Description Features - OPNET · Description Features Capacity Options: 4/8/12/16 T1/E1, 4 x V.35...
2
Description Features Capacity Options: 4/8/12/16 T1/E1, 4 x V.35 (Nx64kbps), or a combination Ethernet Interface Four 10/100Base-Tx Ethernet ports with VLAN features High Maintainability LCM & keypad local operation. Craft Interface, Telnet and GUI/SNMP network management Functions Compact Design: Only 1U in height Standard Compatibility: ITU-T G.703, G.823, G.824, IEEE802.3u 10 Base-T & 802.3u 100 Base-Tx Ethernet Interface, CE, RoHs Low bit error rate(BER<10 -10 ) Optical Interface Line Rate: 155.52Mbps ±20ppm Connector: SFP or FC/PC type Optical Link 1+1 redundancy protection mechanism Automatic Laser Shutdown(ALS) protection E1 Signal Interface Bit Rate: 2.048Mbps±50ppm Line Code: HDB3/AMI Pulse Shape: Conform to ITU-T G.703 Impedance: 120Ω balanced or 75Ω unbalanced Jitter: Conform to ITU-T G.823 Connector: RJ-48C or wire-wrapping for 120Ω balanced. BNC for 75Ω unbalanced T1 Interface Bit Rate: 1.544Mbps±50ppm Line Code: B8ZS/AMI Impedance: 100Ω balanced Jitter: Conform to ITU-T G.824 Connector: RJ-48C or wire-wrapping High Reliability Transmission and power redundancy High Flexibility: Hot swappable design Performance monitoring(PM) and history PM data storage UFM-680 155Mbps optical multiplexer equipment provides a flexible and cost effective solution to transport T1/E1, Nx64kbps and Ethernet Services over optical fiber. With modu- lar system design, UFM-680 can accommodate different plugin cards for E1, T1 and V.35 Nx64kbps to fit user's current and future service requirement. UFM-680 embeds four Ether- net ports on board to share up to 100Mbps bandwidth for data transportation. The total capacity of four 10/100 Mbps electrical Ethernet ports and up to 16 T1/E1 interfaces optimize the bandwidth utilization over the optical fiber. The optical link has 1+1 redundancy mecha- nism with APS(Auto Protection Switch) function to increase system reliability.
-
Upload
truongdieu -
Category
Documents
-
view
224 -
download
0
Transcript of Description Features - OPNET · Description Features Capacity Options: 4/8/12/16 T1/E1, 4 x V.35...
Description
Features
Capacity Options:4/8/12/16 T1/E1, 4 x V.35 (Nx64kbps), or a combination Ethernet InterfaceFour 10/100Base-Tx Ethernet ports with VLAN features
High MaintainabilityLCM & keypad local operation. Craft Interface, Telnet and GUI/SNMP network management Functions
Compact Design: Only 1U in height
Standard Compatibility:ITU-T G.703, G.823, G.824, IEEE802.3u 10 Base-T & 802.3u 100 Base-Tx Ethernet Interface, CE, RoHs
Low bit error rate(BER<10-10)
Optical InterfaceLine Rate: 155.52Mbps ±20ppmConnector: SFP or FC/PC typeOptical Link 1+1 redundancy protection mechanismAutomatic Laser Shutdown(ALS) protection
E1 Signal InterfaceBit Rate: 2.048Mbps±50ppmLine Code: HDB3/AMIPulse Shape: Conform to ITU-T G.703Impedance: 120Ω balanced or 75Ω unbalancedJitter: Conform to ITU-T G.823Connector: RJ-48C or wire-wrapping for 120Ω balanced. BNC for 75Ω unbalanced
T1 InterfaceBit Rate: 1.544Mbps±50ppmLine Code: B8ZS/AMIImpedance: 100Ω balancedJitter: Conform to ITU-T G.824Connector: RJ-48C or wire-wrapping
High ReliabilityTransmission and power redundancy
High Flexibility: Hot swappable design
Performance monitoring(PM) and history PM data storage
UFM-680 155Mbps optical multiplexer equipment provides a flexible and cost effective solution to transport T1/E1, Nx64kbps and Ethernet Services over optical fiber. With modu-lar system design, UFM-680 can accommodate different plugin cards for E1, T1 and V.35 Nx64kbps to fit user's current and future service requirement. UFM-680 embeds four Ether-net ports on board to share up to 100Mbps bandwidth for data transportation. The total capacity of four 10/100 Mbps electrical Ethernet ports and up to 16 T1/E1 interfaces optimize the bandwidth utilization over the optical fiber. The optical link has 1+1 redundancy mecha-nism with APS(Auto Protection Switch) function to increase system reliability.
www.opnet.com.tw3F, No.5 Industry E. Rd. IX Hsinchu Science Park, Hsinchu 30075 TaiwanTEL: +886-3-5788693 FAX: +886-3-5772320E-mail: [email protected]
Ethernet InterfaceFour RJ-45 10/100Base-Tx, (comply with IEEE802.3u 10 Base-T and 802.3u 100 Base-Tx)Support auto-MDIX functionFrame size is up to 1536 bytesBridge functions:Support MAC address filtering and Embedded 2K entries of address table per portSupport IEEE 802.1Q VLAN, QinQ, 802.1P QoS, DSCP, 4 priority queues per port, Rate limiting
V.35 InterfaceBit Rate: N x 64 Kpbs, N=1 to 32, 64, 128
Power Supply DC: -36 ~ -72VAC: 90~260V, 47~63Hz
InstallationRack mount on a standard 19”/23” rack compliant with ETS 300119
EnvironmentOperating Temperature: 0 to 65°CRelative Humidity: 5 to 95%, non-condensing
EMI/EMCFCC ClassA part 15BEN55082-1, EN55022CE, RoHs
MTBF50,000 hours minimum
Application
Specifications
Tributary Tributary Interface Connector TypeE1UBNC E1
E1/T1ET1URJ(S)*1 E1/T1
ET1UDB(S)*1 E1/T1
V35M V.35
Available Tributary Units
BNC
RJ-48C
DB25
M34 Female
*1 S-model is optional：ET1URJS and ET1UDBS can comply with IEC 61000-4-5:2005 ED.2.0
Mechanical Structure and Dimension19”rack mountable pizza box in nearly 1U heightDimensions: 436mm x 280mm x 44.5mm (WxDxH)
