DAWOOD UNIVERSITY OF ENGINEERING & …...DAWOOD UNIVERSITY OF ENGINEERING & TECHNOLOGY 7 The...

Iqbal Campus:Dowood University of Engineering and TechnologyST-6, Block 17, Gulshan-e-Iqbal, Karachi-75300, PakistanTel: 99243874, 99243866, Email: [email protected]

Main Campus:Dowood University of Engineering and TechnologyM.A. Jinnah Road, Karachi-74800, PakistanTel: 99231195-98, 99230307, Fax: 92-21-99230710Email: [email protected]

DAWOOD UNIVERSITY OF ENGINEERING & TECHNOLOGY

Prospectus

BS MathematicsEvening Program

2018-19


2


3

Vice Chancellor’s Message .......................................................................................................................... 04

Chapter 1. Introduction to DUET .................................................................................................................. 06

List of Academic Heads ..................................................................................................................... 09

List of Administration Offices .......................................................................................................... 08

Chapter 2. Department of Basic Sciences, Mathamatics English and Humanities ........................................ 12

Chapter 3. Students facilities ......................................................................................................................... 18

Chapter 4. Regulations ................................................................................................................................... 22

Chapter 5.Courses .......................................................................................................................................... 34

Chapter 6.Fee Structure ................................................................................................................................. 38

CONTENTS


4

It gives me a great pleasure to contribute a message on the occasion of starting the Bachelor

of Science Program in Mathematics.

Dawood University of Engineering & Technology has truly turned a corner in starting an

Evening Program of Applied Mathematics. It is generally believed that Pakistan is devoid

of good Mathematicians and Physicists. Dawood University has embarked on the course of

providing quality education in all its academic program and the present program of Bachelor

of Science shall in future lead to offering Postgraduate degrees in the field of Mathematics.

Mathematics is a back bone of all Engineering disciplines and we believe that this program

shall augment Engineering Education at Dawood University.

Dr. Faizullah Abbasi

Vice Chancellor’s Message


5

Chapter: 01

Introduction to DUET


7

The foundation stone of the Dawood College of Engineering & Technology was laid by the former President

of Pakistan (Late) Field Marshal Muhammad Ayub Khan in 1962. The College was established by Dawood

Foundation under the supervision of Seth Ahmed Dawood in 1964.

On March 2013 the Sindh Assembly passed the Sindh ACT No. XII of 2013, upgrading it to a University. Its

academic and administrative control has been vested in the Syndicate, Senate and Academic Council as per

ACT. The Vice- Chancellor is the Principal Executive and Academic Officer of the University.

The University offers four year degree programs in the field of engineering and Five year degree programe

in the Field of architecture.

The Engineering departments include Electronics, Chemical, Industrial & Management and Metallurgy &

Materials. From the session 2010-2011, the University has introduced four new departments namely Energy

& Environment, Petroleum & Gas, Telecommunication, and Computer System Engineering. The University

has two campuses, one located near Quaid-e-Azam Mausoleum and the other situated at Block-17 Gulshan-

e-Iqbal, Karachi. These campuses comprise various facilities including class rooms, state of the art libraries,

laboratories, workshops, drawing halls, Students cafeteria, auditorium, with a capacity of 650, seminar

rooms girls common room etc.

The University has a fleet of thirteen buses for pick and drop facility to the students. DUET has well-

Introduction


8

equipped computer laboratories. We are situated in the heart of Karachi with an outreach to all the Industrial

zones of the city. Our students have a regular opportunity to visit industries for practical training.

It shall be pertinent to note that with the assistance and support of the Higher education commission (HEC)

a Video Conference room with state of the art facilities has been established under the PERN, which also

provides access to Digital library.

Realizing the importance of Quality Assurance, DUET has established its Quality Enhancement Cell in

November 2009 to implement quality improvement programs in all the departments and faculties of DUET

under the supervision and guideline of the Higher Education Commission and QAA.

Since DUET is located in the largest industrial city of Pakistan, various Engineering department are directly

involved in providing solutions/consultation to local industries. Students are assigned final year projects

with the in plant training and internship in and outside Karachi under active supervision of experts in the

industry.

In order to develop entrepreneurial qualities in our students and develop a base for impact based research

DUET has recently established Office for Research, Innovation and Commercialization (ORIC). The ORIC

is expected to be the hub of research and also act as an incubator for our students to enter into the world of

industry and business.

By writing up the History, first ever MS and PhD program is being offered in Electronic Engineering and

Chemical Engineering. Electronic Engineering is offering MS program in three streams i.e. Electronic

System Engineering, Power Electronics and Communications Signal Processing. While, Department of

Chemical Engineering is offering MS program in four streams such as Materials Engineering, Energy

Engineering, Process Engineering and Design Engineering.


9

S. No Name Contact Number

1

Department of Electronic Engineering

Dr. Arsalan AnsariPhD (Electrical Engg Major in Power Electronics) Hanyang University, South Korea

021-99232636021-99231195-98 Ext: 300

2Department of Chemical Engineering

Dr. Rashid Hussain AbroPhD (Chemical Engg) BUCT, China

021-99232637021-99231195-8 Ext: 314

3Department of Industrial Engineering & Management

Dr. Zeeshan AliPhD (Mechatronic Engg) University of Nottingham, UK

021-99232639021-99231195-8 Ext.237

4Department of Metallurgy & Materials Engineering

Engr. Prof. Dr. Muhammad Hayat JokhioPhD (Metallurgy & Materials Engg) MUET

021-99232638 021-99231195-8 Ext.307

5Department of Petroleum & Gas Engineering

Dr. Saleem Qadir TunioPhD (Petroleum Engg) UTP, Malaysia

021-99232641021-99231195-8 Ext.223

6 Department of Telecommunication EngineeringDr. Izhar Hussain ZaidiPhD (Signal Processing) University of Bristol, UK

021-99232642021-99231195-8 Ext.308

7 Department of Computer Systems EngineeringDr. Saleem Ahmed PhulPhD (Electronic Engg) Chonbuk National University, South Korea

021-99232643021-99231195-8 Ext.232

8 Department of Energy & Environment EngineeringEngr. Sikandar Ali AbbasiMS (Environment Engg) SSUET

021-99232640021-99231195-8 Ext.306

9

Department of Architecture & PlanningAr. Rabia SiddiquiMSc. Environmental Management,PGD in Poverty ReductionB. Arch, M.PCATP,M.IAP, CIWEM

021-99243874021-99243866

10Department of Basic Sciences, Maths & HumanitiesDr. Ghulam Abbas KandhroPhD (Chemistry) University of Sindh

