Design to Reality 8-1-2 x 11 - Architectural Glass Fabricators...sizes up to 84” x 137” ASTM...
Transcript of Design to Reality 8-1-2 x 11 - Architectural Glass Fabricators...sizes up to 84” x 137” ASTM...
A R C H I T E C T U R A L F L AT, B E N T A N D S E C U R I T Y G L A S S FA B R I C ATO R S
DESIGN REALITYFRO
M
TO
Ft. Lauderdale FLDalla
s TX
Ledya
rd C
TCleveland OH
DLUBAKSPECIALTY GLASS CORPORATION
g l a s s
Pittsburgh PA
Philadelphia PA
Miami Intl. Airport, FL
George Bush Intl. Airport, Houston TX
Annealed, Heat Strengthened or Tempered.
Maximum Sizes up to 90” x 137” Dependingon Glass Options
Clear, White or Colored PVB andDuPont SentryGlas® Interlayers and Spallshield®
Hurricane Interlayers Certified to Applicable Codes
Laminated Insulating glass products available insizes up to 84” x 137” ASTM 2190 Certified.
Laminated Pattern Glass
Meets Safety Codes; ANSI Z97, ANSI Z96,and CPSC 16 CFR 1201 CAT I or II
Fabricated according to ASTM 1172
g l a s s
TEMPERED & HEAT STRENGTHENED
Heat Treated Glass available in thicknesses from1/8” to 3/4”
Maximum Size 84” x 180”
Fabricated according to ASTM C1048, MeetsCPSC 16 CFR 1201 CAT I & II as well as ANSI Z97.1
Heat Soak Option Available
High Performance IGU’S available for all Security Glass
Maximum Size 84” x 130”
Fabricated according to ASTM C2190
LAMINATED
Rockefeller Center NY, NY
Mount Pleasant SC
g l a s sINSULATING
041817
Bent Tempered, Sizes up to 98” x 138”Minimum Radius of 40”
Annealed Laminated or Insulating up to96” x 170”, Contact us for Details
Bent Reflective and Low E Glass
Compound Bends
Fabricated to ASTM C 1464
SILK SCREEN PRINTED DESIGN
g l a s s
Ohio
Ric
hm
ond V
irgin
ia
Custom and Standard Patterns
Wide Array of Fired on Ceramic Frit Colors
Standard Sizes up to 80” x 130”Larger Sizes can be Reviewed Upon Request
Available in Monolithic, Heat Strengthened,Tempered, Laminated or Insulating Units(80” x 130”) ASTM E 2190 Certified
Curved Units Available, Call for Details
BENT
g l a s s
Palm
Beach
FL
Virginia Beach VA
Birm
ingham
AL
Glass Clad Polycarbonate Products
ASTM 1233-95Class 1 Forced EntryDGCP437
Product
Number
Forced Entry
Protection
Ballistic
Protection
ASTM F1915-05 Grade 4 HPW-TP-0500.03Level A Ballistics .38 Special
Modified (Spall No Penetration)10 Min. Forced Entry
20 Min. Forced Entry
20 Min. Forced Entry
20 Min. Forced Entry
40 Min. Forced Entry
40 Min. Forced Entry
40 Min. Forced Entry
60 Min. Forced Entry
60 Min. Forced Entry
60 Min. Forced Entry
N/A
DGCP562
DGCP687
DGCP750
DGCP812
DGCP937
DGCP1000
DGCP1250
ASTM F1915-05 Grade 3
ASTM F1915-05 Grade 2
ASTM F1915-05 Grade 3
ASTM F1915-05 Grade 2
ASTM F1915-05 Grade 1
ASTM F1915-05 Grade 1
HPW-TP-0500.03Level B Ballistics 9mm
Modified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics 9mm
Modified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics 9mm
Modified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics .357 MagnumModified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics .357 MagnumModified (Spall No Penetration)
HPW-TP-0500.03Level C Ballistics .44 MagnumModified (Spall No Penetration)
4.46 82.2% .868 .720 .832.436”.458” .508”
MinNominal Max
Thickness Tolerance Weight
lbs/sq ft
Visible Light
Transmittance
Shading
CoefficientWinter
U-Value
5.97
6.21
5.09
6.06
6.85
7.57
10.71
73.4%
73.0%
77.9%
75.4%
69.2%
67.3%
63.8%
.741
.730
.806
.746
.685
.650
.634
.696
.693
.709
.700
.686
.682
.641
.804
.800
.819
.809
.792
.787
.740
.647”
.683”
.528”
.658”
.775”
.879”
1.123”
.703”
.744”
.560”
.715”
.846”
.960”
1.221”
.778”
.823”
.620”
.791”
.935”
1.061”
1.326”
Solar
Heat Gain
Coefficient
Size Restrictions:, Ask for Details
Detention Center
Standard Sizes for Polycarbonate Laminatesup to 60” x 120” or 72” x 96”Larger Sizes Available Upon Request
Insulating Units AvailableASTM E 2190 Certified
Strengthened Glass Surfaces forMaximum Scratch & Chemical Resistance
High Impact Polycarbonate Core,Single or Multi-Layeredto Meet Desired Protection Level
Urethane Interlayers CreateHigh-Strength Bond
Mar-Resistant Polycarbonate SurfacesMaximum Impact Resistance with noWorry of Glass Breakage
High Impact Polycarbonate Core,Single or Multi-Layeredto Meet Desired Protection Level
Urethane Interlayers CreateHigh-Strength Bond
g l a s s
4.88
6.56
2.35
3.13
8.14
DLP750
DLP1000
DLP375
DLP500
DLP1250
70.0%
62.6%
78.6%
72.2%
60.7%
.661
.585
.831
.762
.524
.763
.741
.794
.770
.736
.880
.854
.915
.888
.848
.707”
.956”
.341”
.455”
1.180”
.786”
1.061”
.399”
.506”
1.311”
.865”
1.169”
.418”
.557”
1.443”
ASTM F1915-05 Grade 3
ASTM F1915-05 Grade 2
ASTM F1915-05 Grade 1
HPWTP0500.03 Level 4Thru Step 44
HPWTP0500.03 Level 4
Size Restrictions: Ask for Details
Product
Number
Forced Entry
Protection
Ballistic
ProtectionHPW-TP-0500.03
Level A Ballistics .38 SpecialNo Spall
HPW-TP-0500.03Level A Ballistics .38 Special
No Spall
HPW-TP-0500.03Level B Ballistics 9mm
No Spall
HPW Level B Modified &UL 752 Level 2 Ballistics.357 Magnum, No Spall
UL 752 Level 3 Ballistics.44 Magnum, No Spall
MinNominal Max
Thickness Tolerance Weight
lbs/sq ft
Visible Light
Transmittance
Shading
CoefficientWinter
U-Value
Solar
Heat Gain
Coefficient
All Polycarbonate Products
LAMINATEDPOLYCARBONATE
FORCED ENTRY& DETENTION
GLASS CLAD POLYCARBONATENY City Housing
Urethane InterlayersCreate High-Strength Bond
High Impact Polycarbonate Core,Single or Multi-Layeredto Meet Desired Security Protection
Wired Glass Plates on Surfaces forFire Protection (Square or Diamond)
Wired Glass-CladPolycarbonate Laminates
FIRE-PROTECTION-RATEDSECURITY GLAZING
Dlubak’s Wired Glass-Clad Polycarbonates are intended for installation infire windows, fire doors, and fire door frames with transoms and/orsidelights that are provided with suitable glazing frame members. Thewired-glass surfaces, bonded to a polycarbonate core create a product thatnot only resists extreme impact from physical and ballistic attack but is also UL Classified Fire-Protection-Rated.These are the ultimate glazing product for detention or correctional facilities and other applications that requireprotection against physical attack and fire.
Our Fire-Protection-Rated products are available in severalstandard makeups that offer a full range of protection againstphysical attack and ballistics as well as 20, 45 and 90 min fireratings. The chart below shows our standard products along withtesting and technical data. Please contact us at 800-336-0562for additional technical information or questions. You can alsovisit our website at www.dlubakglass.com
All of the products above are Fire-Protection- Rated for the following applications. Please review the chartbelow for size and framing restrictions as well as building codes for each rating and application.
