DCP PoCket for LeiCa tDra 6000 · 2013. 11. 21. · DCP ProjeCt for WinDoWs Project planning and...
Transcript of DCP PoCket for LeiCa tDra 6000 · 2013. 11. 21. · DCP ProjeCt for WinDoWs Project planning and...
-
Product brochure
DCP PoCket for LeiCa tDra6000Mobile and ruggedized large-volume metrology package
-
LeiCa tDra6000 Laser station for Large-voLume metroLogy
most accurate total station for industrial use maintenance-free Piezo drives with low power
consumption automatic target recognition and tracking reflectorless pin point distance meter for non-contact
measurements within a volume of 600 m
fuLLy ruggeD PoCket PC
sunlight readable touch screen shockproof miL-stD 810g Water- and dustproof iP67 integrated camera for reporting Wifi and Bluetooth radio integrated barometer/compass 8–10 hours of continuous operation
-
X
yZ
DCP PoCket sPeCiaL measurement moDes
special measurementsin many cases, coordinates are not directly visible or cannot be measured in a conventional way. special measurement options are available in all measurement and alignment modes.
X or y or Zindividual recording of coordinate directions.
Hidden Point using a Hidden Point device is a time saving solution for the measurement of points which are not in direct line of sight.
vision Point a vision Point result is created when the line of sight intersects a selected or measured plane.
separate recordingindividual recording of distance and angles for edge or corner features.
Circle CenterCircle centers can be measured with or without projection plane.
-
Data viewer with aim functionreviewing of all created features and stations with the integrated Data viewer. Point lo cations of measured or constructed features can be verified on the object with the aim laser pointer.
feature based measurementsmeasure all relevant object geometries and analyze them on-site. motorized positioning with nominal values will enhance productivity. simple Bi-sections, intersections, Distances and angles can be computed within DCP Pocket.
reflectorles sscanningscanning of lines, planes and defined areas are possible with DCP Pocket and Leica tDra6000. simply define the boundary and leave the scanning work to the system.
moving stations with automatic point recognitionuser friendly move station process with automatic point recognition.
automatic inspection of point setsrepeat inspection of parts and geometries can be automated with the integrated automatic inspection mode.
Coordinate system managementCreate multiple Coordinate systems and manage them on-site. standard alignment functions such as 3-2-1 or Best-fit are supported.
DCP PoCket at a gLanCe
main menuClearly structured starting point for alignments, measurements, file exchange and data reviewing.
-
DCP PoCket for LeiCa tDra6000
feature based measurements scanning angle and distance analysis feature construction Coordinate system manager move station with automatic point recognition Data viewer with aim function and laser pointer Data exchange via Bluetooth or usB cable
DCP05 for LeiCa tDra6000 (on BoarD)
on board solution for basic measurements included with every Leica tDra6000 Laser station
Point measurement mode with motorized aim function
roller and shaft alignment Distance and angle analysis Data exchange via Cf memory Card
DCP ProjeCt for WinDoWs
Project planning and reporting of measurements with DCP05 and DCP Pocket
excel based reporting feature based data tree Csv import/export
-
7985
32
sensors PreCision measuring instruments
softWare soLutions
uLtra HigH aCCuraCy CmmsWHite LigHt sCannersmuLtisensor & oPtiCaL systemsgantry Cmms
Laser traCkers & stations
PortaBLe measuring arms BriDge Cmms HoriZontaL arm Cmms
© 2013 Hexagon Metrology. Part of Hexagon
All rights reserved. Due to continuing product development, Hexagon Metrology reserves the right to change product specifications without prior notice.
Printed in Germany. November 2013
Hexagon metrology is part of Hexagon (nordic exchange: HeXa B). Hexagon is a leading global provider of design, measurement and visualisation technologies that enable customers to design, measure and position objects, and process and present data.
Learn more at www.hexagon.com
Hexagon metrology offers a comprehensive range of products and services for all industrial metrology applications in sectors such as automotive, aerospace, energy and medical. We support our customers with actionable measurement information along the complete life cycle of a product – from development and design to production, assembly and final inspection.
With more than 20 production facilities and 70 Precision Centers for service and demonstrations, and a network of over 100 distribution partners on five continents, we empower our customers to fully control their manufacturing processes, enhancing the quality of products and increasing efficiency in manufacturing plants around the world.
for more information, visit www.hexagonmetrology.com