021-99232644021-99231195-8 Ext.239

ACADEMIC HEADS


10


1

Vice Chancellor

Dr. Faizullah Abbasi

PhD (Metallurgy Engg) Sheffield City,UK

021-99230701

021-99231195-8 Ext: 267

2

Pro Vice Chancellor

Dr. Pir Roshan Din Shah Rashdi

PhD (Mechanical Engg) University of Nottingham, UK

021-99232648

021-99231195-8 Ext: 263

3

Dean, Faculty of Engineering

Prof. Dr. Abdul Waheed Bhutto

PhD (Chemical Engg) MUET

021-34921353

021-99231195-8 Ext: 259

4

Academic Coordiantor

Department of Architecture & Planning,

Dr. Dost Ali Khowaja,

PhD (Urban & Regional Planning) UK

021-99243367

5

Director Post Graduate Studies

Dr. Asif Ali Shah

PhD (Materials Science) DUT, China

021-34921353

021-99231195-8 Ext: 260

6

Acting Registrar / Campus Administrator

Engr. Capt. (R) Waqar Hussain

MA (Economics)

021-99232645

021-99231195-8 Ext: 251

7

Controller of Examinations

Mr. Gul Muhammad Bhayo

MA, LLB

021-99230476

021-99231195-8 Ext: 309

8Director Finance

Mr. Shabeer Shaikh021-99231195-8 Ext: 329

9

Consultant Human Resources Development (HRD)

Mr. Iftikhar Ahmed Soomro

BE (Metallurgy Engg) DUET

021-99231195-8 Ext: 221

ADMINISTRATION


11


10

Director HR

Engr Sikandar Ali Abbasi

MS (Enviromental Engg) SSUET

021-99231195-8 Ext: 225

11

Project Director

Mr. Muhammad Afzal Shaikh

BE (Civil Engg)

021-99231195-8 Ext: 294

12Advisor, Student Affairs

Mr. Atta ur Rehman021-99231195-8 Ext: 253

13

Director Sports

Engr. Rashid Ali

BE (Chemical Engg) DUET

021-99231195-8 Ext: 303

14

Director Quality Enhancement Cell

Dr. Shaukat Ali Mazari

PhD (Chemical Engg) University of Malaya, Malaysia

021-34911080

021-99231195-8 Ext: 310

15

Director ORIC

Dr. Ghulam Mujtaba

PhD (Envoirment) South Korea

021-99231159-8

16

Director DILAA

Dr. Pervez Ahmed

PhD (Metallurgy) UK

021-34911080

17

Acting Librarian

Mrs. Salma Javed

MLS

021-99231195-8 Ext: 313

Chapter: 02

Department of Basic Sciences, Mathamatics,

English and Humanities


13

About the Department:Basic Sciences and Humanities department aims at providing a comprehensive knowledge of basic scientific

principles, mathematical tools and grooming the personalities of their students in every sphere of life. The

department contributes to all the core branches in enhancing the prime concepts through the Basic Sciences

and Humanities i.e.; Chemistry, Physics, Mathematics, English and Humanities and hence preparing the

students ready to gain the fundamental knowledge of their core engineering

branch.The department has been serving since the foundation of Dawood in

1962 and has commendably contributed in the era of academia and research. All

the Engineering disciplines have wide-ranging applications of these subjects.

The department comprises highly qualified and well experienced faculty and

dedicated non-teaching staff. Basic Sciences and Humanities lays down the

basement for every budding engineer with the essential brass tacks and vital

ingredients of engineering education to make the students help in shaping

themselves as conquering engineers in building the nation’s prosperity.

Chemistry is a foundation subject for Chemical, Metallurgical, Petroleum and Industrial Engineering. The

foundation of laboratories in all the engineering disciplines is significant development of short term and long

term projects. The department provides adequate laboratory facilities for undergraduate programs. It offers

both theoretical and experimental support in chemistry to the undergraduate students.

Mathematics, the queen of sciences is the basis for all branches of Science, Engineering and Technology.

Any complex ideas can be logically expressed by equations and formulae. Mathematics itself is a language

through which difficult problems can be addressed. The section of Mathematics covers a range of expertise

from the basic theoretical mathematical models to numerous advanced applied engineering related

mathematical studies. Mathematics is taught with practical approach which will provide a sound foundation

for the Engineering disciplines. Learners are made to do theoretical work of Mathematics with the help of

programming languages such as C++ and MATLAB in well-equipped laboratory.

Physics also plays vital role in building foundations of all Engineering disciplines in general and Electronics

in particular. The study of Physics uncovers the mysteries of nature through the knowledge of properties of

matter. The state-of-the-art education in the allied Engineering disciplines in the presence of highly qualified

and distinguished faculty members of respective fields along with fully equipped and spacious laboratories.

DEPARTMENT OF BASIC SCIENCES, MATHAMATICS,

ENGLISH AND HuMANITIES


14

There is also English section for enhancing language and communication skills of the learners which in the

end helps enhancing overall aptitude of the learners. English language is pervasive and spoken throughout

the world. It is the language for all walks of life. A good command and communication in English are

essential in the modern world to wield not only respect but in all business transactions.

Meanwhile the section of humanities covers the Pakistan Studies, Islamic Studies, Civics/Ethics and other

related studies. The purpose of teaching these subjects in an engineering university is to inculcate into the

rising generation a sense of duty and loyalty to their country Pakistan and religion Islam. Pakistan studies

and Islamic studies are taught to make the students true and patriotic Pakistanis and practical Muslims.

Islamic studies will make them a good human being that will not only be successful in this finite world, but

also hereafter. Pakistan study will produce patriotic and true Pakistanis to justify the maxim as the land of

pure people.

Knowledge of all these Basic Science subjects surely laid a firm foundation for the Engineering disciplines.

If the students’ knowledge in these disciplines is sound, they will surely outperform.

Dr. Ghulam Abbas Kandhro

Chairman


15

List of Faculty:Sr. #

Name Designation Qualification Specialization University

Department of Basic Sciences

1 Dr. Ghulam Abbas Kandhro

Chairman/ Associate Professor

PostdocMicroextraction,

Spectroscopic Methods, Method development

Erciyes University, Kayseri, Turkey

PhD Analytical Chemistry University of Sindh, Jamshoro

MSc Chemistry University of Sindh, Jamshoro

2 Mr. Syed Nizamuddin Shah Bukhari

Assistant Professor

PhD(In Progress) Plasma Physics KU

M Phil Atomic Physics QA University, Islamabad

3 Ms. Darakhshan Ara Lecturer

PhD(In Progress) Adsorption FUUAST, Karachi

MSc Physical Chemistry KU

4 Mr. Fida Hussain KhosoLecturer

(On Study Leave)

PhD(In Progress)

Computer Science, Software Engineering

Indus University, Karachi

MS Privacy and security of data on cloud computing MAJU, Karachi

5 Mr. Jibran KhanLecturer

(On Study Leave)

PhD(In Progress) Renewable Energy Aarhus University,

Denmark

M Phil Renewable Energy KU

6 Mr. Muhammad Ashraf Lecturer

M Phil Laser Plasma Spectroscopy

University of Sindh, Jamshoro

BS Physics University of Sindh, Jamshoro

Department of Mathematics

7 Mrs. Zehra A. Naveed Assistant Professor

PhD(In Progress) Mathematics KU

M Phil Fluid dynamics KU

MSc Mathematics KU

8 Mr. Faisal Nawaz Assistant Professor

PhD(In Progress) Mathematical Modeling KU

M Phil Mathematical Modeling FUUAST, Karachi

9 Mr. Mashkoor Ahmed LecturerMSc Applied Mathematics KU

BSc Mathematics KU


16

10 Mr. Faraz Mahmood Lecturer

PhD (In Progress)

