DDL (Data Definition Language)
-
Upload
maryam-oneal -
Category
Documents
-
view
151 -
download
21
description
Transcript of DDL (Data Definition Language)
DDL (Data Definition Language)
Data Definition Language is used
1. to Create an object2. to alter the structure of an object3. to drop an object created
How To Create Table?
• Syntax : create table tablename
(columnname data type(size), columnname data type(size), …);
We should specify unique column name We should specify proper data type along with its width. If the above command is executed successfully the message
“table created” is displayed.
Naming Conventions For Table Name
The table name should adhere strictly to the following norms
First letter should be alphabet Reserve word cannot be used Maximum length for table name is 30 characters Two different tables cannot have same name Underscore, numerals & letters are allowed but not blank space and
Single quotes.
Note:If the user uses double quotes then upper & lower case are not
equivalent.e.g. “info”, “INFO”, “Info” are not same.
Example To Create Table
• Create table client_master
(client_no varchar2(6), name varchar2(15), addr varchar2(25), bal_due number(10,2));
How to view table structure?
Command: descIf user wants to view the table structure above command will achieve the same.
Syntax:Desc (tablename);
Example: desc client_master;
This will display structure of table client_master.
How to Insert Data Into Table?
• Insert Command:Once table is created it remains
skeletal structure unless it is populated with data. The insert command is used to add one or more records to a table.
• Syntax:insert into tablename values(expression,expression,…);
ORinsert into tablename
(columnname, coumnname,…) values(expression,expression,…);
Insert Statement :When inserting a single row of data into a table, the insert
operation, creates a new row in the database table
loads that row with the values passed into all the columns specified
In Insert statement columns & values have one to one relationship. (first value into first column)
If there are exactly same no. of values as per no. of columns & values are in accordance with the way the column were created; then no need to specify column name
If there are less values than the columns in the table then it is mandatory to indicate both the column name & its corresponding value in the insert statement.
(….continued)
While using ‘insert’ values are separated by commas and values having data types char, varchar/varchar2, raw, long, date should be enclosed in the single quotes.
Values must be entered in the same order as they are defined in the table.
• Use Of ‘&’ In Insert Statement
Syntax:Insert into tablename values(‘&expr1’, ‘&expr2’,…..);
Oracle will prompt the user to enter values for specified columns.
• Discussion of example. [email protected]
Viewing Data In The Table
Select Command:
Request for information stored in a table can be done through the select command.(This is generally referred as ‘querying’ the table.)
We can use ‘Select’ to view1. All rows and all columns2. Filtered data
• All Rows And All Columns:Syntax
In order to view global table data the syntax is,select columnname1, columnname2, ……..n from tablename;e.g.select cl_no, name, addr, bal_due from client_master;
OR select * from tablename;
e.g.select * from client_master;
Note: Oracle allows the user to use the meta character asterisk(*), which is expanded by the oracle to mean all columns.
• Filtering Table Data: SQL gives us filtering out data that is not
required. The ways of filtering table data are,
1. selected columns and all rows
2. selected rows and all columns
3. selected columns and selected rows
Note: Oracle engine compiles the sentence, executes it, and retrieves data for all columns/rows from the table.
• selected columns and all rows:It is retrieval of specific columns of a table.
Syntax:select columnname ,columnname
from tablename;Example:
select client_no, namefrom client_master;
• selected rows and all columns
• Oracle provides the option of using where clause in combination with select statement to apply filter on rows.
• Syntax
Select * from tablenamewhere search condition;
ExampleSelect *
from client_master where bal_due>0;
• Where Clause
When where clause added to SQL sentence, the oracle server compares each record from the table with the condition specified in where clause.
Oracle displays only those records that satisfy the specified condition.
Where clause can appear only after from clause.
In search condition all standard operators can be used. (logical, arithmetic, comparison)
• Selected Rows And Selected Columns
It is used to view specific data set from a table .
Syntax: select columnname, columnname
from tablenamewhere search condition;
Example:Select client_no, client_name
from client_master where bal_due>0;
• Elimination Of Duplicates:
To prevent selection of duplicate rows, we include distinct clause in the select statement.
