Dell 4220 and 2420 Rack Sourcebook v2
description
Transcript of Dell 4220 and 2420 Rack Sourcebook v2
Dell 4220 42U Rack Enclosure and 2420 24U Rack Enclosure
Source DocumentVersion 1.0
Prepared byWilliam MuscatoProduct Manager
Datacenter Infrastructure1/16/2009
1
Dell 4220 and 2420 Rack
TABLE OF CONTENTS
Revision Table.....................................................................................................................2
Product Overview...........................................................................................................3
Product Features............................................................................................................3
Product Features............................................................................................................4
Specifications................................................................................................................10
Products Offered \ Configurations...........................................................................12
Documentation..............................................................................................................14
Competitive Assessment...............................................................................................15
Revision Table
Version Date Changes01 01/16/09 Initial Version
Submitted for Core team approvalUpdatesFinal release for launch
2
Product Overview
The Dell 4220 Rack is a rack enclosure designed to hold and protect server, network and data storage equipment. The Dell 4220 Rack is a sturdy, practical design and solidly built delivered with legendary service, support and reliability. The Dell 4220 Rack features an array of enhancements over traditional cabinets to address critical power, cooling, and cabling issues of the datacenter. Dell 4220 Racks are designed to be used in any environment, a data center, a remote office, a wiring closet or even a factory floor. The Dell PowerEdge Rack is offered in two capacities, 42U spaces (4220) and 24U spaces (2420).
All Dell 4220 Racks adhere to the CEA-310-E standards of 19" for rack mounting of electronics. This means that not only do Dell PowerEdge servers fit in these racks, but also other important networking equipment including Dell PowerVaultTM or Dell EqualLogic and Dell EMC storage, PowerConnectTM or other networking equipment like routers, switches and hubs, or even telephony equipment. Also, built with adjustable mounting rails within the rack, the Dell 4220 Rack is more universal than traditional racks in accommodating multiple types of IT equipment.
Product Features
PowerThe new Dell 4220 Rack provides more choices in the types and form factors of power distribution units (PDUs) that can be mounted in the rack. In addition to U-space PDU mounting, now the Dell 4220 Rack provides ability to perform tool-less PDU mounting either along side the servers or at very rear of the rack along the doors, the Dell 4220 rack is superior in providing the most choices of PDU mounting locations. In addition, the Dell 4220 provides a superior PDU mounting scheme at the rear of rack. To address the need to mount full-length PDUs (1.7m height) alongside the rear door and the need to keep cables from impeding airflow, the Dell 4220 rack provides maximum distance between the back panels of the server to the PDU outlets, compared to similar sized racks.
Cooling The new Dell 4220 rack features doors designed for better airflow with 80% of the doors’ surface area perforated, the highest perforation rating among the leading datacenter racks sold worldwide. Dell 4220 rack is built with a depth of 1070mm, providing more internal space for hot air to exit the rack compared to traditional racks with depths of 1000mm. At the front of the rack frame, air dams have been included to block hot air from traveling from the back of the server to the front of the server, a thermal issue common among traditional racks.
For hot-aisle / cold-aisle thermally efficient datacenter topologies, the footprint of the rack matches standard 2’ floor tile placement, optimizing sub-floor cable and cold-air access without conflict.
Cabling The total depth of both racks has been increased to 1070mm (from 1000mm) to provide support for deep server dimensions while providing additional space for cable management. Dual side panels on both sides of the rack make accessing cables easier by enabling the top or bottom section to be removed. In addition, the back frame of the Dell 4220 rack features removable ‘tail-bars’ at the top and bottom to remove a common obstacle in routing power and communication cables. The removable ‘tail-bars’ can be securely re-attached after the IT equipment rack cabling is complete.
Strength and Security
3
The new Dell 4220 rack has a static load rating of 2,500 lbs, far exceeding the weight capacity of traditional 42U racks. No special infrastructure is necessarily required for many installations. The racks ship with either stabilizer bars to secure the rack to the floor, or ‘ganging kits’ to bolt adjacent racks to each other. With lockable doors at front and rear of the rack, Dell 4220 Racks are designed to be used in any environment, a data center, a remote office, a wiring closet or even a factory floor.