Inequalities in Real Analyses KU

MSc Mathematics KU

11 Mr. Arsalan Ahmed (On Study Leave) Lecturer

PhD(In progress) Mathematics Shandong University,

China

BS Mathematics KU

12 Mr. Azhar Iqbal Lecturer

PhD(In Progress) Mathematics FUUAST, Karachi

M Phil Mathematics FUUAST, Karachi

13 Mr. Shafquat Ali Lashari LecturerM Phil Fluid Dynamics Using

Analysis SoftwareIsra University, Hyderabad

BS Mathematics SALU, Khairpur

14 Mrs. Maria Khan LecturerM Phil Fluid Dynamics Through

Naval Stocks Equation FUUAST, Karachi

MSc Mathematics KU

Department of English

15 Mr. Rafiq Rahman LecturerMA English Literature SALU, Khairpur

BA English SALU, Khairpur

16 Mrs. Suneeta Kumari LecturerMA English Literature SALU, Khairpur

MA English Linguistics SALU, Khairpur

17 Mrs. Ayesha Amer (On Study Leave) Lecturer

M Phil (In progress)

English Language & Literature

Air University, Islamabad

MA English Language & Literature BZU, Multan

18 Mr. Mushtaque Ahmed Solangi Lecturer

M Phil (In progress)

Sociolinguistics, Language Policies, Linguistics

Imperialism, Language Pedagogy


MA English Linguistics University of Sindh, Jamshoro

19 Ms. Erum Pervaiz Lecturer

M Phil English Language & Literature MUET, Jamshoro

MA English Language & Literature


Department of Humanities

20 Mr. Naveed uz Zaffar Lecturer

PhD (In Progress) Islamic Studies KU

MA Islamic Studies KU

21 Mrs. Mehwish Parveen LecturerMA Pakistan Studies KU

BA Pakistan Studies KU

22 Mrs. Mahvish Asif Shaikh Lecturer

MA Islamic Studies SALU, Khairpur

BA Islamic Studies Punjab University, Lahore


17

1. Analytical Chemistry Laboratory

A basic background in the chemical principles, particularly important to analytical chemistry and students are trained as analytical and testing scientists by adopting a multi-disciplinary approach.

Performing basis analytical tools such as weighing, measuring precise volumes, heating, analysis of experimental errors, quality assurance, gravimetric methods and volumetric analysis in the laboratory.

The ability to judge the accuracy and precision of experimental data and to show how these judgments can be sharpened by the application of statistical methods

A variety of modern analytical instruments housed in the Chemistry laboratory to provide students amble hands-on experience to solve wide scope of analytical problems by using conventional and modern methods for the quantitative analysis of environmental and industrial samples.

2. Physics Laboratory

Physics laboratory is intended to introduce undergraduate students to the different areas of physics i.e. Applied Physic & Engineering Physics and various experiments are conducted for Mechanics, Thermodynamics, light, Electromagnetism and semi-conductor fields.

Physics provides the foundation for many other fields such as engineering and life sciences and offers an

explanation in quantitative terms of how advanced technologies work.

Provide the practical problem solving skills that an engineering degree teaches backed up by the theory that physics offers.

Future Activities of the Department

• For improving English communication skills of the students, DUET intends to establish Self Access Laboratory and English language laboratory where long and short courses focusing four language skills will be taught. If English communication skills of the students are good, they will have better future prospective in terms of jobs or doing higher studies. Such labs will also be helpful in initiating research work on language and language testing. Foreseeing the value of language research in the fields of ELT, SLL, Syntax, Teaching Methods, ESP and Issues in Applied Linguistics

• The department also intends to initiate under graduation programs (B.S in Mathematics) and post graduation programs M.S. in areas of Chemistry, Physics, Mathematics and English as well.

• The department also makes sure to facilitate video-conferencing with high speed internet so that the students could attend the real time lectures of reputed scholars of the world and could watch live experiments in chemistry and physics and also practical applications of Mathematics in various engineering disciplines.

List of Laboratories

Chapter: 03

STUDENTS FACILITIES


19

10.1 Student Cafateria A well furnished and Air Conditioned chilled cafateria is available for male students where hygienic

food and refereshment is available, Cafateria has sitting capacity of 100 students. Cafateria offers a wide range of food and drink together with the opportunity to socialize with friends and colleagues. Realizing the growing enrollment of the female students, University has recently established separate dedicated new

canteen for the girls.

10.2 Auditorium

A state of art Auditorium is available for academic activities, where different sort of academic activities are held such as debate competitions, seminars, conferences etc.

10.3 Girls Common Room Recently, university has made well furnished gilrs common room that has sitting capacity of 50 grils

students.

10.4 Library

The university has an air-conditioned central library on first floor and a book bank and lending library on fourth floor of the main building. It stocks books and monographs on all subjects forming part of

STuDENTS FACILITIES

Cafeteria Cafeteria

Auditorium Auditorium


20

the university curriculum including multiple copies of text books and current journals. Separate library facility exists at the department of Architecture at Iqbal Campus.

The central library has at present about 40,000 books on its shelves, which may be borrowed by the

students.

University also have air-conditioned video conferencing facilities for holding seminars and lectures at National and International level. Additionally, teaching departments have their own seminar libraries and audio visual facilities. All student admitted in university are eligible for library membership.

10.5 Identity Card

The students after being admitted to the University will be issued Identity Cards by the Registrar Office/ Administrative Officer. It is necessary for the students to keep their valid Identity Cards with them while attending the classes, traveling in the point buses or staying on the campus. .

10.6 Sports

Sports enthusiasts won't be disappointed by the activities on offer. Our Athletes/ Teams compete in a variety of competitions including those hosted by the Higher Education Commission.

10.7 Photocopying Facility

The university provides photocopy facilities against a payment of nominal charges.

Library Library

Girls Common Room Girls Common Room


21

10.8 University Transport

Seven new Hino Buses are available for Pick & Drop facility at main routes of Karachi for DUET Students. Since university is situated in center of the city, public transport is easily available for all routes of the city.

