Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP...

of 16 /16
Data Cables European Edition

Transcript of Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP...

Page 1: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Dat

a Cab

les

European Edition

Page 2: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Belden Data CablesBelden Data Cables

Reliability, performance

Over the years, Belden has become an international byword for premium quality andreliability, an accolade for excellence earnedthrough decades of dedication to meetingthe highest industry standards. Our strategicobjective is to provide our customers withsuperior solutions for their present and futurewire and cable needs. Accordingly, every solution we devise is based on performance,innovation and reliability – the three corner-stones of Belden’s business strategy.

Reliable Performance through Innovation

A long history of innovationFor the past 100 years, Belden has been anacknowledged front-runner in the wire andcable industry, developing novel technolo-gies and processes for the manufacture ofinnovative wire and cable products. Productsthat keep our customers at the forefront ofnew developments in their chosen field.

Starting in 1902, when the company was founded in Chicago, Belden has consistentlypioneered breakthrough technologies andset new industry standards. This trend wasset with early successes like Beldenamel insulation (1905) and the introduction of thesoft rubber plug in 1927. Ever since, Beldenhas been an industry innovator, conceivingand developing special applications in ca-bling, shielding and jacketing. All focused on customer needs. All clearly establishingBelden’s leadership in wire and cable tech-nology.

Belden’s commitment to innovation has historically fuelled new growth for industryplayers. It has also earned Belden global innovation leadership that is constantly driven by the Belden Engineering Centres.For instance with Duobond®, Flamarrest®,

French Braid™, MediaTwist® and DataTwist®

600e. Another yardstick for measuring thesuccess of our novel products are the manypatents we hold. But the ultimate criterion isthe fitness for use of the products we supplyto our customers.

Table of ContentsReliable Performance through Innovation

Belden Quality

Cable Finder

Unshielded cablesUTP Category 5E

UTP Category 6

Shielded cables(S)FTP Category 5E

(S)FTP Category 6

ISTP Category 7

Ordering Information & DataTwist® Colour Code Table

1 – 2

3 – 4

5

6 – 7

8 – 10

11 – 12

13

14

14

Page

Global playerThe company’s successful growth strategyin the 1990s led in 1999 to the purchase ofCable Systems International, the largestspecialty telecom cable facility in the world.Other capabilities were created by acquisi-tions in Hungary, United Kingdom, the USAand the Netherlands, where Belden has itsEuropean headquarters and a large R&DCentre and manufacturing facility. Apartfrom Europe and the US, Belden’s world-wide presence includes marketing and salesorganizations in Asia Pacific, Latin Americaand the Middle East.

Today, Belden is a global player in the wireand cable industry, designing, manufacturingand marketing specialty cable, such as copper,and optical fibre cable for electrical, electronicand communications equipment. Reliableproducts that help Belden’s customers keeppace with the shifting dynamics of thesefast-moving markets.

1

Page 3: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

LYON

VENLO

NYNÄSHAMN

VILLINGEN-SCHWENNINGEN

MOSCOW

MILANO

ManufacturingFacilities

Distribution Centers

Sales Offices

The Netherlands

European manufacturing operationsAs Belden’s global business plans call for a commitment to local markets world-wide and a thorough understanding of local dynamics, Belden has establisheda very significant presence in core European markets. This ensures that appropriate solutions can always be found to meet the cable and wire needs of our European customers.

Belden has the largest range of cable products in all the marketswe serve. Dedicated products matched to local needs. These include over 10.000 products for computer networking and computer equipment; for telecommunications and industrial instrumentation and control; for broadcasting and entertainment;and for cable television and electrical equipment.

With European sales accounting for almost a quarter of Belden’s world-wide turnover, Belden has clearly demonstrated the successof its ‘Think global, act local’ approach. And with its 1000-strong workforce across Europe – and sales offices from Moscow to Lyon and from Stockholm to Dubai – Belden has a strong local capability to understand customers’ problems and to provide the answer.

Belden’s European headquarters and manufacturing base is in the Netherlands, where the company also has its European Engineering Centre.

● Digital telephony cables● Shielded and non-shielded cables● Multi-conductor cables● Optical fibre cables● Audio/video cables● Coaxial broadband cables● Electrical cables

To request detailed brochures and data-sheets on our product lines and the extensiveBelden Master Catalog, please contact yourlocal Belden representative or send an e-mail to [email protected]

Addressing environmental issues correctly is recognized as a high priority, particularly in the industrialized world and not least atBelden. Accordingly, the company makesevery effort to minimize the environmentalimpact of its operations and products.

Recognizing ecological concerns shared by customers and consumers world-wide,from 1999-2001 a working group at Belden’sEuropean headquarters in Venlo completed

comprehensive preparations for ISO 14001EMS certification. This environmental man-agement and audit system was implementedand certified in 2001. The progress achievedin the practical implementation of Belden’senvironmental objectives will be publishedeach year. This will include the measurestaken by the company to minimize the envi-ronmental impact of Belden’s operations,also in respect of (energy) savings in produc-tion and novel materials and processes.

Detailed brochuresFull-colour brochures are available on theextensive range of Belden products:

ISO 14001 EMS – Environmental Management System

USA United Kingdom

BUDAPEST

Reliable Performance through Innovation

MANCHESTER

2Table of Contents

Page 4: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Belden Data CablesBelden Data Cables

Monitoring & maintaining quality Before releasing any new products for production, all critical charac-teristics, such as dimensions, electricals, and physicals are targetedto meet a capability index (Cpk) ≥ 1.33, which corresponds to a99.997% passing rate. A Cpk is an index that quantifies the capabilityof a product’s design and manufacturing process. It takes the actualperformance of a product and compares it to a benchmark level ofperformance (e.g.: the industry standard).

