Declaration of Performance - Deltastaal · Declaration of Performance (according to regulation EU...
37
Declaration of Performance (according to regulation EU No 305/2011) No. LPE Plate S235JR Plate S235JR / 1.0038 according EN 10025-2 To be used in-welded, bolted and riveted structures Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040 Website : www.tatasteeleurope.com CE Marking Notified Body Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS Tel :+44 (0)207 423 2428 Email : [email protected] Website : www.lr.org System of assessment and verification of constancy of performance of the product System 2+ Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production control 1 st July 2013 Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited Essential characteristic Performance Harmonised technical specification Tolerances on dimensions and shape Thickness Flatness EN 10029 EN 10029 EN10025-1 2004 Yield strength (transverse) Nominal thickness (mm) Values Min (MPa) > <= - 16 235 16 40 225 40 63 215 63 80 215 80 100 215 100 150 195 Tensile strength (transverse) Nominal thickness (mm) Values (MPa) > <= min max 5 100 360 510 100 150 350 500 Elongation (transverse) Nominal thickness (mm) Values min (%, 5.65√so) > <= 5 40 24 40 63 23 63 100 22 100 150 22 Impact strength (longitudinal) JR 27J at + 20°C Weldability CEV Nominal thickness (mm) Values max (%) > <= - 40 0.35 40 150 0.38 Durability Nominal thickness (mm) Values max (%) - <=40 C:0,17 Mn: 1,40 P: 0,035 S: 0,035 N: 0.012 Cu: 0,55 >40 150 C:0,20 Mn: 1,40 P: 0,035 S: 0,035 N: 0.012 Cu: 0,55 0038 Tata Steel Long Products Europe PO Box 1, Brigg Road Scunthorpe, UK 13 LPE Plate S235JR EN 10025-1 – 2004 Plate S235JR / 1.0038 To be used in-welded, bolted and riveted structures Tolerances on dimensions : Plate EN10029 Elongation : Tensile Strength : Yield Strength : EN10025-2 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Transcript of Declaration of Performance - Deltastaal · Declaration of Performance (according to regulation EU...
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S235JR
Plate S235JR / 1.0038 according EN 10025-2
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (MPa)
> <=
- 16 235
16 40 225
40 63 215
63 80 215
80 100 215
100 150 195
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 360 510
100 150 350 500
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 24
40 63 23
63 100 22
100 150 22
Impact strength (longitudinal)
JR
27J at + 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 40 0.35
40 150 0.38
Durability Nominal thickness (mm)
Values max (%)
- <=40 C:0,17 Mn: 1,40 P: 0,035 S: 0,035 N: 0.012 Cu: 0,55
>40 150 C:0,20 Mn: 1,40 P: 0,035 S: 0,035 N: 0.012 Cu: 0,55
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S235JR
EN 10025-1 – 2004
Plate S235JR / 1.0038
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029 Elongation : Tensile Strength : Yield Strength : EN10025-2 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355J2
Plate S355J2 / 1.0577 according EN 10025-2
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (MPa)
> <=
- 16 355
16 40 345
40 63 325
63 80 325
80 100 315
100 150 295
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 470 630
100 150 450 600
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 20
40 63 19
63 100 18
100 150 18
Impact strength (longitudinal)
J2
27J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 30 0.45
30 40 0.47
40 150 0.47
Durability Nominal thickness (mm)
Values max (%)
- <=40 C:0,20 (>30mm 0,22) Si: 0,55 Mn: 1,60 P: 0,025 S: 0,025 Cu: 0,55
>40 150 C:0,22 Si: 0,55 Mn: 1,60 P: 0,025 S: 0,025 Cu: 0,55
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355J2
EN 10025-1 – 2004
Plate S355J2 / 1.0577
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-2 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355JR
Plate S355JR / 1.0045 according EN 10025-2
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (MPa)
> <=
- 16 355
16 40 345
40 63 325
63 80 325
80 100 315
100 150 295
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 470 630
100 150 450 600
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 20
40 63 19
63 100 18
100 150 18
Impact strength (longitudinal)
JR
27J at + 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 30 0.45
30 40 0.47
40 150 0.47
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,24 Si: 0,55 Mn: 1,60 P: 0,035 S: 0,035 N: 0.012 Cu: 0,55
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355JR
EN 10025-1 – 2004
Plate S355JR / 1.0045
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-2 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355K2
Plate S355K2 / 1.0596 according EN 10025-2
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (MPa)
> <=
- 16 355
16 40 345
40 63 325
63 80 325
