ONE STOP SOLUTION FOR ALL POWER SECTOR NEEDS

DEGI TRANS PRIVATE LIMITED

Address:

408, B Block, Kushal Towers, Khairatabad,

Hyderabad, Telangana, India 500004

Phone : +91-(0)40 4851 6688

Degi Trans Private Limited was established in 2010.

Started as a small team and now has established

professional team with expertise in Electrical,

Structural and Civil Engineering services. Degi Trans is

ready to work for a company as their extended

designs team and use past experience to complete

customer's project in a faster pace. Degi Trans can

handle site specific problems and give the right

advice which can satisfy all the conditions.

More than 20 Towers designed by Degi Trans

successfully completed type testing at CPRI,

Bangalore with no failures reported. Company also

designed pile foundations for towers located in rivers

Ganga, Kuil, Godavari & many more.

info@degitrans.com | www.degitrans.com

Route Survey of transmission lines with profiling and tower spotting.

Design of Transmission line towers up to 765kV.

Preparation of Structural drawings for all the towers up to 765kV including Fabrication drawings, shop sketches and BOM.

Design of foundations (Pad and Chimney, Raft and Pile) for all types of Soils.

New and economical conductor design suitable for your projects.

Suggestions on upgrading and uprating of transmission lines.

Special tower designs for River crossing and other crossings (Rail, underneath or overhead crossing of power lines).

Pile foundation design for river crossing towers.

Third Party inspections of tower parts and accessories.

Advice on schemes for power evacuation.

Preparation of Sag template Curve on Acrylic sheet. (Softcopy can be provided)

Preparation of Stringing charts for conductor and ground wire.

Failure report for collapsed towers.

Complete project monitoring of Transmission line.

Design checking of existing towers.

Services we offer

TRANSMISSION LINES

SUBSTATIONS Complete engineering consultancy of substation which includes all the below

services.

Preparation of layouts - Plan and Section with all electrical clearances maintained.

Earth Mat design and Calculations for entire substation earthing.

Preparation of erection material for substation including clamps and connectors.

Direct Stroke Lighting protection design and calculations.

Illumination design.

Preparation cable schedules for entire substation.

Relay Setting and Relay Co-ordination.

CT sizing calculation. Preparation of Equipment specifications.

Short circuit force calculations.

Structural & Civil designs of all main structures and equipments.

Transformer foundation design and drawing.

Road & Culvert design, Drain, gate & fence design.

Control Room Design and drawing including trenches, placement of panels, internal electrification etc.

SOFTWARE SOLUTIONS

Degi Trans Private Limited, 408, B Block, Kushal Towers, Khairatabad, Hyderabad, Telangana, India, 500004

PH: Phone : +91-(0)40 48516688 , info@degitrans.com | www.degitrans.com

TowGeom—A unique tool that provides tower designers to generate tower geometry with redundants very fast and in simple way.

Stringing Charts—A tool for table between Sag, Tension with Temperature used while stringing of power conductors and earth wires.

BOM Creator— A tool for automatic creation of Bill of material for tower parts.

Load Tree Generator— A tool for automatic creation of Load Trees for specified load cases.

` TowGeom: Tower geometry made fast and simple

Advanced Tool for Tower design: faster Geometry, easy body wind loads and weight optimization

A unique tool that provides tower designers to generate tower geometry with redundants very fast and in simple way.

Any simple to complex vertical tower configuration can be done in less than 15 minutes… thus saving at least 8 to 24 hours of tower designer’s time for designing a tower.

The program generates the geometry data (Primary nodes, secondary nodes, sections) and design data (Angle groups, Angle members) in excel format that can be copied directly to PLS-Tower.

The program generates body wind loads and panel wise tower weights in excel format, that auto updates for change in member sizes or wind pressure or gust or drag values.

The program also generates elevation and isometric drawings that can be used for report submission.

In summary, this program is simple to use, a powerful tool for generating tower geometry and also pro-vides valuable time for designers to focus on tower design and optimization. Again, design iterations for different geometries is made easy using this tool.

TO KNOW MORE SCAN

Degi Trans Private Limited, 408, B Block, Kushal Towers, Khairatabad, Hyderabad, Telangana, India, 500004

PH: Phone : +91-(0)40 48516688 , info@degitrans.com | www.degitrans.com

PLS Tower Models with Redundants created from TowGeom Software

400KV TOWER 220KV TOWER

Our Experience

Our Major Clients

Transmission Lines: Design of 400kV Double Circuit towers for HVPNL Design of 132kV towers, foundation design and testing for HVPNL Design of 220kV Narrow base multi circuit towers for HVPNL Design of 66kV Multi Circuit and Double Circuit Narrow Base towers for HVPNL Design of 400kV river crossing and anchor tower for TSTRANSCO Design of 132kV towers in hilly terrain of Himachal Pradesh for Hydro Electric Project Design and complete consultancy for evacuation of Deekshi Hydro Electric Power in Arunachal Pradesh Design of 400kV Cable termination from overhead line at Navi Mumbai Design of 220KV Cable Termination towers for TSTRANSCO Design of 33kV towers for solar power evacuation Design of 60M Telecom Tower Substations: Upgrading of 33kV Substation - Electrical, Civil and Structure designs for BSPTCL Complete engineering for 220/132/33kV GIS Substation at Atchuthapuram Complete engineering for 400/220kV Substation at Hindupur Complete engineering for 400/220kV Substation at Rachagunneri Complete engineering for 220/132/33kV Substation at Naidupeta Complete engineering for 132/33kV GIS at Moghalrajpuram Complete engineering for 400/220kV Substation at Jangaon Special Foundations: Design of 220kV Tower Pile foundation design in Koshi river and Ghandak river for BSPTCL Design of Pile foundation for 400kV river crossing Anchor Tower for TSTRANSCO Design of Pile foundation for 400kV Double Circuit Tower for APTRANSCO Design of 132kV Pile foundation in Tawi River at Jammu & Kashmir. Miscellaneous: Modification of 765kV/400kV Layout in UPPTCL boot project Preparation of 765kV and 400kV stringing charts Rectification of 220kV Misaligned foundations for TSTRANSCO

Degi Trans Private Limited, 408, B Block, Kushal Towers, Khairatabad, Hyderabad, Telangana, India, 500004

PH: Phone : +91-(0)40 48516688 , info@degitrans.com | www.degitrans.com