10.9 Industrial Internship Program

The University-Industry Bridge provide impetus tothe University to achieve Academia of Relevance, which is mandatory by Academic regulatory authorities, such as Pakistan Engineering Council (PEC) which is signatory to the Washington Accord. In this regard, Directorate of Industrial Liaison & Alumni Affair (DILAA) is established with highly experienced, qualified and agile team, which formulates bridge between University and Industry, maintains liaison with alumni , and assist students in obtaining internships and jobs upon their graduation. DILAA works with industry to determine their operational problems and research needs. The DUET’s research teams then determine how best to conduct custom made research to meet industries specific needs. DILAA also works with different Educational Institutions to nurture the culture of out of box thinking in students by arranging Guest speaker sessions, workshops, and enhancement of presentation skills. DILAA arranges Internships programs for the third year students during summer and winter vacations. Most of the desirous students in recent past have successfully obtained internships with the assistance of DILAA. DILAA also arranges MOCK INTERVIEWS, through MOCK INTERVIEWS DILAA trains the graduating students for the competitive market. DILAA arranges annual Job fairs in which over two dozen renowned engineering participating companies are provided Graduate Profile Directory of DUET graduating students for hiring. DILAA also updates and maintains Alumni database on global basis.

10.10 Hostel/ Lodges

University does not offer any hostel facility to any student. University students make their own lodging and boarding arrangements. Since university is situated in center of the city, private accommodation is easily available at affordable cost.

Chapter: 04

Regulations


23

Regulations1. Mode of operation of the BS (Mathematics), evening program i. The BS Degree Program shall be operated in the Evening Shift. ii. The official timing shall be start from 04:00 p.m. iii. There shall be the five working days for this program. iv. The Saturday and Sunday shall be counted as non-working days.

2. Duration of an academic year 2.1 There shall be the two regular academic semesters in an academic year, commonly named as: i. Fall Semester ii. Spring Semester 2.2 The Fall Semester shall consist of 21 working weeks having the following descriptions: a. Classes / teaching : 16 weeks b. Mild Semester Examination : 01 weeks (including in 16 weeks of teaching) c. Preparation gap : 02 weeks d. Final Semester Examination : 03 weeks 2.3 The Spring Semester shall consist of 21 working weeks having the following descriptions: a. Classes / teaching : 16 weeks b. Mild Semester Examination : 01 weeks (including in 16 weeks of teaching) c. Preparation gap : 02 weeks d. Final Semester Examination : 03 weeks 2.4 However, the Summer Semester shall consist of 08 working seeks having the following descriptions: a. Class / teaching : 07 weeks. b. Mild Semester Examination : 01 weeks (including in 07 weeks of teaching) c. Preparation gap : 00 weeks d. Final Semester Examination : 01 weeks 2.5 There shall be the summer and Winter Vacations in an academic year: a. Summer Vacation : 08 weeks b. Winter Vacations :02 weeks 3.6 The total numbers of weeks in an academic year shall be 52 weeks.

3. Commencement of regulation semesters and summer semester i. Regular Semester:

The Fall Semester and Spring Semester shall be the Regular semester of an academic year. The Fall Semester shall be commenced from the month of September and ended in the month of February. The Spring Semester shall be commenced from the month of February and ended in the month of June.

ii. Summer Semester: The summer Semester shall be an optional semester of an academic year. The Summer Semester shall be commenced from the month of July and ended in the month of August. A student shall be offered theory and lab courses in the Summer Semester on the following conditions:

a. The student who wants to improve his/her grade point in any subject (i.e. F/D/D+) b. The student who was stopped to give the Final Semester Examination of any theory/ lab courses due to shortage of the class attendance in the regular semester.


24

c. The student shall opt minimum two theory courses and one lab course up to 08 credit hours for remedial work/ improvement of grade points. d The contact hour per week during the Summer Semester shall be doubled to ensure that thecourses are completely taught in a semester with half of the duration as compared to a regular semester (i.e., Fall/ Spring Semester).

4. Academic calendarThe University shall publish the schedule of the complete academic year for its Fall Semester, Spring Semester and Summer Semester for the convenience of students and faculty member.

5. Total period of study for the BS degree program A normal period of the 4-Year BS Degree Program is 4 year (eight semesters)

i. The Pro Vice Chancellor may allow the Fifth Year to a student, on the basis of the written request/ application, for the completion of BS Degree Program The written request/ application shall be forwarded by the concerned Chairperson and recommended by the Dean, Faculty of Engineering.

ii. The Vice Chancellor may allow the Sixth Year to any student, on the basis of the written request/ application, for the completion of BS Degree Evening Program. The written request/ application shall be forwarded by the concerned Chairperson and recommended by Dean, Faculty of Engineering and Pro Vice Chancellor.

iii. In case of further delay due to the genuine case/ hard ship, the Academic Council may allow the Seventh year to the student on the basis of written request/ application for the completion of BS Degree Program, duly recommended by the Vice Chancellor. The written request/application of the student shall be routed through the concerned Chairperson, the Dean, Faculty of Engineering and Pro Vice Chancellor.

iv. The name of student shall be dropped/struck off from the rolls of the University who does not complete BS Degree Program within 07 Years.

6. Requirements of credit hours and contact hours Credit Hours for the BS Degree Program:

(i) Minimum 130-136 credit hours are required for the 4 year BS Degree Program as recommended by the HEC. The said credit hours shall normally be earned by a student in the 8th Semester.

6.1 Credit Hours for the Semester: (i) The maximum load of credit hours of each regular semester shall be ranged/fixed from 15 to 18 credit

hours. 7.3 Credit hours for the Theory / Lab Courses and Final Year Project (FYP)(ii) Islamiyat and Pakistan Studies hall be the compulsory subjects of the First Year. The both courses shall

be of the 02 credit hours, the non- Muslims shall opt the subject of Ethics having the 02 credit hours in lieu of Islamiyat.

(iii) The theory course may range from 01 credit hour to 03 credit hours or as per the recommendation of Higher Education Commission (HEC), Islamabad provided from time to time.

(iv) The lab course may range from 01 credit hour to 02 credit hour or as per the recommendation of higher Education Commission (HEC), Islamabad provided from time to time.

(v) 01 credit hour in laboratory or practical work shall require 03 hours of lab contact per week throughout the semester.


25

(vi) Final Year Project (FYP) shall be of 06 credit hours.

6.2 Contract Hours for Theory / Lab Courses:(i) Minimum number of contact hours for a theory course of 02 credit hours per semester shall be 28 hours. (ii) Minimum number of contact hours for a theory course of 03 credit hours per semester shall be 42 hours. (iii) Minimum number of contact hours for a practical course 01 credit hour per semester shall be 42 hours. (iv) Minimum number of contact hours for a practical course of 02 credit hour per semester shall be 84 hours.

7. Roadmaps for courses and final year project (FYP)8.1 Theory / Lab Courses:(i) The University shall follow the Higher Education Commission (HEC), Islamabad scheme of studies

for the BS Degree Program for each discipline / technology. (ii) The scheme of studies shall be proposed by the respective Board of Studies, vetted by the board of

Faculty, recommended by the Academic Council and approved by the Syndicate. 8.2 Depth Elective Courses:

(i) The depth elective theory courses shall be formulated / designed by each Board of Studies according to the core domain. Specialization/ stream of its discipline/ technology, if any.

(ii) Each Board of Studies shall propose. Offer only four depth elective theory courses in the Scheme of Studies course Outline of their respective departments for each core domain/ specialization/ stream of its discipline/technology if any.

