007+40.043/3 (3,5mm)

50.043

52.043

RP 14.044DESS STR BLV

MULT PLUS INTER

RP 15.007+40.044/1 (1,5mm)RP 15.007+40.044/2 (2,5mm)RP 15.007+40.044/3 (3,5mm)RP 15.007+40.044/4 (4,5mm)

50.044

52.044

MultiUnit onZimmer

Screw-Vent®

NP 14.017DESS ZIM SCV

MULT PLUS INTER

NP 15.007+40.019/1 (1mm)NP 15.007+40.019/2 (2mm)NP 15.007+40.019/3 (3mm)NP 15.007+40.019/4 (4mm)

50.017

52.017

RP 14.018DESS ZIM SCV

MULT PLUS INTER

RP 15.007+40.020/1 (1mm)RP 15.007+40.020/2 (2mm)RP 15.007+40.020/3 (3mm)

50.018

52.018

23

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)

Internal Hex

External Hex


Section 5 - Category = DESS Multiunit & Uniabutment Plus TiBase

MultiUnit on


Uniabutment® on Astra TechTM

Implant SystemTM

EV

RPUniabutment®

14.059DESS AST EVO UNIABUT PLUS

INTER

EV3.6 15.058+40.059/1 (1mm)EV3.6 15.058+40.059/2 (2mm)EV3.6 15.058+40.059/3 (3mm)EV3.6 15.058+40.059/5 (5mm)

50.059

52.059

EV 4.2Uniabutment®


INTER

EV4.2 15.058+40.060/1 (1mm)EV4.2 15.058+40.060/2 (2mm)EV4.2 15.058+40.060/3 (3mm)

50.060

52.060

EV 4.8Uniabutment®


INTER

EV4.8 15.058+40.061/1 (1mm)EV4.8 15.058+40.061/2 (2mm)EV4.8 15.058+40.061/3 (3mm)EV4.8 15.058+40.061/5 (5mm)

50.061

52.061


Osseospeed®

RPUniabutment®

20º14.024

DESS AST EVO UNIABUT PLUS

INTER

RP 20 15.036+40.013/0 (0,5mm)RP 20 15.036+40.013/1 (1mm)RP 20 15.036+40.013/2 (2mm)RP 20 15.036+40.013/4 (4mm)RP 20 15.036+40.013/6 (6mm)

50.024

52.024

WPUniabutment®

20º14.025


INTER

WP 20 15.036+40.015/0 (0,5mm)WP 20 15.036+40.015/1 (1mm)WP 20 15.036+40.015/2 (2mm)WP 20 15.036+40.015/4 (4mm)WP 20 15.036+40.015/6 (6mm)

50.025

52.025

RPUniabutment®

45º14.024


INTER

RP 45 15.037+40.014/0 (0,5mm)RP 45 15.037+40.014/1 (1mm)RP 45 15.037+40.014/2 (2mm)RP 45 15.037+40.014/4 (4mm)RP 45 15.037+40.014/6 (6mm)

50.024

52.024

WPUniabutment®

45º14.025


INTER

WP 45 15.037+40.016/0 (0,5mm)WP 45 15.037+40.016/1 (1mm)WP 45 15.037+40.016/2 (2mm)WP 45 15.037+40.016/4 (4mm)WP 45 15.037+40.016/6 (6mm)

50.025

52.025

24

Lab Scan Body50.0XX


Scan Body on TiBase

50.500 (NE) 50.600 (E)



NP 14.041DESS NOB ACT MULTI-UNIT®

DIRECT

NP 40.007/1 (1,5mm)NP 40.007/2 (2,5mm)NP 40.007/3 (3,5mm)

50.041

52.041

RP 14.042DESS NOB ACT MULTI-UNIT®

DIRECT

RP 40.008/1 (1,5mm)RP 40.008/2 (2,5mm)RP 40.008/3 (3,5mm)RP 40.008/4 (4,5mm)

50.042

52.042

Multiunit on Nobel Replace®

NP 14.004DESS NOB RPL MULTI-UNIT®

DIRECT

NP 40.004/1 (1mm)NP 40.004/2 (2mm)NP 40.004/3 (3mm)

50.004

52.004

RP 14.005DESS NOB RPL MULTI-UNIT®

DIRECT

RP 40.005/2 (2mm)RP 40.005/3 (3mm)RP 40.005/4 (4mm)RP 40.005/5 (5mm)

50.005

52.005

WP 14.0063DESS NOB RPL MULTI-UNIT®

DIRECT

WP 40.006/1 (1mm)WP 40.006/2 (2mm)WP 40.006/3 (3mm)

