D:DATAAMDOORamerican seriesdoor specification · 'rru 6shflilfdwlrq 3djh '225 63(&,),&$7,216 $%6...

$: D:DATAAMDOORamerican seriesdoor specification · 'rru 6shflilfdwlrq 3djh '225 63(&,),&$7,216 $%6 0dqxidfwxulqj 3krqh )d[)/86+ 67$1'$5' 3$57,&/(%2$5' &25(6shflilfdwlrqv 3o\ frqvwuxfwlrq$
DOOR SPECIFICATIONS

ABS - Manufacturing888-454-2888 Phone888-454-2889 Fax

10/1/16Door Specification

Page 1

FLUSH HOLLOW CORE

Specifications: 3 & 5 Ply construction. Meets or exceeds industry standardsof WDMA I.S.1.

Lay Up Method LooseMaximum Sizes: Width - 4/0. Length depends on face (See faces below for

available length)Thickness: 1-3/8" and 1-3/4" ONLY

Stiles: MDF available on MDF type skins, Only 1-3/8" Thickness & 6/8 Length.Softwood available on all skin types 1-3/8" and 1-3/4" Thickness.Width = 1" Nominal, 13/16" Minimum after prefit size.

Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercut

Core: Cellular Honeycomb with 5" Hexagonal cells.Lock Blocks: Double 3" x 20" Particleboard (28lb) as standard.

Faces: Lauan (Okoume) - Raw, 2 ply , 8/0 Max imum.RN Birch - Raw, 2 ply , 1/64" Face veneer thickness, 8/0 Maximum.PS Red Oak - Raw, 2 ply , 1/64" face veneer thickness, 8/0 Max imum.MDF - Primed and Raw, Single Ply , 10/0 Max imum.Embossed MDF - Primed and Prefinished, Single Ply , 8/0 Maximum.

Adhesive: Type-1 PVA, Interior installation only .Machining: To Specification

Lites: To specification. Blocking only upon request.Louvers: To specification. Blocking only upon request.

Acoustical Rating: N/AWarranty: Standard two year. See limited warranty for details.

*No warranty for Telegraphing*Description (FP-1-3/8) = 1-3/8" Thick, MDF Stiles

Abbreviations: (FJ-1-3/8) = 1-3/8" Thick, FJ Softwood Stiles(SWE-1-3/8) = 1-3/8" Thick, Clear Softwood Stiles(FJ-1-3/4) = 1-3/4" Thick, FJ Softwood Stiles(SWE-1-3/4) = 1-3/4" Thick, Clear Softwood Stiles

Recommended Residential and Light CommercialUse:

01


Page 2

DOOR SPECIFICATIONS


MOLDED PANEL HOLLOW CORESpecifications: 3 Ply construction. Meets or exceeds industry standards

of WDMA I.S.1.Lay Up Method Loose

Maximum Sizes: Width - 3/0Length - 8/0 *Certain sty les only*

Thickness: 1-3/8" and 1-3/4" ONLYStiles: MDF on only 1-3/8" Thickness & 6/8 Length.

FJ Softwood option on 1-3/8" and 1-3/4" Thickness, to 8/0 length.Width = 1" Nominal, 13/16" Minimum after prefit size.

Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercut2" Nominal Bottom rail available on 1-3/8 Thickness (DBR)

Core: Cellular Honeycomb build up pads.Lock Blocks: Double 3" x 10" Particleboard (28lb) as standard.

Faces: Primed MDF Molded Panel, Single plyAdhesive: Type-1 PVA, Interior installation only .

Machining: To SpecificationLites: N/A

Louvers: N/AAcoustical Rating: N/A

Warranty: Standard two year. See limited warranty for details.*No warranty for Telegraphing*

Description (FP-1-3/8) = 1-3/8" Thick, MDF StilesAbbreviations: (FJ-1-3/8) = 1-3/8" Thick, FJ Softwood Stiles

(FJ-1-3/4) = 1-3/4" Thick, FJ Softwood StilesRecommended Residential and Light Commercial

Use:02

*See molded skin selection guide for all panel elevation designs.

DOOR SPECIFICATIONS



Page 3

BIFOLDING DOORSSpecifications: Bifolding doors are available in the following door types.

Hollow Core Flush, Hollow Core Molded Panel, Molded Panel EconomyParticleboard Core, Flush Economy Particleboard Core, Flush Standard Particleboard Core

Maximum Sizes: See Specific Door Type.Thickness: See Specific Door Type.

