Design of a new BOMAG ROOF
-
Upload
sachintha-lenawala -
Category
Design
-
view
15 -
download
0
Transcript of Design of a new BOMAG ROOF
Design of a new BOMAG ROOF Sachintha Lenawala
Diesel and Motor Engineering PLC
Introduction
• The company made BOMAG Roller roof was highly expensive.
• The customer needed low budget roof for above purpose.
• New BOMAG roof had designed.
Fig1. Auto Cad design for BOMAG Roller Roof
Fig2. Design of the structure
Fig3. Attaching the roof
Fig4. Welding & Finishing
Fig5. Finished Roof Assembling Hood cover and
the structure
• Used vibration absorbing tape between hood
cover and the structure. • Used self-locking nuts and bolts for fix the
structure to the roller. • The plates were welded using ARC welding. • Grilled few holes for final fixing purpose to the
roller.
Finishing
• Had Sharpen by using grinding wheels. • Painted and fixed.
Materials
• Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx • Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx • Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx • Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx • Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx • Xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx