DEA GLOBAL SILVER€¦ · 3.9/68 3.9/68 – 2.1 + L/250. 2.1 + L/250 ... 3230 3066. 3066 3091. 936...

DEA GLOBAL SILVER09.XX.08 - 12.XX.10

DATA SHEET

Classic Performance Advantage

2 DEA GLOBAL SILVER 09.xx.08 - 12.xx.10 | DS CMM 036/01 - EN - 07/14

Laser Visible red, class 2, 690 nm

Standoff and depth of FOV 170 ± 30 mm

Width of FOV user selectable 24, 60, 124 mm

Line per second (max) 53 Hz

Temperature range of sensorfor declared accuracy 15 ~ 32 °C

Sensor size L x W x H 134 x 72 x 60,5 mm

Sensor weight 382 g

Probing Error (*) MPEPF(OT) 60 µm

TemperatureCompensation

PerformanceEnvironment

Optional CLIMA CLIMA CLIMA

Standard: 18 ÷ 22 °C

Option CLIMA: 16 ÷ 26 °C


CLIMA: 16 ÷ 26 °C


CLIMA: 16 ÷ 26 °C

Probe Configurationfor performance test

• HP-S-X3C/X5: stylus length 60 mm, tip diameter 5 mm • HP-S-X1C: stylus length 20 mm, tip diameter 5 mm

• HP-S-X1S: without extension, stylus length 50 mm, tip diameter 5 mm• HP-S-X1H: with an extension of 100 mm, stylus length 20 mm, tip diameter 5 mm

• TP200: Standard force module, stylus length 10 mm, tip diameter 4 mm• HP-T: Standard force, stylus length 10 mm, tip diameter 4 mm

• HP-TM: Standard Force Module, stylus length 10 mm, tip diameter 4 mm

Performance data are valid if the following

specifications are met

Standard Temperature Range 18 ÷ 22 °C

Max. air temperature variation 1 °C/h - 2 °C/24h

Max. Spatial Gradient 1 °C/m

CLIMA Temperature Range 16 ÷ 26 °C

Max. air temperature variation 1 °C/h - 5 °C/24h

Max. Spatial Gradient 1 °C/m

Max. Scanning Speed

300 mm/s 300 mm/s 500 mm/s

(*) According to VDI 2617 Part 6.2, October 2005 edition

HP-L-1.6T Laser ProbeTechnical Characteristics

Technical Characteristics

X: Micromachined anodized light alloy extrusion

Y: Integral dovetail guideways, machined into the table

Z: Micromachined anodized light alloy extrusion

Mechanical Frame:

Sliding System: Air bearings on all axes

Measuring System: METALLUR® linear scales. System Resolution: 0.039 μm

Surface Plate: Material: Granite; Part Locking: threaded inserts M8 x 1.25; Flatness: according to DIN 876/III

Temperature Compensation: CLIMA: Multisensor Temperature Compensation Technology, 16 ÷ 26 °C (optional on Classic models)

Ram Counterbalance: Pneumatic, adjustable

Air Supply: Minimum air supply pressure: 0.5 MPa

Air consumption: 150 Nl/min

Environment: Metrological specification temperature range: Standard: 18 ÷ 22 °C and CLIMA: 16 ÷ 26 °C

Operating Temperature: 10 ÷ 40 °C

Relative humidity: 20% - 90 % non condensing

Probe Heads and Sensors: HH-A, HH-AS8, HP-S-X1C, HP-S-X3C, HP-S-X5

TP200, HP-T, HP-TM, HP-S-X1, HP-L-10.6T

Classic Performance Advantage Performance Advantage

DEA GLOBAL Silver 09.xx.08 DEA GLOBAL Silver 12.xx.10

516 516 866 433 866

1000


Performance Verification

Dynamics:

Max. 3D Speed(mm/s)

Max. 3D Accel.(mm/s2) 1700

17001400 (with HP-S-X3C)

43001400 (with HP-S-X3C/X5)

43001400 (with HP-S-X3C/X5)

5 gauges have to be measured 3 times with one probing at each end, in 7 different directions. All measuring results must be within E0.

