dcrust
-
Upload
justin-lowe -
Category
Documents
-
view
356 -
download
0
description
Transcript of dcrust
-
PROSPECTUS FOR ADMISSIONTO
POST GRADUATE(P.G.) AND Ph.D. PROGRAMMES
2014-15
DEENBANDHU CHHOTU RAMUNIVERSITY
OF SCIENCE AND TECHNOLOGY [A State University established under Haryana Legislature Act No. 29 of 2006 and
recognised under 12(B) of the UGC Act, 1956]
MURTHAL, SONEPAT 131039 (HARYANA)
www.dcrustm.org
-
Deenbandhu Chhotu Ram (November 24, 1881 January 09, 1945)
Born on 24th November, 1881 in Garhi Sampla (a village in old Rohtak District) in the family of Ch. Sukhi Ram and Mrs. Sirya Devi, Deenbandhu Chhotu Ram was a renowned educationist and named as the father of reforms for farmers and downtrodens. He established Jat Anglo Sansthan on 26th March, 1913 after completion of his graduation in Law. In pre-independent Combined Punjab, he was as Development Minister from 1937 to 1945. He was conferred with prestigious awards like Rai Bahadur (1919), Deenbandhu (1942), Rehbar-e-azam (1944). Besides being a luminary figure who made substaintial reforms for agriculture and education, he was involved in various developmental projects and policy formulations, including the important Bhakhra Nangal Hydroelectric Power Project.
The Government of Haryana has named the University after this illustrious son of the soil. His humanitarian achievements inspire and motivate everyone to work sincerely with dedication for the inclusive growth and overall progress of the nation.
-
My dear students and esteemed colleagues,
It is my proud privilege to be Vice Chancellor of the young and rapidly progressing Deenbandhu Chhotu
Ram University of Science and Technology, Murthal (Sonepat). The university has prime location on
National Highway No. 1, in close proximity to the National capital, New Delhi. Nearly 8 years ago, the
prestigious engineering college of 20 years standing with 273 acre sprawling green campus was
upgraded to the State University under Haryana Legislature Act No. 29 of 2006. In a short span of time,
the University has made its mark in the region and is recognised under 12 (B) of the UGC Act, 1956.
With 16 departments, the university is imparting education in the areas of Engineering, Science,
Management, Humanities and Architecture at UG, PG and Ph.D. level on the campus. Besides, professional
colleges of Sonepat district affiliated to the university are our extended family. In the modern
technological era, e-learning and e-governance are essential ingredients to keep pace with the fast
growing global economy. From the coming academic session 2014-15, we are starting with online
admissions for PG and Ph.D. programmes. Applicants can submit online applications by accessing the
university website from anywhere in the country and abroad.
We, at the University, are very conscious of the fact that the students are the key stake holders. Our focus
in teaching, research and development is essentially student-centric. The interest of students is of prime
importance to us, so much so that, now students are welcome to see Vice Chancellor anytime without
taking prior appointments.
Creation of knowledge through research and development in the frontier areas, in addition to giving
quality education, to the students is of great importance for the University. We are very much aware of it
and are giving thrust to research and development activities. Growth of knowledge is very fast in the
modern era and hence, faculty and the staff members are encouraged to keep abreast with the
contemporary knowledge. Teaching and research laboratories are regularly updated to cater to the
needs of the students at all levels. Faculty is the backbone of any teaching and research institution for
pursuing quality and excellence, and so is the teaching faculty in our University. Well qualified and
faculty and staff members of the University work towards achieving quality and excellence in higher
education.
Inclusive growth of the society is important for the overall development of our great country. We are
consciously pursuing this goal on the campus through programmes of social relevance. The university
has made a humble beginning to reach out to the under privileged, especially the children of labour class
and other weaker sections of the society. SAVERA is one such initiative where the university students
teach voluntarily the children of labourers working on the university campus and those coming from the
adjoining areas. We would like to extend and expand such activities beyond the university campus.
I am confident that we all together will continue our accelerated pace to ensure and upgrade quality with
visionary approach for excellence. For us, education is not just merely to earn a degree but it is an
attitude and aptitude, a way of life.
I extend my hearty welcome to all those who would join the university afresh in the coming session and
to those who would continue in the next semesters.My best wishes to one and all !
Dr. R.P. Dahiya
Professor
Vice Chancellor
-
Chancellor
His Excellency Sh. Jagannath Pahadia
Hon'ble Governor of Haryana
Vice Chancellor
Prof. R. P. Dahiya
-
SENIOR OFFICIALS
Shri R.K. Arora
Registrar
0130-2484005
Dr. Mahabir Singh Dhankhar
Controller of Examinations Controller of Finance(additional Charge)
0130-2384006
Dr. B.P. Singh
Dean, Academic Affairs
0130-2484024
Dr. J.S. Saini
Dean of Colleges
0130-2484060
Dr. B.P. Malik
Proctor
0130-2484090
Dr. Rajbir Singh
Chief Warden (Boys Hostels)
0130-2484126
Dr. Anita Singroha
Chief Warden (Girls Hostels)
0130-2484137
Dr. Dhirendra Singhal
Dean Students Welfare
0130-2484200
Dr. Raj Kumar
DeanFaculty of Engineering and Technology
0130-2484125
Dr. P. K. Bhatia
Dean Faculty of Science and Technology Interface
0130-2484121
Dr. Chitrarekha Kabre
Dean Faculty of Architecture,Urban and Town Planning
0130-2484010
Dr. Rajiv Kumar
Dean Faculty of Information Technology & Computer Science
0130-2484137
Dr. D.P. Tiwari
Dean Faculty of Non Conventional Sources of Energy and Environmental Science
0130-2484123
Dr. Rekha
Dean Faculty of Management Studies
0130-2484028
Dr. S. C. Gera
Librarian
0130-2484158
Dr. Virender Ahlawat
Training & Placement Officer
0130-2484129
-
Preamble
The information given in this Prospectusis meant for the students and other stake holders. The
instructions with regard to admissions are the guidelines and do not restrict the university in
framing further guidelines/regulations in this respect. The instructions which are issued or may be
issued in furtherance of admission process will also be made applicable. If for any issue/matter,
where the rules/regulations aresilentand/or need clarification, the decision of Vice-Chancellor of the
University shall be final and binding. The Prospectusdoes not contain exhaustive detail of all the
rules and regulations of the University.
Disclaimer
At the time of the publication of this Prospectus,care has been taken to ensure that the information
published and printed is correct. However, any addition, deletion, change or alteration in the
provisions/instructions/regulations,if made by the University at a later date, shall be applicable to
the admissions to various programmes. If any candidate suffers loss or inconvenience due to such
modifications, the University shall not be responsible in any manner whatsoever.
Jurisdiction
All the disputes shall be under the jurisdiction of District Sonepat.
-
DEPARTMENTS/ CENTRES AND THEIR CHAIRPERSONS/ HEADS
S.No. Name of Department/Centre Chairperson/Head Telephone No.
1. Architecture Dr. Chitrarekha Kabre 2484010
2. Biomedical Engineering Dr. Manoj Duhan 2484201
3. Civil Engineering Dr. DhirenderSinghal 2484147
4. Electrical Engineering Dr. D.K.Jain 2484124
5. Electronics & Communication Engineering Dr. Amit Garg 2484146
6. Mechanical Engineering Dr. Rajender Singh 2484125
7. Computer Science & Engineering Dr.Anita Singhrova 2484137
8. Humanities Ms. Tript Lata 2484028
9. Management Studies Dr. Rajbir Singh 2484126
10. Centre of Excellence for Energy & Environmental Studies
Dr. J.S. Rana 2484136
11. Biotechnology Dr. J.S. Rana 2484128
12. Chemical Engineering Dr. D. P. Tiwari 2484123
13. Chemistry Dr. Pratibha Chaudhary 2484148
14. Materials Science & Nano-technology Dr. A.K. Sharma 2484182
15. Mathematics Dr. S.K. Garg 2484121
16. Physics Dr. S.K. Singh 2484127
HOSTELS
Chief Warden (Boys Hostels) Dr. Rajbir Singh
Boys Hostels Warden
K.S. Krishnan Hall Sh. Sukhdeep Singh
Chandrashekhar Hall Dr. Suresh Verma
Hargobind Khurana Hall Sh. Mridul Chawla
Aryabhatt Hall Sh. Gyanendra Singh
Chief Warden (Girls Hostels) Dr.Anita Singhrova
Girls Hostels Warden
Gargi Hall Mrs. Poonam Sheoran
Kalpana Chawla Hall Mrs. Suman Sangwan
Mother Teresa Hall Dr. Sudesh Chowdhary
-
CONTENTS
Chapter No. Description Page No.
