Design & fabrication of an automated nut tapping attachment for drilling machine
-
Upload
abhishekgawande -
Category
Education
-
view
1.421 -
download
4
Transcript of Design & fabrication of an automated nut tapping attachment for drilling machine
![Page 1: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/1.jpg)
G.H. Raisoni College of EngineeringDepartment Of Mechanical EngineeringProject Title:- Design and fabrication of a
nut tapping attachment for drilling machine
Guided by : Dr D J Tidke
Presented by:- Abhishek Gawande A-04
Palash Thuturkar A-50 Niraj Pimplapure A-48
Ajinkya Naydu A-74
![Page 2: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/2.jpg)
CONTENTSIntroductionDesign & assemblyWorking procedureNeed for the attachmentCost estimationAdvantages & applicationsReferences
![Page 3: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/3.jpg)
INTRODUCTIONTapping is the operation of cutting
internal threads in a hole using a cutting tool called Tap.
Most of the industries uses the conventional method -- hand tapping.
Threads are taped by manually rotating & feeding the taps through the drilled hole
This conventional method is very time consuming process, less accurate and includes higher labour cost, and ultimately less productivity.
So there is a scope to develop the machine for tapping operation.
![Page 4: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/4.jpg)
An attachment eliminates the purchasing of a new unit which serves the same purpose.
By implementing an attachment to a unit, the capacity of the unit can be increased which is very economical.
Thus based on the functional and economical aspects we are fabricating a unique attatchment.
![Page 5: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/5.jpg)
Bent shank tap is used for tapping
The size of the bent shank is M-12
The drilling machine motor will provide power to the attachment.
The main advantage for using bent shank tap is that the bent part will provide the indirect drive to the spindle.
![Page 6: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/6.jpg)
Project Design
Design of sliding path and pneumatic cylinder
![Page 7: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/7.jpg)
Nuts will slide through hopper.
Locking arrangement is use so that only single nut will enter the path during tapping.
After tapping of 1st nut the cylinder will go back and next nut will enter into the path.
![Page 8: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/8.jpg)
Spindle Design
Design of Spindle
![Page 9: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/9.jpg)
Sectional View of Spindle
![Page 10: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/10.jpg)
Spindle will be fabricated in two parts
Material used for fabricating the spindle is mild steel
Bent shank tap will fit inside the spindle
![Page 11: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/11.jpg)
Bent Shank TapBent shank tap is
used for tappingSize of tap is M-12Due to bent portion
of shank the nut will move upward and finally it gets collected in the container after tapping process.
![Page 12: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/12.jpg)
Working ProcedureThe taper tap is
connected with a bent rod which is made to rotate at high speed along with the spindle causing rotation of the tap at the same speed.
The blanks are automatically pushed intermittently under the tap and after threading the tap returns but along with the threaded nut.
![Page 13: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/13.jpg)
Finally the accumulated nuts are thrown out form the rod by centrifugal force to come out from the hopper.
the bent shank tap held in a casing which has nuts along the shank and fit the cavity. The casing is provided the drive by drilling machine spindle. Nut feeding and spindle operating mechanisms are also designed.
![Page 14: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/14.jpg)
Also we have designed the path for the feeding of the nut.
Nut will be pushed forward using pneumatics.
After tapping, the nut will move along the shank and at the end, it will get collected in the container.
![Page 15: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/15.jpg)
NEED FOR ATTACHMENT•In recent years, new fabrication
techniques have been developed to satisfy the technological demands. Moreover, emphasis is stressed on attachments.
•Attachments are used in various fields and machines depending upon the needs to be fulfilled and mode of operation.
•An attachment eliminates the purchasing of a new unit which serves the same purpose.
![Page 16: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/16.jpg)
For example, a lathe occupies a place opposite to that of a milling machine, the ten machines mainly used to produce cylindrical and plain surfaces respectively.
By implementing an attachment to a unit, the capacity of the unit can be increased which is very economical.
![Page 17: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/17.jpg)
COST ESTIMATIONItems Estimated Cost
Bent Shank Tap (2 pieces) 4900
Piston cylinder arrangement 1500
Compressor 2000
Hexagonal blanks 100
Material cost 1000
Fabrication works 5000
Motor ,gears ,switches & casing 2000
TOTAL ESTIMATED COST 16500
![Page 18: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/18.jpg)
AdvantagesNo need for doing tapping separately. The extra power required to do the tapping is reduced.Time is reduced.Minimum number of components, so the maintenance of the assembly is easier.No skilled operators are required.Enables high production rate.The attachment is less expensive.Consumes less floor area.Noiseless and smooth in operation.The attachment is auto reversible
![Page 19: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/19.jpg)
REFERENCES
nptel.iitm.ac.in/en.wikipedia.org/www.youtube.com/?gl=INwww.howstuffworks.com/
![Page 20: Design & fabrication of an automated nut tapping attachment for drilling machine](https://reader037.fdocuments.us/reader037/viewer/2022103113/554a31b7b4c90526578b53d8/html5/thumbnails/20.jpg)
Thank You