Fire-Protection-Rated Security Glazing Products
DFR437WW
Product
Number
Forced Entry
Protection
Ballistic
Protection
HPW-TP-0500.03Level A Ballistics .38 Special
Modified (Spall No Penetration)
N/A
DFR562WW
DFR687WW
DFR750WW
DFR812WW
DFR937WW
DFR1000WW
DFR1250WW
HPW-TP-0500.03Level B Ballistics 9mm
Modified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics 9mm
Modified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics 9mm
Modified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics .357 MagnumModified (Spall No Penetration)
HPW-TP-0500.03Level B Ballistics .357 MagnumModified (Spall No Penetration)
HPW-TP-0500.03Level C Ballistics .44 MagnumModified (Spall No Penetration)
7.88 80.0%.696”.718” .834”
MinNominal Max
Thickness Tolerance Weight
lbs/sq ft
Visible Light
Transmittance
9.39
9.63
8.52
9.48
10.27
10.99
11.24
71.4%
71.1%
75.8%
73.3%
67.3%
65.5%
63.8%
.917”
.953”
.788”
.928”
1.045”
1.149”
1.185”
.963”
1.004”
.820”
.975”
1.106”
1.22”
1.261”
1.104”
1.149”
.946”
1.117”
1.261”
1.387”
1.432”
UL Fire Tested
ASTM 1233-95Class 1 Forced Entry
ASTM F1915-05 Grade 410 Min. Forced Entry
20 Min. Forced Entry
20 Min. Forced Entry
40 Min. Forced Entry
40 Min. Forced Entry
60 Min. Forced Entry
60 Min. Forced Entry
ASTM F1915-05 Grade 3
ASTM F1915-05 Grade 2
ASTM F1915-05 Grade 3
ASTM F1915-05 Grade 2
ASTM F1915-05 Grade 1
ASTM F1915-05 Grade 1
Due to the specialized nature of this product, detailed installation instructions will be provided with each assembly. This product is intendedfor interior installations only, as wire glass breakage can occur due to thermal stress.
UL ClassifiedFire-Protection-Rated GazingMaterial, tested in accordance with:
ANSI/UL9 Standard for Fire Testsof Window Assemblies
ANSI/UL10B Standard for Fire Testsof Door Assemblies
ANSI/UL10C Standard for PositivePressure Fire Tests of Door
Also carries UL CanadianClassification for:
CAN4-S104-10 Canadian NationalStandard Method for Fire Tests of Doors
CAN4-S106-80 Canadian NationalStandard Method for Fire Tests ofWindow Assemblies.
42”
32”
42”
32”
10”
42”
42”
42”
42”
33”
1” (3/4” Bite)
1-1/4” (1” Bite)
1-1/4” (1” Bite)
1-1/4” (1” Bite)
1-1/4” (1” Bite)
D-NH-NT-20
D-NH-NT-20
D-H-NT-45
D-H-NT-45
D-H-NT-90
Window Frame,Transom Frame, Sidelite
Window Frame,Transom Frame, Sidelite
Door With Light Kit
Door With Light Kit
Door With Light Kit
20 Min
20 Min
45 Min
45 Min
90 Min
1764 sq in
1344 sq in
1764 sq in
1344 sq in
100 sq in
ApplicationTotal Area
Rating Maximum Exposed (Visual Opening)
Width Height
Minimum Depth of
Glazing Pocket
Building Code
Markings
C
®
041817
BULLET RESISTANT
All Glass & Thinner and LighterGlass/Polycarbonate Makeups Available
Insulating Units Available(ASTM E 2190 Certified)
Custom Designs & Low Spall UnitsAvailable for Government, Military andCommercial Applications
g l a s s
UL 752 Listed Bullet Resistant Laminates
NIJ 0108.01 and EN 1063 No Spall Bullet Resistant Laminates
16.29 77.1% .850 .577 .669Level 19mm Handgun FMJ Lead Core, 3 shots
Level 19mm Handgun FMJ Lead Core, 3 shots
Level 19mm Handgun FMJ Lead Core, 3 shots
DBG01(All Glass) 1.209”1.29” 1.381”
MinimumNominal Maximum
Thickness Tolerance Weight
lbs/sq ft
Product
Number
Visible Light
Transmittance
Shading
Coefficient
Protection
LevelWinter
U-Value
14.64
8.14
15.96
19.90
12.54
4.42
8.82
8.87
14.64
6.56
15.36
26.30
7.396
27.40
34.54
50.99
DBR34NS(Glass/Polycarbonate)