1. About the University 1-7
2. Faculties, Teaching Departments and Academic Programmes at a Glance 8-9
3. Faculties & Departments 10-24
(i) Department of Architecture 10 (ii) Department of Biomedical Engineering 11 (iii) Department of Civil Engineering 11 (iv) Department of Electrical Engineering 12-13 (v) Department of Electronics & Communication Engineering 14 (vi) Department of Mechanical Engineering 15 (vii) Department of Computer Science & Engineering 16 (viii) Department of Humanities 17
(ix) Department of Management Studies 18 (x) Centre of Excellence for Energy and Environmental Studies 19 (xi) Department of Biotechnology 20 (xii) Department of Chemical Engineering 21
(xiii) Department of Chemistry 21 (xiv) Department of Materials Science & Nano-Technology 22 (xv) Department of Mathematics 23 (xvi) Department of Physics 24
Post Graduate Programmes
4. Programmes and eligibility 25-32
5. Online filling of application form 33
6. Entrance test
34-37
7. Fee structure/Fee concession/Scholarships 38-41
8. Distribution of seats for PG/Ph.D programmes 42-43
9. Academic calendar 44-47
10. Syllabi/Course content for entrance test 48-62
11. Counseling and admission
63-64
12. Schedule of events
65-67
13. General instructions 68-69
14. Code of conduct 70-71
15. Anti ragging guidelines 72-73
-
Information for Admission to Ph.D. Programmes 2014-15
1. Award of Degree of Doctor of Philosophy by Faculty of the University 74
2. Board of Post Graduate Studies and Research
3. Eligibility for Admission
4. Admission Process
5. Registration 76
6. Course Work
7. Continuation of Registration 78
8. Research Plan Presentation
9. Departmental Research Committee (DRC)
10. Fee Structure and Financial Assistance 79
11. The Period Requirement for Submission of Thesis
12. Change of Supervisor 80
13. Performance of Monitoring
14. Pre-Submission Seminar, Synopsis and Thesis Submission
15. Panel of Examiners 81
16. Board of Examiners
17. Thesis Evaluation
18. Resubmission 83
19. Viva-Voce Examination
20. Award of the Ph.D. Degree
21. Leave 84
22. Cancellation of Registration
23. General 85
Annexures Formats of various declarations/certificates I to XVI
-
CHAPTER 1
ABOUT THE UNIVERSITY
Introduction
Deenbandhu Chhotu Ram University of Science & Technology, Murthal came into being on 6th November 2006 by upgrading erstwhile Chhotu Ram State College of Engineering, Murthal through an Act 29 of 2006 of the Legislature of the state of Haryana with the vision to facilitate and promote studies and research in emerging areas of higher education with focus on new frontiers of science, engineering, technology, architecture and management studies, humanities, and also to achieve excellence in these and connected fields. The University has been considered eligible for grants under Section 12(B) of UGC Act, 1956 in March, 2009. The University has got affiliating status and the technical and professional College/ Institutes located in the District Sonepat have been affiliated to the University.Six B.Tech programmes of the University have also been
accredited by National Board of Accreditation (NBA).
Vision
To facilitate and promote studies and research in emerging areas of higher education with focus on new frontiers of Science, Engineering, Technology, Architecture & Management, leading to evolution of enlightened technocrats, innovators, scientists, leaders and entrepreneurs who will contribute to national growth in particular and to international community as a whole.
Mission
Universitysmissionis to achieve excellence in education and research in main and related areas of Applied Science, Engineering, Technology, Architecture, Management and Healthcare and to occupy a place of pride amongst the most eminent organizations of the world.
Location
The University is located in NCR on National Highway No. 1 (G. T. Road) about 50 km from ISBT, New Delhi towards Chandigarh and 8 km from Sonepat railway station. The location of the University falls within one of the growing industrial belts of Haryana extending from Kundli to Panipat.
Campus
It is a residential university with a campus sprawling over 273 acres of land. Architecturally the campus has been developed in four distinct zones academic, residences, hostels and recreational. The academic premises comprise offive blocks including one administrative block. One iconic building i.e. Library cum Computer Centre is also completed and is operational and a convention centre is under construction.
1
-
Hostels
It is a residential university and hostel accommodation is provided to almost all students. Permission to become day scholar is granted where students parent or a close relative reside within the radius of 15 kilometres of university campus.
There is a mess cum kitchen unit in each hostel. Mess is run by a student body on cooperative basis under the guidance of the respective warden. The entire affair related to hostels is dealt with by a council of wardens headed by the chief warden.
Every hostel has a spacious furnished common room with TV and telephone connection. A Billiards room is also functional in hostel premises. The Hostels are in the process of being linked with campus wide networking. At present there is Wi-Fi connectivity in all the hostels. In addition to this each hostel has badminton court, table tennis room, and a cyber cafe.
Name of the Hostel Capacity
K. S. Krishnan Hall 276
Chandrashekhar Hall 276
Hargobind Khurana Hall 276
Aryabhatt Hall 276
Gargi Hall 150
Kalpana Chawla Hall 400
Mother Teresa Hall 290
Shopping Complex
The campus has a shopping complex in the vicinity of students hostels and residential area. There is a departmental store, photo shop, xerox shop, book and stationery shop and also a milk booth. There is a State Bank of India branch with ATM facility and a Post office. The Shopping complex also has a cafeteria surrounded with lawns.
Medical Facilities
The University has a medical centre in the campus catering to the medical needs of the students and staff. It has two permanent resident Medical Officers including one Lady Medical Officer. It is equipped with first-aid and ambulance facilities. In addition to this, a few test facilities are augmented by the department of Biomedical engineering.
Academic Programmes
The University intends to impart high-end education through 28Regular PG Courses and 9 Regular
UG Courses in the academic session 2014-15. University is also running Ph. D. Programme
wherein approx. 225 research scholars have been registered. University also offers Beginners and
Certificate Courses in foreign languages such as French and German. Few UGC Career Oriented
Programmes are also conducted to enhance the breadth of knowledge and skills of engineering
students as well as other/outside candidates.
2
-
Co-curricular Activities
Traditionally students organize three events during an academic year. Rhythm A grand cultural event in which participants of technical institutions from all over India are invited. Another very popular technical eventisTechnova in which the participation from all over India is invited. This technical festival comprises more than hundred technical events including online participation designed to test the innovative skills of students in cognitive and psychomotor domains. Third event is Sports Meet. To ensure the participation at the interuniversity level, the University has created two zones of affiliating colleges/institutes and one for University Teaching Departments. After the zonal sports and cultural competitions, the inter-zonal competitions are organized.A tennis Academy has also been established with provisions of courts of international standards.
In addition to this, there are different clubs, societies & student chapters of professional bodies like IEEE, IICHE, IE etc.which conduct quizzes, debates on burning National & International issues related to education, social & environmental problems etc. and other intellectual activities. Hobby Expo Club which caters to music, painting, sketching, coin collection, pot making etc. and include fine art clubs. These clubs organize activities throughout the year and the awards and certificates are given at the time of Rhythm.
SC/ST Cell
An SC/ ST cell has been set up in the University to ensure proper implementation of various schemes of the UGC, the Government of India and State Government concerning scholarships, stipends etc. for welfare of reserved categories. The guidelines for various types of scholarship/stipends as revised from time to time by the Central and State Govt. are notified to all departments and displayed on the notice boards of the concerned departments.
Alumni Association
Our Alumni Association is headed by a senior faculty member of the university and acts as a nodal agency for maintaining liaison with the alumni all over the world. It plays a very important role to promote and encourage the alumni to exchange professional knowledge by undertaking and facilitating conferences, seminars, expert lectures amongst students and faculty. It also honours and facilitates distinguished alumni. The alumni meet takes place at least once in a year.
Earn While Learn Scheme
Under this scheme, students from UG and PG level are selected for part time job, such as lab work, assistance work at library, computer centre and other offices. It is a sort of earned scholarship of the value of Rs. 1000/- per month. They are required to devote 40 hours a month.
University Library
The University Library is housed in Saraswati Library Complex which is a four story building, a
perfect and beautiful blend of aesthetics, latest technology and green architecture. The University
Library has a seating capacity of 500 members. The University Library opens from 7.00 A.M. to
7.00 P.M. on all working days and 9.00 A.M. to 5.00 P.M. on Saturdays, Sundays and Gazetted
Holidays.
3
-
The University Library has a 54, 480 books and other reading materials and 343 e-books. The
University Library subscribes 101 printed Indian Journals. It also subscribes 67 Magazines and 19
Newspapers to cater the needs of users for current awareness and leisure reading. The University
Library has undertaken the subscription to the Online Journals of J-Gate (Social and Management
Science 6936), Emerald 150 (Management 150), EBSCO (Art and Architecture 239) and
IEEE/IEL. Being a member of INFLIBNET an IUC of UGC the University Library is provided
with e-resources of Taylor and Francis (2918), Springer (1389), American Chemical Society (37)
and American Physical Society (10). The University has also access of two databases i.e. ISID and
JCCC through INFLIBNET.
For access to online Journals, databases and electronic books the University Library has 32 work
stations with a setup of 1 G connectivity.
The University Library maintains a separate Reference Section consisting of fact finding resources
such as Dictionaries, Directories, Handbooks, Encyclopedias, Yearbooks and a copy of a title meant
for reference only. The University Library also maintains a separate section on Deenbandhu Chhotu
Ram The great leader of Haryana after whom the University takes its name. In this section books
and related literature and a photo gallery on Chhotu Ram Ji is available.
Using LSEase Software of Libsys Corporation has computerised its actively used collection
searchable through Online Public Access Catalogue (OPAC). The books have been bar-coded and
pasted with computer generated spine labels to facilitate computerised circulation system and
shelving of books in proper classified order. The bar-coded Identity-cum-Library Cards are issued
to members.
The University Library is an institutional member of the British Council Library, New Delhi, Tata
Energy Research Institute, New Delhi and Indian Science Congress Association, Kolkata. The
University Library is the life member of the Institution of Engineers, Kolkata and Current Science
Association, Bangalore.
The University Library offers other services such as:
1. Multipurpose/Seminar Hall for holding Seminars and Conferences with a capacity of
100 persons.
2. A separate reading hall which remain open for reading and access of INTERNET for
24x7 hrs.
3. Photocopy Services through a private vendor on University approved rates with other
facilities of lamination, spiral binding, coloured printing etc.
4. Reference Services on demand
5. Book Bank facility.
6. Library Surveillance through CCTV system using 32 cameras and two LCD monitors.
4
-
University Computer Centre
The new University Computer Centre is housed in state-of-the-art iconic building based on green
technology. The University Computer Centre (UCC) manages the Central Computingand
Networking facilities for the University community. The UCC is having dedicated 1GB NKN
leased line for Internet connectivity from BSNL. University is having 1500 Nodes Wired Network
and WI-Fi connectivity in all Hostels over 10G OFC backbone. University Computer Centre is
Remote Centre of IIT Bombay/IIT Kharagpur to conduct various Workshops & Training for
students & faculties through Audio Visual interaction. University is designated as Aakash Project
Research centre of IIT Bombay and having more than 244 Aakash II tablets.