Stiles: 1" WoodRails: 1-5/8" Wood on 1-3/8" Thickness.

2-1/4" Wood on 1-3/4" Thickness.Core: See Specific Door Type.

Lock Blocks: See Specific Door Type.Faces: See Specific Door Type.

Adhesive: Type-1 PVA, Interior installation only .Machining: N/A

Lites: N/ALouvers: N/A

Acoustical Rating: N/AWarranty: Standard two year. See limited warranty for details.( See Specific Door Type)

Description See Specific Door Type.Abbreviations:


Hardware: US 15 Hinges - Edge mount window hinge on Hollow Core3-1/2" full mortise hinge on Solid CoreStandard Duty Track & Hardware - Stanley #2900 Series.Heavy Duty Track & Hardware - Stanley #2700 Series.

03* All bifolds are boxed with track and hardware. Non boxed ( bulk packaging)available on request.


Page 4

DOOR SPECIFICATIONS


MOLDED PANEL "ECONOMY" PARTICLEBOARD CORESpecifications: 3 Ply construction. Meets or exceeds industry standards

of WDMA I.S.1.Lay Up Method Loose

Maximum Sizes: Width - 3/0Length - 8/0 *Certain sty les only*

Thickness: 1-3/8" and 1-3/4" ONLYStiles: FJ Softwood

Width = 1" Nominal, 13/16" Minimum after prefit size.Rails: 1-3/8" Thickness = MDF, 1-5/8" Nominal, 1" Minimum after undercut

1-3/4" Thickness = MDF, 2-1/4" Nominal, 1" Minimum after undercutCore: 28-30lb Particleboard, ANSI A208.1 Grade LD-1, Profiled

Fire Rating: 1-3/4" Thickness 20 Minute Rated**Faces: Primed MDF Molded Panel, Single ply



Acoustical Rating: 33 STC Inoperable Warranty: Standard two year. See limited warranty for details.

Description E-1-3/8 = 1-3/8" Thick PBC Molded PanelAbbreviations: E-20NL = 1-3/4" Thick PBC Molded Panel ( Non-rated)

E-20NP = 1-3/4" Thick PBC Molded Panel, 20 Minute Neutral PressureE-20B = 1-3/4" Thick PBC Molded Panel, 20 Minute Category BE-20A = 1-3/4" Thick PBC Molded Panel, 20 Minute Category A


04* See molded skin selection guide for all panel elevation designs.**See f ire door specif ications section in catalogue for details on sizes, hardw are and construction limitations.

DOOR SPECIFICATIONS



Page 5

FLUSH "ECONOMY" PARTICLEBOARD CORESpecifications: 3 & 5 Ply construction. Meets or exceeds industry standards of WDMA

I.S.1; All 20 Minute doors have been tested in conformance to the followingstandards. ASTM-E-152,CSFM-43.7,CAN4-S104,NFPA-252, UBC-7-2-97,UL-10C

Lay Up Method LooseMaximum Sizes: Width - 4/0

Length - Depends on faces (See faces below for available length)Thickness: 1-3/8" and 1-3/4" ONLY

Stiles: Softwood (Fir, Pine, Spruce, SCL) Mill optionWidth = 1" Nominal, 13/16" Minimum after prefit size.


Core: 28-30lb Particleboard, ANSI A208.1 Grade LD-1Fire Rating: 1-3/4" Thickness 20 Minute Rated*

Faces: Raw only Lauan (Okuome) 2 Ply, 8/0 Max length.Raw only RN Birch 2 Ply, MDF Back, 1/64" Face Veneer, 8/0 Max lengthRaw only PS Red Oak 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max lengthRaw MDF Single Ply , 10/0 Max lengthPrimed MDF Single Ply , 10/0 Max lengthEmbossed Primed MDF Single Ply , 8/0 Max lengthEmbossed Prefinished MDF (Legacy) Single Ply , 8/0 Max length

Adhesive: Type-1 PVA, Interior installation only.Machining: To Specification

Lites: To SpecificationLouvers: To Specification

Acoustical Rating: 32 STC Operable See www.doormerica.com for seal information

Warranty: Standard Two year. See limited warranty for details.Description E-1-3/8 = 1-3/8" Thick PBC

Abbreviations: E-20NL = 1-3/4" Thick PBC, Non RatedE-20NP = 1-3/4" Thick PBC, 20 Minute Neutral PressureE-20B = 1-3/4" Thick PBC, 20 Minute Category BE-20A = 1-3/4" Thick PBC, 20 Minute Category A


05*See fire door specif ications section in catalogue for details on sizes, hardw are and construction limitations.