80 100 315
100 150 295
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 470 630
100 150 450 600
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 20
40 63 19
63 100 18
100 150 18
Impact strength (longitudinal)
K2
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 30 0.45
30 40 0.47
40 150 0.47
Durability Nominal thickness (mm)
Values max (%)
- <=40 C:0,20 (>30mm 0,22) Si: 0,55 Mn: 1,60 P: 0,025 S: 0,025 Cu: 0,55
>40 - C:0,22 Si: 0,55 Mn: 1,60 P: 0,025 S: 0,025 Cu: 0,55
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355K2
EN 10025-1 – 2004
Plate S355K2 / 1.0596
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-2 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355K2W
Plate S355K2W / 1.8967 according EN 10025-5
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 355
16 40 345
40 63 335
63 80 325
80 100 315
100 150 295
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 470 630
100 150 450 600
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 20
40 63 19
63 100 18
100 150 18
Impact strength (longitudinal)
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 40 -
40 150 -
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,16 Si: 0.50
Mn: 0.50 – 1,50 P: 0,030 S: 0,030 N: 0.009
Cr: 0.40 - 0.80 Cu: 0.25 - 0,55
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355K2W
EN 10025-1 – 2004
Plate S355K2W / 1.8967
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-5 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355M
Plate S355M / 1.8823 according EN 10025-4
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 355
16 40 345
40 63 335
63 80 325
80 100 325
100 120 320
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min Max
5 40 470 630
40 63 450 610
63 100 440 600
100 120 430 590
Elongation
(transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 120 22
Impact strength (longitudinal)
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 16 0.39
16 40 0.39
40 63 0.40
63 120 0.45
Durability Nominal thickness (mm)
- 120 C:0,14 Si: 0,50 Mn: 1,60 P: 0,030 S: 0,025
Nb: 0,050 V: 0,10
Al: 0,020 Ti: 0,05 Cr: 0,30 Ni: 0,50 Mo: 0,10 Cu: 0,55 N: 0,015
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355M
EN 10025-1 – 2004
Plate S355M / 1.8823
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-4 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355ML
Plate S355ML / 1.8834 according EN 10025-4
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 355
16 40 345
40 63 335
63 80 325
80 100 325
100 120 320
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min Max
5 40 470 630
40 63 450 610
63 100 440 600
100 120 430 590
Elongation
(transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 120 22
Impact strength (longitudinal)
27J at - 50°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 16 0.39
16 40 0.39
40 63 0.40
63 120 0.45
Durability Nominal thickness (mm)
Values max (%)
- 120 C:0,14 Si: 0,50 Mn: 1,60 P: 0,025 S: 0,020
Nb: 0,050 V: 0,10
Al: 0,020 Ti: 0,05 Cr: 0,30 Ni: 0,50 Mo: 0,10 Cu: 0,55 N: 0,015
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355ML
EN 10025-1 – 2004
Plate S355ML / 1.8834
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-4 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355N
Plate S355N / 1.0545 according EN 10025-3
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 355
16 40 345
40 63 335
63 80 325
80 100 315
100 150 295
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 470 630
100 150 450 600
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 22
40 63 22
63 80 21
80 150 21
Impact strength (longitudinal)
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 63 0.43
63 100 0.45
100 150 0.45
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,22 Si: 0,55
Mn: 0,85 - 1,75 P: 0,035 S: 0,030
Nb: 0,060 V: 0,14
Al: 0,015 Ti: 0,060 Cr: 0,35 Ni: 0,55 Mo: 0,13 Cu: 0,60 N: 0,017
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355N
EN 10025-1 – 2004
Plate S355N / 1.0545
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-3 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S355NL
Plate S355NL / 1.0546 according EN 10025-3
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 355
16 40 345
40 63 335
63 80 325
80 100 315
100 150 295
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 470 630
100 150 450 600
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 22
40 63 22
63 80 21
80 150 21
Impact strength (longitudinal)
27J at - 50°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 63 0.43
63 100 0.45
100 150 0.45
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,55
Mn: 0,85 - 1,75 P: 0,030 S: 0,025
Nb: 0,060 V: 0,14
Al: 0,015 Ti: 0,060 Cr: 0,35 Ni: 0,55 Mo: 0,13 Cu: 0,60 N: 0,017
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S355NL
EN 10025-1 – 2004
Plate S355NL / 1.0546