Syntax:select distinct columnname, columnname
from tablename;
The above syntax scans through the values of columns specified and displays unique values from amongst them.
Example:select distinct job from employee;
(….continued)
Syntax:select distinct *
from tablename; The above syntax scans through entire rows, and eliminates rows that
have exactly the same contents in each column.
Example:select distinct * from client_master;This will select only unique row from client_master,
• Sorting Data In a Table
Oracle allows data from a table to be viewed in a sorted order.
The rows retrieved from the table will be sorted in eitherascending or descending order
Ascending or descending order of the data is depends on condition specified in the select clause.
Syntaxselect * from tablenameorder by columnname, columname [sort order];
• Ascending Order:
select * from client_masterorder by client_no;The above query will display all records from client_master
sorted in ascending order as per column client_no.
• Descending Order:For viewing the data in descending order the word ‘desc’ must
mentioned after the column name and before the semi colon in order by clause.
In case there is no mention of sort order in order by clause Oracle engine sorts in ascending order by default.
select client_no, name, addr1, cityfrom client_masterorder by client_no desc;
• Creating a Table From a Table:syntax:
create table tablename[(columnname, columnname)]
as select columnname, columnname from tablename;
Source Table: Source table is that identified in the select clause.Target Table: The target table is one specified In the create statement.
The above SQL statement will populate target table with the data from source table.
• (….continued)
• Example:
create table course(Coursename, Fees, Stud_admit)as select Coursename, Fees, Stud_admit
from college_info;
If the source table college_info was populated with records these will be uploaded in course table.
• How to create table structure from Source Table?
• To create a target table without records from source table (only structure creation) , the select statement should contain a ‘where clause’.
• The condition specified in where clause must not be satisfied.
• Inserting Data Into a Table From Another Table:
Oracle allows to populate a table with data that already exist in another table. (one row at a time into a table).
Insertion of records from one table to another:Syntax:
insert into tablenameselect columnname, columnname
from tablename;
Example:insert into Client_master
select client_name, addrfrom client_info;
Insertion of data set from one table to another:Syntax:
insert into tablenameselect columnname, columnname
from tablename where column=expr;
Example:insert into Client_master
select client_name, addrfrom client_info where client_name=‘Akash’;
• Delete Operations:
The Delete command is used to remove rows from table. We can use delete command for two operations.
1. To delete all the rows from table2. To delete a set of rows.
• Removal of All Rows:Syntax:delete from tablename;Example:delete from client_master;
• (…continued)Removal Of Specified Rows:
Syntax:delete from tablename
where search condition;
Example:delete from client_master
where bal_due<1000;
• Updating Contents Of A Table:
Update command is used to change data values in a table.
We can use update commandTo update all rows from a tableTo update data set of rows from a table
Updating All Rows:
Syntax:update tablename
set columnname=‘expr’;Example:
update client_masterset bal_due=5000; [email protected]
• Updating Records Conditionally: Syntax:
update tablenameset columnname=‘expr’where search condition;
Example:update client_master
set bal_due=5000where client_name=‘Thomus’;[email protected]
• How to Modify Structure Of Table?
We can modify structure of table by,1. Adding new column2. Modifying existing column
To Add New Columns:Syntax:
alter table tablenameadd(newcolumnname datatype(size),…..n);
alter table client_masteradd(client_tele numer(8));
• Modifying Existing Column:
Syntax:
alter table tablename
modify(columnname newdatatype(newsize),…..n);Example:
alter table client_masteradd(client_tele numer(10));
• Restrictions on the Alter Table:
Alter table cannot be performedto change name of the tableto change name of the columnto drop a columnDecrease size of a column if table data exists
• To Rename Tables:
Syntax:
rename oldname to newname;
Example:rename client_master to client_info;
• Destroying Table:
Syntax:drop table tablename;
Example:drop table client_master;
• Examining Objects Created By User:
select * from tab;
This command will display object name and type of object.