Product Features
Aspect IllustrationClearly labeled U markings for easier installation and service on both the Front and Rear Support Flange
Top Panel Knock Outsand adjustable rear-of-rack sliding cable exit door enable cabling from above
4
Aspect IllustrationSplit Side Panels for easier removal and access to sides of the IT equipment and cables.
Hot/Cold air separator, or ‘air dams’ at front of servers
5
Aspect Illustration1070MM rack depth for accommodating full-height PDUs (1.7m long) in the rear of the rack, and for easier cable management.
Frame channels provide ability to mount 4 total full length PDUs (2 on each side of the rack) and also to mount the “0” U components, including Dell PDUs and Dell KVM Console Switches.
Redesigned Front Door and Side Panel Locks for easier opening
Cable Management Clips for routing cables along the rear
6
Aspect Illustration
4 adjustable vertical mounting rails to enable choice of where IT equipment will sit within the rack; enables IT equipment to sit closer to front door or closer to rear door.
Improved leveling feet are more easily accessible.
7
Aspect IllustrationRe-designed Stabilizer Bars with ‘open face’ to allow cold air to pass through. Stabilizer bars can be front or side mounted.
More durable rear doors with less ‘wobble’.
8
Aspect IllustrationFaster and easier access to rear of rack with re-designed single latch for both doors.
Removable ‘tail-bars’ at both top and bottom of the rear of the rack, makes cabling the IT equipment easier especially in hi-dense environments with 3PH power cables deployed.
9
Aspect Illustration80% perforation on front and rear doors, plus horizontal ‘security bars’ on the front door of the rack.
Fully welded frame (not bolted together)
Specifications
Rack Dimensions2420 Dimensions Height 47.3" (1202mm)
Width 23.82" (605mm)Depth 42.15" (1070mm)
4220 Dimensions Height 78.7" (1999mm)Width 23.82" (605mm)Depth 42.15" (1070mm)
Rack Weights2420 94.5kg
4220 frame 86kg4220 frame, doors 106kg
10
4220 fr, drs, sides 135kg
Crate Weights2420 68kg
4220 frame 90.5kg4220 frame, doors 90.5kg4220 fr, drs, sides 90.5kg
Total Weight2420 162.5kg
4220 frame 176.5kg4220 frame, doors 196.5kg4220 fr, drs, sides 225.5kg
Rack Features New Dell PowerEdge 4220 rack has a static load rating of 2,500 lbs.
New Dell PowerEdge 2420 rack has a static load rating of 1,500 lbs.
Large open base for cable entry and exit Dual rear doors Split side panels Adjustable mounting rails slide forward or backward within
the rack 80% of their surface area of front and rear doors are
perforated to aid in the thermal management of ultra-dense environments
Rack-top cable exits with adjustable, sliding door Reinforced frame for stability Unique side-rack PDU options for Dell PDUs Reversible front door to open from left or right. Front and rear doors are removable Rotating rear castors to easily position rack Ideal base dimensions for 2-tile placement in datacenter U-space numerical markings on both front server mounting
posts Easily accessible leveling feet Height allows to move through standard doorway
Rack Color Dell Standard BlackProducts Supported All current and discontinued Dell PowerEdge,
PowerConnect and PowerVault products.Shipping Standard ground shipping container
Air freight container
11
Products Offered \ Configurations
Part Number
Replaces Description