DBR40NS(Glass/Polycarbonate)
DBR20NS(Glass/Polycarbonate)
DBR32NS(Glass/Polycarbonate)
DBR54NS(Glass/Polycarbonate)
DBR72NS(Glass/Polycarbonate)
DBR105NS(Glass/Polycarbonate)
74.5%
60.7%
73.1%
70.6%
76.0%
83.7%
79.0%
79.3%
74.5%
62.6%
74.2%
56.1%
70.8%
66.8%
59.9%
49.7%
.814
.524
.801
.734
.828
.675
.870
.842
.814
.585
.784
.592
.535
.697
.642
.552
.591
.736
.577
.558
.610
.799
.655
.657
.591
.741
.588
.525
.760
.529
.505
.486
.685
.848
.668
.646
.706
.920
.758
.759
.685
.854
.681
.607
.875
.612
.584
.562
1.134”
1.180”
1.248”
1.562”
.998”
.727”
.713”
.761”
1.134”
.956”
1.216”
2.211”
1.154”
2.135”
2.703”
3.934”
1.238”
1.311”
1.338”
1.718”
1.078”
.808”
.778”
.828”
1.238”
1.061”
1.338”
2.350”
1.283”
2.288”
2.848”
4.140”
1.307”
1.443”
1.432”
1.807”
1.145”
.889”
.823”
.882”
1.307”
1.169”
1.409”
2.552”
1.412”
2.449”
3.093”
4.489”
Solar
Heat Gain
Coefficient
Level 3.44 Mag SWC Gas Checked, 3 shots
Level 3.44 Mag SWC Gas Checked, 3 shots
DBP03(Glass/Polycarbonate)
DPA750(Polycarbonate/Acrylic)
DBP01(Glass/Polycarbonate)
DBP04(Glass/Polycarbonate)
DLP1000(All Polycarbonate)
DBP05(Glass/Polycarbonate)
DLP1250(All Polycarbonate)
DBP08(Glass/Polycarbonate)
DPA1250(Polycarbonate/Acrylic)
NIJ Level 2.357 Mag JSP, 5 shots
9mm FMJ, 5ShotsEN Class Br4
.44 Mag, FCJ Flat NoseSoft Core, 3 Shots
Level 430-06 Riffle Lead Core Soft Point, 1 shot
Level 2.357 MAG JL Soft Point, 3 shots
NIJ Level 3A.44 Mag Handgun Lead
SWC Gas Checked, 5 shots9mm FMJ, 5 Shots
EN Class Br55.56 x 45 NATO, Type SS109
(Steel Penetrator), 3 Shots
Level 57.62 mm Rifle Lead Core FMJ, 1 shot
NIJ Level 37.62 x 51 M80 Ball FMJ Rifle, 5 shots
NIJ Level 37.62 x 51 M80 Ball FMJ Rifle, 5 shots
EN Class Br67.62 x 51 M80 Ball FSJ Rifle, 3 Shots
Level 87.62 mm Rifle Lead Core FMJ, 5 shots
Level 69mm (UZI) Lead Core FMCJ, 5 shots
NIJ Level 430-06 AP Rifle, 1 shot
EN Class BR77.62 x 51 NATO Rifle FCJ Steel Core,
3 shots
NIJ (Modified to .50-cal.)695-grain APM2, Single shot
(2800-2900 ft/s)
Depending on which product you chose, additional options may be available such as : Tinted Glass, Reflective Glass, One Way Mirror, FrostedGlass, Colored Interlayers, Wire Glass, Self-Cleaning Glass, Insulating Units With Low E Coatings, Holes and Pass Thru, Custom Shapes
UL 752 Listed, NIJ & EN No-Spall BallisticProtection, Handguns to High-Powered Rifles
Drive Through WindowsE.F. Bavis
Size Restrictions: Minimum 12” x 12” , Maximum; Ask for Details
Size Restrictions: Minimum; 19-3/4” x 19-3/4” , Maximum; Ask for Details
041817
BLAST RESISTANT
Glass/Polycarbonate Laminates
Insulating Units Available(ASTM E 2190 Certified)
Custom Designs Available for Government,Military and Commercial Applications
g l a s s
Air Force Research Lab, Tyndall
FBI Birmingham, Al
Tempered Glass Laminates(Cost effective & Maximum Durability)
DuPont SentryGlas® & Spall Shield®(Dupont’s Ionoplast Interlayer Technology)
Kathmandu, Nepal USAID AnnexQuito, Ecuador NEC
BLAST DESIGN: It is important to note that a blast resistant window operates as a system. It involves not only the glass itself, but also theframing system, anchoring system and even the structure of the building. Aframe that is not designed for blast or that is not anchored properlymay not hold the glazing during a blast situation causing unnecessary failure and possible injury. A qualified blast engineer should beconsulted for the design of each project.
