DCSE2000 Network Foundation Answers

5
The following are topologies that can be utilized on a LAN network. Select all that apply. Hierarchy Cyclical Bus Daisy Chain Ring Dell-PowerConnect switches support up to 25GE and an optimized iSCI performance. True False One oft he key functions of switches ist o create point-to-point connections for each communication and provide optional bandwidth. True False A Cat 5 cable consists of three twisted pairs of copper wire terminated by RJ45 connectors. True False A Data Centre is a solution for a customer who needs cost effective performance to mee heavy converged video, voice and data. True False

description

dell dcse 2000 certs lösung

Transcript of DCSE2000 Network Foundation Answers

Page 1: DCSE2000 Network Foundation Answers

The following are topologies that can be utilized on a LAN network. Select all that apply.

Hierarchy

Cyclical

Bus

Daisy Chain Ring

Dell-PowerConnect switches support up to 25GE and an optimized iSCI performance.

True

False

One oft he key functions of switches ist o create point-to-point connections for each communication and provide optional bandwidth.

True

False

A Cat 5 cable consists of three twisted pairs of copper wire terminated by RJ45 connectors.

True

False

A Data Centre is a solution for a customer who needs cost effective performance to mee heavy converged video, voice and data.

True

False

Page 2: DCSE2000 Network Foundation Answers

The Dell-Force10 E-Series is for customers with very large datacenters that need very dense core level aggregation of both top-pf-rack and other chassis switches.

True

False

The N-Series adds complexity tot he portfolio by separating families (alternate PowerConnect switches).

True

False

The 62xx-Series is great for wiring closes aggregation layer for large networks o ras a core switch in a small business or branch office.

True

False

FTOS offers the following. Select all that apply.

Open architectures

Proven response time

Open ecosystems

Familiar configuration experience

Multi-mode optical fiber is:

Used for longer distances

Used for shorter distances

Used for shorter and longer distances

Is used for extra-long distances

Page 3: DCSE2000 Network Foundation Answers

When replacing FRAU components, one safety precaution ist o disconnect the system and any attached peripherals from AC power, and then remove the battery.

True

False

In the event of a fan tray failure, the entire fan tray must be replaced.

True

False

Beforce you supply power tot he chassis, it is recommended you re-inspect the equipment rack and chassis.

True

False

Before you begin the installation process, make sure the area where you intend to install the switch meets which oft he following safety requirements:

Select all that apply.

In a dry, clean, well-ventilated and temperature-controlled room, away from nearby heat sources.

Away from sources of severe electromagnetic noise.

Near and adequate power source.

Means of power disconnect can be located at a distance of 5000 feet.

You can power the system with both types of power supply modules (AC and DC) installed.

True

False

Page 4: DCSE2000 Network Foundation Answers

When installing and SFM, it is important to install from the right-most slot tot he left-most slot.

True

False

Some platforms have two console management ports available for system access: a ping port and a serial console port.

True

False

In FTOS, after a command is enabled, it is entered into the running configuration file.

True

False

Trace logging is a critical debugging tool that uses the following commands. Select all that apply.

Debug cpu-traffic-stats

Show console lp

Debug hardware rpm

Show hardware linecard fpga

Loopback Message and Response (LBM, LBR) is also called a Layer 4 Ping.

True

False

Page 5: DCSE2000 Network Foundation Answers