De’Longhi Waste Disposer 2009

De’stroy

De’Longhi Waste DisposerIntroducing the De’Longhi WD1000 – a waste disposer unit powerful enough to handle the toughest jobs yet quiet in operation. Featuring light-weight construction, a fine grinding system and continuous feed plus a built-in air switch. All these features will ensure the De’Longhi RotoRaptor™ is one kitchen accessory you can’t do without.

BUILT-IN AIR SWITCH FOR EASY OPERATIONEASILY FITTED TO DOUBLE OR SINGLE BOWL SINKS

WD1000 De’Longhi WASTE DISPOSER

BUILT IN AIR SWITCH

Activating your WD1000 is as easy as pressing a button. Built into your bench top the air switch ensures convenience and ease when disposing of unwanted kitchen waste.

LOAD SENSING MOTOR

The PMDC* Motor draws variable current which will adapt to all load sizes. PMDC has both high starting and stalled torque resulting in less jamming.

PATENTED FINE GRINDING SYSTEM

The RotoRaptor™ combines slanted stainless steel cutting teeth with powerful raptor tails and claws ensuring a faster and finer grinding system. It is capable of grinding hard beef rib bones and also able to grind down soft, fibrous vegetables, with high agility and speed.

STAINLESS STEELGRINDING SYSTEM De’Longhi RotoRaptor™ cutting teeth and grinding chamber are made from high quality stainless steel certifying a finer grind to efficiently dispose of unwanted kitchen waste.

THERMAL CUT OFF

The WD1000 is thermally protected. The unit will automatically cut off in the event of overheating. It is then re-activated by a convenient manual reset switch.

CONTINUOUS FEED

Continuous feed operation allows for fast, efficient and uninterrupted operation.

*Permanent Magnet D.C. Motor

FEATURES

1.25 HORSE POWER

The high powered 1000 Watt PMDC* motor is manufactured to De’Longhi’s specifications ensuring its reliability and superior performance.

5 YEAR WARRANTY

The WD1000 comes with a 5 year full parts warranty.

QUIET OPERATION

Sound created during the disposal process is absorbed within an insulation layer and reduced further with the top baffle and outer housing ensuring quiet operation throughout the toughest jobs.

TESTED TO 5000 CYCLES

To ensure that the WD1000 meets the highest standards of performance and safety, its design and manufacture is stringently factory tested.

NON-CORROSIVE GRIND CHAMBER

STAINLESS STEEL SHREDDING SYSTEM

GRINDING LUGS

WASTE OUTLET

INSULATION LAYER

SOUND BAFFLES

ILLUSTRATION IS A REPRESENTATION OF THE INTERNAL STRUCTURE ONLY

ALL INSTALLATION WORK NEEDS TO BE PERFORMED BY A QUALIFIED TRADES PERSON.

MANUAL RESET SWITCH

INTERNAL COMPONENTS

SPECIFICATIONS

DIMENSIONS

LENGTH A 360mmTotal height (add 1.3cm when using SS sink)

LENGTH B 193mm Total width

LENGTH C 150mmDistance from disposer vertical centreline to discharge pipe centreline

LENGTH D 178mmDistance from bottom of sink bowl to centreline of discharge outlet (add 1.3cm when using SS sink)

LENGTH E 72mmDistance from centreline of discharge outlet to end of discharge pipe

SPECIFICATIONS

Type of feed Continuous

On / OffCan be activated by Air Switch (Included)

Motor 1000 watt (PMDC)

Horse power 1.25

Volts (V) 220-240

Hertz (Hz) 50

RPM 2400

Grind Chamber Capacity 1200ml

Sink Hole Diameter 90mm

D

E

B

C

A

ROTORAPTOR™ PATENT INFORMATION

US PATENT #D547 113 #D560 962

AU PATENT #2008100497 #2008100504

NZ PATENT PENDING

Distributed by De’Longhi Australia Pty LtdABN 49 104 012 857PO BOX 4156 Milperra BC NSW 1891

Distributed by De’Longhi New Zealand LimitedPO Box 58-056 Greenmount, Auckland

For Customer Care and Sales Information contact:

AustraliaPhone: 1800 126 659 Fax: 1800 706 932

New ZealandPhone: 0508 200 300 Fax: 0508 200 301

Optional accessories can be purchased either directly from the point of purchase or by using the online accessory shop at www.delonghi.com.au or www.delonghi.co.nz

To enquire about the warranty information on the products featured in this brochure, please visit:

www.delonghi.com.auwww.delonghi.co.nz

DISCLAIMERS: Not all models available at time of print. Innovations and features depicted in this brochure are on specific models only. The product dimensions and specifications in this brochure apply to the specific product and model at the time of issue. These dimensions and specifications may change at any time. The photographs in this brochure are for illustrative purposes only.