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-3 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S420M
Plate S420M / 1.8825 according EN 10025-4
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 420
16 40 400
40 63 390
63 80 380
80 100 370
100 120 365
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min Max
5 40 520 680
40 63 500 660
63 80 480 640
80 100 470 630
100 120 460 620
Elongation
(transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 120 19
Impact strength (longitudinal)
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 16 0.43
16 40 0.45
40 63 0.46
63 120 0.47
Durability Nominal thickness (mm)
Values max (%)
- 120 C:0,16 Si: 0,50 Mn: 1,70 P: 0,030 S: 0,025
Nb: 0,050 V: 0,12
Al: 0,015 Ti: 0,05 Cr: 0,30 Ni: 0,80 Mo: 0,20 Cu: 0,55 N: 0,025
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S420M
EN 10025-1 – 2004
Plate S420M / 1.8834
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-4 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S420ML
Plate S420ML / 1.8836 according EN 10025-4
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 420
16 40 400
40 63 390
63 80 380
80 100 370
100 120 365
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min Max
5 40 520 680
40 63 500 660
63 80 480 640
80 100 470 630
100 120 460 620
Elongation
(transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 120 19
Impact strength (longitudinal)
27J at - 50°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 16 0.43
16 40 0.45
40 63 0.46
63 120 0.47
Durability Nominal thickness (mm)
Values max (%)
- 120 C:0,16 Si: 0,50 Mn: 1,70 P: 0,025 S: 0,020
Nb: 0,050 V: 0,12
Al: 0,015 Ti: 0,05 Cr: 0,30 Ni: 0,80 Mo: 0,20 Cu: 0,55 N: 0,025
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S420ML
EN 10025-1 – 2004
Plate S420ML / 1.8836
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-4 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S420N
Plate S420N / 1.8902 according EN 10025-3
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 420
16 40 400
40 63 390
63 80 370
80 100 360
100 150 340
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 520 680
100 150 500 650
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 19
40 63 19
63 80 18
80 150 18
Impact strength (longitudinal)
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 63 0.48
63 100 0.50
100 150 0.52
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,22 Si: 0,65
Mn: 0,95 - 1,80 P: 0,035 S: 0,030
Nb: 0,060 V: 0,22
Al: 0,015 Ti: 0,060 Cr: 0,35 Ni: 0,85 Mo: 0,13 Cu: 0,60 N: 0,027
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S420N
EN 10025-1 – 2004
Plate S420N / 1.8902
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-3 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S420NL
Plate S420NL / 1.8912 according EN 10025-3
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 420
16 40 400
40 63 390
63 80 370
80 100 360
100 150 340
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 520 680
100 150 500 650
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 19
40 63 19
63 80 18
80 150 18
Impact strength (longitudinal)
27J at - 50°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 63 0.48
63 100 0.50
100 150 0.52
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,22 Si: 0,65
Mn: 0,95 - 1,80 P: 0,030 S: 0,025
Nb: 0,060 V: 0,22
Al: 0,015 Ti: 0,060 Cr: 0,35 Ni: 0,85 Mo: 0,13 Cu: 0,60 N: 0,027
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S420NL
EN 10025-1 – 2004
Plate S420NL / 1.8912
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-3 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S460M
Plate S460M / 1.8827 according EN 10025-4
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 460
16 40 440
40 63 430
63 80 410
80 100 400
100 120 385
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min Max
5 40 540 720
40 63 530 710
63 80 510 690
80 100 500 680
100 120 490 660
Elongation
(transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 120 17
Impact strength (longitudinal)
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 16 0.45
16 40 0.46
40 63 0.47
63 120 0.48
Durability Nominal thickness (mm)
Values max (%)
- 120 C:0,16 Si: 0,60 Mn: 1,70 P: 0,030 S: 0,025
Nb: 0,050 V: 0,12
Al: 0,020 Ti: 0,05 Cr: 0,30 Ni: 0,80 Mo: 0,20 Cu: 0,55 N: 0,025
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S460M
EN 10025-1 – 2004
Plate S460M / 1.8827
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-4 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S460ML
Plate S460ML / 1.8838 according EN 10025-4
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 460
16 40 440
40 63 430
63 80 410
80 100 400
100 120 385
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min Max
5 40 540 720
40 63 530 710
63 80 510 690
80 100 500 680
100 120 490 660
Elongation
(transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 120 17
Impact strength (longitudinal)
27J at - 50°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 16 0.45
16 40 0.46
40 63 0.47
63 120 0.48
Durability Nominal thickness (mm)
- 120 C:0,16 Si: 0,60 Mn: 1,70 P: 0,025 S: 0,020
Nb: 0,050 V: 0,12
Al: 0,020 Ti: 0,05 Cr: 0,30 Ni: 0,80 Mo: 0,20 Cu: 0,55 N: 0,025
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S460ML
EN 10025-1 – 2004
Plate S460ML / 1.8838
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-4 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S460N
Plate S460N / 1.8901 according EN 10025-3
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 460
16 40 440
40 63 430
63 80 410
80 100 400
100 150 380
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 540 720
100 150 530 710
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 17
40 63 17
63 80 17
80 150 17
Impact strength (longitudinal)
40J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 63 0.53
63 100 0.54
100 150 0.55
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,22 Si: 0,65
Mn: 0,95 - 1,80 P: 0,035 S: 0,030
Nb: 0,060 V: 0,22
Al: 0,015 Ti: 0,060 Cr: 0,35 Ni: 0,85 Mo: 0,13 Cu: 0,60 N: 0,027
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S460N
EN 10025-1 – 2004
Plate S460N / 1.8901
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029 Elongation : Tensile Strength : Yield Strength : EN10025-3 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S460NL
Plate S460NL / 1.8903 according EN 10025-3
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 16 460
16 40 440
40 63 430
63 80 410
80 100 400
100 150 380
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 540 720
100 150 530 710
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
5 40 17
40 63 17
63 80 17
80 150 17
Impact strength (longitudinal)
27J at - 50°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 63 0.53
63 100 0.54
100 150 0.55
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,22 Si: 0,65
Mn: 0,95 - 1,80 P: 0,030 S: 0,025
Nb: 0,060 V: 0,22
Al: 0,015 Ti: 0,060 Cr: 0,35 Ni: 0,85 Mo: 0,13 Cu: 0,60 N: 0,027
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S460NL
EN 10025-1 – 2004
Plate S460NL / 1.8903
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-3 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S460Q
Plate S460Q / 1.8908 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 460
50 100 440
100 150 400
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 550 720
100 150 500 670
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 16
Impact strength (longitudinal)
30J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0.47
50 100 0.48
100 150 0.50
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,025 S: 0,015 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S460Q
EN 10025-1 – 2004
Plate S460Q / 1.8908
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S460QL
Plate S460QL / 1.8906 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 460
50 100 440
100 150 400
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 550 720
100 150 500 670
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 17
Impact strength (longitudinal)
30J at - 40°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0.47
50 100 0.48
100 150 0.50
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S460QL
EN 10025-1 – 2004
Plate S460QL / 1.8906
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S460QL1
Plate S460QL1 / 1.8916 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 460
50 100 440
100 150 400
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 550 720
100 150 500 670
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 17
Impact strength (longitudinal)
30J at - 60°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0.47
50 100 0.48
100 150 0.50
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S460QL1
EN 10025-1 – 2004
Plate S460QL1 / 1.8916
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S500Q
Plate S500Q / 1.8924 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 500
50 100 480
100 150 440
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 590 770
100 150 540 720
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 17
Impact strength (longitudinal)
30J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0.47
50 100 0.70
100 150 0.70
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,025 S: 0,015 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S500Q
EN 10025-1 – 2004
Plate S500Q / 1.8924
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S500QL
Plate S500QL / 1.8909 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 500
50 100 480
100 150 440
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 590 770
100 150 540 720
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 17