(iii) Those four depth elective theory courses shall be taught in the Fourth Year according to the following mechanism:

a. Two depth elective theory courses in the 7th Semester. b. Two depth elective theory courses in the 8th Semester.

8.3 Final Year Project (i) The Final Year Project (FYP) shall be offered in the 7th Semester and 8th Semester of the Fourth Year

having the equal credit hours (i.e, three credit hours for each regular semester). (ii) The Final Year Project shall be treated as theory course.

8. Requirement of attendance:(i) A student shall have 75% of the class attendance in each course to appear in the Final(ii) Semester Examination of 1st to 8th Semester. (iii) In case of valid reason/excuse, the maximum 10% condonation in the class attendance of one theory

course shall be the discretionary powers of the Dean, Faculty of Engineering on the basis of the written request / application of the student forwarded through the concerned Chairperson.

(iv) In case of valid reason/excuse, the maximum 10% condonation in the class attendance of two theory courses shall be the discretionary powers of the Pro Vice Chancellor on the basis of the written request / application of the student forwarded through concerned Chairperson and recommended by the Dean, Faculty of Engineering.

(v) The eligibility attendance (theory/lab courses) for the late admitted students of 1st Semester of First Year study only be calculated from the date of admission as mentioned in the letter issued from the Office of Registrar.


26

9. Evaluation system 9.1 Mid Semester Examination:

(i) The Mid Semester Examinations shall be conducted in the 8th week of each regular semester.(ii) The Mid Semester Examination shall be conducted only for the theory courses of the regular semester.(iii) The duration of the Mid Semester Examinations for theory course of 02 credit hours shall be 45

minutes. Whereas, the duration of the Mid Semester Examination for theory courses of 03 credit hours shall be 1.5 hours.

(iv) Each question paper for 02 and 03 credit hours theory courses shall (v) Contain 03 questions without any choice. (vi) The questions paper be descriptive for mid semester Examination No MCQs. Fill in the blanks and

objective types questions will be given in the question paper of mid Semester Examinations.(vii) The result of mid Semester Examinations shall be submitted to the office of Controller of Examinations

by the concerned theory course instructor/teacher within 10 working days after the end of Mid Semester Examinations.

9.2 Final Semester Examinations (Theory Course): (i) The Final Examinations shall be conducted in the 19th week of each regular semester.(ii) The Final semester Examinations shall be conducted for the theory course.(iii) The duration of the Final Examinations for theory course of 02 credit hours shall be 02 hours.(iv) The duration of the Final Semester Examinations for theory course of 03 credit hours shall be 03 hours.(v) Each question paper for 02 and 03 credit horse theory course contain 08 questions with the choice to

attempt the five questions, including 01 compulsory question.(vi) The question paper shall be descriptive for the Final semester Examination No MCQs, fill in the blanks

and objective.(vii) Home assignments and quizzes shall be submitted and given respectively by a student to the concerned

theory/practical course teacher as and when scheduled by the teacher.(viii) There shall be no Supplementary/Special Supplementary Examinations for the theory course of the

Final Semester Examinations in the semester system.(ix) The complete result of Final Semester Examinations for the theory course shall be submitted to the

office of controller of Examinations by the concerned External and Internal Examiner within 10 days after the end of the Final Semester Examinations.

9.3 Final Semester Examination (Lab Course)(i) The Final Semester Examinations of lab course shall be conducted in the 21th week of each regular

semester.(ii) The Final Semester Examination shall also be conducted for the lab course.(iii) The duration of the Final Semester Examination for lab course of 02 and 03 credit hours shall be 01

hour.(iv) MCQs fill in the blanks and objective types question shall be given in the question paper of Final

Semester Examination for lab courses.(v) Projects assignments of lab courses, if any, shall be submitted to the concerned practical course teacher

as and when scheduled by the teacher.(vi) There shall be no supplementary/ special supplementary examination for the lab courses of the final

semester Examination in the semester system.


27

(vii) The complete results of final Semester Examination for the lab course shall be submitted to the office of Controller of Examination by the concerned lab course instructor/teacher within 10 working days after the end of the final Semester Examination.

9.4 Final Year Project (FYP). (a) The following parameters shall be observed for the Final Year Project (FYP) in the 7th Semester.(i) Approval of Research Proposal by the Program Final Year Project (FYP) committee of the concerned

department.(ii) Initial defense/Seminar(iii) Draft of report/thesis containing preamble, dedication, contents of thesis chapters of introduction,

literature review and research/design/ simulation, Methodology,(iv) Mid defense/seminar(v) Viva Voice (b) The following shall observed for the Final Year Project (FYP) in the 8th Semester.(i) Approval of draft thesis/report by program FYP committee.(ii) Final defense presentation for thesis/project report.

(iii) Viva voice (iv) Submission of hard bounded final thesis report (pilgrims should be less than 19%)

10.5 Freezing of semester (i) In case of extreme hardship, a student may freeze his/her studies maximum for a period of one year

(two semesters) subject to the approval of the Vice Chancellor on the basis of written(ii) The student shall re-join the same in the semester in the next year in which she/he freeze the semester(iii) the freezing in 1st and 2nd Semester by the student shall not be allowed(iv) The freezing more than two more semesters (one year) by the student shall not be allowed.(v) Under special circumstances the freezing of 1st year may be considered and approve by the Vice

Chancellor on the following grounds. a. Iddat b. Maternity/ delivery c. Death in immediate family d. Hospitalization

10. Medical certificate The medical Certificate from a registered medical practitioner, duly endorsed by the Medical Officer of the university is acceptable for the freezing of the semester (may kindly be read in conjunction with Section 14).

11. Cancellation of enrollment If a student fails to attend any lecture during first four weeks after the commencement of the semester as per announced schedule, his/her admission shall stand automatically without any notification.

12. Grading system(i) Letter Grading (LG) shall only be used for representing the individual courses and not for semester

GPA or CGPA.


28

(ii) The fraction of marks in a theory course is to be counted as 1. For example 64.1 or 64.9 shall be counted/shown as 65.

(iii) Minimum possible grade point (GP) is 4.0.(iv) Minimum cumulative grade point average (CGPA) for award of the 4-Year BS Degree Program shall

be the 2.0 out of 4.0 CGPA. (v) The theory courses with “F” grade shall be counted as 0.0 Grade Point for calculation of Grade Point

Average (GPA) of the Semester. (vi) Equivalence in Letter Grades (LG), Grade Point (GP) and marks of theory / lab courses are shown in

the following table.