University Computer Centre is equipped with the state-of-the-art facilities. The centres
inventory is having more than 200Desktops, 22 laptops, 3 Itanium servers, 244 Aakash Tablets one
large size Plotter, Xerox machine, LCD projectors, Scanners and Laser printers. The Centre is
having state-of-Art Audio Visual facilities to conduct various Online Lectures & Training
programmes. NPTEL video lectures are available for users on university intranet. The UCC has
large numbers of latest licensed Software and is a part of AICTE initiative Office365. University
Computer Centre managing various automation and online activities of the university.
University Computer Centre is managing two websiteswww.dcrustm.ac.in&www.dcrustm.org
which offer complete upto date information to all the stake holders.
Central Workshop The central workshop is an academic centre where emphases on practical aspects of manufacturing and production processes are given. This is the area where students are trained and gets hands on experience before going to different industries. The practical training is being imparted to all UG level engineering students of the University. The Central Workshop is spread in 6000 Sq. Mtr. area and mainly comprised of Machine shop, CNC Machine Shop, Welding Shop, Fitting Shop, Forging Shop, Sheet Metal Shop, Carpentry Shop, Pattern Shop, Foundry Shop, Metrology Section. CNC Shop and Welding shops are equipped with modern CNC Lathe, CNC Milling and EDM, TIG, MIG, and Plasma cutting machines.There is trained and experienced staff in each shop for imparting effective training to the students.
Convention Centre
A state-of-the-art Convention Centre is under construction with an estimated cost of Rs. 26 crores whose foundation stone has already been laid by Honble Chief Minister of Haryana on November 19, 2008.
Training & Placement Cell
The Training & Placement Cell is a separate Unit which deals with Placement and Campus interviews of our students. The cell is being headed by regular Training & Placement Officer. The Training and Placement Cell acting as interface between University and Companies, has maintained
5
-
symbiotic, vibrant and purposeful relationship with industries across the country. As a result, it has built up an impressive placement record both in terms of percentage of students placed as well as number on companies visiting the campus in attractive salary packages. The department hosts companies on campus and ensures that every aspirant is assured of a bright career of his/ her choice. A spacious Training Placement Cell, equipped with the state-of-Art facilities Seminar Hall of 200 seating capacity for PPTs, 40 seating capacity Air conditioned Lounge, Board Rooms, Smart class Room, Internet Lab, Air conditioned Committee Room for group discussion and Examination Halls have been made available by the University for conducting the Campus Interviews for final year students and training programmes for the pre-final year students towards preparing them for campus recruitment programmes. University has Computer Lab for online test accumulate 130 students in single shift. The Training & Placement Cell has been fostering a very productive and mutually beneficial relationship with the industries toward generating the placement opportunities for our students. Our students have the capacity to think beyond the boundaries of contemporary text books as they are nurtured in a quality research environment. For these reasons several corporate have placed us among the top echelon of Institutes for the purpose of campus recruitment programmes. The Placement Cell performs the following functions:
Nurtures industry institute interaction, by organizing and coordinating frequent industrial visits, in plant training and projects of industrial relevance for the students, with the sole aim of zeroing down the hiatus between the industry and the academia.
Organizes & coordinates campus placement programme, with a view to assist to every aspirant in fetching good placement.
Helps every students define his/her career interest through individual expert counseling.
Makes available updated database and job profile of the companies and thus helps each student analyse and choose company of his interest. The department has in its active file a database of nearly 6000 companies.
Receives and forwards the feedback pertinent curriculum improvement from the visiting companies to the faculty, to ensure that the curriculum follows the latest industrial trends.
Provides facilities for the visiting companies to conduct pre-placement talks, written tests, on line Test, group discussions and interviews.
Organise expert lecture on various topics.
Training & Placement Cell has an excellent team of Student Coordinators to further sharpen all
process. We facilitate interview panel with AC accommodation in Universitys Guest House. The
major organizations which visit our University for Campus Placement are given below:
6
-
TATA POWER
ISGEC
INFOSYS
TECH MAHINDERA
MOTOROLA
CDIL
PUNWIRE
INFOGAIN
HFCL
SANDAN-VIKAS
TRUINA
TATA TELE SERVICES
TCL
HCL
DALMIA CEMENT
JOHNSONS CONTROL
SRF
WIPRO
HONDA
INDO-ASIANFUSE GEAR
ESCORTS
ISGEC
SPICE TELECOM
FRICKS INDIA
ACCENTURE
COGNIZANT
MINDA
HPGCL
STAR PAPER MILLS
GLASS INDIA
INDIAN ARMY
DCM SHRIRAM
HONEY WELL
MINDFIRES
SOLUTIONS
WAPCOS
PUNJ LLOYD
SONALIKA
TRACTORS
NDPL
HITACHI
DABAR INDIA
ONIDA
CDIL
IDEA CELLUAR
TCS
LURGI
CMC
BEL
SATYAM
HLS ASIA
TIMES OF INDIA
AREVA
L& T INFOTECH
L&T
CONSTRUCTION
HAWELLS INDIA
SAPIENT
JBM
WINDMOLLER &
HOLSCHER
ERICSSON GLOBAL
INDIA SERVICES
SUZUKI POWER
TRAIN
ROOMAN
TECHNOLOGIES
OPEN SOLUTIONS
SOFTWARE
SERVICES PVT. LTD.
ISGEC JOHN
THOMPSON
INNOVA LAB
INSTRUMENTS
DENSO
ESCORTS AUTO
PRODUCTS
IMPETUS
DANSO
BHARTI INFRATEL
LIT
JOHNSON RUBBERS
ROOHINIKA
NECTORLIFE
SCIENCE
BSES RELIANCE
ASPIRING MIND
FIDELITY
RELAXO
7
-
CHAPTER 2
FACULTIES, TEACHING DEPARTMENTS/CENTRE AND
ACADEMIC PROGRAMMES AT A GLANCE
2.1 FACULTY OF ARCHITECTURE, URBAN AND TOWN PLANNING
Department Programme(Course) Intake Duration
Architecture (i) M.Arch.(Sustainable Architecture) 20 2 years
(ii) Masters(Urban & Rural Planning) 20 2 years
(iii) Masters(Construction and Real Estate Management)- a UGC Innovative programme
15 2 years
(iv) B.Arch. 80 5 years
2.2 FACULTY OF ENGINEERING & TECHNOLOGY
Department Programme(Course) Intake Duration
Bio-Medical
Engineering
(i) M. Tech.(Biomedical Engineering) 18 2 years
(ii) B. Tech.(Biomedical Engineering) 40 4 years
Civil
Engineering
(i) M.Tech.(Civil Engineering(Structural Engg.))
18 2 years
(ii) M. Tech.(Civil Engineering(Highway Safety & Engg.)) 18 2 years
(iii) B. Tech.(Civil Engineering) 60 4 years
Electrical
Engineering
(i) M. Tech.(Electrical Engineering(Instrumentation &
Control))
18 2 years
(ii) M. Tech.(Electrical Engineering(Power Systems)) 36 2 years
(iii) B. Tech.(Electrical Engineering) 60 4 years
Electronics &
Communication
Engineering
(i) M. Tech.(Electronics & Communication Engineering) 36 2 years
(ii) M. Tech.(Electronics & Communication
Engineering(VLSI Design))
18 2 years
(iii) B. Tech.(Electronics & Communication Engineering) 60 4 years
Mechanical
Engineering
(i) M. Tech.(Mechanical Engineering) 36 2 years
(ii) B. Tech.(Mechanical Engineering) 60 4 years
2.3 FACULTY OF INFORMATION TECHNOLOGY AND COMPUTER SCIENCE
Department Programme(Course) Intake Duration
Computer Science &
Engineering
(i) M. Tech.(Computer Science &Engineering) 36 2 years
(ii) B. Tech.(Computer Science & Engineering) 60 4 years
8
-
2.4 FACULTY OF MANAGEMENT STUDIES
Department Programme(Course)-Regular Intake Duration
Humanities (i) M.A. (English) 30 2 years
Programmes-Part time
(ii) Beginners Course in French/German 30 each 6 months
(iii) Certificate Course in French/German 30each 1 year
Department Programme(Course) Intake Duration
Management Studies (i) Masters(Business Administration) 90 2 years
(ii) Masters(Business Administration)-
Integrated Programme
60 5 years
(iii) Master in Hospital Administration 36 2 years
2.5 FACULTY OF NONCONVENTIONAL SOURCES OF ENERGY AND
ENVIRONMENTSCIENCE
Department/Centre Programme(Course) Intake Duration
Biotechnology (i) M. Tech.(Biotechnology) 18 2 years
(ii) M. Tech.(Food-Technology) 18 2 years
(iii) M.Sc.(Biotechnology) 30 2 years
(iv) PG Diploma(Forensic Biotechnology) 15 1 year
(iii) B. Tech.(Biotechnology) 40 4 years
Chemical Engineering (i) M. Tech.(Chemical Engineering) 18 2 years
(ii) B. Tech.(Chemical Engineering) 60 4 years
Centre of Excellence for
Energy and Environmental
Studies
(i) M. Tech.(Energy Studies and
Environmental Management)
18 2 years
(ii) M.Tech.(Renewable Energy) 18 2 years
2.6 FACULTY OF SCIENCE AND TECHNOLOGY INTERFACE
Department Programme(Course) Intake Duration
Chemistry (i) M.Sc.(Chemistry) 45 2 years
Materials Science & Nano-technology
(i) M. Tech.(Materials Science & Nano-technology)
18 2 years
Mathematics (i) M.Sc.(Mathematics) 45 2 years
(ii) M.Sc.( Mathematics)-Integrated Programme 50 5-years
Physics (i) M.Sc.(Physics) 45 2 years
Note: 1. Admission to all UG programmes and Masters programme in Business Administration for
two years is made by Haryana State Technical Education Society (HSTES) and
beginners/certificate course by the Department separately.