50.006

52.006

Multiunit onBrånemarkSystem®


MULTI-UNIT®

DIRECT

NP 40.001/1 (1mm)NP 40.001/2 (2mm)NP 40.001/3 (3mm)

50.001

52.001


MULTI-UNIT®

DIRECT

RP 40.002/2 (2mm)RP 40.002/3 (3mm)RP 40.002/4 (4mm)RP 40.002/5 (5mm)

50.002

52.002

WP 14.003DESS NOB BRK

MULTI-UNIT®

DIRECT

WP 40.003/1 (1mm)WP 40.003/2 (2mm)WP 40.003/3 (3mm)

50.003

52.003

Multiunit on3i Osseotite® NP 14.011

DESS 3i OSS MULTI-UNIT®

DIRECT

NP 40.009/1 (1mm)NP 40.009/2 (2mm)NP 40.009/3 (3mm)

50.011

52.011

MultiUnit onBone LevelTM

NP 14.043DESS STR BLV MULTI-UNIT®

DIRECT

NP 40.043/1 (1,5mm)NP 40.043/2 (2,5mm)NP 40.043/3 (3,5mm)

50.043

52.043

RP 14.044DESS STR BLV MULTI-UNIT®

DIRECT

RP 40.044/1 (1,5mm)RP 40.044/2 (2,5mm)RP 40.044/3 (3,5mm)RP 40.044/4 (4,5mm)

50.044

52.044

MultiUnit onZimmer

Screw-Vent®

NP 14.017DESS ZIM SCV MULTI-UNIT®

DIRECT

NP 40.019/1 (1mm)NP 40.019/2 (2mm)NP 40.019/3 (3mm)NP 40.019/4 (4mm)

50.017

52.017

RP 14.018DESS ZIM SCV MULTI-UNIT®

DIRECT

RP 40.020/1 (1mm)RP 40.020/2 (2mm)RP 40.020/3 (3mm)

50.018

52.018

25

Scan Bodyfor desktop scanning50.0XX

Scan Bodyfor intra-oral scanning52.0XX

Scan Bodyon Ti base50.500 50.600

non-engaging non-engaging Scan Bodyfor desktop scanning50.0XX

Scan Bodyfor intra-oral scanning52.0XX

Scan Body

on Ti base50.500 50.600

non-engaging non-engaging



Scan Body on TiBase



Scan Body on TiBase



Scan Body on TiBase

50.500 (NE) 50.600 (E)



Scan Body on TiBase

50.500 (NE) 50.600 (E)

External Hex

Internal Hex

Multiunit on

Nobel Active®





Implant SystemTM

EV

RPUniabutment®

14.059DESS AST EVO DIRECT

EV3.6 40.059/1 (1mm)EV3.6 40.059/2 (2mm)EV3.6 40.059/3 (3mm)EV3.6 40.059/5 (5mm)

50.059

52.059

EV 4.2Uniabutment®

14.060DESS AST EVO EV4.2 40.060/1 (1mm)

EV4.2 40.060/2 (2mm)EV4.2 40.060/3 (3mm)

50.060

52.060

EV 4.8Uniabutment®

14.061DESS AST EVO EV4.8 40.061/1 (1mm)

EV4.8 40.061/2 (2mm)EV4.8 40.061/3 (3mm)EV4.8 40.061/5 (5mm)

50.061

52.061


Osseospeed®

RPUniabutment®

20º14.024

DESS AST EVO RP 20 40.013/0 (0,5mm)

RP 20 40.013/1 (1mm)RP 20 40.013/2 (2mm)RP 20 40.013/4 (4mm)RP 20 40.013/6 (6mm)

50.024

52.024

WPUniabutment®

20º14.025

DESS AST EVO WP 20 40.015/0 (0,5mm)WP 20 40.015/1 (1mm)WP 20 40.015/2 (2mm)WP 20 40.015/4 (4mm)WP 20 40.015/6 (6mm)

50.025

52.025

RPUniabutment®

45º14.024

DESS AST EVO RP 45 40.014/0 (0,5mm)RP 45 40.014/1 (1mm)RP 45 40.014/2 (2mm)RP 45 40.014/4 (4mm)RP 45 40.014/6 (6mm)

50.024

52.024

WPUniabutment®

45º14.025

DESS AST EVO WP 45 40.016/0 (0,5mm)WP 45 40.016/1 (1mm)WP 45 40.016/2 (2mm)WP 45 40.016/4 (4mm)WP 45 40.016/6 (6mm)