Page 6

DOOR SPECIFICATIONS


FLUSH "STANDARD" PARTICLEBOARD CORESpecifications: 3, 5 Ply construction. Meets or exceeds industry standards of WDMA

I.S.1; All 20 Minute doors have been tested in conformance to the followingstandards. ASTM-E-152,CSFM-43.7,CAN4-S104,NFPA-252, UBC-7-2-97,UL-10C

Lay Up Method LooseMaximum Sizes: Width - 4/0


Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = Matching HardwoodP-lam = SCL with matching edge banding overCAT-A = Special CAT-A Stile with matching edge banding overWidth = 1" Nominal, 13/16" Minimum after prefit size.Hardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)


Core: 28-30lb Particleboard, ANSI A208.1 Grade LD-1Fire Rating: 1-3/4" Thickness 20 Minute Rated*

Faces: RN Birch 2 Ply, MDF Back, 1/64" Face Veneer, 8/0 Max lengthPS Red Oak 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max lengthRaw MDF Single Ply , 10/0 Max lengthPrimed MDF Single Ply , 10/0 Max lengthPrimed MDO 2 Ply HDF Back, 10/0 Max lengthSelect Species Raw & Prefinished 2 Ply , 1/42" Face, 10/0 Max lengthPlastic Laminate 2 Ply , 1/50" Face, 10/0 Max length. All laminates meet orexceeds NEMA standards.



Acoustical Rating: 32 STC Operable See www.doormerica.com for seal informationWarranty: Standard two year. See limited warranty for details.

Description S-1-3/8 = Standard 1-3/8" Thick PBCAbbreviations: S-20NL = Standard 1-3/4" Thick PBC, Non Rated

S-20NP = Standard 1-3/4" Thick PBC, 20 Minute Neutral PressureS-20B = Standard 1-3/4" Thick PBC, 20 Minute Category BS-20A = Standard 1-3/4" Thick PBC, 20 Minute Category A


06*See fire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.

DOOR SPECIFICATIONS



Page 7

FLUSH "HEAVY DUTY" PARTICLEBOARD CORESpecifications: 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,

WI Section 12, AWI Section 1300 Custom Grade ( A Grade Faces), AWI Section1300 Premium Grade ( AA Grade Faces). All 20 Minute doors have beentested in conformance to the following standards. ASTM-E-152, CSFM-43.7,CAN4-S104, NFPA-252, UBC-7-2-97, UL-10C

Lay Up Method Bonded and SandMaximum Sizes: Width - 4/0


Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = Matching HardwoodP-lam = SCL with matching edge banding overCAT-A = Special CAT-A Stile with matching edge banding overWidth = 1-3/8" MinimumHardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)

Rails: 1-3/8" Thickness = Wood or SCL 1-1/8" Minimum 1-3/4" Thickness = Wood or SCL 1-1/8" Minimum

Core: 34lb Particleboard, ANSI A208.1 Grade LD-2Fire Rating: 1-3/4" Thickness 20 Minute Rated*

Faces: Primed MDO 2 Ply HDF Back, 10/0 Max lengthSelect Species Raw & Prefinished 2 Ply , 1/42" Face, 10/0 Max lengthPlastic Laminate 2 Ply, 1/50" Face, 10/0 Max length. All laminates meet orexceed NEMA standards.

Adhesive: Type-1 PVA, Interior installation only.Machining: To Specification


Acoustical Rating: 33 STC Operable See www.doormerica.com for seal informationWarranty: Lifetime. See limited warranty for details.

