Defining the Research Problem - eko.staff.uns.ac.id · pengembangan gipsum Tasikmalaya sebagai...
Transcript of Defining the Research Problem - eko.staff.uns.ac.id · pengembangan gipsum Tasikmalaya sebagai...
Defining the Research Problem
Dr. Eko Pujiyanto , S.Si., M.T.
Jurusan Teknik Industri - Universitas Sebelas Maret
Content
• What Is A Research Problem
• Signifikansi Masalah Riset
• Sources Of Problems
• Steps To Identifying A Research Problem• Steps To Identifying A Research Problem
• Kriteria Rumusan Masalah Yang Baik
• An Ilustration
Jurusan Teknik Industri - Universitas Sebelas Maret
What Is A Research Problem?
• The identification and analysis a research
problem is the first and most crucial step of
research process.
• Defining a research problem is the fuel that • Defining a research problem is the fuel that
drives the scientific process, and is the
foundation of any research method and
experimental design, from true experiment to
case study.
Jurusan Teknik Industri - Universitas Sebelas Maret
Signifikansi Masalah Riset
1. Perumusan masalah merupakan langkah
awal yang menentukan bagi penyusunan
mata rantai metodologik berikutnya.
2. Dengan perumusan penelitian yang baik, 2. Dengan perumusan penelitian yang baik,
peneliti dapat mengetahui
“prognosis”penelitian yang akan dilakukan.
Jurusan Teknik Industri - Universitas Sebelas Maret
Signifikansi Masalah Riset
3. Dari rumusan masalah dapat diketahui
konfirmasi ketepatan judul dan tujuan
penelitian yang ditetapkan.
4. Dari rumusan masalah dapat diketahui 4. Dari rumusan masalah dapat diketahui
seberapa jauh penelitian yang dilakukan
berkaitan dengan bobot dan orisinal.
Jurusan Teknik Industri - Universitas Sebelas Maret
Sources Of Problems
1. Personal experiences of the investigator in the
field of education are the main source for
identifying suitable problem.
2. The other source of problem which is most 2. The other source of problem which is most
frequently used by the investigator as suggested
by the supervisors, is the extensive study of
available literature-research abstracts, journals,
hand-books of research international abstracts
etc.
Jurusan Teknik Industri - Universitas Sebelas Maret
Sources Of Problems
3. In the choice of a suitable problem, the
researcher has to decide his field of
investigation. He should study the field
intensively in the specific area, this may enable intensively in the specific area, this may enable
him to identify a problem from the specific field.
4. The new innovations, technological changes and
curricular developments are constantly bringing
new problems and new-opportunities for Social
Studies Research.
Jurusan Teknik Industri - Universitas Sebelas Maret
Sources Of Problems
5. The most practical source of problem is to
consult supervisor, experts of the field and
most experienced person of the field.
6. It is a general practice that researchers 6. It is a general practice that researchers
suggest some problems in their research
reports. The researcher can pick up a suitable
problem for his own study.
Jurusan Teknik Industri - Universitas Sebelas Maret
Steps to identifying
a research problem
1. Determining the field of research in which a
researcher is keen to do the research work.
2. The researcher should develop the mastery
on the area or it should be the field of his on the area or it should be the field of his
specialization.
3. He should review the researches conducted
in area to know the recent trend and studies
in the area.
Jurusan Teknik Industri - Universitas Sebelas Maret
Steps to identifying
a research problem
4. On the basis of review, he should consider the
priority field of the study.
5. He should draw an analogy and insight in
identifying a problem or employ his personal identifying a problem or employ his personal
experience of the field in locating the problem.
He may take help of supervisor or expert of the
field.
6. He should pin-point specific aspect of the
problem which is to be investigated
Jurusan Teknik Industri - Universitas Sebelas Maret
Kriteria Rumusan Masalah Yang
Baik
1
Substansi
2
Formulasi
3
Teknis
Jurusan Teknik Industri - Universitas Sebelas Maret
Kriteria Rumusan Masalah Yang
Baik
Subtansi
Masalahbobotatau nilai
Masalahorisinalitaspenelitian
Jurusan Teknik Industri - Universitas Sebelas Maret
Kriteria Rumusan Masalah Yang
Baik
Formulasi
Pertanyaanyang jelas, tajam danakurat
Memperma-salahkanhubungan antardua variable atau lebih
Jurusan Teknik Industri - Universitas Sebelas Maret
Kriteria Rumusan Masalah Yang
Baik
TeknisMasalah kelayakan
penelitian itu sendiri.
