Datenblatt RUTEC polyurethan-756-de
1
PREMIUM RUBBER QUI RUTEC ® Anti-Splash Curtain R1078 Download this Datasheet as PDF: Storage RUTEC 1078 must be stored in accordance with regulations for storage of elastomers (DIN 7716). Remark All specifications are based on laboratory results and corresponds to our current knowledge stand. The above-mentioned informational purpose regarding our products and their use. This document is no guarantee of a particular property of performance of a product or its suitability for a particular application. We remind you that the data may chance in the course of further developments. Therefore we reserve the appropriate adjustments.. www.sgp-rutec.com RUTEC ® a brand of: S!" Spe#ial !ummi "rodukte !mb$ Raiffeisenstr. 37 · D - 46244 Bottrop· T. +49 (0) 20 45/414 16-0 Properties Method Values Polymer Natural rubber Colour Black Specific Gravity DIN 53508 1,10 g/cm 3 Hardness DIN 53505 40 ± 5 Shore A Tensile strengt (min.) DIN 53504 16,5 N/mm 2 Elongation at break (min.) DIN 53504 600 % Abrasion (max.) DIN 53516 100mm 3 Compression set (70AC/ 24 Std. /25% Druck) (max.) DIN 53517 30 % Tear strength (angle probe) DIN 53515 30 N/mm Resilience 75 % Charge in properties after heat aging (72 Std. Bei 70AC) ASTM D573 Hardness + 5 Shore A Tensile strengt + 10 / -15% Elongation + 10 / -15 % BCon resistance ASTM D1149 Fair Chemical resistance Diluted acids D alkalis Good Concentrated acids D alkalis Not recommended Bils Not recommended Solvent Not recommended Temperature range -40AC bis +70AC TEC$%&CA' (ATA "R)(UCT (ESCR&"T&)% RUTEC 1078 is an excellent black natural rubber Euality and distinguished by exceptional elasticity and good UV and oCone resistance. RUTEC rubber is manufactured in certified production according to the reEuirements of ISB 9002 standards.
Transcript of Datenblatt RUTEC polyurethan-756-de
PREMIUMRUBBERQUALITY
RUTEC® Anti-Splash Curtain R1078
Download thisDatasheet as PDF:
Storage
RUTEC 1078 must be stored inaccordance with regulations forstorage of elastomers (DIN 7716).
Remark
All specifications are based on laboratoryresults and corresponds to our currentknowledge stand. The above-mentionedinformational purpose regarding ourproducts and their use. This document is noguarantee of a particular property ofperformance of a product or its suitabilityfor a particular application. We remind youthat the data may chance in the course offurther developments. Therefore we reservethe appropriate adjustments..
www.sgp-rutec.comRUTEC® a brand of:SGP Spezial Gummi Produkte GmbHRaiffeisenstr. 37 · D - 46244 Bottrop· T. +49 (0) 20 45/414 16-0
Properties Method Values
Polymer Natural rubber
Colour Black
Specific Gravity DIN 53508 1,10 g/cm3
Hardness DIN 53505 40 ± 5 Shore A
Tensile strengt (min.) DIN 53504 16,5 N/mm2
Elongation at break (min.) DIN 53504 600 %
Abrasion (max.) DIN 53516 100mm3
Compression set(70°C/ 24 Std. /25% Druck) (max.)
DIN 53517 30 %
Tear strength(angle probe)
DIN 53515 30 N/mm
Resilience 75 %
Charge in properties afterheat aging(72 Std. Bei 70°C)
ASTM D573
Hardness + 5 Shore A
Tensile strengt + 10 / -15%
Elongation + 10 / -15 %
Ozon resistance ASTM D1149 Fair
Chemical resistance
Diluted acids & alkalis Good
Concentrated acids &alkalis
Not recommended
Oils Not recommended
Solvent Not recommended
Temperature range -40°C bis +70°C
TECHNICAL DATA
PRODUCT DESCRIPTION
RUTEC 1078 is an excellent black natural rubber quality anddistinguished by exceptional elasticity and good UV and ozoneresistance.
RUTEC rubber is manufactured in certified production according tothe requirements of ISO 9002 standards.