MarksdLetter Grade

(LG)Grade Point

(GP)Theory Course Lab Course

Maximum Marks 100

Maximum Marks 50

Maximum Marks 100

Maximum Marks 50

85 & above 42 & above 85 & above 42 & above A+ 4.0

80 to 84 40 41 80 to 84 40 41 A 3.7

75 79 37 39 75 79 37 39 B+ 3.5

70 74 35 36 70 74 35 36 B 3.0

65 69 32 34 65 69 32 34 C+ 2.5

60 64 30 31 60 64 30 31 C 2.0

55 59 27 29 55 59 27 29 D+ 1.5

50 54 25 26 50 54 25 26 D 1.0

Below 50 (fail) Below 25 (fail) Below 50 (fails) Below 25 (fail) F 0.0

Withdrawal W

Exempted E

12.1 Calculation of the score for a theory course having the fraction marks. The calculation of the score for a theory course having the fraction marks:

Examination Weight age Marks ObtainedAttendance 10% 8Test 5% 2.50Assignments 5% 3.75Mid Semester Examination 20% 1.5Final Semester Examination 60% 45%Total 100% 74.25%


29

The Score shall be rounded. Letter Grade (LG) in this case shall be B+. Grade Point (GP) for a theory course having fraction of marks shall be 3.5.

13. Calculation Of Quality Point (QP) And Grade Point Average (GPA) For A Semester i. Quality Point (QP):

Quality Point (QP) is determined by multiplying the value of the Grade point (GP) earned by a student in a course with credit hours of that course. For example : if a student earned A+ grade for a theory course of 03 credit hours, then the Quality Point (QP) shall be calculated as following:

Quality Point (QP) = 3.7 x 3 = 11.1 ii. Grade Point Average (GPA):

a. Grade Point Average (GPA) is the expression for the average performance of a student in the theory and lab course, he/ she has offered during the semester. This is calculated by adding the Quality Points of all courses taken by the students divided by the number of all credit hours offered in the particular semester. The following equation refers the Grade Point Average (GPA):

Grade Point Average (GPA) = Cumulative Quality Point (CQP) Sum of all credit hours b. In order to calculate the Grade Point Average (GPA) for the theory courses of any semester with

equal credit hours, the following table shall be referred:

Course No. Credit Hours Grade Grade Point Grade Point x 3 = Quality Points231 3 B 3.0 3.0x 3 = 9.0234 3 C+ 2.5 2.5x 3 = 7.5247 3 A 3.7 3.7x 3= 11.1250 3 A+ 4.0 4.0x3= 12271 3 F 0.0 0.0x3= 00

Cumulative Quality Point (CQP) = 39.6Total Credit Hours = 15Grade Point Average (GPA) = 2.64

In order to calculate the Grade Point Average (GPA) for the theory courses of any semester with unequal credit hours, the following table shall be referred.

Course No. Credit Hours Grade Grade Point Grade Point x 3 = Quality Points331 3 B 3.0 3.0x 3 = 9.0334 3 C+ 2.5 2.5x 3 = 7.5347 3 A 3.7 3.7x 3= 11.1350 2 A+ 4.0 4.0x2= 8.0371 3 B+ 3.5 3.5x3= 10.5379 2 D 1.0 1.0x2= 2.0Cumulative Quality Point (CQP) = 48.1Total Credit Hours = 16Grade Point Average (GPA) = 3.00


30

14. Calculation of cumulative grade point average (CGPA)

i. Cumulative Grade Point Average (CGPA)

Cumulative Grade Point Average (CGPA) is the expression describing the performance of a student in

all semester. IT shall be determined in the following way:

Cumulative Grade Point Average (CGPA) = Cumulative Quality Point for all the courses appeared

Sum of all credit hours for all the courses appeared

ii. The Cumulative Grade Point Average (CGPA) shall only be calculated when a student has passed all

the prescribed theory/ lab course for the award of BS Degree.

15. Improvement in a theory and lab course

(i) A student shall be allowed to opt the theory and lab courses up to maximum 08 credit hours in

the Summer Semester

(ii) The student who earned the “F/D/D+” grade in one or two courses in the 1st and 2nd Semesters, he/she

may be allowed to improve the one or two theory courses of only “F/D/D+” grade in the Summer

Semester to be offered after First Year.

(iii) The student who earned the “F/D/D+” grade in one or two course in the 3rd and 4th Semester, he/she


Semester to be offered after Second Year.

(iv) The student who earned the “F/D/D+” grade in one or two course in the 5th and 6th Semester, he/she


Semester to be offered after Third Year.

(v) The student who earned the “F/D/D+” grade in one or two course in the 7th and 8th Semester, he/she


Semester to be offered after Fourth Year.

(vi) Only one chance shall be granted for the improvement of a theory course having “D/D/+” grade.

(vii) However, the two chances shall be granted for the improvement of a theory course having the “F” grade.

(viii) The Dean, Faculty of Engineering may grant the permission to the student for the improvement of

theory courses having the “F/D/D+” grade (of any regular semester) in the Summer Semester on the basis


31

of the written request/ application of the student, duly recommended by concerned Chairperson.

16. Distribution of marks The distribution of marks for theory course, lab course and Final Year Project (FYP) shall be as under.

THEORY COURSES

Theory Course of 100 Marks Theory Course of 50 Marks

Attendance 10 05

Test (best of three) 05 03

Assignment 05 02

Mid Semester Exam 20 10

Final Semester Exam 60 30

Lab COURSES

Theory Course of 100 Marks Theory Course of 50 Marks

Attendance 10 05

Lab Evaluation Work 30 15

Semester Lab Examination 60 30

Objective Type Test 30 15

Conduct of Practical / viva voce 30 15

FINAL YEAR PROJECT

Sessional Work / Presentation 50

Project / Thesis Report 50

Comprehensive Viva-Voce Examination 100

17. Course file Maintaining the Course File is compulsory for all Faculty Members. The complete record of each academic activity shall be inserted in the file. The course file shall contain the following. a. Theory/ lab course code and title


32

b. Theory / lab course outlines/ contents or learning outcomes c. Theory/ lab course Syllabus and changes, if any, made over at least 3 semester, d. Weekly teaching plan of theory / lab courses. e. Academic Calendar. f. Grading Policy. g. Chart/table of distribution of marks for theory / lab courses. h. Chart/table of distribution of attendance marks in theory and lab courses. i. Copy of the Mid Semester Examination. j. Copy of the question paper for Final Semester Examination.

18. Distribution of attendance marksThe distribution of attendance marks for the theory courses and lab courses shall be as under:

For Theory Course of 03 Credit Hours having the 100 Marks

For Theory Course of 02 Credit Hours having the 50 Marks

Lecturer Hours Attended Marks To Be Awarded Lecturer Hours Attended Marks To Be Awarded

41 to 42 10 27 to 28 05

37 to 40 09 24 to 26 04

33 to 36 08 21 to 23 03

31 to 32 07 Below 21 00

Below 31 00

For Lab Course of 02 Credit Hours having the 100 Marks

For Lab Course of 01 Credit Hours having the 50 Marks

Lecturer Hours Attended Marks To Be Awarded Lecturer Hours Attended Marks To Be Awarded

95% to 100% 10 90% to 100% 05

86% to 94% 09 80% to 89% 04

81% to 85% 08 75% to 79% 03

75% to 80% 07 Below 75% 00

Below 75% 00


33

19. Probation (i) Probation is a status granted to the student whose academic performance fall below the minimum University standard. (ii) The student acquiring less than 2.00 / 4.00 GPA in a semester but passing in all papers of Theory / lab courses shall be promoted with the condition to achieve more than 2.00 GPA in the next semester, and he/ she shall be put on probation for the next semester. (iii) The Student acquiring GPA 1.5 and above but fails in any paper(s) of theory / lab courses shall be placed on probation and promoted to the next semester conditionally that he/she shall have to be registered in Summer Semester to improve the grade. (iv) Student acquiring less than 1.7 GPA in two consecutive semesters are failing in any paper(s) of theory/ lab courses even after attending the Summer Semester for one academic year shall be dropped from the rolls of University.

