Data Tecnica Hydrosteel Gli9900-Front
1
DESCRIPTION COMPOSITION FEATURES SPECIFICATION DATA Imperme-A-Seal ™ HYDROSTEEL 9900 ™ 100% Acrylic Resin Titanium Dioxide and Extender Pigments Not manufactured with lead or mercury containing materials. Color: White Clean-up Solvent: Soap & water Density: 11.48 lbs/gal (1.38 kg/L) VOC: 100 g/L (0.84 lbs/gal) maximum Refer to MSDS for regulatory VOC content of complete product line Solids: Volume - 55% +/- 1% Weight - 68% +/- 1% Practical Coverage: 250 sq.. feet / pail at 20 mils wet. 500 sq.. feet / pail at 10 mils wet. * However, this depends on the porosity and texture of the surface. Recommended Film Thickness: 18 - 20 mils wet 9- 12 mils dry Flash Point: None Dry Time: 77°F (25°C) & 50% RH To touch - 15 minutes To walk on - 48 hours Shelf Life: 1 year minimum - unopened Imperme-A-Seal ™ HYDROSTEEL 9900 ™ Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page. DSF1-0690 - Will reduce interior temperature up to 31% - High build, water base formula - No primer needed - Low odor formulation - Resist ponding water up to 24 hours - One coat application - Applies blue, dries white - Provides a mildew and algae resistance coating - Energy star certified - CRRC certify - Complies with ASTM 6083 Is a water - based high performance roof sealer which is just one coat can deliver the optimum coverage and film thickness. The high build technology in this formula provides a durable and flexible protection for every type of roof. This formula performs as a barrier from the IV rays and heat, reducing the interior temperature of the applied area. Recommended for concrete, metal bricks, plaster, wooden and polyurethane foam
-
Upload
tommycasillas-gerena -
Category
Documents
-
view
221 -
download
6
description
guide for application
Transcript of Data Tecnica Hydrosteel Gli9900-Front
DESCRIPTION
COMPOSITION
FEATURES
SPECIFICATION DATA
Imperme-A-Seal™ HYDROSTEEL 9900™
100% Acrylic Resin Titanium Dioxide and Extender Pigments Not manufactured with lead or mercury
containing materials.
Color: White
Clean-up Solvent: Soap & water
Density: 11.48 lbs/gal (1.38 kg/L)
VOC: 100 g/L (0.84 lbs/gal) maximum Refer to MSDS for regulatory VOC content of complete product line
Solids: Volume - 55% +/- 1% Weight - 68% +/- 1%
Practical Coverage: 250 sq.. feet / pail at 20 mils wet. 500 sq.. feet / pail at 10 mils wet. * However, this depends on the porosity and texture of the surface.
Recommended Film Thickness: 18 - 20 mils wet
9- 12 mils dry
Flash Point: None
Dry Time: 77°F (25°C) & 50% RH To touch - 15 minutes To walk on - 48 hours
Shelf Life: 1 year minimum - unopened
Imperme-A-Seal™HYDROSTEEL 9900™
Read Label and Material Safety Data Sheet Prior to Use. See other cautions on last page. DSF1-0690
- Will reduce interior temperature up to 31% - High build, water base formula - No primer needed - Low odor formulation - Resist ponding water up to 24 hours - One coat application - Applies blue, dries white - Provides a mildew and algae resistance coating - Energy star certified - CRRC certify - Complies with ASTM 6083
Is a water - based high performance roof sealer which is just one coat can deliver the optimum coverage and film thickness.The high build technology in this formula provides a durable and flexible protection for every type of roof. This formula performs as a barrier from the IV rays and heat, reducing the interior temperature of the applied area. Recommended for concrete, metal bricks, plaster, wooden and polyurethane foam
