DECLARATION OF PERFORMANCE No. 001CPR2013-07-01 (GB) rev. 2

1. Product-type identification code;

Type, batch or serial number or any other element allowing identification of the construction product:

Dry-pressed ceramic tiles, with water absorption Eb ≤ 0.5 %

2. Intended use or uses of the construction product, in compliance with the applicable harmonised technical specification, as foreseen

by the manufacturer: Internal and external walls and floorings.

3. Name, registered trade name or registered trade mark and contact address of the manufacturer:

GRUPPO ROMANI S.p.A. Industrie Ceramiche

Via Alessandro Volta, 9,23,25

42013- CASALGRANDE (Reggio Emilia, Italy)

4. System of assessment and verification of constancy of performance (AVCP) of the construction product: System 4

5. In the case of a declaration of performance concerning a construction product covered by a harmonised standard

Name and identification number of the notified body, if applicable: Not applicable

6. Declared performance characteristics:

Essential characteristics Performance Harmonised technical

specification

Reaction to fire A1FL/A1

EN 14411:2012

Release of dangerous substances, for:

- Cadmium NPD

- Lead NPD

Breaking strength Thickness < 7.5 mm ≥ 700 N

Thickness ≥ 7.5 mm ≥ 1300 N

Slipperiness See Annexed Table

Tactility NPD

Bond strength / adhesion, for:

Cementitious adhesive, type C2 NDP

Thermal shock resistance Pass

Durability for:

- internal use: Pass

- external use: freeze/thaw resistance Pass

7. Performance of the product identified in point 1 is in conformity with the performance stated in point 6.

This certificate of performance is issued under the sole responsibility of the manufacturer as at point 3.

Signed in the name of and on behalf of the producer:

ING. ALESSANDRO BERSELLI, INDUSTRIAL DEPARTMENT Name and function

CASALGRANDE, …………01/03/2017……… ……………………………………………………

Place and date of issue Signed

DECLARATION OF PERFORMANCE No. 002CPR2013-07-01 (GB) rev. 2

1. Product-type identification code;

Type, batch or serial number or any other element allowing identification of the construction product:

Dry-pressed ceramic tiles, with water absorption 0.5 % ≤ Eb ≤ 3%

2. Intended use or uses of the construction product, in compliance with the applicable harmonised technical specification, as foreseen

by the manufacturer: Internal and external walls and floorings.

3. Name, registered trade name or registered trade mark and contact address of the manufacturer:

GRUPPO ROMANI S.p.A. Industrie Ceramiche

Via Alessandro Volta, 9,23,25

42013- CASALGRANDE (Reggio Emilia, Italy)

4. System of assessment and verification of constancy of performance (AVCP) of the construction product: System 4

5. In the case of a declaration of performance concerning a construction product covered by a harmonised standard

Name and identification number of the notified body, if applicable: Not applicable

6. Declared performance characteristics:

Essential characteristics Performance Harmonised technical

specification

Reaction to fire A1FL/A1

EN 14411:2012

Release of dangerous substances, for:

- Cadmium NPD

- Lead NPD

Breaking strength Thickness < 7.5 mm ≥ 700 N

Thickness ≥ 7.5 mm ≥ 1300 N

Slipperiness NDP

Tactility NPD

Bond strength / adhesion, for:

Cementitious adhesive, type C2 NDP

Thermal shock resistance Pass

Durability for:

- internal use: Pass

- external use: freeze/thaw resistance Pass

7. Performance of the product identified in point 1 is in conformity with the performance stated in point 6.

This certificate of performance is issued under the sole responsibility of the manufacturer as at point 3.

Signed in the name of and on behalf of the producer:

ING. ALESSANDRO BERSELLI, INDUSTRIAL DEPARTMENT Name and function

CASALGRANDE, …………01/03/2017…………… ……………………………………………………

Place and date of issue Signed

DECLARATION OF PERFORMANCE No. 003CPR2013-07-01 (GB) rev. 2

1. Product-type identification code;

Type, batch or serial number or any other element allowing identification of the construction product:

Dry-pressed ceramic tiles, with water absorption Eb ≤ 10%

2. Intended use or uses of the construction product, in compliance with the applicable harmonised technical specification, as foreseen

by the manufacturer: Interior wall coverings

3. Name, registered trade name or registered trade mark and manufacturer's address:

GRUPPO ROMANI S.p.A. Industrie Ceramiche

Via Alessandro Volta, 9,23,25

42013- CASALGRANDE (Reggio Emilia, Italy)

4. System of assessment and verification of constancy of performance (AVCP) of the construction product: System 4

5. In the case of a declaration of performance concerning a construction product covered by a harmonised standard

Name and identification number of the notified body, if applicable: Not applicable

6. Declared performance characteristics:

Essential characteristics Performance Harmonised technical

specification

Reaction to fire A1

EN 14411:2012

Release of dangerous substances, for:

- Cadmium NPD

- Lead NPD

Bond strength / adhesion, for:

Cementitious adhesive, type C2 NDP

Durability for:

- internal use: Pass

7. Performance of the product identified in point 1 is in conformity with the performance stated in point 6.

This certificate of performance is issued under the sole responsibility of the manufacturer as at point 3.

Signed in the name of and on behalf of the producer:

ING. ALESSANDRO BERSELLI, INDUSTRIAL DEPARTMENT

Name and function

CASALGRANDE ……………01/03/2017……… ……………………………………………………

Place and date of issue Signed

Allegato a 001CPR2013- Tabella Scivolosità, ove richiesta dalla legislazione nazionale.

Annex to 001CPR2013 - Slip Resistance Table, when required by national legislation. Rev.5

SERIES

COLLECTION

SUPERFICIE /ARTICOLO SE È DA

SPECIFICARE

FINISH/ARTICLE IF NECESSARY TO

SPECIFY

DIN 51130

(DE)

BCRA D.M.

236/1989 (IT)

DOC.

BASICO SU

3/2006 (ES)

MAT NATURAL FINISH R10 >0.40 NDP

ANNI 70 NATURAL FINISH R10 >0.40 NDP

BIARRITZ NATURAL FINISH R10 >0.40 NDP

GRIP R11 >0.40 NPD

CHICAGO NATURAL FINISH R10 >0.40 NDP

GRIP R11 >0.40 NPD

COTTO VOGUE NATURAL FINISH R10 >0.40 NDP

FLAIR NATURAL FINISH R10 >0.40 NDP

HAVANA NATURAL FINISH R10 >0.40 NDP

NEW ORLEANS NATURAL FINISH R10 >0.40 NDP

GRIP R11 >0.40 NPD

PROGETTO ROMA

MILANO

NATURAL FINISH R9 >0.40 NDP

LUX FINISH NDP NDP NPD

RECUPERA NATURAL FINISH R10 >0.40 NDP

SAINT BARTH NATURAL FINISH R10 >0.40 NDP

SAINT TROPEZ NATURAL FINISH R10 >0.40 NDP

GRIP R11 >0.40 NPD

VIA EMILIA NATURAL FINISH R9 >0.40 NDP

LUX FINISH NDP NDP NPD

CIR DICIANNOVE 19 MM OUTDOOR TILES R11 >0.40 NPD