E0,MPE : maximum permissible error of length measurement

E150,MPE: maximum permissible error of length

R0,MPL: maximum permissible limit of the repeatability range

5 length gauges have to be measured 3 times in the YZ- or XZ plane with opposite styli, mounted 150 mm off the Z spindle axis.

Extreme value of the repeatabi-lity range of the length measu-rement error, calculated by three repeated measurements on each size for a total of 35 values. The 35 repeatability range results must be within the specified R0,MPL.

A precision sphere has to be measured with 25 probings. PFTU is the range of all radii.PFTU = Rmax - Rmin = sphere form. Calibration sphere in the middle of the volume.

PFTU,MPE : maximum permissible single stylus form error

MPETHP/t: maximum permissible scanning probing error

A precision sphere has to be scanned with 4 defined lines. THP is the range of all radii.THP = Rmax - Rmin = sphere form, scanning. Calibration sphere in the middle of the volume.

HP-S-X3C

HH-A, HH-AS/HP-S-X1S, HP-S-1H

HH-A, HH-AS/TP200

HH-A, HH-AS/HP-T, HP-TM

HP-S-X1C


HH-A, HH-AS/HP-T, HP-TM, TP200

E0,MPE/ E150,MPE PFTU,MPE MPETHP/t

GLOBAL Silver Classic

GLOBAL Silver Performance

E0,MPE/ E150,MPE PFTU,MPE MPETHP/t

RO,MPL

SY1 SY2

PY

LY

Z 80

0LZ 2

946

Y

LX 1450

PH

700

DZ

1 94

6

230

DZ

117

LX1 1340

X 800

860160

6066

156 D1

275

140

175

175

D1

15614

010

0 175

175

8080

111

HH-A HH-AS8

09.15.08

09.12.0809.20.08

80

HP-S-X1C HP-S-X3C

80

101

09.12.08

09.15.08

09.20.08

2165

2465

2965

1300

1500

1800

1650

1850

2250

Y LY

455

540

680

1200

1500

2000

1910

2210

2710

PY SY1 SY2 D1

1000

1130

1350

DEA GLOBAL Silver Classic and Performance 09.12.08, 09.15.08, 09.20.08Specifications according to ISO 10360-2:2009, ISO 10360-5:2010 and ISO 10360-4:2000


Models

Strokes

(mm)

Overall Dimen-

sions(mm)

Supports

(mm)

Max. Part

Weight(kg)

Surface Plate

(mm)

CMMWeight

(kg)

100.6

24.4

50.6

ThdInsert

(mm)

32.4

56.4

68.5

92.5

1.8 + L/333

1.8 + L/333

1.9 + L/333

2.1 + L/333

1.8

1.8

1.9

2.0

2.9/45

2.9/45

–

–

101.

5

Probe Configuration

Standard Temperature Range18 ÷ 22 °C

CLIMA Temperature Range16 ÷ 26 °C

2.2 + L/300

2.2 + L/300

2.7 + L/300

2.2

2.2

2.7

3.9/68

3.9/68

–

2.1 + L/250

2.1 + L/250

2.1 + L/250

2.4 + L/250

1.8

1.8

1.9

2.0

2.5 + L/250

2.5 + L/250

2.8 + L/250

2.2

2.2

2.7

2.9/45

2.9/45

–

–

3.9/68

3.9/68

–

1.7

1.7

2.1

2.1

2.0

2.0

2.7

75.4

NOTE: E0, MPE/E150, MPE specifications are to be formally understood as E0,MPE* /E150,MPE* for the case where non-normal CTE material calibrated test lengths are used.

NOTE: ISO 10360-2 test with maximum part weight performed as an option upon request only.