Description HD-1-3/8 = Heavy Duty 1-3/8" Thick PBCAbbreviations: HD-20NL = Heavy Duty 1-3/4" Thick PBC, Non Rated

HD-20NP = Heavy Duty 1-3/4" Thick PBC, 20 Minute Neutral PressureHD-20B = Heavy Duty 1-3/4" Thick PBC, 20 Minute Category BHD-20A = Heavy Duty 1-3/4" Thick PBC, 20 Minute Category A

Recommended ArchitecturalUse:



Page 8

DOOR SPECIFICATIONS


FLUSH "EXTRA HEAVY DUTY"STRUCTURAL COMPOSITE CORE

Specifications: 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,WI Section 12, AWI Section 1300 Custom Grade( A Grade faces),AWI Section 1300 Premium Grade (AA Grade Faces). All 20 and 45 Minutedoors have been tested in conformance to the following standards. ASTM-E-152CSFM-43.7, CAN4-S104, NFPA-252;UBC-7-2-97, UL-10C

Lay Up Method Bond and SandMaximum Sizes: Width - 4/0


Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = Matching HardwoodP-lam = SCL with matching edge banding overCAT-A = Special CAT-A Stile with matching edge banding overWidth = 1-3/8" MinimumHardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)

Rails: 1-3/8" Thickness = Wood or SCL 1-1/8" Minimum 1-3/4" Thickness = Wood or SCL 1-1/8" Minimum

Core: Structural Composite Lumber (Engineered), Grade LD-2Fire Rating: 1-3/4" Thickness 20 Minute Rated*; 1-3/4" Single Swing 45 Minute rated**

Faces: Primed MDO 2 Ply HDF Back, 10/0 Max lengthSelect Species Raw & Prefinished 2 Ply , 1/42" Face, 10/0 Max lengthPlastic Laminate 2 Ply , 1/50" Face, 10/0 Max length. All laminates meet orexceed NEMA standards.



Acoustical Rating: 34 STC Operable See www.doormerica.com for seal informationWarranty: Lifetime. See limited warranty for details.

Description EHD-1-3/8 = Extra Heavy Duty 1-3/8" Thick SCLAbbreviations: EHD-20NL = Ex tra Heavy Duty 1-3/4" Thick SCL, Non Rated

EHD-20NP = Extra Heavy Duty 1-3/4" Thick SCL, 20 Minute Neutral PressureEHD-20B = Extra Heavy Duty 1-3/4" Thick SCL, 20 Minute Category BEHD-20A = Extra Heavy Duty 1-3/4" Thick SCL, 20 Minute Category AEHD-45NP = Extra Heavy Duty 1-3/4" Thick SCL, 45 Minute Neutral Pressure **EHD-45B = Extra Heavy Duty 1-3/4" Thick SCL, 45 Minute Category B **EHD-45A = Extra Heavy Duty 1-3/4" Thick SCL, 45 Minute Category A **

Recommended Architectural, InstitutionalUse:

08*See fire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.** Single Sw ing only on 45 Minte Fire Rated; Max size 4/0 8/0

DOOR SPECIFICATIONS



Page 9

FLUSH "SOUND RETARDANT DOOR"Specifications: 3 & 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,

WI Section 12, AWI Section 1300 Custom Grade( A Grade faces),AWI Section 1300 Premium Grade (AA Grade Faces).


Length - 8/0Thickness: 1-3/4" ONLY

Stiles: Paint Grade = FJ Hardwood, Raw Stain Grade = Matching HardwoodPrefinished = SCL with matching edge banding overP-lam = SCL with matching edge banding overWidth = 1-3/8" MinimumHardwood stiles are 2 ply . Matching hardwood by Poplar or SCL (mill option)

Rails: 1-3/4" Thickness = Wood, SCL 1-1/8" Minimum Core: STC 42: RIGICOREGPCore: STC 45: RIGICOREEX

Fire Rating: N/AFaces: Primed MDO 2 Ply HDF Back,

Select Species Raw & Prefinished 2 Ply , 1/42" Face, Plastic Laminate 2 Ply , 1/50" Face, . All laminates meet orexceed NEMA standards.


Lites: STC 39 Max Lite kit 22x36 - See www.doormerica.com for kit and glass detailsLouvers: N/A

Acoustical Rating: 43 STC Operable - Nonrated and 20 Min Fire45 STC Operable - Nonrated, 20 Min Fire, and 45 Min FireSee www.doormerica.com for seal information

Warranty: Lifetime. See limited warranty for details.STC Opening Varies. See www.doormerica.com for seal informationComponents

Recommended Architectural, InstitutionalUse:



Page 10

DOOR SPECIFICATIONS


FLUSH MINERAL CORE 45-60-90 MINUTE RATEDSpecifications: 3, 5 Ply construction. Meets or exceeds industry standards of WDMA I.S.1-A,

