CHRISTMAS CARDS TREES

DESIGN PROJECT

2 /10 WWW.CREATE-YOUR-STYLE.COM

CHRISTMAS CARDS TREES

Article Product Group Article No. Amount Size Colour Colour Code

Beads 5328 30 pcs. 4 mm Crystal Metallic Light Gold 2x 001 MLG 2

Beads 5328 15 pcs. 4 mm Greige 284

Supplies

Cardboard, beige, 30 x 21 cmCardboard, green, 17 x 10 cmEmbroidery thread, apple green, 2.1 mEmbroidery thread, beige, 2.1 mEmbroidery thread, dark green, 1.5 mEmbroidery thread, light green, 1.5 mEmbroidery thread, turquoise, 1.5 m

Tools

Beading needleCutterDouble sided sticky tapeRulerScissorsTape

CRYSTALLIZED™ – Swarovski Elements Supplies & Tools

Sewing

STEP 1

Level of design: BEGINNER

Have also a look at the text instruction at the last page!Please note that the instruction as well as the material list refer to the large version of the card.

1:1

8.5 cm

1.3 cm

1.7 cm

6.2 cm

1:1Scale 1:1

3 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 2

STEP 3

70 cm

4 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 4

STEP 5

STEP 6

Repeat x1

Repeat step 4 x2

70 cm

Repeat steps 3 - 5:

5 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 7

STEP 8

Step 7

70 cm

Repeat steps 3 - 5:

50 cm

Repeat steps 3 - 5:

6 /10 WWW.CREATE-YOUR-STYLE.COM

Repeat steps 3 - 5:

50 cm

Step 10

Repeat steps 4 - 5:

STEP 9

STEP 10

STEP 11

Step 9

Repeat steps 4 - 5:

7 /10 WWW.CREATE-YOUR-STYLE.COM

Step 13

Repeat step x2

STEP 12

STEP 13

8 /10 WWW.CREATE-YOUR-STYLE.COM

Step 14

1:2

30 cm

21 cm

STEP 14

Scale 1:2

9 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 15

Repeat steps 2 - 13 x2:

1:1

Scale 1:1

10 /10 WWW.CREATE-YOUR-STYLE.COM

STEP 1: Print out the illustration and cut out the tree with scissors (see red lines in illustration).

STEP 2: Put the tree pattern onto green cardboard, draw outlines onto card board and cut out tree with scissors.

STEP 3: Cut 70 cm of the apple green yarn, slide yarn into beading needle and stitch through tree as you see illustration. Secure the short end with tape on back side.

STEP 4: Continue sewing as you see in the illustration.

STEP 5: Slide on a CRYSTALLIZED™ XILION Bead article 5328 in Crystal Metallic Light Gold and continue sewing.

STEP 6: Cut 70 cm from dark green yarn and repeat steps 3–5 adding the following onto the thread: 1 CRYSTALLIZED™ XILION Bead article 5328 in Greige and 1 CRYSTALLIZED™ XILION Bead article 5328 in Crystal Metallic Light Gold.

STEP 7: Cut 70 cm of the beige yarn and repeat steps 3–5 slide on one CRYSTALLIZED™ XILION Bead article 5328 in Crystal Metallic Light Gold.

STEP 8: Cut 50 cm of the turquoise yarn and repeat steps 3–5. Slide on: 2 CRYSTALLIZED™ XILION Beads article 5328 in Crystal Metallic Light Gold as shown in illustration. After the 4th row, secure the end of the turquoise thread onto the back with tape (this turquoise will not be used any more).

STEP 9: Repeat steps 4–5 with thread end of dark green yarn slide on 1 CRYSTALLIZED™ XILION Bead article 5328 in Greige.

STEP 10: Cut 50 cm of light green yarn and repeat steps 3–5. Slide on: 1 CRYSTALLIZED™ XILION Bead article 5328 in Crystal Metallic Light Gold, 1 CRYSTALLIZED™ XILION Bead article 5328 in Greige (see illustration).

STEP 11: Repeat steps 4–5 with thread ends from yarns. Slide on 4 CRYSTALLIZED™ XILION Beads article 5328 in Crystal Metallic Light Gold and 2 CRYSTALLIZED™ XILION Beads article 5328 in Greige.

STEP 12: Secure thread ends on back side of tree and cut ends off with scissors.

STEP 13: Put some double sided sticky tape onto back side of tree and cut remaining thread ends off with scissors.

STEP 14: Cut a rectangle of 30 x 21 cm out of the beige card board and fold it in the middle as you see in illustration.

STEP 15: Repeat steps 2–13 twice to get 2 more trees and affi x them onto front side of card.

CREATE YOUR STYLE with CRYSTALLIZED™ – Swarovski Elements Design Project Christmas Cards Trees