E0,MPE/ E150,MPE PFTU,MPE MPETHP/t E0,MPE/ E150,MPE PFTU,MPE MPETHP/t

RO,MPL

SY1

PH

SY2

PY

LY

Z

LZ

Y

111

HH-A

HH-AS8 HP-S-X3C

88

200

D1

267

146

175

175

D1196

146

175

175

09.15.08 09.12.0809.20.08

LX

DZ

1

PZ11

7

LX1

X

910200

5625

200

2148

6970

88

8888

HP-S-X5

196

09.12.08

09.15.08

09.20.08

900

900

900

1538

1538

1538

1457

1457

1457

2430

2730

3230

3066

3066

3091

936

936

936

1300

1500

1800

2286

2567

3316

X Y Z(a) LX LX1 LY LZ

700

700

725

PH

550

600

700

1100

1200

1450

1200

1500

2000

800

800

800

2030

2330

2830

PY DZ1 SY1 SY2

76

51

126

D1

250

250

275

PZ

101

HP-S-X3C/X5


HH-A, HH-AS/TP200


DEA GLOBAL Silver Advantage 09.12.08, 09.15.08, 09.20.08Specifications according to ISO 10360-2:2009, ISO 10360-5:2010 and ISO 10360-4:2000


Models

Strokes

(mm)

Overall Dimensions

(mm)

Supports

(mm)Max. Part

Weight(kg)

Surface Plate

(mm)

Day-lights(mm)

CMMWeight

(kg)

Thd Insert(mm)

68.5

92.5

32.4

56.4

75.4

91.5

(a) With HP-S-X5 probe head, Z stroke = 665 mmNOTE: ISO 10360-2 test with maximum part weight performed as an option upon request only.



1.4 + L/333

1.4 + L/333

1.9 + L/333

2.1 + L/333

1.4

1.4

1.9

2.0

2.5/45

2.5/45

–

–

1.7 + L/250

1.7 + L/250

2.1 + L/250

2.4 + L/250

1.4

1.4

1.9

2.0

2.5/45

2.5/45

–

–

1.2

1.2

2.1

2.1

Probe Configuration

191.

5


SY1

PH

SY2

PY

LY

Z

LZ

Y

88

111

HH-A

88

HH-AS8 HP-S-X3C

88

101

273D1

146

175

175

D1273

146

175

175

12.30.1012.15.1012.22.10

LX

DZ

1PZ

150

1757

X

1210200

5625

200 200

70 69

LZ1

12.15.10

12.22.10

12.30.10

1200

1200

1200

1838

1838

1838

2880

3580

4380

3431

3406

3431

2307

2282

2307

1173

1173

1173

1800

2250

2250

3792

5679

7587

X Y Z LX LY LZ LZ1

625

600

625

PH

650

800

1000

1300

1630

1980

1500

2200

3000

1000

1000

1000

2480

3180

3980

PY DZ1 SY1 SY2

149

149

24

D1

290

350

380

PZ


RO,MPL

HP-S-X3C


HH-A, HH-AS/TP200


DEA GLOBAL Silver Performance 12.15.10, 12.22.10, 12.30.10Specifications according to ISO 10360-2:2009, ISO 10360-5:2010 and ISO 10360-4:2000

68.5

92.5

32.4

56.4

75.4

66.5

66.5


Models

Strokes

(mm)

Overall Dimensions

(mm)

Supports

(mm)Max. Part

Weight(kg)

Surface Plate

(mm)

Day-lights(mm)

CMMWeight

(kg)

Thd Insert(mm)

Probe Configuration



2.4 + L/333

2.4 + L/333

2.5 + L/333

2.7 + L/333

2.4

2.4

2.5

2.7

4.7/45

4.7/45

–

–

2.8 + L/200

2.8 + L/200

2.8 + L/200

3.1 + L/200

2.4

2.4

2.5

2.7

4.7/45

4.7/45

–

–

1.9

1.9

2.7

2.7


NOTE: ISO 10360-2 test with maximum part weight performed as an option upon request only.