The Cpk values are determined through capability studies, whichrepresent the final product design and manufacturing set-ups. Thisincludes statistically valid run times, sampling quantities and methods.The result is a Cpk value that corresponds to a predicted defect ratefor the product.

Based on these statistics (measuring 100% is simply not possible)99.997% of the Belden products will pass the applicable cable standards. If Belden specifies headroom above a cable standard this will always means in addition to the Cpk = 1.33 range (4�).

Variation of a product characteristics that performs just within our specification.

Belden’s Cpk testing methods are actually more reliable than simple“pass/ fail” testing on cable as it comes off the manufacturing line.Rather than merely testing batches of cable, Cpk testing allowsBelden to monitor and control the long-term quality and performanceof the cable we produce. Cpk’s are tracked constantly through PlantQuality Assurance, using in-house developed Quality Data AcquisitionSystems. The generated Cpk values give us an accurate measurementof quality over time, and are used to drive continuous quality improve-ments.It enables us to adjust our manufacturing processes in ways that ensurethe production of high performance cable, day in day out.

Belden Quality

The Belden approach to cable quality

Belden’s commitment to quality begins even before its products leavethe product development phase. Not only does Belden design productsto achieve a given level of performance, it also ensures that theseproducts can be manufactured in a way that makes that performancepossible and consistent.

The keyword in the Belden approach is prevention. Prevention involvesthe use of key parameters of product performance and statistical methods to monitor the process and identify changes that affect the quality of the product and adjust the process accordingly. The responsibility for quality moves from the inspectors to the design and manufacturing departments.

Product quality at Belden begins long before we ever manufacture a single meter of cable. Here’s a look at how we do it:

Design for manufacturabilityDelivering a superior product means being sure you make a superiorproduct, day after day. Design for Manufacturability (DFM) seeks toidentify and account for the challenges inherent in any manufacturingprocess and address them up front. It takes into account every aspectof manufacturing: materials, machines, operations, environmental factors, and more.

The purpose of DFM is to design products that are robust enoughto stand up to the challenges of manufacturing to yield consistent,superior product quality. DFM is focused on the entire manufacturingprocess and how it can be monitored, controlled, and adjusted toachieve our quality goals.

The benefit to Belden customers is that our products achieve highperformance standards that are both consistent and measurable.

Test lab Belden Engineering

Centre

Headroom (average worst case margin from spec.)

3 x Standard deviationCpk =

99.7% of Product

Avg: 4.0 dB

7.0 dB1.0 dB

Lower Spec.

99.997% of Product

3� = 1.0 Cpk

� = 1.0

4� = 1.33 Cpk = Design Goal

+3� +4�

–10 – 5 0 5 10 15 20

– 3�– 4�

3 Table of Contents

Page 5: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Bonded pairsInstalled performance is the performance of a channel in real worldinstallation conditions. Common real world conditions include the useof cable that have experienced severe flexing when pulled aroundbends and corners and cable coiled into service loops and/or stuffedinto outlet boxes. The Belden Bonded Pair cables provide betterinstallable performance™, due to its unique, patented design.

Better by design

For a twisted pair cable, a solid design begins with the individual con-ductors and their relationship to one another forming a pair.An ideal pair is comprised of two perfectly balanced insulated conductorsthat are mirror images of each other. The copper used in the two con-ductors is identical – with exactly the same dimensions – and is alsoperfectly centered, or concentric, within each insulated conductor.

The ideal twisted pair, with perfect centricity and concentricity.

To maintain this perfect balance, the center-to-center distance, orcentricity, between the copper conductors must remain fixed andshould never vary – not even in the slightest! In balanced signal trans-mission on an ideal pair, these concentricity and centricity factors helpensure that the signal does not radiate or bleed off the pair and thatthe pair cancels out all incoming noise.When the conductors of a twisted pair become separated, impedancemismatches, Return Loss (RL), and crosstalk problems arise. In orderto prevent this separation from occurring and to provide structuralstability, Belden has developed its patented Bonded Pair technology.As the picture illustrates, even when a Bonded Pair cable is bent, itsconductor-to-conductor spacing remains stable.

Only a Bonded Pair will not gap when the pair is bent around a corner.

Belden Quality

Design dictates performance

Belden Bonded Pair cables are designed to maintain their outstandingperformance after installation. To demonstrate this, an InstallationStress Test has been designed and implemented. To simulate pullingthe cable through and around cable trays, ceilings and walls, eachcable was run through a series of controlled bends and twists.Next, the end of the cable was placed into an outlet box, and a 3 meterlength of the cable was loosely coiled into a service loop at the workstations end. The cables were tested before and after the test to identify any changes in performance.

If we compare the RL values of the Cat5E Belden Bonded Pair cablevs. an industry leading Cat5E cable we find that the Unbonded Paircable’s RL value degraded by more than 12 dB, or more than 15 timestheir before-installation values.

Belden’s Bonded Pair cables exhibited little change in RL perform-ance. (For more detailed information, please refer to Belden TechnicalBulletin TB-66, The Impact of Typical Installation Stresses on cablePerformance.)

Performance reduces costs

To further document the after-installation performance of both BondedPair and Unbonded Pair cables, Belden surveyed a large number ofcontractors regarding their installation experiences.This survey showed a clear difference between the two cable typesafter installation was complete and field testing was conducted to verify compliance with industry standards, both proposed Category 6and Category 5E. It showed that the Belden Bonded Pair cables causesignificantly less test failures compared to Unbonded Pair cables.In fact, with Bonded Pair cables time savings of up to 1.5 minutes per drop (Cat 5E) and 2.5 minutes per drop (Cat 6) can be expectedbecause far less troubleshooting and re-work is required.(For more detailed information, please refer to Belden Technical Bulletin TB-67, Contractor Field-Testing Survey Reveals Performance-Related Cost savings Using Bonded Pair Cables.)