20. Special makeup classes If the university is closed due to unusual circumstances, the Special Make Up classes shall be arranged converting weekends or holidays to working days to cover the lapsed period of the students.

Chapter: 05

Courses


35

List of courses:Semester I

S. No. Course Code Course Title Credit Hours

1 MT-101 Calculus- I 3 + 0

2 MT-103 Discrete Structure and logic 3 + 0

3 HUM-101 English-I 3 + 0

4 PHY-101 Minor A-I 3 + 1

5 CHEM-101 Minor B-I 2 + 1

Total 14 + 2 = 16

Semester II


1 MT-102 Calculus- II 3 + 0

2 MT-104 Mathematical Methods 3 + 0

3 HUM-102 Islamic Studies 2 + 0

4 PHY-102 Minor A-II 3 + 1

5 CHEM-102 Minor B-II 3 + 1

Total 14 + 2 = 16

Semester III


1 MT-203 Algebra-I 3 + 02 HUM-201 English-II 3 + 03 PHY-201 Minor A-III 3 + 14 CS-201 Minor B-III 3 + 15 ENT-201 Minor C-III 3 + 0

Total 14 + 2 = 16

Semester IV


1 MT-202 Mechanics 3 + 02 MT-204 Differential Equation 3 + 03 HUM-202 Pakistan Studies 2 + 04 PHY-202 Minor A-IV 3 + 15 CS-202 Minor B-IV 3 + 1

Total 14 + 2 = 16


36

Semester V


1 MT-301 Topology 3 + 0

2 MT-303 Modern Algebra 3 + 0

3 MT-305 Real Analysis 3 + 0

4 MT-307 Mathematical Physics-I 3 + 0

5 MT-309 Scientific Computing 2 + 1

6 MT-311 Numerical Analysis-I 2 + 1

Total 16 + 2 = 18

Semester VI


1 MT-302 Differential Geometry 3 + 0

2 MT-304 Algebra-II 3 + 0

3 MT-306 Complex Analysis 3 + 0

4 MT-308 Mathematical Physics-II 3 + 0

5 MT-310 Mathematical Statistics-I 3 + 0

6 MT-312 Numerical Analysis-II 2 + 1

Total 17 + 1 = 18

Semester VII


1 MT-401 Number Theory 3 + 0

2 MT-403 Partial Differential Equation 3 + 0

3 MT-405 Fluid Dynamics 3 + 0

4 MT-407 Elective A-I 3 + 0

5 MT-409 Elective A-II 3 + 0

Total 15+ 0 = 15

Semester VIII


1 MT-402 Integral Equation 3 + 0

2 MT-404 Mathematical Statistics-II 3 + 0

3 MT-406 Research Methodology 3 + 0

4 MT-408 Elective A-III 3 + 0

5 MT-410 Elective A-IV 3 + 0

Total 15+ 1 = 15


37

ELECTIVE COuRSES


1 MT-407 Financial Mathematics 3 + 0

2 MT-408 Exploratory Data Analysis 3 + 0

3 MT-409 Simulation and modeling 3 + 0

4 MT-410 Polylogarithm 3 + 0

5 MT-411 Optimization methods 3 + 0

6 MT-412 Linear Algebra 3 + 0

Total 15+ 1 = 15

MINOR COuRSES


1 Minor A-I Physics-I 3 +1

2 Minor B-I Chemistry-I 2 + 1

3 Minor A-II Physics-II 3 + 1

4 Minor B-II Chemistry-II 3 + 1

5 Minor A-III Physics-III 3 + 1

6 Minor B-III Computer-I 2 + 1

7 Minor A-IV Physics-IV 3 + 1

8 Minor B-IV Computer-II 3 + 1

9 MINOR C-III Entrepreneurship 3+ 0

Total 25+ 8 = 33

Chapter: 06

Fee Structure


39

FEE AND OTHER MISCELLANEOuS CHARGES

1. Fee for local and foreign students (payable at the time of admission only):

i. Admission Fee

Local Students Foreign Students

a. Enrolment Fees (Once) 2,000

b. Documents Verification Fees (Once) 1,000

c. Smart Identity Card Fees (Once) 500

TOTAL Rs. 3,500/- USD 30/-

ii. Semester Fee:

Local Students Foreign Students

a. Tuition Fees (Per Semester) 25,000

b. Games Fees (Per Semester 3,000

c. Developmental Charges (Per Semester) 3,000

d. Transport Fees (Per Semester) 2,000

e. Laboratory/ Studio Fees (Per Semester) 1,000

f. Library Membership Fees(Per Semester) 1,000

TOTAL Rs. 35,000/- USD 300/-

iii. Examination Fee Students shall pay the semester examination fee/related fee(s) and other charges as approved by the competent authority.

2. ModificationsofRegulations: These regulations are subject to modification by the competent authorities of the University as may be felt appropriate from time to time

Chapter: 07

ADMISSION POLICY AND APPLICATION PROCESS


41

ADMISSION POLICY AND APPLICATION PROCESS

1.1 General Eligibility of Candidates

The candidate seeking admission in BS (Mathematics) Program, must meet the following eligibility

criterion.

(i) Intermediate with Mathematics, securing at least 50% marks in aggregate.

Or

(ii) Any other examination of a Foreign University / Institution /Examining Body, equivalent to

Intermediate with Mathematics. Equivalence and percentage of marks will be determined by IBCC.

Or

(iii) Diploma of Associate Engineering Examination, securing at least 60% marks in aggregate.

1.2 Ineligibility of Candidates

(i) The candidates who have passed the qualifying examination of 2018 in supplementary.

(ii) Convicted by a Court of law for an offense involving moral turpitude.

(iii) The candidate has not obtained equivalence certificate from the Chairman Inter Board Committee

Islamabad before last date of submission of application for pre admission (if applicable).

(iv) Candidate whose academic certificates are found tempered. A legal Criminal action would be

taken against such, candidate(s).

(v) Candidate who has already obtained admission elsewhere in Pakistan unless he/she submits

cancellation certificate of admission from the said institution.

1.3 Determination of merit position (i) The merit list of the candidates will be prepared according to following weightage.