WI Section 12, AWI Section 1300. Testing Standards ASTM-E-152, CSFM 43.7CAN4-S104, NFPA-252, UBC-7-2-97, UL10C


Length - Depends on faces (See faces below for available length)Thickness: 1-3/4" Only

Stiles: Laminated Composite to wood (Georgia Pacific), Specific to rating*Edge banding veneer or plastic when matching edges required

Rails: Laminated Composite to wood (Georgia Pacific), Specific to rating*Width = 1" Minimum

Core: Gypsum MineralFire Rating: 45-60-90 Minute Rated*

Faces: RN Birch 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max length.Light Commercial PS Red Oak 2 Ply , MDF Back, 1/64" Face Veneer, 8/0 Max length.

Raw MDF Single Ply, 10/0 Max length Primed MDF Single Ply , 10/0 Max length Embossed Primed MDF Single Ply, 8/0 Max length Embossed Prefinished MDF (Legacy) Single Ply , 8/0 Max length

Faces: Primed MDO 2 Ply HDF Back, 10/0 Max lengthArchitectural Select Species Raw & Prefinished 2 Ply, 1/42" Face, 10/0 Max length

Plastic Laminate 2 Ply , 1/50" Face, 10/0 Max length. All laminates meet orexceed NEMA standards.



Temp Rise: 30 Minutes 250 Degrees max imum.Acoustical Rating: 30 STC Operable See www.doormerica.com for seal information

Warranty: Lifetime. See limited warranty for details.Description MC-45NP = Mineral Core 45 Minute, Neutral Pressure

Abbreviations: MC-45B = Mineral Core 45 Minute, Category BMC-45A = Mineral Core 45 Minute, Category AMC-60NP = Mineral Core 60 Minute, Neutral PressureMC-60B = Mineral Core 60 Minute, Category BMC-60A = Mineral Core 60 Minute, Category AMC-90NP = Mineral Core 90 Minute, Neutral PressureMC-90B = Mineral Core 90 Minute, Category BMC-90A = Mineral Core 90 Minute, Category A

Recommended Architectural, Light CommercialUse:

09*See f ire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.

DOOR SPECIFICATIONS



Page 11

MOLDED PANEL MINERAL CORE 45-60 MINUTE RATEDSpecifications: 3 Ply construction. Meets or exceeds industry standards of WDMA I.S.1

Testing Standards ASTM-E-152, CSFM 43.7,CAN4-S104, NFPA-252, UBC-7-2-97, UL10C


Length - 7/0Thickness: 1-3/4" ONLY

Stiles: Laminated Composite to wood (Georgia Pacific), Specific to rating*Rails: Laminated Composite to wood (Georgia Pacific), Specific to rating*

Width = 1" MinimumCore: Gypsum Mineral

Fire Rating: 45-60 Minute Rated*Faces: Primed Molded Panel Single Ply



Temp Rise: 30 Minutes 250 Degrees max imum.Acoustical Rating: 20 STC Opearble (No Seal)

29 STC Operable (With seal / Pemko S773)Warranty: Standard Two year. See limited warranty for details.

Description MC-45NP = Mineral Core 45 Minute, Neutral PressureAbbreviations: MC-45B = Mineral Core 45 Minute, Category B

MC-45A = Mineral Core 45 Minute, Category AMC-60NP = Mineral Core 60 Minute, Neutral PressureMC-60B = Mineral Core 60 Minute, Category BMC-60A = Mineral Core 60 Minute, Category A

Recommended Light CommercialUse:

10*See f ire door specif ications section in catalogue for details on sizes, hardw areand construction limitations.


Page 12

DOOR SPECIFICATIONS


WOOD VISION LITE KITSNON RATED

PRODUCT FEATUES:Use For use with non rated doors.Species Available Birch, Cherry, Mahogany, Maple, Red Oak, Walnut and White Oak.Sizes Various sizes available in full-inch increments up to maximum area / size listed below.Listed ITS.Glass size Glass should be cut 1/8" less in length and width than wood beaded lite size ordered.Parts List (1) one instruction sheet.

(8) eight prefit wood beads with nails pre-fitted into the lite opening.(1) one tube of silicone caulk or glazing tape. (EPDM or Norton V990) supplied with glass by glazers.