MODs
F385K 6K886 MOD,RACK,R2K,FRM/DOOR,GND,WWG470K 5J673 MOD,RACK,R2K,F/D/S,GND,42U,USY678J 5J672 MOD,RACK,R2K,F/D,GND,42U,USC684K H2671 MOD,RACK,FRM,GND,42U,APD470K 8J739 MOD,RACK,R2K,F/D,AIR,42U,AP/USF387K 8J738 MOD,RACK,R2K,FRM,AIR,42U,AP/USG471K 8J740 MOD,RACK,F/D/S,AIR,42U,AP/USY681J 5P835 MOD,RACK,F/D/S,GND,24U,USC687K 6P362 MOD,RACK,F/D/S,AIR,24U,AP/USD473K M2273 MOD,RACK,F/D/S,GND,24U,AP
Part Number
Replaces Description
BasesG463K Y4805 BASE,RACK,FRM,GND,42U,EMFY665J Y4806 BASE,RACK,F/D,GND,42U,EMFC679K Y4807 BASE,RACK,F/D/S,GND,42U,EMF
12
D464K Y4808 BASE,RACK,FRM,AIR,42U,EMFF382K Y4809 BASE,RACK,F/D,AIR,42U,EMFG464K Y4810 BASE,RACK,F/D/S,AIR,42U,EMFY666J Y4814 BASE,RACK,F/D,GND,42U,EMF,UNIC680K 0J674 BASE,RK,R2K,FRM/DOOR,GND,OEMD465K 0J420 BASE,RK,R2K,FRM/DOOR/SDPL,GNDF383K 0J419 BASE,RK,R2K,FRM/DOOR,GND,WWG467K M2261 BASE,RACK,FRM,GND,42U,APCC/USY670J 1J383 BASE,RK,R2K,FRM/DOOR,AIR,WWC682K 1J382 BASE,RK,R2K,FRM,AIR,WWD467K 1J384 BASE,RK,R2K,FRM/DOOR/SDPL,AIRF384K Y4811 BASE,RACK,F/D/S,GND,24U,EMFG468K Y4812 BASE,RACK,F/D/S,AIR,24U,EMFY674J 2R240 BASE,RK,SHT-RK,BLK,GND,24UC683K 2R241 BASE,RK,SHT-RK,BLK,AIR,24U,V2D469K J2624 BASE,RACK,24U,BLK,GND,EMF/AP
Part Number
Replaces Description
Upper Level Kits
Y643J KM014 KIT,RACK,FRM,GND,EMEA,42UC674K WU548 KIT,RACK,F/D,GND,EMEA,42UD459K MT020 KIT,RACK,F/D/S,GND,EMEA,42UF377K RM386 KIT,RACK,FRM,AIR,EMEA,42UG460K PW411 KIT,RACK,F/D,AIR,EMEA,42UY661J KM015 KIT,RACK,F/D/S,AIR,EMEA,42UC675K WU549 KIT,RACK,F/D,GND,42U,EMEA,UNID460K MT021 KIT,RACK,FRM/DOOR,GND,US,UNIF378K RM387 KIT,RACK,F/D/S,GND,APCC/US,42UG461K PW412 KIT,RACK,F/D,GND,APCC/US,42UY662J KM016 KIT,RACK,FRM,GND,APCC/US,42UC676K WU551 KIT,RACK,F/D,AIR,APCC/US,42UD461K MT023 KIT,RACK,FRM,AIR,APCC/US,42UF379K RM389 KIT,RACK,F/D/S,AIR,APCC/US,42UG462K PW416 KIT,RACK,F/D/S,GND,EMEA,24UY663J KM020 KIT,RACK,F/D/S,AIR,EMEA,24UC677K WU553 KIT,RACK,F/D/S,GND,APCC/US,24UD462K MT024 KIT,RACK,F/D/S,AIR,APCC/US,24UF380K WU553 KIT,RACK,FRM,GND,US,24U
RTS:
42U Rack, standard dimensions Frame only
Frame with doors
Frame with sides, doors
24U Rack Frame only
Frame, sides, and doors
13
Rack Accessories Front Door Kit (4210, old design) available to Dec ‘09
Side panels
Door kit (front and back)
Rear door kit
Side stabilizer kit
120V/208V/230V Power Fan Kits, Rackmount
Fixed Rack Equipment Shelf
Ganging Kit
Dell interconnect kit to attach 2 Dell racks together
Blanking Panels
1U, 2U, 3U, and 6U closeout filler panels
Dell Rackmount Keyboard tray
Dell Rackmount 1U console tray with 17 inch monitor
Dell Rackmount UPSs
Dell Rackmount PDUs
Dell KVM switch.
Documentation
The following documentation will be provided for the Dell Poweredge 4220 Rack
Installation Guide for the 4220 RackVarious cabling guides on “Support.dell.com” Online Technical Information (OTI) (online documentation for technical support personnel)
Competitive Assessment
Dell 1070mm
Depth
$ 1249 Superior thermals, maximum cabling space, removable tail-bars, highest door perforation rating, widest distance of PDU outlets from server back
14
panels.APC 1070mm
Depth$ 1250 Rack-top chimney accessory, seismic version, more
choices on heights and widths of rack cabinets
HP 1000mm Depth
$ 1249 More choices on heights: 14U, 22U, 36U, 42U, 47U; have an option for a wider rack.
IBM 1000mm Depth
$ 1389 More choices on heights: 14U, 24U, 42U
15