2. All the departments/centre also run Ph.D programmes which is governed by Ph.D
ordinance of the university
9
-
CHAPTER 3
FACULTIES AND DEPARTMENTS
3.1 FACULTY OF ARCHITECTURE, URBAN AND TOWN PLANNING
DEPARTMENT OF ARCHITECTURE
The Department of Architecture was established in 1991 and has been offering five year Bachelor Degree
course in Architecture recognized and approved by the Council of Architecture, accredited by National
Board of Accreditation, AICTE and the Government of Haryana. Master of Architecture (Sustainable
Architecture) is introduced from the session 2012-13. Master of Urban and Rural Planning commenced from
the session 2010-11. Master of Construction and Real Estate Management (UGC innovative) programme
commenced from the session 2012-13. Doctoral programme in architecture commenced from the session
2011-12. The teaching faculty is drawn from premier institutions like IITs, NITs and Schools of Architecture
across the country. The Departments vision is to create competent professionals to cater to the aspirations of
local, regional and global needs and to explore newer possibilities in Architecture using latest techniques,
besides promoting research and development in the field of Architecture and allied fields..The Department
has a well equipped CAD Lab/Building Material Museum, Model Making Workshop, five spacious
undergraduate studios cum lecture halls, three postgraduate studios cum lecture halls with audio-visual
facilities.
The Department has also international collaboration with foreign universities from Germany and USA. The
Department has a 100% placement record with the alumni placed in Government and private sector, while a
number of graduates are pursuing post graduate courses in institutions like IITs, SPA-New Delhi and CEPT
Ahmadabad besides institutions abroad.
Faculty Profile
Name of Faculty Member Designation Highest
Qualification
Specialization
Dr. Chitrarekha Kabre Professor &
Chairperson
Ph.D. Computer Aided Design Energy
Efficient Design of Building, Project
Management
Ar. Vijay Kumar Professor M. Arch. Architecture & Town Planning
Dr. Jyoti P. Sharma Professor Ph.D. Built Heritage, Cultural landscapes
Dr. Ajay Monga Professor Ph.D. Housing, Town Planning
Smt. Shailja Sikarwar Associate Professor M. Arch. Architectural Education
Ar. Ravi Vaish Associate Professor M. Arch. Architectural Education
Ar. Praveen Kumar Associate Professor Associateship of I
T PI
Town Planning
Ar. Lalit Kumar Assistant Professor MURP Town Planning
Ar. Satpal Assistant Professor Associateship of I
T PI
Town Planning
Ar. Manoj Kumar Assistant Professor M. Tech. Facility Planning
Ar. Neha Yadav Assistant Professor M. Arch. Architecture
Ar. Nirmala Assistant Professor MURP Town Planning
Ar. Sneh Assistant Professor M. Planning` Town Planning
10
-
3.2 FACULTY OF ENGINEERING & TECHNOLOGY
DEPARTMENT OF BIOMEDICAL ENGINEERING
The Department of Biomedical Engineering was established in the year 2004. Biomedical engineers are involved in the design, development & utilization of materials, devices and techniques for clinical research & use, and serve as members of the healthcare delivery team seeking new solutions for difficult healthcare problems confronting our society. The department has well equipped labs with latest research-oriented systems to expose the students to the outside world of medical technology.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. Manoj Duhan Chairperson Ph.D. Reliability, DSP, VLSI, Analog Electronics
Dr. Dinesh Bhatia* Assistant Professor Ph.D. Biomedical Engineering
Ms. Seema Chawla Assistant Professor M. Tech. Biomedical Engineering
Ms. Poonam Assistant Professor M. Tech. Biomedical Engineering
Sh. Dinesh Kumar
Atal
Assistant Professor M. Tech. Biomedical Engineering
Dr. Geeta Singh Assistant Professor Ph.D. Biomedical Engineering
Mr. Sarvjeet Assistant Professor M. Tech. Biomedical Engineering
Ms. Sarita Assistant Professor M. Tech. Biomedical Engineering
*on lien
DEPARTMENT OF CIVIL ENGINEERING
The Department of Civil Engineering was established in the year 2009. It has established state of art
labs and classrooms. For providing design solutions and for material testing in this regard the
department has developed a Test House equipped with sophisticated equipments and
hassuccessfully delivered many consultancy services to the society. The Department is also in the
process of establishing a Centre of Excellence in Highway Safety which will act as a store house
ofknowledge related to road accidents and road safety, a Trauma Centre and accident analysis and
Research facilities.
11
-
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. Dhirendra Singhal
Professor & Chairperson
Ph.D. Structural Engineering
Er. Pankaj Kumar Agarwal
Assistant Professor M.E. Soil Mechanics
Er. Gynendra Singh Assistant Professor M.E. Transportation Engineering
Er. Arti Chowksey Assistant Professor M.Tech. Computer Aided Design
Er. Sunita Kumari Assistant Professor M.Tech. Environmental Engineering
Er. Aman Ahlawat Assistant Professor M.Tech. Construction Tech. and Mgt.
Er. Sachin Dass Assistant Professor M.Tech. Highway Engineering
Er. Parveen Assistant Professor M.Tech. Structural Engineering
Er. Sauabh Jaglan Assistant Professor M. Tech. Transportation Engineering
Er. Atul Garg Assistant Professor M.Tech. Structural Engineering
DEPARTMENT OF ELECTRICAL ENGINEERING
The Department offers a four years Bachelor degree programme in Electrical Engineering and two
years Master degree programmes in Electrical Engineering with specializations Instrumentation
and Control Engineering and Power Systems. The faculty has rendered useful services in the
shape of Consultancy to Industry / Public sector undertakings such as Transmission Line Losses
Studies, Testing of Motors, Energy Audit etc. Facilities also exist for providing expert
consultancies in the fields of design of electrical transmission systems, fuzzy control systems &
self-tuning control systems design, genetic algorithms based optimization, power flow studies. The
Department has well-equipped and spacious laboratories with all modern facilities for
experimentation at U.G., P.G. and Ph.D. levels.
12
-
Faculty profile
Name of
Faculty
Member
Designation Highest
Qualification
Specialization
Dr. J.S. Saini Professor Ph.D. Control & Instrumentation, Intelligent Control, Fuzzy Logic Systems, Genetic Algorithms, Chaotic Systems
Dr. D.K. Jain Professor& Chairperson
Ph.D. Power Systems, Electric Power Quality, Electric Machines
Dr. S.K. Gupta Professor Ph.D. Power System Dynamics & Control, FACTS, Deregulation
Dr. Surender Dahiya
Associate
Professor
Ph.D. Electrical Machines, Power Systems,
Electric Power Quality
Sh. Sandeep Nandrajog
Associate
Professor
B.E. Electrical Engg., Entrepreneurship
Development, Career Counseling,
Organizational Development, Educational
Technology Sh. Mukesh Kumar
Associate
Professor
B.Tech. M.Sc. (IT), MBA
Electrical Engg., Non-conventional Energy
Sh. Ajay Kumar Singh
Assistant
Professor
M.Tech. Instrumentation, Optimal Control, Control
Systems, Microcontroller & Microprocessor
Dr. Mukhtiar Singh*
Assistant
Professor
Ph.D. Power Systems, SCADA
Mrs. Sanju Saini Assistant
Professor
M.Tech. Control Systems, Instrumentation, Neural
Networks, Chaos Theory
Dr.. Naresh Yadav
Assistant
Professor
Ph.D. Power Systems, Deregulation, Protection,
Custom Power Devices
Sh. Rajneesh Pawar
Assistant
Professor
M.Tech. Fuzzy Logic, GAs, Control System, Power
System, Energy Audit
Dr. Manish Kumar
Assistant
Professor
Ph.D. DSP, Image Processing, Power Quality
Sh. Rohtash Assistant
Professor
M.Tech. Advanced Control Systems
Ms. Deepika Assistant Professor
M. Tech. Power Systems
Mr. Ravi Assistant Professor
M. Tech. Power Systems, Electric Power Quality, Electric Machines
13
-
Dr. Naresh Kumar
Assistant Professor
Ph.D. Power Systems
Mr. Anil Kumar Assistant Professor
M. Tech. Power Systems
Sh. Deepash Sharma
Assistant Professor
M. Tech. Power Systems
* On Extra-ordinary leave
DEPARTMENT OF ELECTRONICS AND COMMUNICATION
ENGINEERING
The Department of Electronics and Communications Engineering was established in the year 1987. It offers Bachelor degree and Master Degree programme in Electronics & Communication Engineering that caters to specific areas such as Optical Communication, Satellite Communication, Data Communication, VLSI and Digital Signal Processing etc. The Department has well-equipped and spacious laboratories with all modern facilities for experimentation at U.G. and P.G. levels.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. Manoj Duhan Professor Ph.D. VLSI, D.S.P., Reliability, Wireless Communication
Dr. Amit Kumar Garg
Professor & Chairperson
Ph.D. Optical Fiber Communication Systems and Networks, DPS, Wireless Communication
Sh. S. K. Grewal Associate Professor M. Tech. Instrumentation & Control, Intelligent Intrumentation
Ms. Poonam Singhal Associate Professor M.Tech. Communication, Optical
Communication Sh. Manish Jain Associate Professor B.E. Micro Electronics, Digital Image
Processing Dr. Priyanka Associate Professor Ph.D. D.S.P., Wireless Communication,
SAW Filter
Ms. Gitanjali Pandove
Assistant Professor M.Tech. Communication & Information
Systems
Dr. Pawan Dahiya Assistant Professor Ph.D. Digital & Embedded Design,
CAD for VLSI, Evolutionary
Computing
Sh. Mridul Chawla Assistant Professor M. Tech. Digital, Electronic Product Design
& Technology
14
-
Ms. Prachi Chaudhary
Assistant Professor M. Tech. Image Processing, D.S.P.,
Microprocessor and
Microcontroller
Sh. Rajeshwar Dass Assistant Professor M.E. Wireless Communication, D.S.P.,
Image Processing,
Ms. Sunita Malik Assistant Professor M. E. Micro Electronics, Wireless
Communication
Ms. Rekha Yadav Assistant Professor M. Tech. VLSI Design Ms. Himanshi Saini Assistant Professor M. Tech. Optical Communication, VLSI Ms. Kusum Dalal Assistant Professor M. Tech. Wireless Communication Ms. Rajni Assistant Professor M. Tech. Image Processing Ms. Charanjeet Assistant Professor M. Tech. Communication Systems Sh. Vikas Nehra Assistant Professor M. Tech. Analog & Digital, VLSI, ESD
DEPARTMENT OF MECHANICAL ENGINEERING
It is the oldest department in the University. It offers B. Tech course in Mechanical Engg. & Master of
Technology Degree course in Mechanical Engineering and with specialization in Thermal
Engineering/Design/Manufacturing & Automation/Industrial Engineering that aims at the coverage of almost
all the aspects / principles that control the design, modeling, simulation and optimization of thermal,
hydraulic, pneumatic, mechanical and advanced manufacturing & production systems. The department has
well-equipped and spacious laboratories with all modern facilities for experimentation at U.G., P.G. and Ph.