GLASS

DOOR

12

316

FULL LIP BEAD W-7

GLASS

DOORFLUSH BEAD W-9

38

DOOR SPECIFICATIONS



Page 13

METAL VISION LITE KITS


Page 14

DOOR SPECIFICATIONS


METAL LOUVER KITS

DOOR SPECIFICATIONS



Page 15

STC METAL VISION LITE KITS


Page 16

DOOR SPECIFICATIONS


TECHNICAL DATAThe LEED (Leadership in Energy and Environmental Design) Green Building Rating System wasoriginally developed by the U.S. Green Building Council (USGBC) to provide a recognized standard forthe construction industry to assess the environmental sustainability of building designs.

ABS Manufacturing is committed to engineering our manufacturing processes so that we may assistour customers in achieving their LEED certification rating. The chart below lists all of our product linesand what total LEED credits can be earned.

LEED LEED CriteriaCredit

ExtraMaterials & Resources Hollow Economy Standard Heavy Duty Heavy Duty Mineral STC

PBC Core PBC Core PBC Core SCL Core Core CoreMR 4 Recycled Content: 10% YES YES YES YES No No No

Pre-ConsumerMR 4 Recycled Content: 20% YES YES YES YES No No No

Pre-ConsumerMR 5 Regional materials: 10% YES* YES* YES* YES* YES* YES* No

if within 500 milesMR 5 Regional materials: 20% YES* YES* YES* YES* YES* YES* No

if within 500 milesMR 6 Rapidly Renewable No No No No No No No

Materials:MR 7 FSC Certified Wood: No No No No YES YES No*Location of project determines eligibility. Extracted and Manufactured, Harvested or Recovered w ithin 500 mile radius of project site.

Indoor Environmental QualityIEQ 4.1 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**

Adhesives & SealantsIEQ 4.2 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**

Paints & CoatingsIEQ 4.4 No Added Urea YES YES YES YES YES YES YES

FormaldehydeIEQ 9 Acoustical Rating No No No No No No Yes**IEQ 4.1 & 4.2 applies to adhesives, sealants, paints and coatings applied at project site.

Innovation in DesignID 2 LEED AP YES YES YES YES YES YES YES

11

Product Lines - Standard Construction

DOOR SPECIFICATIONS



Page 17

TECHNICAL DATAThe LEED (Leadership in Energy and Environmental Design) Green Building Rating System wasoriginally developed by the U.S. Green Building Council (USGBC) to provide a recognized standard forthe construction industry to assess the environmental sustainability of building designs.

ABS Manufacturing is committed to engineering our manufacturing processes so that we may assistour customers in achieving their LEED certification rating. The chart below lists all of our productlines and what total LEED credits can be earned.

LEED LEED CriteriaCredit

ExtraMaterials & Resources Hollow Economy Standard Heavy Duty Heavy Duty Mineral STC

PBC Core PBC Core PBC Core SCL Core Core CoreMR 4 Recycled Content: 10% YES YES YES YES No No No

Pre-ConsumerMR 4 Recycled Content: 20% YES YES YES YES No No No

Pre-ConsumerMR 5 Regional materials: 10% YES* YES* YES* YES* YES* YES* No

if within 500 milesMR 5 Regional materials: 20% YES* YES* YES* YES* YES* YES* No

if within 500 milesMR 6 Rapidly Renewable No YES YES YES No No No

Materials:MR 7 FSC Certified Wood: No YES YES YES YES No No*Location of project determines eligibility. Extracted and Manufactured, Harvested or Recovered w ithin 500 mile radius of project site.

Indoor Environmental QualityIEQ 4.1 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**

Adhesives & SealantsIEQ 4.2 Low Emitting Materials: YES** YES** YES** YES** YES** YES** YES**

Paints & CoatingsIEQ 4.4 No Added Urea YES YES YES YES YES YES YES

FormaldehydeIEQ 9 Acoustical Rating No No No No No No YES **IEQ 4.1 & 4.2 applies to adhesives, sealants, paints and coatings applied at project site.

Innovation in DesignID 2 LEED AP YES YES YES YES YES YES YES

12

Product Lines - With Special Ordered Materials*Minimum quantities and special lead times will apply

D:DATAAMDOORamerican seriesdoor specification · 'rru 6shflilfdwlrq 3djh '225 63(&,),&$7,216 $%6...

Documents

Transcript of D:DATAAMDOORamerican seriesdoor specification · 'rru 6shflilfdwlrq 3djh '225 63(&,),&$7,216 $%6...