Industry 350 MHz Cat 5e Cable Return Loss Margins(20 – 100 MHz)

Belden DataTwist 350 Cat 5e Return Loss Margins(20 – 100 MHz)

Data Pairs Blue Orange Green Brown

Hig

her

is b

ette

r

Mar

gin

(d

B)

Mar

gin

(d

B)

Installed

Initial Installed

Initial

Fai

lH

igh

er is

bet

ter

Spec.Limit

Spec.Limit

Centricity

Centricity

Unbonded Pair Bonded Pair

4Table of Contents

Page 6: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

ISTP Category 7

(S)FTP Category 6

Shielded Cables

(S)FTP Category 5E

UTP Category 6

UTP Category 5E

Unshielded Cables

Belden Data CablesBelden Data CablesCable Finder

1583E1583ENH1667E1667ENH1700A1700ANH1702E1702ENH1592A1592ANH1752A1752ANH

7965E7965ENH7812E7812ENH1872A1872ANH1875GB7851A7851NH

1633E1633ENH1668E1668ENH1730A1730ANH1633E+1633ENH+1668E+1668ENH+1868E1868ENH

7860E7860ENH7860E+7860ENH+

1885ENH1887ENH

Belden partnumber

XXXX

XXXXX

XX

USproduct

● All specification limits according to ISO/IEC 11801 2nd. Edition (September 2002), unless otherwise stated. All values at frequencies below 4 MHz in this brochure are for reference only, in accordance with ISO/ IEC 11801.

● Typical values represent values from multiple tests of our products. These numbers are not guaranteed but are designed to give the user an idea of the products typical capabilities. The minimum/maximum values are guaranteed values.

● For ordering information see page 14.

XXXXXXXX

XXXX

XXXX

XXXXXX

XXXX

XX

Europeproduct

Twin 1583ETwin 1583ENHDataTwist® 350DataTwist® 350

Twin 1700ETwin 1700ENH

DataTwist® PatchDataTwist® Patch

DataTwist® 350 PatchDataTwist® 350 Patch

MediaTwist®

MediaTwist®

MediaTwist® PatchDataTwist® 600eDataTwist® 600e

Twin 1633ETwin 1633ENH

Braided 1633EBraided 1633ENH

Twin 1633E+Twin 1633ENH+

PatchPatch

Braided 7860EBraided 7860ENH

Twin 1885ENH

Description

100100100100350350350350350350350350

250250250250350350350600600

100100100100100100100100100100100100

250250250250

10001000

Tested tofrequency

(MHz)

NH jacket

NH jacketbonded pairs

bonded pairs, NH jacketbonded pairs

bonded pairs, NH jacket

NH jacketbonded pairs

bonded pairs, NH jacket

NH jacketbonded pairs

bonded pairs, NH jacketbonded pairs

bonded pairs, NH jacketbonded pairsbonded pairs

bonded pairs, NH jacket

NH jacket

NH jacketbonded pairs

bonded pairs, NH jacket

NH jacket

NH jacket

NH jacket

bonded pairsbonded pairs, NH jacket

bonded pairsbonded pairs, NH jacket

NH jacketNH jacket

Remarks

XXXXXXXX

XXXX

XXXX

XXXXXX

XXXX

XX

EN50173-1

XXXXXXXXXXXX

XXXXXXXXX

TIA/EIA568-B2

XXXXXXXXXXXX

XXXXXXX

XXXXXXXXXXXX

XXXX

XX

ISO/IEC11801

2nd ed.

666666667777

8888999

1010

111111111111121212121212

13131313

1414

Page

Origin Industry standards

Notes:● Plenum versions and various multipair cables

available upon request.● Please check for available outdoor cables.

5 Table of Contents

Page 7: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

UTP Category 5E

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 94Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 0.90

Nominal overall diameter (mm): 5.0Impedance (Ohm): 100 Ohm ± 15 %Energy of flame (kJ/m):

Single TwinE 312 626ENH 310 621

Belden 1583ENH Halogen-free version

Belden 1667E Twin version of 1583E

Belden 1667ENH Twin version of 1583ENH

Product description

Unshielded Twisted Pair Cable, 4 pairs x AWG 24. Solid bare copper conductors, polyolefine insulation. Colour code: see DataTwist® colour code table on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801, TIA/EIA 568-B2

max. (Cat. 5E)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.11.9657362716171

63.271

60.269

20.031

4.03.9566453624959

52.361

49.358

23.033

5.75.6525949574353

46.154

43.151

24.541

6.36.2505847564151

44.052

41.050

25.042

8.07.9475544533746

39.248

36.245

25.041

9.08.9465443523543

36.845

33.843

25.041

10.19.9445341513342

34.242

31.241

24.339

11.411.2435140493139

31.540

28.538

23.636

16.516.0384735452533

21.831

18.829

21.534

21.319.8354432422128

14.024

11.022

20.132

1 4 8 10 16 20 25 31.25 62.5 100

Standard lengths (put-ups): Standard weight:U 1000 ft. U 305 m 8.5 kg

1000 ft. 305 m 8.5 kg1640 ft. 500 m 14.0 kg3280 ft. 1000 m 28.0 kg

Belden 1583E Cat. 5E

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 94Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 0.95

Nominal overall diameter (mm): 5.0Impedance (Ohm): 100 Ohm ± 15 %Energy of flame (kJ/m):

Single TwinA 305 610ANH 298 596

Belden 1700ANH Halogen-free version

Belden 1702A Twin version of 1700A

Belden 1702ANH Twin version of 1700ANH

Product description

Unshielded Twisted Pair Cable, 4 bonded pairs x AWG 24, ripcord. Solid bare copper conductors, polyolefine insulation. Colour code: see DataTwist® colour code table on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801, TIA/EIA 568-B2

Flame test: UL CM UL ISDI Vertical Tray, CSA FT1

max. (Cat. 5E)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.11.9657362716171