Gunner Protection Kit Glass
RG 33 MRAP
RG 31 MRAP
Up Armored HMMWV
TRANSPARENT ARMOR
g l a s s
Transparent Armor for Military Applications
Built to ATPD 2352 SpecificationsCurrent Solutions for 1b, 2b, 3a
Heated Windscreens Available
Rock Strike Capability
High Volume Production Capacity to HandleThousands of Parts Per Month
Custom Design and Solutions
Jewelry, Refrigeration, Sneeze Guard, etc
Logos, Sandblasting, etc
DuPont Butacite® PVB, SentyGlas® and Spallshield®Solutia Saflex® PVB, Saflex® HP, Vanceva™ StormHyzod® Polycarbonate Sheet
Butacite® by DuPont - .015”, .030”, .060”, .090” interlayerSentyGlas® by DuPont - .035”, .060”, .090”, .100” interlayerSpallshield® by DuPontSaflex® by Solutia - .015, .030”, .060”, .090” interlayerPolyurethane interlayersColored PVB Interlayers by DuPont, Solutia (Vanceva™) and Trosifol
All Glass, Glass Clad Polycarbonate and all Polycarbonate LaminatesUL 752 Listed Ballistic Levels I, II, III, IV, V, VI, VIIINIJ Ballistic Levels II, III, IIIA, IVEN Ballistic Levels BR4, BR5, BR6, Br7UL 9,10B &10C Classified Fire-Protection-Rated GazingUL CAN4-S104-10 & CAN4-S106-80 Classified Fire-Protection-Rated GazingTransparent Armor for Military Vehicles tested to the ATPD2352 Standard
Dots, Holes, Stripes, Custom Patterns and Colors
Standard and Custom
1/8” to 3/4” thickness
Dlubak Specialty Glass Corp.is an ISO 9001:2008
Certified Manufacturer
Contact Us At:Dlubak Specialty Glass Corp.520 Chestnut StreetP.O. Box 510Blairsville, PA 15717Phone: 800-336-0562Fax: 724-459-0866www.dlubakglass.com
High Performance, Screen Printed / Spandrel, Security / Ballistic
Armored Vehicles, Courthouses, Embassy, etc
Tempered & Annealed, Laminated, Insulated
Blast Resistant
Curved Glass
Display Case
Edge work, Holes (NC machined) / Notches, Water-Jet Cutting
Graphics & Design
Hurricane
Laminated Glass / Interlayer
Security / Bullet Resistant
Screen Printing
Spandrel
Heat Strengthened and Tempered Glass
Insulating / Bystronic Line (ASTM E 2190 Certified)
www.dlubakglass.com
Make your choice forDlubak Specialty Glass CorporationCurved Glass & Specialty Flat Laminated and InsulatingGlass Products
DESIGN REALITYFRO
M
TO
041817
For Additional Information:Specifications and Applicationsfor our Quality Products.Technical Assistance orSamples of our Productsfor your Project needs.Area Sales Representativesavailable upon request.
DLUBAKCurved Glass & Specialty Flat Glass LaminatesSPECIALTY GLASS CORPORATION