D. levels.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. K.D. Gupta Professor Ph.D. Mechanical Design, Vibration, Rotor Dynamics, Tribology
Dr. Raj Kumar Professor Ph.D. Thermal, CFD
Dr. Rajender Singh Professor& Chairperson
Ph.D. Manufacturing Engg., CAD/CAM/CIM
Dr. Ramesh Kumar Grag
Professor Ph.D. System Design, Production and
Industrial Engineering
Dr. R.K. Soni Professor Ph.D. Mechatronics, CAD, Automobile
Engg., Reliability Engg.
Dr. M.N. Mishra Professor Ph.D. Analysis of Manufacturing
Processes, Operation& Supply
Chain management, Simulation
15
-
Dr. Avdhesh Kumar Professor Ph.D. Thermal Design &Optimization,
Gasifier Engine Technology,
Nanofluids, MCHEx Science,
Alternate Energy Systems
Dr. Suresh Verma Professor Ph.D. Tribology, Mechanical Design,
FEM
Dr. A.K. Gupta Associate Professor Ph.D. Industrial Engg., Production
Management
Dr. S.K. Jarial Associate Professor Ph.D. Thermal Engineering, Turbo-
Machines& Industrial Engg.
Dr. Mahender Singh Associate Professor Ph.D. Industrial Engineering&
Operation Management Dr. Vikash Modgil Assistant Professor M. Tech. Mechanical Engineering,
Industrial Engg. Manufacturing
System Engg.Manufacturing
System Engineering Sh. Rajneesh Kumar Assistant Professor M. Tech. Mechanical Engineering
Sh. Ajay Kumar Assistant Professor M. Tech. Rotodynamic Machines
Sh. Anil Kumar Nerwal
Assistant Professor M. Tech. Design, Modeling Simulation
System Dynamic Control
Dr.. Amit Sharma Assistant Professor M. Tech. Thermal Engineering, Green
Technology, heat pipe,
carbonutilization energy
conservation.
Sh. Pardeep Sharma Assistant Professor M. Tech.
Manufacturing & Automation
3.3. FACULTY OF INFORMATION TECHNOLOGY &COMPUTER SCIENCE
DEPARTMENT OF COMPUTER SCIENCE AND ENGINEERING
The department offers Bachelors and Masters Degree programme in Computer Science and
Engineering to cater to the everlasting demand of the market. The extensive and sufficient
laboratory facilities are one of the added advantages of the Department. These facilities are
regularly updated to cope with the ever progressing and rapidly advancing technologies being
introduced in software development sector.
16
-
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. Anita Singhrova Professor&
Chairperson
Ph.D. Wireless Communication, Parallel
Computing
Dr. Parvinder Singh Associate Professor Ph.D. Information Security, Data Compression
Dr. Amita Malik Associate Professor Ph.D. Mobile Adhoc and Wireless
Sensor Networks, Wireless
Networks Dr. Sukhdip Singh Assistant Professor Ph.D Software Engineering, Computer
Architecture
Ms. Suman Assistant Professor M. Tech. Wireless networks, Object
Oriented Programming
Ms. Suman Deswal Assistant Professor M.Tech. Networks, Software Engineering
Dr. Dinesh Singh Assistant Professor Ph.D Wireless Networks, Software
Engineering
Sh. Ajmer Singh Assistant Professor M.Tech. Database Management, Computer
Networks, Software Engineering
Ms. Darshana
Kumari*
Assistant Professor M. Tech. Security/Cryptology/Networking/
Data Structures/Programming
Sh. Sanjeev Indora Assistant Professor M.Tech. Internet concepts, Intelligent
Systems
Sh. Rajvir Singh Assistant Professor M.Tech. Computer Networks
Ms. Kavita Rathi Assistant Professor M. Tech. Neural Language Program
Ms. Neetu Verma Assistant Professor M. Tech. Neural Networks
Sh. Jitender Kumar Assistant Professor M. Tech. Computer Networks, Cloud
Comuting *On Extra Ordinary Leave to join as System Analyst in Computer Centre of DCRUST,Murthal.
3.4 FACULTY OF MANAGEMENT STUDIES
DEPARTMENT OF HUMANITIES
Committed to thorough education and research coupled with interactive teaching pedagogy, the
Department of Humanities (English) provides an environment where creativity and critical acumen
can thrive. With the vision To nurture a holistic being with professional acumen and social
responsibility the Department is committed to inculcate an awareness of and appreciation for the
interdisciplinary understanding, interpretation, creation and use of the emerging knowledge and
17
-
technological environment of the 21st century among its students. Addressing the dire need of
society, the department tries to achieve excellence in education of Humanities, Communication and
Social Sciences through continuous proficiency building. It believes in and relentlessly works to
uphold high professional standards in higher education and ensures a golden future for its students.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. Rekha Professor Ph.D. Indian Literature in English, Women Studies, Communication Skills
Dr. Sujata Rana Professor Ph.D. British Literature
Ms Tript Lata Associate Professor& Chairperson
M.Phil Communication Skills
Dr. Mayur Chhikara Assistant Professor Ph.D. American Literature
Dr. Pradeep Singh Assistant Professor Ph.D. Indian Literature in English
Dhramendra Singh Assistant Professor M. Phil Diasporic Literature
DEPARTMENT OF MANAGEMENT STUDIES
The Department offers MBA, MBA(5 Years Integrated) and Master in Hospital Administration(MHA)
where attractive range of subjects are offered, which can be used to extend students main areas of interest.
The department has started MBA(5 Years Integrated) in 2012 which is a dual degree programme. A
Candidate once admitted to this programme shall not be required to take re-admission at any subsequent
stage of the programme depending upon the fulfillment of other conditions, however he/she may opt to
discontinue the programme after 3rd
year of the programme.
The department is actively involved in Consultancy Projects as it has got Consultancy Projects of worth Rs.
3 crore (approx.) the area of Public Health Management and Rural Management. Recently the department
has been selected as a Support Organization by the Ministry of Drinking Water and Sanitation,
Government of India. During the short span of time after its inception in 2008, the department has received
multiple grants from various funding agencies and establishments for promotion of academics, research and
consultancy, the department has received research and development projects of worth Rs. One crore and
twenty one lakh from University Grants Commission.
18
-
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr.Rajbir Singh Professor & Chairperson
Ph. D. Finance, Marketing, Strategic Management, Business Economics
Dr.Anil Khurana Associate Professor Ph. D. IT & E-Commerce, Marketing
Dr. S. N. Mahapatra Associate Professor Ph. D. Marketing & Strategic Management
Dr. Aarti Assistant Professor Ph. D. IB, Marketing& Economics
Dr. Anju Assistant Professor Ph.D. HRM & OB
Dr. Rupa Rathee Assistant Professor MBA Marketing and Strategic Management
Sh. Pankaj Chaudhary
Assistant Professor M.Phil. Accounting & Finance
Sh. Anand Chauhan Assistant Professor MBA Knowledge Management &
Technology Management
Dr. Jitender Kumar Assistant Professor Ph.D Finance & Accounting
Dr. Satpal Assistant Professor Ph. D. HRM & Finance
Dr. Manisha Assistant Professor Ph.D. HRM& Finance
Mrs. Vandana Assistant Professor M.Phil. IB & HRM
Sh. Parveen Kumar Assistant Professor MBA Marketing and Finance
3.5 FACULTY OF NON CONVENTIONAL SOURCES OF
ENERGY AND ENVIRONMENT SCIENCE
CENTRE OF EXCELLENCE FOR ENERGY AND ENVIRONMENTAL
STUDIES
The Center of Excellence for Energy and Environmental Studies (CEEES) at this University was established in the year 2009. The faculty members are engaged in extensive research in the frontier areas of Energy and Environmental Sciences, with an aim to promote lab to field research. The laboratories are well equipped with all the modern instruments and facilities to provide high end research in different specializations of Energy and Environment.
The CEEES center also provides elective courses for B.Tech. programmes in areas of Non-conventional Energy Sources, Energy Ecology and Environment, Direction Energy Conversion Methods and Environment Impact Assessment. In addition to the curriculum projects, the Center is also involved in a project to set up an Energy Park in the University campus, and in a project proposal to invite installation of a 500KWp solar photovoltaic power generation system for use by the University primarily.