SY1

PH

SY2PY

LY

Z

LZ

Y

88

111

88

88

101

273D1

146

175

175

D1273

146

175

175

12.30.1012.15.1012.22.10

LX

DZ

1

PZ15

0

1757

X

1210200

5625

200 200

70 69

LZ1

12.15.10

12.22.10

12.30.10

1200

1200

1200

1838

1838

1838

2880

3580

4380

3431

3406

3431

2307

2282

2307

1173

1173

1173

1800

2250

2250

3792

5679

7587

X Y Z (a) LX LY LZ LZ1

625

600

625

PH

650

800

1000

1300

1630

1980

1500

2200

3000

1000

1000

1000

2480

3180

3980

PY DZ1 SY1 SY2

149

149

24

D1

290

350

380

PZ

HH-A

HH-AS8 HP-S-X3C

HP-S-X5

88


RO,MPL

HP-S-X3C/H5


HH-A, HH-AS/TP200


DEA GLOBAL Silver Advantage 12.15.10, 12.22.10, 12.30.10Specifications according to ISO 10360-2:2009, ISO 10360-5:2010 and ISO 10360-4:2000

68.5

92.5

32.4

56.4

75.4

66.5

66.5

191.

5

(a) With HP-S-X5 probe head, Z stroke =905 mm, NOTE: ISO 10360-2 test with maximum part weight performed as an option upon request only.


Models

Strokes

(mm)

Overall Dimensions

(mm)

Supports

(mm)Max. Part

Weight(kg)

Surface Plate

(mm)

Day-lights(mm)

CMMWeight

(kg)

Thd Insert(mm)

Probe Configuration



2.1 + L/333

2.1 + L/333

2.5 + L/333

2.7 + L/333

1.8

1.8

2.2

2.6

3.1/45

3.1/45

–

–

2.5 + L/200

2.5 + L/200

2.8 + L/200

3.1 + L/200

1.8

1.8

2.2

2.6

3.1/45

3.1/45

–

–

1.7

1.7

2.7

2.7


7731

79

PORTABLE MEASURING ARMSLASER TRACKERS & STATIONS

WHITE LIGHT SCANNERS

BRIDGE CMMS

ULTRA HIGH ACCURACY CMMSGANTRY CMMS MULTISENSOR & OPTICAL SYSTEMS

HORIZONTAL ARM CMMS

PRECISION MEASURING INSTRUMENTS

SOFTWARE SOLUTIONS

Hexagon Metrology offers a comprehensive range of products and services for all industrial metrology applications in sectors such as automotive, aerospace, energy and medical. We sup-port our customers with actionable measurement information along the complete life cycle of a product – from development and design to production, assembly and final inspection.

With more than 20 production facilities and 70 Precision Centers for service and demonstrations, and a network of over 100 distribution partners on five continents, we empower our customers to fully control their manufacturing processes, enhancing the quality of products and increasing efficiency in manufacturing plants around the world.

For more information, visit www.hexagonmetrology.com

Hexagon Metrology is part of Hexagon (Nordic exchange: HEXA B). Hexagon is a leading global provider of design, measurement and visualisation technologies that enable customers to design, measure and position objects, and process and present data.

Learn more at www.hexagon.com

© 2014 Hexagon Metrology. Part of Hexagon

All rights reserved. Due to continuing product development, Hexagon Metrology reserves the right to change product specifications without prior notice.

Printed in Germany. July 2014

SENSORS

DEA GLOBAL SILVER€¦ · 3.9/68 3.9/68 – 2.1 + L/250. 2.1 + L/250 ... 3230 3066. 3066 3091. 936...

Documents

Transcript of DEA GLOBAL SILVER€¦ · 3.9/68 3.9/68 – 2.1 + L/250. 2.1 + L/250 ... 3230 3066. 3066 3091. 936...