50.025

52.025

26



Scan Body on TiBase

50.500 (NE) 50.600 (E)


DIRECT

DIRECT

DIRECT

DIRECT

DIRECT

DIRECT


Multiunit

RP 14.007 DESS MULTUNIT DIRECT Multi-unit50.007

52.007


WP 14.047 DESS MULTIUNIT DIRECT Multi-unit

50.047

52.047


14.01050.010

52.010


14.046 50.048

52.048

Straumann® Soft Tissue Level with synOcta® Abutment

RN on synOcta®

WN on synOcta®

DESS STR SYN DIRECT

DESS STR SYN DIRECT

(Bars and bridges)

(Bars and bridges)

STR SYN RN 51.010

STR SYN WN 51.048


14.03650.036

52.036


14.037 50.037

52.037

UniAbutment® OnAstra TechOsseospeed

UniAbutment®20° DESS AST UNIABUTMENT® DIRECT 20

40 UniAbutment®45° DESS AST UNIABUTMENT® DIRECT

14.058 50.058

52.058

Astra Tech ™ Implant System

EV

EVUniabutment

UniAbutment® DESS AST UNIABUTMENT® DIRECT

27

THIS LIBRARY IS FOR MAKING A BAR WITHOUT TIBASES WHICH WILL BE PLACED ONTO THE TOP OF THE FOLLOWING MULTIUNITS FROM DESS (ALL OF THE MULTIUNIT ABUTMENTS ARE NOBEL CONNECTION) and MUA's from NOBEL, BIOHORIZONS, NEODENT, 3i, HIOSSEN, MEGAGEN, ASTRA EV MULTIBASE. FOR ZIMMER and Implant Direct PLEASE USE THE DESS MULTIUNIT FOR ZIMMER. WP is only used on Branemark 5.0/WP MUA's.

SRA SRA14.09852.098

SRA DESS STR BLV SRA DIRECT 50.098

ISO 9001ISO 13485

All DESS products are manufactured according to ISO 9001:2015 and ISO 13485:2016 with CE marking for all products Class IIbAll DESS® AURUMBase® screws and screwdrivers are based on the standard ISO 10664

3i® and 3i Certain®, Miniplant®, MicroMiniplant™ and Osseotite® are registered trademarks of 3i Implant Innovations, USAASTRA TECH™, OsseoSpeed™, ANKYLOS® C/X, XiVE®, FRIADENT®, ASTRATECH implant system™ EV and UniAbutment®

are registered trademarks of DENTSPLY SIRONA ImplantsBioHorizons® is a registered trademark of BioHorizons, INC.

Brånemark System®, NobelReplace® and Replace Select™, NobelActive™, NobelReplace® CC, NobelSpeedy™ and Multi-unit® are registered trademarks of Nobel Biocare AB, Sweden

ITI®, Straumann® and synOcta® are registered trademarks of Straumann Holding AG, SwitzerlandMIS® is a registered trademark of MIS Implant Technologies Ltd.

Zimmer Screw-Vent® and SwissPlus® are registered trademarks of Zimmer Dental INC, USADyna® is a registered trademark of Dyna Dental Engineering BV

Locator® is a registered trademark of ZEST IP Holdings Camlog® and Conelog® are registered trademarks of CAMLOG Biotechnologies AG

Megagen® is a registered trademark of MEGAGEN IMPLANT CO. LTDTORX® is a trademark of ACUMENT INTELLECTUAL PROPERTIES, LLCBego Semados® is a registered trademark of BEGO GmbH & Co. KG

Anthogyr® is a registered trademark of Anthogyr SASMedentis ICX® is a registered trademark of medentis medical GmbH

Osstem® is a registered trademark of OSSTEM IMPLANT CO. LTDDentium® is a trademark of Dentium Co. Ltd.GOBALD® is a trademark of Global D SASU.

Biotech Kontact® is a trademark Biotech Dental SAS.BTI® is a trademark BTI Biotechnology Institute.

DESS products can be used only by licensed dentists, physicians and labs.Please refer ever to the instructions of use available on the website

www.dess-abutments.com or supplied with the product.

Some products may not be available in your country. Some of the products are cleared for US and Canada.Please contact your local distributor for more details.

INS-04-ENG-01

DESS LIBRARY GUIDE - Amazon Web Services › 3Shape...50.047 52.047 15.007 1 5.054 2 - DESS ANGLE...

Documents

Transcript of DESS LIBRARY GUIDE - Amazon Web Services › 3Shape...50.047 52.047 15.007 1 5.054 2 - DESS ANGLE...