Datasheet 200277 - MV-RAD - 20
1
Accredited ISO/IEC 17025 According to European standards Non Impacting Safe & Reliable Torque + angle function 78 mm 210 mm 310 mm 69 mm 60 mm 98,5 mm 2019 - V.01 WWW.RADTORQUE.EU MV-RAD 20 Part Number: 200277 DIMENSIONS IN MM TOOL KIT INCLUDING SUITABLE REACTION ARMS ACCESSOIRES • MV-RAD 20 • Standard reaction arm (PN: 14213) • Retaining ring (PN: 17367) • Calibration certificate • Usermanual • Safety instructions on USB stick • Weatherproof storage case * Test results from RAD’s certified calibration lab TORQUE + ANGLE FUNCTION Standard Deep socket Double ended Blank Double ended blank Safety sliding PN: 14213 PN: 18480 PN: 19094 PN: 17888 PN: 19093 PN: 25242 SPECIFICATIONS • TORQUE RANGE: 200 - 2.000 Nm. • SPEED: 5 RPM. • WEIGHT: 4,3 Kg, excluding reaction arm and socket. • SQUARE DRIVE: 1 inch square drive. • NOISE LEVEL: Maximum 78 dB. • TORQUE SETTING: 1 Nm incremental or 200 torque settings. • PRESETS: - programmable presets. • INTELLIGENT COUNTER: maintenance counter. • REPEATABILITY ON SAME JOINT * : +/- 3,5%. DIGITAL TORQUE SETTING MAINTENANCE COUNTER 200 - 2.000 Nm MAX SPEED 5 RPM TORQUE CHECK FUNCTION OPTION Product Part number Swivelling tool handle (option) On request Tool hanger (option) On request 120V version (option) 17303
Transcript of Datasheet 200277 - MV-RAD - 20
AccreditedISO/IEC 17025
According toEuropean standards
NonImpacting
Safe &Reliable
Torque + anglefunction
78 mm
210 mm
310 mm
69 mm
60 mm
98,5 mm
2019 - V.01 WWW.RADTORQUE.EU
MV-RAD 20Part Number: 200277
DIMENSIONS IN MM TOOL KIT INCLUDING
SUITABLE REACTION ARMS
ACCESSOIRES
• MV-RAD 20• Standard reaction arm (PN: 14213)
• Retaining ring (PN: 17367)
• Calibration certi� cate• Usermanual• Safety instructions on USB stick• Weatherproof storage case
* Test results from RAD’s certi� ed calibration lab
TORQUE + ANGLE FUNCTION
Standard Deep socket Double ended
Blank Double ended blank Safety sliding
PN: 14213 PN: 18480 PN: 19094
PN: 17888 PN: 19093 PN: 25242
SPECIFICATIONS• TORQUE RANGE: 200 - 2.000 Nm.• SPEED: 5 RPM.• WEIGHT: 4,3 Kg, excluding reaction arm and socket.• SQUARE DRIVE: 1 inch square drive. • NOISE LEVEL: Maximum 78 dB.• TORQUE SETTING: 1 Nm incremental or 200 torque settings.• PRESETS: - programmable presets.• INTELLIGENT COUNTER: maintenance counter.• REPEATABILITY ON SAME JOINT *: +/- 3,5%.
DIGITAL TORQUE SETTING
MAINTENANCE COUNTER
200 - 2.000 Nm
MAX SPEED 5 RPM
TORQUE CHECK FUNCTIONOPTION
Product Part numberSwivelling tool handle (option) On request
Tool hanger (option) On request
120V version (option) 17303