19
-
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. J.S. Rana Head Ph.D. Animal Biotechnology
Dr. A.K. Berwal Associate Professor Ph.D. IC Engines, Thermal Engineering
Ms. Anita Singh Assistant Professor M. Tech. Wastewater Treatment
Dr. S.P. Nehra Assistant Professor Ph.D. Condensed Matter Physics, Hydrogen Technology
Dr. Sudesh Chaudhary Assistant Professor Ph.D. Heavy Metal Chemistry
Dr. Nisha Kumari Assistant Professor Ph.D. Renewable Energy
Ms. Jyoti Rani Assistant Professor M. Tech. Bioremediation, EIA
DEPARTMENT OF BIOTECHNOLOGY
The Department of Biotechnology was established in the year 2004 to offer a B.Tech programme. To give an impetus to research in the emerging areas of biotechnology M.Tech. (Biotechnology) and Ph.D.(Biotechnology) programmes were introduced in 2009 and 2010. The department has also started Master of Science in Biotechnology in 2011. From the current session, the Department is going to start M.Tech(Food Technology) and PG Diploma in Forensic Biotechnology. The faculty members of the Department are actively engaged in research and have three major projects from UGC and two major infrastructure projects from ministry of food processing industries, Govt. of India (Rs. 75 lac) and UGC, New Delhi (Rs. 60 lac). The laboratories are well-equipped to provide hands on experience to the students beside the normal curriculum. The undergraduate and post graduate students are provided an opportunity to do a research project which helps them to handle independent projects in academia and industry.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. J.S.Rana Professor & Chairperson
Ph.D. Animal Biotechnology
Dr. Kiran Nehra Associate Professor Ph.D. Molecular & Microbial Genetics
Dr. Anil Sindhu Associate Professor Ph.D. Genetic Engineering
Dr. Reeti Chaudhary Assistant Professor Ph.D. Biochemistry & Biosensor Technology
Dr. Dharmender Kumar Assistant Professor Ph.D. Molecular & Microbial Biotechnology
20
-
Dr. Pamela Singh Assistant Professor Ph.D. Immunology & Molecular Biology
Dr. Aditi Arya Assistant Professor Ph.D. Genetic Engineering & Molecular Biology
Dr. Krishan Kumar Selwal Assistant Professor Ph.D. Microbiology & Industrial Biotechnology
DEPARTMENT OF CHEMICAL ENGINEERING
The Department of Chemical Engineering was established in the year 1990. The department is maintaining a continued tradition of good quality education, research and academia-industry interaction since its inception. The department has well equipped laboratories for experimentation at UG, PG and Ph.D. levels.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. D. P. Tiwari Professor & Chairperson
Ph.D. Chemical Engineering & Allied Fields
Sh. S. K. Sharma Assistant Professor M. E. Process Control
Ms. Sunanda Assistant Professor M. E. Heat Transfer & Thermo Dr. Manju Assistant Professor M.E. Chemical Reaction
Engineering &
Ms. Nidhika Bhoria* Assistant Professor M.E. Nanocatalysis
Sh. Surinder Singh
Bhinder*
Assistant Professor M.E. Chemical Engineering & Allied Fields
Sh. Anil Yadav Assistant Professor M. Tech. Chemical Engineering & Allied Fields
Mrs. Mamta Bhagat Assistant Professor M.E. Environmental Engineering Sh. Yashwant Verma* Assistant Professor M. Tech. Nuclear Science & Power
Plant Operation
* on leave
3.6 FACULTY OF SCIENCE & TECHNOLOGY INTERFACE
DEPARTMENT OF CHEMISTRY
The Department of Chemistry has been a constituent part of Applied Science department of this University (erstwhile C.R.S.C.E., Murthal) from 1987 to 2008. In January 2009 the department has got separate existence in this university. Presently department has chemistry labs to cater the needs of undergraduate, postgraduate and research students. Some other departments of the university also take advantages of the facilities available in chemistry lab.
21
-
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. B.P. Singh Professor Ph.D. Polymer, Organic, Complexes and Pollution
Dr. Pratibha Chaudhary Professor & Chairperson
Ph.D. Physico-organic studies, Polymer Chemistry, Green Chemistry
Dr. Sanjeev Makin Professor Ph.D. Solution thermodynamics, Thin oxide films, Energy from waste, Bio-technology, Global Warming & Reduction
Dr. Suman Lata Associate Professor Ph.D. Corrosion, Thermodynamics
Dr. Hari Om Assistant Professor Ph.D. Analytical, Inorganic synthesis & Organometallic
Dr. Sumit Kumar Assistant Professor Ph.D. Organic & Bio-organic Chemistry
Dr. Sonia Nain Assistant Professor Ph.D. Optical Spectroscopy, Co-ordination and Organo-transition metal, Physico-chemical studies of surfactant system
Sh. Rajender Singh
Malik
Assistant Professor M.Sc. Polymer Composite, Nano Composite & Fuel Cell (PEM)
Dr. Dinesh Kumar Assistant Professor Ph.D. Phosphors materials
Dr. Krishan Kumar Assistant Professor Ph.D Thermodynamics Studies
DEPARTMENT OF MATERIALS SCIENCE & NANO TECHNOLOGY
The Department of Materials Science and Nanotechnology has started functioning from the session 2010-11. It offers M.Tech and Ph.D. programmes. This department combines the cutting edge areas of Materials Science and Nano-technology and is committed to train students in all aspects of modern materials including metals, ceramics, polymers, electronic and optical materials and materials characterization. Modern state of the art laboratories are coming up with modern equipment and facilities. The faculty members of the department are actively engaged in the forefront domains of research and have individual Major Research Projects from Govt. funding agencies like DST, UGC etc.
22
-
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. A.K. Sharma Professor & Chairperson
Ph. D. Conducing Polymer based Nanocomposites, Supercapacitors
Dr. B.S. Dehiya Associate Professor Ph. D. Nanocomposites, Electron Microscopy, Cermic
Dr. Surender Duhan Assistant Professor Ph. D. Nanomaterials, Nanocomposites, Glass, Sensors
DEPARTMENT OF MATHEMATICS
The Department of Mathematics attained its present status of independent department in January 2009. From its very inception, the department has aimed to be a centre of excellence in Mathematics and Computing. The faculty of the department teaches the various topics in mathematics to undergraduate students of different engineering streams. The department has started M.Sc. in Mathematics from the session 2009-10 with specialization in Pure Mathematics, Applied mathematics and Computing. Some faculty members are also credited with research projects from UGC. From the session 2012-13 the department has started Five years integrated M.Sc. in Mathematics.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. P.K. Bhatia Professor Ph.D. Information Theory, Applied Mathematics
Dr. S.K. Garg Professor & Chairperson
Ph.D. Functional Analysis, Approximation Theory, Analysis
Dr. R.C. Nautiyal* Professor Ph.D. Differential Geometry, Complex Space
Dr. Rajive Kumar Professor Ph.D. Numerical Methods, Software Engineering
Dr. Sudhir Batra Professor Ph.D. Algebra, Number Theory,
Algebra Coding Theory
Dr. Navneet Hooda Associate Professor Ph.D. Functional Analysis
Dr. S.K. Mudgil Assistant Professor Ph.D. Topology, Functional
Analysis
Dr. Vijay P. Tomar Assistant Professor Ph.D. Information Theory
23
-
Dr. Ravinder K. Saharwat
Assistant Professor Ph.D. Fluid Mechanics and
Seismology
Dr. Avinash C. Upadhyay
Assistant Professor Ph.D. Quening Theory
Mr. Manjit Singh Assistant Professor M.Phil. Number Theory, Algebraic
Coding Theory, Algebra
Ms. Suman Panwar Assistant Professor M.Sc. Applied Mathematics
*on leave
DEPARTMENT OF PHYSICS
The Department of Physics attained its present status of independent department in January 2009. The department has started M.Sc. in Physics from the session 2009-2010. Department has well equipped Laboratory for doing experimentation at B.Tech. and M.Sc. level. The up-gradation of the department laboratory is being done from time to time as per the recent advances and development in the concerned area. Further the department has started master degree with two specialization courses, in Condensed Matter Physics and Electronics from the session 2012-13. Two new specialization courses in Nuclear Physics and Spectroscopy will be started at a later stage. The department also has hydrogen energy research laboratory which is being developed as per the latest development in this field. The research projects sanctioned by various research agencies like UGC, DAE, DRDO, AICTE, DST and CSIR are being carried out in the department, some equipment such as X-Ray, Diffractometer, Electron Beam coating Unit, R.F Induction Furnance, DTA etc. are available in the department for PG and research studies.
Faculty profile
Name of Faculty
Member
Designation Highest
Qualification
Specialization
Dr. B.P.Malik Professor Ph.D. Condensed Matter Physics Dr. S.K. Singh Professor &
Chairperson Ph.D. Condensed Matter Physics
Dr. (Mrs.) Rajni Shukla Professor Ph.D. Condensed Matter Physics
Dr. Satish Khasa Professor Ph.D. Condensed Matter Physics
Dr. Pawan S. Rana Associate Professor Ph.D. Condensed Matter Physics
Dr. Pardeep Singh Assistant Professor Ph.D. Nuclear Physics
Dr. Vinod Kumar Assistant Professor Ph.D. Condensed Matter Physics
Mr. Ashok Kumar Assistant Professor M.Sc. Condensed Matter Physics
Dr. Ravinder Kumar Assistant Professor Ph.D. Nuclear Physics
Mrs. Ashima Hooda Assistant Professor M.Sc. Condensed Matter Physics
24
-
CHAPTER 4
PROGRAMMES AND ELIGIBILITY
4.1 POST GRADUATE PROGRAMMES OF THE UNIVERSITY
Department of Materials Science & Nano Technology
Sr.