63.271

60.269

20.031

4.03.9566453624959

52.360

49.358

23.033

6.36.2505847564151

44.052

41.050

25.040

8.07.9475544533746

39.247

36.245

25.042

9.08.9465443523543

36.845

33.843

25.042

11.411.2435140493139

31.540

28.538

23.642

16.516.0384735452533

21.831

18.829

21.541

21.319.8354432422128

14.024

11.022

20.141

–25.0

–40–

38–

25–

15–

13–

37

–28.5

–38–

36–

23–

10–8–

37

1 4 10 16 20 31.25 62.5 100 155 200–

35.9–

36–

34–

19–––––

35

310–

38.5–

35–

33–

18–––––

34

350

Standard lengths (put-ups): Standard weight:U 1000 ft. U 305 m 8.5 kg

1000 ft. 305 m 8.5 kg1640 ft. 500 m 14.0 kg3280 ft. 1000 m 28.0 kg

Belden 1700A DataTwist ® 350 Bonded pairs Cat. 5E

6Table of Contents

Page 8: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Belden Data CablesBelden Data CablesUTP Category 5E

Frequency (MHz)Attenuation (dB/100 m)

PS-NEXT (dB)

PS-ELFEXT (dB)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, Blue, Red, Green, Yellow, Orange, Violet, White, BlackVelocity of propagation (%): 69Typ. DCR (Ohm/100 m): 7.9Nominal capacitance (pF/ ft.): 15Diameter of insulated conductor (mm): 0.99

Nominal overall diameter (mm): 8.0Impedance (Ohm): 1 – 100 MHz: 100 ± 15 %

100 – 250 MHz: 100 ± 25 %

Belden 1592ANH Halogen-free version Product description

Unshielded Twisted Pair Cable, 4 pairs x AWG 24. Stranded bare copper conductors, polyolefine insulated singles, PVC jacket. Colour code: see DataTwist® colour code table on page 14.

Applicable industry standards: TIA/EIA 568-B2 , ISO/ IEC 11801

Flame test: UL CM UL 1581 Vertical Tray, CSA FT1

guaranteed max.typical

guaranteed min.typical

guaranteed min.typical

guaranteed min.typical

guaranteed min.typical

2.51.962.373

60.869

59.871

20.025

1

Standard lengths (put-ups): Standard weight:U 1000 ft. U 305 m 9.5 kg

1000 ft. 305 m 9.5 kg

Belden 1592A DataTwist® Patch Cat. 5E

4.94.153.363

48.751

48.459

23.028

47.86.647.357

40.848

39.550

25.033

109.98.444.354

36.746

34.446

25.033

1611.19.342.853

34.743

31.744

25.033

2012.510.541.351

32.841

28.841

24.332

2514.111.839.950

30.939

25.838

23.631

31.2520.416.735.445

24.833

15.028

21.529

62.526.421.432.342

20.8295.921

20.128

10033.726.929.540

16.925––

15.827

15538.931.727.839

15.023–8

15.026

200–

36.7–

31–––––

24

25045.338.5

–29–––––

22

350

Frequency (MHz)Attenuation (dB/100 m)

PS-NEXT (dB)

PS-ELFEXT (dB)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, Blue, Red, Green, Yellow, Orange, Violet, White, BlackVelocity of propagation (%): 70Typ. DCR (Ohm/100 m): 8.6Nominal capacitance (pF/ ft.): 15Diameter of insulated conductor (mm): 0.99

Nominal overall diameter (mm): 8.0Impedance (Ohm): 1 – 100 MHz: 100 ± 15 %

100 – 250 MHz: 100 ± 25 %

guaranteed max.typical

guaranteed min.typical

guaranteed min.typical

guaranteed min.typical

guaranteed min.typical

2.41.965.376

69.873

62.972

20.029

1

Standard lengths (put-ups): Standard weight:U 1000 ft. U 305 m 11.3 kg

1000 ft. 305 m 11.3 kg

4.83.956.372

48.771

51.566

23.031

47.76.250.363

40.863

42.655

25.034

109.87.947.361

36.748

37.551

25.034

1611.09.045.860

34.745

34.849

25.035

2012.410.245.357

32.843

32.045

24.335

2513.911.042.955

30.941

29.042

23.635

31.2520.115.938.453

24.835

18.235

21.535

62.526.120.735.350

20.8319.327

20.133

10033.326.232.547

16.928–

1920.033

15538.430.830.845

15.025–

1219.031

20043.735.829.343–––7

18.0*30*

25053.245.327.242––––

17.030

350

Belden 1752ANH Halogen-free version Product description

Unshielded Twisted Pair Cable, 4 pairs x AWG 24. Stranded tinned copper conductors, polyolefine insulated singles with bonded pairs, PVC jacket. Colour code: see DataTwist® colour code table onpage 14.

Applicable industry standards: TIA/EIA 568-B2 , ISO/ IEC 11801

Flame test: UL CM UL 1581 Vertical Tray, CSA FT1

Belden 1752A DataTwist ® 350 Bonded pairs Patch Cat. 5E

* values at 310 MHz

7 Table of Contents

Page 9: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

UTP Category 6

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 70Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 1.01

Nominal overall diameter (mm): 6.2Impedance (Ohm): 1 – 100 MHz: 100 ± 15 %

100 – 250 MHz: 100 ± 22 %Energy of flame (kJ/m):

SingleE 490ENH 478

Belden 7965ENH Halogen-free version Product description

Unshielded Twisted Pair Cable, 4 pairs x AWG 23. Solid bare copper conductors, polyolefine insulation, spline. Colour code: see DataTwist® colour code table on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801, TIA/EIA 568-B2

max. (Cat. 6)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.11.7757672746570