Percentage of marks in multiplying weightage

a) Matriculation (or equivalent certificate) 10%

b) Intermediate (pre-Engg)/B.Sc (Pass)/Diploma (or equivalent certificate) 40%

c) Pre-admission entry test 50%

1.4 Based upon the above weightage the Composite Percentage Number (CPN) will be calculated as under

CPN= 0.1 [Percentage Marks in matriculation (or equivalent certificate)]

+ 0.4 [Percentage Marks in Intermediate (or equivalent certificate)]

+ 0.5 [percentage obtained in pre admission test].

1.5 In case of tie for merit position in the selection for admission, the tie will be resolved on the basis of marks obtained in pre-admission test. In case of further tie, it will be resolved on the basis of age.


42

2 Application Process

Phase 1.

2.1 Candidate has to register online with CNIC number at admissions.duet.edu.pk before filling up form.

Please save your password for onward use at admission portal. All information regarding admissions

will be communicated via Student Admission Portal and sms will be sent to candidate mobile numbers

to check admission portal whenever an update is ready.

2.2 After registration on admissions.duet.edu.pk student are required to fill up Admission Form present in

Admission Portal.

2.3 Candidates are requested to provide complete and true, personal / educational information in online

admission form. Please provide complete postal and permanent address for smooth communication of

admit cards / interview letters later on.

2.4 Candidates are required to upload recent passport size photograph in online admission application

form. Admit card will not be issued to candidates who uploaded casual pictures.

2.5 In the application form it is mandatory for candidates to provide their active mobile number for quick

alternative communication. The candidates shall be intimated through text message to see their data in

student portal, whenever there is an update. A candidate will be able to see only his / her own data by

logging in through his/ her CNIC number at admissions.duet.edu.pk.

2.6 Print Fee Voucher generated after submission of form and submit Rs. 1000/- in any branch of Sindh

Bank Ltd.

2.7 After verification of fee payment / picture, admit cards shall be available on the admission portal of

candidate (admissions.duet.edu.pk), which can be downloaded and printed by logging in with CNIC

number and password. SMS will be sent on given mobile numbers of the candidate only after admit

card generation. Candidate has to get admit card from online system. Admit card will be mandatory to

sit in exam.

2.8 DUET will conduct test in Dawood University of Engineering & Technology, Karachi

2.9 Candidates are not allowed to bring calculators, Mobile Phones or any other communication devices,

erasing fluids, ladies purse, bags, and books in test center premises. Any Candidate, if found, of

possessing any of the material mentioned above in the examination hall during the test shall be

disqualified from appearing in the test.

2.10 DUET shall announced result on website / student portal, having fields; Roll #, Name, Father’s Name,

CNIC and score within 7 working days after the test.

2nd Phase (Only for passed candidates of pre-admission test)


43

2.11 Minimum 40 marks Passing marks are required for DUET Pre-Admission Undergraduate Evening

program

2.12 Passed Candidates are required to take print of online admission application form by logging in to

student portal at admissions.duet.edu.pk with CNIC and password, sign the undertaking on the last

page and attach following documents.

(i) 4 Passport size recent photographs

(ii) HSC/DAE Combined mark sheet or Equivalence certificate in case of A-level

(iii) Copy of matric certificate

(iv) Copy of NIC / B Form

(v) Copy of Domicile

(vi) Copy of Father CNIC

2.13 Send admission application form along-with above mentioned document to Registrar, Dawood

University of Engineering & Technology New M A Jinnah Road Karachi.

2.14 After verification of documents provisional merit list will be issued with list of rejected candidates and

rejection reason, candidates shall ask to provide documentary proofs via email on admissions@duet.

edu.pk in 3 working days after which final merit list will be issued.

2.15 After Final merit list, CPN wise limited number of selected candidates shall be called for interview.

2.16 Merit lists shall be issued after interviews and scrutiny of documents.

2.17 The candidature of the applicant can be cancelled at any stage of the admission process even after the

announcement of result; if it was found that applicant do not fulfill the eligibility criteria of DUET.

2.18 Application form, application fee and documents attached with the application form are not returnable.

3 Scrutiny of the application and interview

(i) After the scrutiny of the application forms and announcement of the result of pre-admission test, the

merit list will be prepared and an appropriate number of students will be called to present themselves

before the admission committee for Interview and verification of original academic documents on the

notified dates.

(ii) The names of those candidates who fail to present themselves before the admission committee on the

scheduled date and time, without any intimation, shall be deleted from the merit list of the concerned

category. They shall not be considered for admission. Their absence shall amount to forfeit of their

right of admission. Any claim in this regard shall not be entertained.

(iii) Only original documents shall be accepted by admission committee. No exception shall be allowed.

The candidate must produce original first mark sheet of HSC issued by the concerned board at the time


44

of interview failing which his/her name will be deleted from the merit list.

(iv) On acceptance of admission the original intermediate combined mark-sheet shall be retained by

Admission Department.

(v) The decision of the admission committee shall be final. The selected candidates shall submit the

following forms (Available on University website) at the time of reporting to concerned Chairperson

of Department.

(a) Declaration of non-participation in political activities and non-indulgence in unwanted activities on

judicial stamp paper of Rs. 100.

(b) Medical fitness certificate

(c) Performa for University Identity Card.

(d) Enrolment form of University

4 Enrolment with DuET

The selected candidates will have to fill up enrolment form of the University and complete all the relevant

formalities for enrolment at the time of Interview. Without having Enrolment Card they will not be allowed

to appear in the semester examination.

5 Cancellation/ withdrawal of admission

(i) Concealment of facts at the time of seeking admission or non-submission of complete and genuine

documents or tempering with them or falsifying would mean that the student has been admitted

illegally. In such case the admission of the student shall be cancelled. University also reserves the right

to initiate legal action against such student.

(ii) The Competent Authority may cancel the admission of any student at any stage after giving an

opportunity of hearing at the appropriate forum.

(iii) Student who remains absent continuously for three weeks from the date of commencement of classes

without information to the authorities concerned/ chairman of the department, his /her admission shall

stand cancelled automatically without issuing any notice thereof.

(iv) Student who fails to appear in any complete semester examination shall not be eligible for promotion

to next semester. However, he/she can apply for re-admission in same semester with following Batch.

(v) In case of any discrepancy or misinterpretation, the decision of the competent authority shall be final

and binding on the applicant and shall not be challengeable in the court of Law.


45


46

Iqbal Campus:Dowood University of Engineering and TechnologyST-6, Block 17, Gulshan-e-Iqbal, Karachi-75300, PakistanTel: 99243874, 99243866, Email: [email protected]

Main Campus:Dowood University of Engineering and TechnologyM.A. Jinnah Road, Karachi-74800, PakistanTel: 99231195-98, 99230307, Fax: 92-21-99230710Email: [email protected]


Prospectus

BS MathematicsEvening Program

2018-19

DAWOOD UNIVERSITY OF ENGINEERING & …...DAWOOD UNIVERSITY OF ENGINEERING & TECHNOLOGY 7 The...

Documents

Transcript of DAWOOD UNIVERSITY OF ENGINEERING & …...DAWOOD UNIVERSITY OF ENGINEERING & TECHNOLOGY 7 The...