No
Name of the
Programme
Name of
Course
Duration
of the
Course
Sanctioned
Intake
Eligibility Conditions
1. M. Tech. Materials Science & Nano Technology
2 Years 18 B.E./B.Tech.or equivalent in Material Science &Engineering/Material
Science/Nanotechnology/Chemical
Engineering/Biotechnology/Bio-medical
Engineering/Electronics & Communication
Engineering/Mechanical Engineering/Electrical
Engineering/Ceramic Engineering/M.Sc.
Chemistry/Physics /
Nanoscience/Nanotechnology scoring at least
55% (50% for SC) marks in aggregate.
Department of Electrical Engineering 1. M. Tech. Electrical
Engineering
(Power
Systems)
2 Years 36 B.E./B.Tech or equivalent in Electrical
Engineering / Electrical & Electronics
Engineering /Electrical & Instrumentation /
Control & Instrumentation / Instrumentation /
Instrumentation & Controls/ Power Engineering
scoring at least 55% (50% for SC) marks in
aggregate. 2. M. Tech. Electrical
Engineering
(I & C)
2 Years 18 B.E./B.Tech.or equivalent in Electrical
Engineering / Electrical & Electronics
Engineering / Control & Instrumentation/
Control Engineering/ Instrumentation/
Electronics and Instrumentation/ Instrumentation
& Control/ Electronics Engineering/ Electronics
& Communication Engineering/ Electronics &
Telecommunication Engineering/ Electronics &
Control/ Biomedical Engineering scoring at least
55% (50% for SC) marks in aggregate.
Department of Electronics & Communication Engineering
1. M. Tech. Electronics & Comm. Engg.
2 Years 36 B.E./B.Tech or equivalent in Electronics Engineering / Electronics & Instrumentation
Control/ Instrumentation & Control/ Electronics
& Communication Engg./Electronics &
Telecommunication Engg./Electronics Instt. &
Control/Electrical & Electronics
Engg./Electrical Engg./ Instrumentation
Engg./Bio Medical Engg. scoring at least 55%
(50% for SC) marks in aggregate.
2. M. Tech. Electronics & Comm. Engg.(VLSIDesign)
2 Years 18
25
-
Department of Mechanical Engineering
1. M. Tech. Mechanical Engg.
2 Years 36 B.E./B.Tech.or equivalent in Mechanical Engg./ Production Engg./Automobile
Engg./Industrial Engg./ Aeronautical Engg.
scoring at least 55% (50% for SC) marks in
aggregate.
Department of Computer Science & Engineering 1. M. Tech. Computer
Science & Engineering
2 Years 36 (30 seats are approved by AICTE)
B.E./B.Tech.or equivalent in Computer Science
& Engg./ Information
Tech./Electronics/Electronics &
Communication Engg./Electronics &
Telecommunication/ Electronics &
Instrumentation Control scoring at least 55%
(50% for SC) marks in aggregate.
Department of Biomedical Engineering 1. M. Tech. Biomedical
Engineering 2 Years 18 B.E./B.Tech.or equivalent in Bio-
Medical/Biotech./Electrical/Electronics&
Communication/Mechanical/Instrumentation
Engg./M. Sc. In Bio-Medical
Instrumentation/Biotech./ Medical
Electronics/Electronics / Physics/
Instrumentation/MBBS/BPT (four yearscourse)/
B. Pharma scoring at least 55% (50% for SC)
marks in aggregate.
Department of Chemical Engineering
1. M. Tech. Chemical Engg.
2 Years 18 B.E./B.Tech or equivalent in Chemical Engg./Bio-Chemical Engg./Chemical
Technology/ Food Technology/ Environmental
Engg./ Polymer Tech. / Paper Tech./ Petroleum
Engg. / Chemical Science/ Sugar Tech./Oil
Tech./Plastic Tech./Paint Tech./ Leather
Tech./Ceramic Engg./ Metallurgical Engg.
Scoring at least 55% (50% for SC) marks in
aggregate.
Department of Civil Engineering
1. M. Tech. Civil Engineering(Structural Engg.)
2 Years 18 B.E./B. Tech.or equivalent in Civil Engg.scoring at least 55% (50% for SC) marks in aggregate.
2. M. Tech. Civil Engineering(Highway Safety & Engg.)
2 Years 18
26
-
Department of Biotechnology 1. M. Tech. Biotechnolog
y
2 Years 18 B.E/ B.Tech or equivalent in Biotechnology/
B.Pharma / M.Sc in Biotechnology,
Microbiology, Biochemistry, Genetics,
Molecular Biology, Biophysics, Bioinformatics,
Biosciences, Life Sciences, Pharmacy, Medical
Sciences, Veterinary Sciences at least 55% (50%
for SC) marks in aggregate.
2. M. Tech. Food
Technology
2 Years 18 BE/ B.Tech./ M.Sc or equivalent in Food
Engineering/ Food Process Engineering/ Food
Technology /Dairy Technology/ Dairy
Engineering/Agri Process Engineering/
Biotechnology/ Biochemistry/ Microbiology/
Food & Nutrition at least 55% (50% for SC)
marks in aggregate.
3.
M. Sc.
Biotechnology
2 Years
30
Bachelors degreeor equivalent in any discipline
of Biological Sciences/ Life
Sciences/Agricultural Sciences/ Veterinary
Sciences/ Fishery Sciences/ Pharmacy/
Engineering/ Technology or Medical Sciences
scoring not less than 50% (45% for SC) marks in
aggregate.
4. P.G. Diploma
Forensic Biotechnology
1 Year 15 B.E./B.Tech.or equivalent in Biotechnology/Biomedical Engg./
B.Pharma/LLB/MBBS/Integrated BS-MS/M.Sc
or equivalent degree in life Sciences including
Anthropology/
Biotechnology/Bioscience/Chemistry/Criminolo
gy/Biochemistry/Microbiology/Genetics scoring
not less than 50% (45% for SC) marks in
aggregate.
Centre of Excellence for Energy and Environmental Studies
1. M. Tech. Energy Studies & Environmental Management
2 Years 18 B.E./B.Tech./ M.Sc. or equivalent degree in any discipline scoring at least 55% (50% for SC)
marks in aggregate.
2. M. Tech. Renewable Energy
2 year 18 B. E./ B. Tech. or equivalent in Mechanical/ Electrical/Chemical /Automobile/
Production/Aerospace/Instrumation and Control
and M.Sc. Physics.
27
-
Department of Architecture
1.
M. Arch.
Sustainable Architecture
2 Years 20 B.Arch. or any other equivalent degree recognized by the Council of Architecture with not less than 50%
marks in the aggregate or equivalent grade of a
recognized university or an examination recognized
as equivalent thereto by this University. Relaxation
up to 5% in the qualifying examination marks shall
be provided to SC candidates as per Haryana
Government rules.
2. Masters Urban and Rural Planning
2 Years 20 Bachelors degree in Civil Engg, Architecture or Planning, Master degree in Economics, Sociology,
Geography from any University / Institution in India
or Abroad or its equivalent degree recognised by the
Government of India with not less than 50% marks in
the aggregate or equivalent grade of a recognized
university or an examination recognized as
equivalent thereto by this University. Relaxation up
to 5% in the qualifying examination marks shall be
provided to SC candidates as per Haryana
Government rules. The qualification of Bachelor in
Planning or B.Tech. (Planning) should be recognized
by the Institute of Town Planners, India.
3. Masters Construction and Real
Estate
Management
2 Years 15 Bachelor degree in Architecture or Civil Engg from any University/Institution in India or Abroad or its equivalent degree recognised by the Government of India with not less than 50% marks in the aggregate or equivalent grade of a recognized university or an examination recognized as equivalent thereto by this University. Relaxation up to 5% in the qualifying examination marks shall be provided to SC candidates as per Haryana Government rules.
Department of Chemistry 1. M. Sc. Chemistry 2 Years 45 B.Sc./B.Sc.(Hons) or equivalent degree with
Chemistry as regular subject at graduation level scoring not less than 50% (45% for SC) marks in aggregate.
Department of Mathematics 1. M. Sc. Mathematics 2 Years 45 B.Sc./B.Sc.(Hons.)/B.A./B.A.(Hons) or
equivalent degree with Mathemaics as regular subject at graduation level scoring not less than 50% (45% for SC) marks in aggregate.
2. M. Sc. (Integrated)
Mathematics
5 Years 50 10+2 or equivalent with Mathematics as one
of the main subject from Central or Haryana State Education Board (or equivalent) scoring not less than 50% (45% for SC) marks in aggregate.
28
-
Department of Physics
1. M. Sc. Physics 2 Years 45 B.Sc./B.Sc.(Hons) degree or equivalent with Physics as regular subject at graduation level scoring not less than 50% (45% for SC) marks in aggregate.
Department of Humanities
1. M. A. English 2 Years 30 Bachelor or Master's Degreeor equivalent in any discipline scoring not less than 50% (45% for
SC) marks in aggregate.
Note: Candidates with Honours in English in qualifying examination would be given weightage of additional 5% in the merit list prepared for the admission to the course.
Department of Management Studies
1. Masters (Integrated)
Business Adminis- tration
5Years 60 10+2 or equivalent from central or Haryana Education Board (or equivalent) scoring not less than 50% (45% for SC) marks in aggregate.