73.274

70.272

20.033

3.83.5667363715364

62.470

59.468

23.036

6.05.6606657644557

54.360

51.358

25.044

7.67.1576454624151

49.657

46.655

25.042

8.58.0566353613949

47.355

44.353

25.040

9.69.0546151593747

44.852

41.850

24.337

10.710.1535650543545

42.146

39.144

23.638

15.514.4485545532939

32.941

29.939

21.536

19.918.6455242502535

25.433

22.431

20.131

25.323.6424939472131

17.125

14.123

18.827

1 4 10 16 20 25 31.25 62.5 100 15529.127.0414838461929

11.6218.619

18.025

20033.030.73945364317276.3143.312

17.324

250

Standard lengths (put-ups): Standard weight:1640 ft. 500 m 21.5 kg3280 ft. 1000 m 43.0 kg

Belden 7965E Cat. 6

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 70Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 1.05

Nominal overall diameter (mm): 6.5Impedance (Ohm): 1 – 100 MHz: 100 ± 15 %

100 – 250 MHz: 100 ± 22 %Energy of flame (kJ/m):

SingleE 555ENH 535

Belden 7812ENH Halogen-free version Product description

Unshielded Twisted Pair Cable, 4 bonded pairs x AWG 23. Solid bare copper conductors, polyolefine insulation, spline. Colour code: see DataTwist® colour code table on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801, TIA/EIA 568-B2

max. (Cat. 6)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.11.8758072786570

73.278

70.276

20.034

3.83.5667663745364

62.473

59.471

23.034

6.05.7607057684557

54.364

51.362

25.041

7.67.3576754654151

49.660

46.658

25.042

8.58.2566653643949

47.358

44.356

25.044

9.69.3546451623747

44.855

41.853

24.345

10.710.4536350613545

42.153

39.151

23.646

15.515.1485845562939

32.943

29.941

21.545

19.918.1455542532535

25.437

22.435

20.143

25.323.6425139492131

17.127

14.125

18.840

1 4 10 16 20 25 31.25 62.5 100 15529.127.5414938471929

11.6228.620

18.040

20033.030.83945364317276.3143.312

17.336

250

Standard lengths (put-ups): Standard weight:U 1000 ft. U 305 m 13.1 kg

1640 ft. 500 m 21.5 kg3280 ft. 1000 m 43.0 kg

Belden 7812E Bonded pairs Cat. 6

8Table of Contents

Page 10: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Belden Data CablesBelden Data CablesUTP Category 6

Frequency (MHz)Attenuation (dB/100 m)

PS-NEXT (dB)

PS-ELFEXT (dB)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, Gold, Brown, Blue, Red,Green, Yellow, Orange, VioletVelocity of propagation (%): 70Typ. DCR (Ohm/100 m): 7.4Nominal capacitance (pF/ ft.): 15Diameter of insulated conductor (mm): 0.96

Nominal overall diameter (mm): 8.0Impedance (Ohm): 1 – 20 MHz: 100 ± 12 %

20 – 200 MHz: 100 ± 15 %200 – 310 MHz: 100 ± 20 %310 – 350 MHz: 100 ± 22 %

max. (TIA /EIA Cat. 6)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.01.772.386

64.882

70.384

20.029

1

Standard lengths (put-ups): Standard weight:328 ft. 100 m 4.3 kg

A 1000 ft. A 305 m 13.2 kg

3.83.463.376

52.872

59.573

23.031

46.05.557.370

44.866

51.365

25.034

107.67.054.269

40.762

46.762

25.034

168.57.952.868

38.860

44.360

25.035

209.58.851.366

36.857

41.859

24.335

2510.710.049.965

34.955

39.255

23.635

31.2515.414.145.460

28.950

30.046

21.533

62.519.818.542.354

24.845

22.535

21.033

10025.223.339.452

21.040

14.329

21.033

15529.027.837.850

18.8388.822

21.031

20037.136.034.947–––

1118.030

31039.838.534.146–––8

17.030

350

Belden 1872ANH Halogen-free version Product description

Unshielded Twisted Pair Cable, 4 pairs x AWG 23. Solid bare copper conductors, polyolefine insulated singles with bonded pairs, ripcord, PVC jacket. Colour code: see DataTwist® colour code table on page 14.

Applicable industry standards: TIA/EIA 568-B2 , ISO/ IEC 11801

Flame test: UL type CMR, CMG, CM, UL 1666 riser, UL 1581 Vertical Tray, CSA FT4

Belden 1872A MediaTwist ® Bonded pairs Cat. 6

Frequency (MHz)Attenuation (dB/100 m)

PS-NEXT (dB)

PS-ELFEXT (dB)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, Blue, Red, Green,Yellow, Violet, White, BlackVelocity of propagation (%): 70Typ. DCR (Ohm/100 m): 8.2Nominal capacitance (pF/ ft.): 15Diameter of insulated conductor (mm): 0.99

Nominal overall diameter (mm): 8.0Impedance (Ohm): 1 – 20 MHz: 100 ± 12 %

20 – 200 MHz: 100 ± 15 %200 – 250 MHz: 100 ± 20 %250 – 350 MHz: 100 ± 22 %

guaranteed max.typical

guaranteed min.typical

guaranteed min.typical

guaranteed min.typical

guaranteed min.typical

2.01.872.386

64.882

72.384

20.029

1

Standard lengths (put-ups): Standard weight:1000 ft. 305 m 13.2 kg

A 1000 ft. A 305 m 13.2 kg

4.13.663.376

52.772

61.273

23.031

46.55.857.370

44.866

52.865

25.034

108.27.454.369

40.762

48.062

25.034

169.38.452.868

38.760

45.559

25.035

2010.49.451.366

36.857

42.957

24.335

2511.710.749.965

34.955

40.253

23.635

31.2517.015.645.460

28.850

30.444

21.535

62.522.020.842.354

24.845

22.333

21.033

10030.425.739.552

20.940

11.127

21.033

15535.031.337.850

18.7384.820

21.031

20039.637.136.348–––

1518.030

25051.146.234.246–––1

17.030

350

Belden 1875GBNH Halogen-free version Product description

Unshielded Twisted Pair Cable, 4 pairs x AWG 24. Stranded tinned copper conductors, polyolefine insulated singles with bonded pairs, PVC jacket. Colour code: see DataTwist® colour code table onpage 14.

