By Robert John

Dell printers are made to perform par excellence. Yet sometimes someinternal or some external circumstantial factors can affect its

performance. Dell Printer in error state issues is usually displayed onthe LCD of the printer in the form of coding errors. Decoding the errorsand always having an IT technician by your side is not always possible.But knowing a few troubleshooting methods up your sleeves is a great

way to face any unwelcomed errors. This article is written to power youup with troubleshooting methods for common Dell Printer Errors State.

(Step-by-Steps) - Dell Printer in error state[Solution]

Reasons that Cause Dell Printer inerror state:

Basic things such as not placing the right size of paper in the paperinput tray of your printer can cause the failure of processing theprint command.Sometimes bad cable and USB connections can cause printer errors.Low ink levels in the ink cartridges can lead to print errors.Paper jams in the paper input tray roller or inner rollers of theprinter can cause errors.If you are not using the latest printer software, you are invitingfuture printer errors.A firmware update is important too, to keep your printer error-free.

It is wise to understand a few common reasons that lead to printererror to handle the issues more deeply and to maintain your printer fora longer run. Let us look at the reasons here:

Easy Solution of Epson Printer inError State:

Press the Windows logo key + R on your keyboard > type devmgmt. MSC andhit Enter to open the Device ManagerClick View on the top menu > select Show hidden devicesRight-click Ports (COM & LPT) > select ProprietiesOpen the Port settings tab in the Properties windowSelect Use any interrupt assigned to the portCheck the box next to Enable legacy Plug and Play detection > click OKReboot your computer and see if it fixed the issue.

Make ports settings changes-1.

2.3.4.5.6.7.

Open the Control Panel > select Devices and PrintersSelect PrinterIf you see that your printer has the Offline status, right-click on it and select Use PrinterOnlineIf it was able to go online, you will see the Ready message instead of Offline.

Open the Control Panel > select View By Large iconsClick on Devices and PrintersRight-click on your printer > select Remove deviceConfirm the device removal and restart your computerAfter the PC reboots, it should automatically detect and install your printer, if not,unplug it and plug it back in again.

Make sure that your printer is Online-1.2.3.

4.

Reinstall the printer driver-1.2.3.4.5.

6.

Press the Windows logo key + R on your keyboard > type services. msc in the Run boxand press EnterSearch for the Print Spooler service in the right pane and first make sure that it is set toStartRight-click on Print Spooler > select ProprietiesIn the General tab, set Startup type to Automatic from the drop-down menu > clickApply > OKClose the Services window and restart your computer to see if it fixed the issue.

Press the Start button > open SettingsClick Update & SecuritySelect Windows UpdateClick Check for updatesIf it finds any updates, let it complete the process and restart your computerAfter rebooting your PC, check if updating Windows fixed the issue.

Set the Print Spooler service to automatic-1.

2.

3.4.

5.

Update Windows-1.2.3.4.5.6.

We hope that our solutions helped you fix this printer issue.If you liked this article, leave a comment in the comment section below.

CONTACT HERE

BLOG -https://www.printererrorsupport.com/blog/resolve-dell-printer-error-state/

By Robert John