Deluxe-Plus Method 5 Part # SK-M5DP-V

Schematic of Method 5 Rigid Sampling Train

SK-M5DP-V Includes:

Part # Description Qty. Qty. Shipped SB-2M-C13V Miniature Heated Filter Box, Model 50 (220V) 1 SBR-10 10” Riser for SB-2M, Impinger Box Adapter 1 SB-3 Impinger Box, Model 100, Holds 4 Impingers 1 SB-4 Impinger Box, Model 150, Holds 8 Impingers

1

PS-3-HC14V Probe Sheath, 3 ft with Tube Heater, 240V 1 PS-6-HC14V Probe Sheath, 6 ft with Tube Heater, 240V 1 PS-9-HC14V Probe Sheath, 9 ft with Tube Heater, 240V 1 PL-3S Probe Liner, 3 ft, SS, 5/8" OD with #28 Grooved Ball 1 PL-6S Probe Liner, 6 ft, SS, 5/8" OD with #28 Grooved Ball 1 PL-9S Probe Liner, 9 ft, SS, 5/8" OD with #28 Grooved Ball 1 PLN-3G Probe Liner, Glass, 3 ft, 5/8" OD w/Unground #28 Grooved Ball 3 PLN-6G Probe Liner, Glass, 6 ft, 5/8" OD w/Unground #28 Grooved Ball 3 PLN-9G Probe Liner, Glass, 9 ft, 5/8" OD w/Unground #28 Grooved Ball 3 US-30-10 U-Cord, Split, 30 ft, 1/4"QC, SS 1 US-60-10 U-Cord, Split, 60 ft, 1/4"QC, SS 1 USL-15-SST Unheated Sample Line, 15 ft, 3/8 TFE, SS with TC assembly 1 SB-8 Sample Frame with Probe Clamp and Impinger Box Slides 1 GA-107-12 Sample Line Adapter for SB-2M, includes Bracket and 1/" ID Sample Line Clamp 1 GA-100 Sample Case Adapter with 1/2" SS Male QC 1 NS-SET-S Nozzle Set of 7, SS 1 Includes: NS-4 1/8” (~.125”) SS Nozzle, 5/8” OD Shank 1

NS-6 3/16” (~.187”) SS Nozzle, 5/8” OD Shank w/Preswaged

1 NS-8 1/4” (~.250”) SS Nozzle, 5/8” OD Shank w/Preswaged

1

NS-10 5/16 (~.312”) SS Nozzle, 5/8” OD Shank w/Preswaged

1 NS-5 3/8” (~.375”) SS Nozzle, 5/8” OD Shank w/Preswaged

1

NS-7 7/16 (~.437”) SS Nozzle, 5/8” OD Shank w/Preswaged

1 NS-9 1/2” (~.500”) SS Nozzle, 5/8” OD Shank w/Preswaged

1

SH-NZ Nozzle Case with Foam Lining (holds 7 nozzles) 1 N-10 Nut, 5/8 Tube, SS (One nut on #16 Nozzle) 4 O-014V O-Ring, Viton, 1/2-14” UT, LG-SM 21

NG-SET-S Nozzle Set of 7, Glass 1 Includes: NG-4 1/8” (~.125”) Glass Nozzle, 5/8” OD Shank 1

NG-6 3/16” (~.187”) Glass Nozzle, 5/8” OD Shank 1 NG-8 1/4” (~.250”) Glass Nozzle, 5/8” OD Shank 1 NG-10 5/16 (~.312”) Glass Nozzle, 5/8” OD Shank 1 NG-5 3/8” (~.375”) Glass Nozzle, 5/8” OD Shank 1 NG-7 7/16 (~.437”) Glass Nozzle, 5/8” OD Shank 1 NG-9 1/2” (~.500”) Glass Nozzle, 5/8” OD Shank 1 SH-NZ Nozzle Case with Foam Lining (holds 7 nozzles) 1 NTG-10F 5/8” Glass Filled Teflon Ferrules 3

GN-DGS Deluxe Glassware Set 1 Includes: GN-1 Cyclone Bypass, Unground 4

GNFA- 3” or 4” Filter Assembly Includes:

GN-S 3 or 4” Filter Inlet, Unground #28 Socket 4 GA-T 3 or 4” TFE Filter Disk with O-Rings 4

GN-B 3 or 4” Filter Outlet, Unground #28 Ball 4 *GA-CA 3 or 4” Filter Clamp, Open Style, Aluminum 4

GN-8 Double L Adapter, Unground #28 Sockets 2 GN-8-18K Double L Adapter with Type K TC assembly, includes Cap

2

GN-9AO Greenburg-Smith Impinger (with Orifice), Unground 3 GN-9A Mod Greenburg-Smith Impinger (Plain), Unground 7 GN-11 U-Tube, Unground #28 Sockets 8 TC-GW2.5 Glassware Transport Case 1 GA-□P Filter Tripod, 3” or 4” 1 O-116V Silicone O-Ring for Grooved #28 Ball 30 O-123V Lower Taper Viton O-Ring for Impinger 10 O-126V Upper Taper Viton O-Ring for Impinger 10 BS28WS #28 Ball Joint Clamp (Generic) 30

GF-3TPG Teflon/Glass 3” Fiber Filters (50 pack) 1 GF-3 Glass Fiber Filters, 3” 1 PBX-S Probe Brush Kit, SS 1 Includes: PB-5/8A Probe Brush/Plain 2

PBX-2 2’ Probe Brush Extension 2 PBX-3 3’ Probe Brush Extension 3 PBK-832 Probe Brush Knob 1 2044T47 Tubing, 1” OD, Plastic 4 2044T67 Cap, Sleeve, 1-V16ID, Square, Red 2

NB-SET Nozzle Brush Set in Carrying Tube 1 Includes: NB-3 Nozzle Brush 3/16” Diameter, Nylon Bristles 1

NB-5 Nozzle Brush 5/16” Diameter, Nylon Bristles NB-8 Nozzle Brush 1/2” Diameter Nylon Bristles 2044T65 Cap, Sleeve, 3/4 Diameter, Square, Red 2044T45 Tubing, Polycarbonate, 3/4 OD

M5A-C Calculator, Pre-programmed with Method 5 Isokinetic Calculations 1 P1000-9 Monorail, 9 ft, Steel with Chain, Bracket and Hardware 2 P1001-12 Monorail, 12 LF, Heavy Duty with Chain, Bracket and Hardware 2 P2751 Trolley, Swivel Frame with Eye Bolt, Chain and Snap Hook 2 TC-XC5 Transport Case, XC500 Series for Meter Console 1 M5CO-SET Calibration Orifice Set; 5 Calibrated Critical Orifices & Spreadsheet Diskette for

1

Website: www.apexinst.com Contact: info@apexinst.com Phone: (919) 557-7300 or (800) 882-3214

Doc#: Pack-SK-M5DP-V Publish Date: 6/24/2020

Apex Instruments, Inc. 204 Technology Park Lane Fuquay-Varina, NC 27526, U.S.A.

.