Applicable industry standards: TIA/EIA 568-B2 , ISO/ IEC 11801

Flame test: UL CM UL1581 Vertical Tray, CSA FT4

Belden 1875GB MediaTwist ® Bonded pairs Patch Cat. 6

9 Table of Contents

Page 11: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Standard lengths (put-ups): Standard weight:1000 ft. 305 m 14.2 kg

U 1000 ft. U 305 m 14.2 kgA 1000 ft. A 305 m 14.2 kg

Colour code:Pair no. 1 White/Green & GreenPair no. 2 White/Orange & OrangePair no. 3 White/Blue & BluePair no. 4 White/Brown & Brown

UTP Category 6

Frequency (MHz)Attenuation (dB/100 m)

PS-NEXT (dB)

PS-ELFEXT (dB)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, Blue, WhiteVelocity of propagation (%): 67Max. DCR (Ohm/100 m): 8.2Nominal capacitance (pF/ ft.): 15.5Diameter of insulated conductor (mm): 1.05

Nominal overall diameter (mm): 8.0Impedance (Ohm): 1 – 25 MHz: 100 ± 12 %

25 – 250 MHz: 100 ± 15 %250 – 350 MHz: 100 ± 20 %350 – 600 MHz: 100 ± 22 %

max. (TIA /EIA Cat. 6)guaranteed max.

min.guaranteed min.

min.guaranteed min.

min.guaranteed min.

min.guaranteed min.

2.01.972.380.364.870.870.378.420.020.0

13.83.663.371.352.858.859.567.723.023.0

46.05.757.365.344.850.851.359.625.025.0

107.67.254.262.340.746.746.755.125.025.0

168.58.152.860.838.844.844.352.725.025.0

209.59.151.359.336.842.841.850.224.325.0

2510.710.249.957.934.940.939.247.723.625.0

31.2515.414.745.453.428.934.930.038.721.525.0

62.519.818.942.350.324.830.822.531.420.125.0

10025.223.939.447.521.027.014.323.618.822.8

15529.027.537.845.818.824.88.818.318.021.6

20032.831.236.344.316.822.83.513.117.320.5

25039.837.734.140.213.919.9

–4.516.319.8

35043.040.633.339.312.818.8

–0.615.919.5

40048.946.231.837.810.816.8

––

15.218.4

50054.551.430.636.69.215.2

––

14.717.6

600

Belden 7851NH Halogen-free version Product description

Unshielded Twisted Pair Cable, 4 pairs x AWG 23. Solid bare copper conductors, polyolefine insulated singles with bonded pairs, e-Spline, ripcord, PVC jacket.

Applicable industry standards: TIA/EIA 568-B2

Flame test: UL type CMR, UL1666 riser listed, CSA FT4

Belden 7851A DataTwist ® 600e Bonded pairs Cat. 6

The DataTwist ® 600e cable is a revolutionary UTP cable engineeredspecifically to perform well beyond proposed Category 6 standards.While proposed Category 6 cable is specified only to 250 MHz,DataTwist ® 600e is the only UTP cable in the industry fully char-acterized with guaranteed performance to 600 MHz. So usershave far more headroom to compensate for unforeseen factorsthat can inhibit the performance of a cabling system today... andprotection of their technology investment for the future.

The Cable Preparation Tool is packed with every spool of Belden DataTwist 600e data cable. The Belden Cable Preparation Tool (1797B) now makes it faster and easier than ever to prepare cables for connector termination. This tool is ideal for use with Belden’s Bonded Pair cables, providing special features that help separate twisted pairs. It can also be used to prepare any unbonded pair cablefor installation.

Pair Separation Techniques:Belden’s Cable Preparation Tool features both the new Pick tech-nique and the traditional Blade Slot technique to better facilitate pairuntwisting. The Pick technique utilizes a steel awl that is incorporatedinto the tip of the tool that is surrounded on both sides with guards

to assist in pair alignment during thepair separation step. The Pick

technique allows for a simple“pick-n-pull” motion to

easily separate the con-ductors of a twistedpair cable. The BladeSlot Technique pro-vides the technicianan alternate methodfor separating theconductors quicklyand easily. SeeTB177 for detailed

instructions for eithertechnique.

10Table of Contents

Page 12: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Belden Data CablesBelden Data Cables(S)FTP Category 5E

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 94Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 1.05

Nominal overall diameter (mm): 6.0Impedance (Ohm): 100 Ohm ± 15 %Energy of flame (kJ/m):

Single TwinE 474 949ENH 464 929

Belden 1633ENH Halogen-free version

Belden 1668E Twin version of 1633E

Belden 1668ENH Twin version of 1633ENH

Product description

Shielded Twisted Pair Cable, 4 pairs x AWG 24. Solid bare copper conductors, polyolefine insulation,overall foil shield, tinned copper drain wire. Colour code: see DataTwist® colour code table on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801

max. (Cat. 5E)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.12.0657062686173

63.268

60.266

20.033

4.03.8566253604961

52.358

49.356

23.034

5.75.5525849564355

46.153

43.151

24.540

6.36.0505747554153

44.051

41.049

25.042

8.07.6475444523747

39.246

36.244

25.042

9.08.5465243503545

36.844

33.842

25.041

10.19.5445041483343

34.241

31.239

24.338

11.410.8434940473141

31.538

28.536

23.635

16.515.0384535432537

21.830

18.828

21.532

21.319.3354332412133

14.024

11.022

20.129

1 4 8 10 16 20 25 31.25 62.5 100

Standard lengths (put-ups): Standard weight:1000 ft. 305 m 13.0 kg1640 ft. 500 m 21.5 kg3280 ft. 1000 m 43.0 kg