Pertimbanganpeneliti
Pertimbanganmetodologik
PertimbanganSaranaJurusan Teknik Industri - Universitas Sebelas Maret
Beberapa Kesalahan Perumusan
Masalah
Masalah terlampau luas
Masalah terlampau sempitMasalah terlampau sempit
Masalah mengandungemosi, prasangka, danunsur-unsur yang tidakilmiah.
Jurusan Teknik Industri - Universitas Sebelas Maret
An Illustration
“Why is productivity in Japan so much higher
than in India”?
In this form the question has a number of
ambiguities such as:
• What sort of productivity is being referred • What sort of productivity is being referred
to?
• With what industries the same is related?
• With what period of time the productivity
is being talked about?
Jurusan Teknik Industri - Universitas Sebelas Maret
An Illustration
Rethinking and discussions about the
problem may result in narrowing down the
question to:
“What factors were responsible for the
higher labour productivity of Japan’s higher labour productivity of Japan’s
manufacturing industries during the decade
1971 to 1980 relative to India’s
manufacturing industries?”
Jurusan Teknik Industri - Universitas Sebelas Maret
An Illustration
Further rethinking and rephrasing might place the problem on a still better operational basis
“To what extent did labour productivity in 1971 to 1980 in Japan exceed that of India in 1971 to 1980 in Japan exceed that of India in respect of 15 selected manufacturing industries?
What factors were responsible for the
productivity differentials between the two countries by industries?”
Jurusan Teknik Industri - Universitas Sebelas Maret
Contoh Perumusan Masalah dari
Skripsi
Bagaimana menetukan setting level optimal dari
faktor-faktor yang berpengaruh terhadap kuat
tekan, laju keausan dan serapan air paving block tekan, laju keausan dan serapan air paving block
lapisan atas dengan penambahan limbah
lumpur IPAL PDAM.
Jurusan Teknik Industri - Universitas Sebelas Maret
Contoh Perumusan Masalah dari
Disertasi
( Pertanyaan riset pada paragraf terakhir sub
bab latar belakang )
Berdasar kajian literatur di atas, dapat
disimpulkan bahwa perlu dilakukan
pengembangan gipsum Tasikmalaya sebagai pengembangan gipsum Tasikmalaya sebagai
bahan dasar bone graft sintetis yang berfungsi
sebagai scaffold. Beberapa pertanyaan yang
muncul berdasarkan kajian literatur di atas
yaitu: 1). bagaimana karakteristik kimia, fisis dan
sitotoksisitas secara in vitro HAg?,
Jurusan Teknik Industri - Universitas Sebelas Maret
Contoh Perumusan Masalah dari
Disertasi
2). bagaimana proses deposisi serbuk dan
sintering digunakan untuk membuat bone graft
sintetis yang berfungsi sebagai scaffold (scaffold
sintetis)? dan 3). bagaimana karakteristik kimia, sintetis)? dan 3). bagaimana karakteristik kimia,
porositas, kekuatan tekan dan sitotoksisitas
secara in vitro bone graft sintetis yang berfungsi
sebagai scaffold (scaffold sintetis)?
Jurusan Teknik Industri - Universitas Sebelas Maret
Contoh Perumusan Masalah dari
Disertasi
Dalam penelitian ini permasalahan khusus
adalah sebagai berikut:
• Bagaimana melakukan sintesis gipsum lokal
Tasikmalaya menjadi serbuk HAg?Tasikmalaya menjadi serbuk HAg?
• Bagaimana karakteristik kimia, fisis dan
sitotoksisitas secara in vitro serbuk HAg?
Jurusan Teknik Industri - Universitas Sebelas Maret
Contoh Perumusan Masalah dari
Disertasi
• Bagaimana melakukan proses deposisi serbuk
dan sintering untuk membuat bone graft
sintetis yang berfungsi sebagai scaffold
(scaffold sintetis)? (scaffold sintetis)?
• Bagaimana karakteristik kimia, porositas,
kekuatan tekan dan sitotoksisitas secara in
vitro bone graft sintetis yang berfungsi
sebagai scaffold (scaffold sintetis)?
Jurusan Teknik Industri - Universitas Sebelas Maret