Impact strength (longitudinal)
30J at - 40°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0.47
50 100 0.70
100 150 0.70
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S500QL
EN 10025-1 – 2004
Plate S500QL / 1.8909
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S500QL1
Plate S500QL1 / 1.8984 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 500
50 100 480
100 150 440
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 590 770
100 150 540 720
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 17
Impact strength (longitudinal)
30J at - 60°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0.47
50 100 0.70
100 150 0.70
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S500QL1
EN 10025-1 – 2004
Plate S500QL1 / 1.8984
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S550Q
Plate S550Q / 1.8904 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 550
50 100 530
100 150 490
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 640 820
100 150 590 770
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 16
Impact strength (longitudinal)
30J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,025 S: 0,015 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S550Q
EN 10025-1 – 2004
Plate S550Q / 1.8904
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S550QL
Plate S550QL / 1.8926 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 550
50 100 530
100 150 490
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 640 820
100 150 590 770
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 16
Impact strength (longitudinal)
30J at - 40°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S550QL
EN 10025-1 – 2004
Plate S550QL / 1.8926
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S550QL1
Plate S550QL1 / 1.8986 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 550
50 100 530
100 150 490
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 640 820
100 150 590 770
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 16
Impact strength (longitudinal)
30J at - 60°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S550QL1
EN 10025-1 – 2004
Plate S550QL1 / 1.8986
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S620Q
Plate S620Q / 1.8914 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 620
50 100 580
100 150 560
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 700 890
100 150 650 830
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 15
Impact strength (longitudinal)
30J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,025 S: 0,015 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S620Q
EN 10025-1 – 2004
Plate S620Q / 1.8914
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S620QL
Plate S620QL / 1.8927 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 620
50 100 580
100 150 560
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 700 890
100 150 650 830
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 15
Impact strength (longitudinal)
30J at - 40°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S620QL
EN 10025-1 – 2004
Plate S620QL / 1.8927
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029 Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S620QL1
Plate S620QL1 / 1.8987 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 620
50 100 580
100 150 560
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 100 700 890
100 150 650 830
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 15
Impact strength (longitudinal)
30J at - 60°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S620QL1
EN 10025-1 – 2004
Plate S620QL1 / 1.8987
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S690Q
Plate S690Q / 1.8931 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 690
50 100 650
100 150 630
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 770 940
50 100 760 930
100 150 710 900
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 14
Impact strength (longitudinal)
30J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,025 S: 0,015 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S690Q
EN 10025-1 – 2004
Plate S690Q / 1.8931
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S690QL
Plate S690QL / 1.8928 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 690
50 100 650
100 150 630
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 770 940
50 100 760 930
100 150 710 900
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 14
Impact strength (longitudinal)
30J at - 40°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S690QL
EN 10025-1 – 2004
Plate S690QL / 1.8928
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S690QL1
Plate S690QL1 / 1.8988 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 690
50 100 650
100 150 630
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 770 940