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 66Max. DCR (Ohm/km): 82Nominal capacitance (pF/m): 14Diameter of insulated conductor (mm): 1.06

Nominal overall diameter (mm): 6.7Impedance (Ohm): 100 Ohm ± 15 %

Standard lengths (put-ups): Standard weight:U 1000 ft. U 305 m 14.3 kg

1000 ft. 305 m 16.2 kg3280 ft. 1000 m 53.2 kg

Belden 1633E Cat. 5E

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

RL (dB)

Belden 1730ANH Halogen-free version Product description

Shielded Twisted Pair Cable, 4 bonded pairs x AWG 24. Solid bare copper conductors, polyolefine insulation, lateral foil shield, spiral tinned copper drain wire, Nylon ripcord, PVC jacket. Colour code:see DataTwist® colour code table on page 14.

Applicable industry standards: ISO/ IEC 11801

max. (Cat. 5E)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

4.01.960706173

56.068

20.023

1

Belden 1730A Bonded pairs Cat. 5E

4.03.756614961

52.357

23.023

45.75.252564355

46.151

24.523

86.35.850554153

44.049

25.023

108.07.447523747

39.245

25.023

169.08.346503545

36.842

25.023

2011.410.443483141

31.538

23.621

31.2516.514.738432537

21.828

21.518

62.521.319.535402133

14.021

20.116

100

11 Table of Contents

Page 13: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

(S)FTP Category 5E

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 94Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 1.05

Nominal overall diameter (mm): 6.3Impedance (Ohm): 100 Ohm ± 15 %Energy of flame (kJ/m):

Single TwinE 525 1050ENH 505 1010

Belden 1633ENH+ Halogen-free version

Belden 1668E+ Twin version of 1633E+

Belden 1668ENH+ Twin version of 1633ENH+

Product description

Shielded Twisted Pair Cable. 4 pairs x AWG 24. Solid bare copper conductors, polyolefine insulation,overall foil shield, tinned copper drain wire and tinned copper braid. Colour code: see DataTwist®

colour code table on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801

max. (Cat. 5E)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.12.0657062686173

63.268

60.266

20.033

4.03.8566253604961

52.358

49.356

23.034

5.75.5525849564355

46.153

43.151

24.540

6.36.0505747554153

44.051

41.049

25.042

8.07.6475444523747

39.246

36.244

25.042

9.08.5465243503545

36.844

33.842

25.041

10.19.5445041483343

34.241

31.239

24.338

11.410.8434940473141

31.538

28.536

23.635

16.515.0384535432537

21.830

18.828

21.532

21.319.3354332412133

14.024

11.022

20.129

1 4 8 10 16 20 25 31.25 62.5 100

Standard lengths (put-ups): Standard weight:1000 ft. 305 m 14.6 kg1640 ft. 500 m 24.0 kg3280 ft. 1000 m 48.0 kg

Belden 1633E+ Braided Cat. 5E

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, Blue, Red, Green, YellowTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 135Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 0.95

Nominal overall diameter (mm): 5.2Impedance (Ohm): 100 Ohm ± 15 %Energy of flame (kJ/m):

SingleE 370ENH 355

Belden 1868ENH Halogen-free version Product description

Shielded Twisted Pair Cable, 4 pairs x AWG 26. Stranded bare copper conductors, polyolefine insulation, overall foil shield, tinned copper drain. Colour code: see DataTwist® colour code tableon page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801

max. (Cat. 5E)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

3.22.5656962676177

62.167

59.165

20.032

6.05.0566053584965

50.355

47.353

23.033

8.57.0525649544359

43.349

40.347

24.541

9.57.9505447524157

40.846

37.844

25.042

12.19.9475144493753

35.241

32.239

25.041

13.611.1465043483551

32.239

29.237

25.040

15.212.5444841463349

29.136

26.134

24.337

17.114.0434740453147

25.833

22.831

23.633

24.820.5384235402540

13.622

10.620

21.530

32.026.33539323721363.3130.311

20.127

1 4 8 10 16 20 25 31.25 62.5 100

Standard lengths (put-ups): Standard weight:1000 ft. 305 m 8.3 kg1640 ft. 500 m 13.5 kg3280 ft. 1000 m 27.0 kg

Belden 1868E Patch Cat. 5E

12Table of Contents

Page 14: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Belden Data CablesBelden Data Cables(S)FTP Category 6

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 91Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 1.17

Nominal overall diameter (mm): 7.2Impedance (Ohm): 1 – 100 MHz: 100 ± 15 %

100 – 250 MHz: 100 ± 22 %Energy of flame (kJ/m):

SingleE 560ENH 540

Belden 7860ENH Halogen-free version Product description

Shielded Twisted Pair Cable, 4 bonded pairs x AWG 23. Solid bare copper conductors, polyolefine insulation, overall foil shield and tinned copper drain wire. Colour code: see DataTwist® colour codetable on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801

max. (Cat. 6)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.11.9758072786570

73.278

70.276

20.030

3.83.5667663745364

62.473

59.471

23.035

6.05.5607057684557

54.365

51.363

25.040

7.66.9576754654151

49.660

46.658

25.044

8.57.6566653643949

47.358

44.356

25.044

9.68.6546451623747

44.855

41.853

24.344

10.79.7536350613545

42.153

39.151

23.644

15.513.8485845562939

32.944

29.942

21.534

19.917.7455542532535

25.437

22.435

20.130

25.322.4425139492131

17.129

14.127

18.825

1 4 10 16 20 25 31.25 62.5 100 15529.125.1414938471929

11.6248.622

18.024

20033.028.23945364317276.3173.315

17.324

250

Standard lengths (put-ups): Standard weight:1640 ft. 500 m 24.9 kg3280 ft. 1000 m 50.0 kg

