Handheld XRF

DELTA Series

A Variety of Options for Metal AnalysisThe DELTA series of handheld XRF analyzers are configured with powerful miniature X-ray tubes, Si-PIN, or highly advanced Silicon Drift Detector (SDD), specialized features and multi-beam optimization for the ultimate in XRF field analysis.

Now routine and common for the DELTA Handheld X-ray Fluorescence (XRF) analyzers are:

• Residuals analysis in low alloy steels

• Sensitive analysis of aluminum (Al) alloys for magnesium (Mg) content

• Sulfur (S) quantification for in-service stainless steels

All units come standard with innovative features including hot swap batteries, SmartSort, Grade Match Messaging, Tramp Library and built-in accelerometer. An optional integrated CMOS camera and small spot collimator is available.

The DELTA Premium and Professional analyzer includes patent-pending automatic barometric pressure correction for accurate light element analysis in a wide range of environmental conditions.

DELTA Premium (DP-2000)• Large area Silicon Drift Detector

• Rh anode X-ray tube

• Customizable 540+ Alloy Grade Library

The DELTA Professional is the value leader in metals analysis is with a Rh-anode X-ray tube and SDD detector.

The DELTA Classic Plus is built with the speed and rugged features characteristic of the DELTA line.

The DELTA Premium is the choice for when every last bit of performance counts.

DELTA Classic Plus (DCC-2000)• Si PIN Detector

• Au anode X-ray tube

• Customizable 500+ Alloy Grade Library

DELTA Professional (DPO-2000)• Silicon Drift Detector

• Rh anode X-ray tube

• Customizable 540+ Alloy Grade Library

DELTA X-ray Fluorescence Alloy Analyzer Performance

Ultimet 1233Cr % Cr ± Mn % Mn ± Fe % Fe ± Co % Co ± Ni % Ni ± Mo % Mo ± W % W ±

DCC-2000 25.5 0.26 0.83 0.090 3.15 0.13 54.0 0.29 9.33 0.19 4.79 0.059 2.13 0.10

DPO-2000 25.6 0.10 0.84 0.048 3.07 0.049 54.1 0.13 9.27 0.086 4.75 0.024 2.15 0.056

DP-2000 25.6 0.10 0.83 0.023 3.06 0.060 54.1 0.12 9.31 0.056 4.73 0.027 2.15 0.043

ASSAY 25.2 0.78 3.02 54.2 9.06 4.77 2.12

304 Stainless SteelSi % Si ± P % P ± V % V ± Cr % Cr ± Mn % Mn ± Fe % Fe ± Ni % Ni ± Cu % Cu ± Mo % Mo ±

DCC-2000 — — — — — — 18.2 0.10 1.49 0.08 71.5 0.22 8.14 0.21 0.42 0.070 0.21 0.010

DPO-2000 0.25 0.025 0.041 0.006 0.054 0.007 18.3 0.11 1.46 0.04 71.4 0.11 7.96 0.10 0.37 0.024 0.21 0.007

DP-2000 0.23 0.014 0.038 0.003 0.058 0.012 18.3 0.14 1.46 0.06 71.4 0.14 8.02 0.06 0.37 0.016 0.21 0.003

ASSAY 0.27 0.043 0.036 18.3 1.48 bal 8.09 0.40 0.20

Al 6061Mg % Mg ± Si % Si ± Cr % Cr ± Mn % Mn ± Fe % Fe ± Ni % Ni ± Cu % Cu ± Zn % Zn ±

DCC-2000 — — — — 0.21 0.033 0.073 0.013 0.34 0.028 0.042 0.007 0.33 0.015 0.061 0.007

DPO-2000 1.04 0.09 0.74 0.016 0.20 0.016 0.060 0.007 0.34 0.013 0.044 0.004 0.32 0.009 0.060 0.003

DP-2000 1.02 0.07 0.71 0.006 0.20 0.013 0.054 0.008 0.34 0.012 0.048 0.003 0.31 0.009 0.070 0.003

ASSAY 1.07 0.74 0.19 0.08 0.33 0.031 0.34 0.041

Al 2024

Mg % Mg ± Si % Si ± Cr % Cr ± Mn % Mn ± Fe % Fe ± Ni % Ni ± Cu % Cu ± Zn % Zn ± Sn % Sn ± Pb % Pb ± Bi % Bi ±

DPO-2000 1.38 0.12 0.27 0.010 0.047 0.008 0.72 0.028 0.31 0.016 0.042 0.004 4.60 0.06 0.047 0.004 0.050 0.004 0.058 0.003 0.045 0.003

DP-2000 1.43 0.08 0.27 0.010 0.047 0.008 0.72 0.017 0.31 0.006 0.041 0.003 4.61 0.05 0.051 0.004 0.050 0.004 0.059 0.003 0.047 0.002

ASSAY 1.55 0.26 0.055 0.77 0.31 0.044 4.66 0.054 0.042 0.045 0.039

Al 356.2Mg % Mg ± Si % Si ± Ti % Ti ± Mn % Mn ± Fe % Fe ± Ni % Ni ± Cu % Cu ± Zn % Zn ± Zr % Zr ± Sn % Sn ± Pb % Pb ± Bi % Bi ±

DPO-2000 0.40 0.092 7.66 0.07 0.14 0.026 0.026 0.005 0.15 0.009 0.031 0.003 0.061 0.003 0.067 0.003 0.004 0.0004 0.024 0.002 0.020 0.002 0.027 0.002

DP-2000 0.42 0.082 7.53 0.04 0.13 0.027 0.024 0.004 0.15 0.008 0.030 0.002 0.062 0.002 0.066 0.002 0.004 0.0003 0.024 0.002 0.020 0.001 0.028 0.001

ASSAY 0.41 7.49 0.1 0.029 0.15 0.03 0.062 0.068 0.0034 0.015 0.014 0.022

Ti 6-4Al % Al ± Ti % Ti ± V % V ± Fe % Fe ±

DCC-2000 — — 89.8 0.18 4.00 0.16 0.17 0.019

DPO-2000 5.89 0.111 90.0 0.18 4.01 0.11 0.11 0.017

DP-2000 6.13 0.091 89.8 0.12 3.97 0.05 0.11 0.015

ASSAY 6.16 bal 4.00 0.15

CDA 8932P % P ± Cu % Cu ± Sn % Sn ± Bi % Bi ±

DCC-2000 — — 88.4 0.29 6.37 0.19 5.01 0.23

DPO-2000 0.27 0.020 88.4 0.21 6.23 0.13 5.02 0.11

DP-2000 0.24 0.019 88.3 0.21 6.22 0.15 5.17 0.15

ASSAY 0.19 bal 6.23 5.00

The following data represents typical analytical performance generated from more than 10 analyzers of each DELTA confi guration. DELTA Classic Plus testing time is 5 seconds. Testing times for Professional analyzer are 5 seconds for Beam 1 (for elements Ti and higher), and 30 seconds for Beam 2 (for elements

Mg, Al, Si, S, and P). Actual testing times in the fi eld are commonly shorter. “±” values shown represent analysis standard deviation, calculated as 1-sigma or 67% confi dence. Samples analyzed are certifi ed reference materials (CRMs).

www.olympus-ims.com

48 Woerd Avenue, Waltham, MA 02453, USA, Tel.: (1) 781-419-3900

is certifi ed to ISO 9001, ISO 14001, and OHSAS 18001.

*All specifi cations are subject to change without notice. All brands are trademarks or registered trademarks of their respective owners and third party entities.

Copyright © 2014 by Olympus NDT.