50 100 760 930
100 150 710 900
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 14
Impact strength (longitudinal)
30J at - 60°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,65
50 100 0.77
100 150 0.83
Durability Nominal thickness (mm)
Values max (%)
- 150 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S690QL1
EN 10025-1 – 2004
Plate S690QL1 / 1.8988
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S890Q
Plate S890Q / 1.8940 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 890
50 100 830
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 940 1100
50 100 880 1100
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 11
Impact strength (longitudinal)
30J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,72
50 100 0.82
Durability Nominal thickness (mm)
Values max (%)
- - C:0,20 Si: 0,80 Mn: 1,70 P: 0,025 S: 0,015 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S890Q
EN 10025-1 – 2004
Plate S890Q / 1.8940
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S890QL
Plate S890QL / 1.8983 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 890
50 100 830
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 940 1100
50 100 880 1100
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 11
Impact strength (longitudinal)
30J at - 40°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,72
50 100 0.82
Durability Nominal thickness (mm)
Values max (%)
- 100 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S890QL
EN 10025-1 – 2004
Plate S890QL / 1.8983
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S890QL1
Plate S890QL1 / 1.8925 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 890
50 100 830
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 940 1100
50 100 880 1100
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 11
Impact strength (longitudinal)
30J at - 60°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,72
50 100 0.82
Durability Nominal thickness (mm)
Values max (%)
- 100 C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S890QL1
EN 10025-1 – 2004
Plate S890QL1 / 1.8925
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S960Q
Plate S960Q / 1.8941 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 960
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 980 1150
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 10
Impact strength (longitudinal)
30J at - 20°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,82
Durability Nominal thickness (mm)
Values max (%)
- 50 C:0,20 Si: 0,80 Mn: 1,70 P: 0,025 S: 0,015 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S960Q
EN 10025-1 – 2004
Plate S960Q / 1.8941
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
Declaration of Performance (according to regulation EU No 305/2011)
No. LPE Plate S960QL
Plate S960QL / 1.8933 according EN 10025-6
To be used in-welded, bolted and riveted structures
Tata Steel UK Limited Long Products Europe PO Box 1, Brigg Road
Scunthorpe, DN16 1BP Tel: +44 (0)1724 404040
Website : www.tatasteeleurope.com
CE Marking Notified Body
Lloyds Register Verification Limited 71 Fenchurch Street, London, EC3M 4BS
Tel :+44 (0)207 423 2428 Email : [email protected]
Website : www.lr.org
System of assessment and verification of constancy of performance of the product
System 2+
Notified factory production control certification body No. 0038 performed the initial inspection of the manufacturing plant and of
factory production control and the continuous surveillance, assessment, and evaluation of factory production control and issued the certificate of conformity of the factory production
control
1st July 2013
Jon Bolton – Director, Long Products Europe Date Tata Steel UK Limited
Essential
characteristic Performance Harmonised
technical specification
Tolerances on dimensions and
shape
Thickness
Flatness
EN 10029
EN 10029
EN10025-1 2004
Yield strength (transverse)
Nominal thickness (mm)
Values Min (Mpa)
> <=
- 50 960
Tensile strength (transverse)
Nominal thickness (mm)
Values (MPa)
> <= min max
5 50 980 1150
Elongation (transverse)
Nominal thickness (mm)
Values min (%, 5.65√so)
> <=
- - 10
Impact strength (longitudinal)
30J at - 40°C
Weldability CEV Nominal thickness (mm)
Values max (%)
> <=
- 50 0,82
Durability Nominal thickness (mm)
Values max (%)
- - C:0,20 Si: 0,80 Mn: 1,70 P: 0,020 S: 0,010 N: 0,015 B: 0,0050 Cr: 1,50 Cu: 0,50 Mo: 0,70 Nb: 0,06 Ni: 2,0 Ti: 0,05 V: 0,12 Zr: 0,15
0038
Tata Steel
Long Products Europe PO Box 1, Brigg Road
Scunthorpe, UK
13
LPE Plate S960QL
EN 10025-1 – 2004
Plate S960QL / 1.8933
To be used in-welded, bolted and riveted structures
Tolerances on dimensions : Plate EN10029
Elongation : Tensile Strength : Yield Strength : EN10025-6 Impact Strength : Weldability : Durability : Dangerous Substances : No Performance Determined