2. Masters Hospital Adminis- tration
2 Years 36 (including 6 sponsored seats for doctors of Health Department and PGI, Rohtak, three seats each)
MD/MS/MDS/MBBS/BDS/M.Tech. (Bio-Medical)/B.Tech. (Bio-Medical)/B.Tech(Medical-Electronic)/B.Tech. (Instrumentation)/BAMS/BPT/B.Pharma/BHMS/B.Sc.Nursing/M.Sc.(Medical)/B.Sc.(Medical)or equivalent scoring not less than 50% (45% for SC) marks in aggregate. Note: Preference in admission will be given in the following order: (a)MD/MS/MDS (b)MBBS/BDS (c)M.Tech.(Bio-Medical)/B.Tech.(Bio-Medical)/B.Tech.(Medical-Electronic)/B.Tech.(Instrumentation) (d)BAMS/BPT/B.Pharma/BHMS (e)B.Sc.(Nursing) (f)M.Sc.(Medical)/B.Sc.(Medical)
29
-
4.2 POST GRADUATE PROGRAMMES OF AFFILIATED COLLEGES Sr.
No.
Name of the College Name of Programme
Name of
Course
Duration
of Course Sanctioned
Intake
1. B.M. Institute of Engg. & Tech., Sonepat-
Bahalgarh Road, Behind Fazilpur Power Sub
Station, V.P.O Raipur, Sonepat-131 001
M. Tech. ECE
CSE
2 Years
18
18
2. Bhagwan Parshu Ram College of Engg.
Gohana, Distt. Sonepat-131301
M. Tech. ME
ECE 2 Years 18
18
3. Bharat Institute of Technology, Sonepat-
Gohana Road, Near Mohana Police Station,
Naina Tatarpur, Distt. Sonepat-131025
M.Tech. ME
CE 2 Years 18
18
4. Delhi Institute of Tech. & Management,
Baraut, Gannaur, Distt Sonepat
M. Tech. CSE 2 Years 36
5. Gateway Institute of Engg. & Tech., Sector-11,
Fazilpur, Sonepat-131001
M. Tech. ME
CE
CSE
ECE
2 Years
24
24
24
24
6. Hindu College of Engg., Industrial Area,
Sonepat-131001
M. Tech. ECE
CSE
EE
(Power
Systems)
2 Years
18
18
18
7. International Institute of Tech.& Management,
49 K.M. Stone, NH-1, Murthal Road Sonepat-
131039
M. Tech. ME
CSE
2 Years 18
18
8. International Institute of Tech. and Business,
Vidyagram, Jhundpur, Sonepat-131023.
M. Tech. ECE
CSE
2 Years 18
18
9. Mahaveer Swami Institute of Tech.,
Jagdishpur, Near O.P. Jindal Univ., Sonepat-
131030
M. Tech. ECE
ME
2 Years 18
18
10. P.M. College of Engg., Kami Road, Sonepat-
131001.
M. Tech. CSE
ECE
ME 2 Years
24
24
30
30
-
11. Royal Institute of Management & Tech., VPO.
Chidana, NH-71-A, Gohana, Panipat-Rohtak
Road, Sonepat-131301.
M. Tech. ECE
CE
ME
CSE
2 Years
24
24
24
24
12. Shri Balwant Institute of Technology, Meerut
Road (Pallri), Near DPS, Sonepat.
M. Tech. ME
CSE
2 Years 18
18
13. South Point Institute of Technology &
Management, Purkhas Road, Near Sugar Mills,
Sonepat.
M. Tech. CSE
ECE
2 Years
24
24
M.Tech.(P
art Time)
ECE 2 Years 24
Note: Eligibility conditions shall be the same as prescribed for the courses offered by the
University. Eligibility conditions for M.Tech. inCivil Engineering(CE) is B.E/B.Tech.or equivalent
in Civil Engineeringscoring at least 55% (50% for SC) marks in aggregate.
4.3 Ph.D PROGRAMME OF THE UNIVERSITY Sl.
No.
Name of Department/
Centre/Chair
Eligibility
1. Electrical Engineering A Candidate for admission to the course for Doctor of Philosophy on a full time basis inany of the Faculties should normally have a Masters Degree in appropriate discipline orequivalent with a minimum of 55% marks (50% in case of SC/ST/ PhysicallyHandicapped) in aggregate (of all the years/semesters of the Masters Degree Course),or equivalent Cumulative Grade Point Average (CGPA) as determined bythe Institute wherever letter grades are awarded.
2. Electronics & Communication Engg. 3. Biomedical Engineering 4. Civil Engineering 5. Architecture 6. Mechanical Engg. 7. Computer Science & Engineering 8. Chemical Engg. 9. Biotechnology 10. Materials Science & Nano Technology 11. Centre of Excellence in Energy and Environment
Studies
12. Chemistry 13. Mathematics 14. Physics 15. Humanities* 16. Management Studies 17. Deenbandhu Chhotu Ram Chair for sustainable
development
*In the subject of English 31
-
Note: 1. However, the eligibility criteria for admission to the Ph.D programme in the Computer Science& Engineering, Computer Science and Applications Sustainable Development, Energy and Environment Studies and Materials Science and Nanotechnology will be as under:
Computer Science and Engineering
B.E./B .Tech. with M.E./M.Tech. in CSE/IT/Software Engineering Computer Science and Applications
MCA or M.Sc.with M.E./M.Tech. in CSE/IT/Software Engineering Sustainable Development:
Master in Social Sciences, M. Tech. in GIS/Remote Sensing, MBA/M.A. inDisaster Management and M.A. / M.Sc. in Geography Energy and Environmental Studies
M. Tech./M.Sc. in Energy Studies/Environmental Sciences/ Biotechnology/ Physics/Chemistry/Energy related Engineering & Technology and other relevant fields. Materials Science & Nanotechnology:
M.E/M.Tech. in Materials Science Engineering / Material Science/ Nanotechnology /Chemical Engineering/ Biotechnology/ Bio-medical Engineering/ Electronics & Communication Engineering/ Mechanical Engineering/ Electrical Engineering, Ceramic Engineering and M.Sc. in Chemistry/ Physics/ Nanoscience/ Nanotechnology
2. The final eligibility of candidates shall be determined at the time of presentation/interview before Departmental Research Committee to be scheduled by the respective departments and accordingly the admissions shall be made as per Ph.D ordinance.
Eligibility Criteria for Resident of Murthal (ROM)
The candidate who fulfills any one or more conditions of the following criteria be considered for
Bonafide resident of the Village Murthal for giving such benefit:-
(a) The candidates, who have passed the examination qualifying there for selection in any Institution from a school/college in the purview of the village Panchayat of that Village.
(b) Children/wards (if parents not living) dependents of persons who after retirement have permanently settled in that village and are residing for more than three years from the date of issue of such
certificate.
(c) Children/wards (if parents not living) dependents of pensioner of Haryana Government irrespective of the fact that the original home of the retiree is in that village and after retirement he has settled in
that village or outside.
(d) Children/ward (if parents are not living) dependents of persons, who have permanent home in that village and include persons who have been residing in that village for a period of not less than 15
years or who have permanent home in that village but on account of their occupation they are living
outside that village.
(e) The wives of such persons who are bonafide residents of that village irrespective of the fact that they had belonged to any place before marriage.
(f) Persons who were born in that village and produce a certificate to that effect; provided that the parents/guardians (if parents are not living) of persons belonging to any one of the above mentioned
categories are Citizen of India.
(g) Children/wards (if parents are not living) dependents of persons, who have immovable property in
that village but may be living in that village or other place than that village.
32
-
CHAPTER-5
ONLINE FILLING OF APPLICATION FORM
Please keep your scanned photograph, saved in a file in jpeg format, ready to upload
on the application form. The file size should be between 20 to 40 kB.
Please keep your scanned signature, saved in a file in jpeg format, ready to upload on
the application form. The file size should be between 10 to 20 kB.
Please read the instructions given below to complete and submit the Online Application
form:-
1. Check eligibility for admission to a programme of your choice by clicking on the Programme and Eligibility Details link.
2. Keep details of your qualification from matriculation onwards ready. 3. All the details required in the Online Application form should be filled in. 4. Last date for submitting the duly completed application along with the required application
fee is 19.06.2014 up to 11.59 P.M. (night time). 5. Application fee must be paid online through Pay Fee link which is activated after the
application form is completed and submit button is clicked. Application fee to be paid is:-
Category Application Fee
General Rupees 1000.00 (One Thousand Rupees only)
SC candidates of Haryana only Rupees 250.00 (Two Hundred Fifty Rupees only)
6. After submitting the Online Application, your registration number and password will be
generated. 7. Note down your registration number and password for future reference. These will be
required for admission test (if applicable) and for counseling.
Note:- If the number of candidates admitted in a PG discipline (course) is less than 5 on the
date of commencement of PG classes, the University will not run that particular discipline
(course). However, the students can be offered admission against the vacant seats in other
courses run by the University/affiliated colleges, if they will be eligible for such a course.
I have read the instructions and accept the terms and conditions.
33
APPLY ONLINE
-
CHAPTER 6
ENTRANCE TEST
POST GRADUATE PROGRAMMES
4.1 Entrance Tests (for Non GATE candidates) for making admissions to various PG programmes of the university and its affiliated colleges will be held at the University Campus as per schedule of events. Syllabus of the entrance test is given in chapter- 10.
4.2 Admission to Master in Hospital Administration (MHA) will be based on the academic merit of the qualifying examination.
4.3 The other important instructions are available in chapter- 13. 4.4 The Eligible candidates including appeared/appearing candidates in academic session 2013-
14, shall appear in the entrance test (as applicable). Mere taking of the entrance test shall not entitle a candidate for admission. However, the eligibility of candidates shall be determined at the time of counseling and admission.
4.5 The weightage for Part A and Part B of the Entrance test (other than Integrated PG programmes) are as follows:
Part- A of 30 marks covering following topics: (i) General knowledge (ii) General Aptitude (iii) English (Equal weightage of 10 marks for each of the three components) Part- B of 70 marks covering the given relevant syllabus
4.6For admission inM.Sc.in Mathematics(5-Year Integrated) and Master in BusinessAdministration(5-Year Integra