Belden 7860E Bonded pairs Cat. 6

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: Grey, BlueTypical velocity of propagation (%): 70Max. DCR (Ohm/km): 91Nominal capacitance (pF/m): 50Diameter of insulated conductor (mm): 1.17

Nominal overall diameter (mm): 7.5Impedance (Ohm): 1 – 100 MHz: 100 ± 15 %

100 – 250 MHz: 100 ± 22 %Energy of flame (kJ/m):

SingleE 560ENH 540

Belden 7860ENH+ Halogen-free version Product description

Shielded Twisted Pair Cable, 4 bonded pairs x AWG 23. Solid bare copper conductors, polyolefine insulation, overall foil shield and tinned copper drain wire and tinned copper braid. Colour code:see DataTwist® colour code table on page 14.

Applicable industry standards: EN 50173, ISO/ IEC 11801

max. (Cat. 6)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.11.9758072786570

73.278

70.276

20.030

3.83.5667663745364

62.473

59.471

23.035

6.05.5607057684557

54.365

51.363

25.040

7.66.9576754654151

49.660

46.658

25.044

8.57.6566653643949

47.358

44.356

25.044

9.68.6546451623747

44.855

41.853

24.344

10.79.7536350613545

42.153

39.151

23.644

15.513.8485845562939

32.944

29.942

21.534

19.917.7455542532535

25.437

22.435

20.130

25.322.4425139492131

17.129

14.127

18.825

1 4 10 16 20 25 31.25 62.5 100 15529.125.1414938471929

11.6248.622

18.024

20033.028.23945364317276.3173.315

17.324

250

Standard lengths (put-ups): Standard weight:1640 ft. 500 m 28.5 kg3280 ft. 1000 m 56.9 kg

Belden 7860E+ Bonded pairs Braided Cat. 6

13 Table of Contents

Page 15: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

Page6666778899101011111112121213131414

ISTP Category 7

Frequency (MHz)Attenuation (dB/100 m)

NEXT (dB)

PS-NEXT (dB)

PS-ELFEXT (dB)

ACR (dB/100 m)

PS-ACR (dB/100 m)

RL (dB)

Number of pairs: 4Standard colour: GreyVelocity of propagation (%): 75Max. DCR (Ohm/km): 75Nominal capacitance (pF/m): 48Diameter of insulated conductor (mm): 1.45

Nominal overall diameter (mm): 8.0Impedance (Ohm): 1 – 100 MHz: 100 ± 15 %

100 – 250 MHz: 100 ± 22 %250 – 600 MHz: 100 ± 25 %

Energy of flame (kJ/m):Single Twin

ENH 500 1000

Belden 1887ENH Twin version of 1885ENH Product description

Shielded Twisted Pair Cable, 4 pairs x AWG 23. Solid bare copper, foam skin polyolefin insulated,pairs individually shielded with Aluminum/Polyester foil, overall tinned copper braid, ripcord, flameretardant NH jacket. Colour code: see DataTwist® colour code table below.

Applicable industry standards: EN 50173, ISO/ IEC 11801

max. (Cat. 7)typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typicalmin.

typical

2.01.978

10075987595

76.098

73.096

20.026

3.73.578

10075987595

74.397

71.395

23.030

5.95.47810075987195

72.195

69.193

25.035

7.46.97810075986790

70.693

67.691

25.035

8.37.67810075986587

69.792

66.790

25.035

10.49.67810075986184

67.690

64.688

23.634

14.913.67510072985580

60.686

57.684

21.532

19.017.4729569935176

53.478

50.476

20.131

24.021.7709567934772

45.673

42.671

18.829

27.524.7689565934570

40.470

37.468

18.029

1 4 10 16 20 31.2 62.5 100 155 20034.230.5659062884165

31.160

28.158

16.828

30050.144.6619058883550

10.6457.643

14.728

66.956.6579054883156–

33.4–

3113.120

600 1000

Standard lengths (put-ups): Standard weight:1640 ft. 500 m 30.0 kg3280 ft. 1000 m 60.0 kg

Belden 1885ENH Halogen-free Cat. 7

1583E, 1583ENH1667E, 1667ENH1700A, 1700ANH1702E, 1702ENH1592A*1752A*7965E, 7965ENH7812E, 7812ENH1872A, 1872ANH1875GB*7851A, 7851NH1797B1633E, 1633ENH1668E, 1668ENH1730A, 1730ANH1633E+, 1633ENH+1668E+, 1668ENH+1868E, 1868ENH7860E, 7860ENH7860E+, 7860ENH+1885ENH1887ENH

Belden part numberU-305 m, 305 m, 500 m, 1000 m305 m, 500 m, 1000 mU-305 m, 305 m, 500 m, 1000 m305 m, 500 m, 1000 mU-305 m, 305 m U-305 m, 305 m 500 m, 1000 mU-305 m, 500 m, 1000 m100 m, A-305 mA-305 m, 305 mA-305 m, U-305 m, 305 m

305 m, 500 m, 1000 m305 m, 500 m, 1000 mU-305 m, 305 m, 1000 m305 m, 500 m, 1000 m305 m, 500 m, 1000 m305 m, 500 m, 1000 m500 m, 1000 m500 m, 1000 m500 m, 1000 m500 m, 1000 m

Standard lengths (put-ups)Grey (RAL 7032), Blue (RAL 5015)Grey (RAL 7032)Grey (RAL 7032), Blue (RAL 5015)Grey (RAL 7032)Grey, Blue (RAL 5015), Red, Green, Yellow (RAL1021), Orange, Violet, White, BlackGrey, Blue (RAL 5015), Red, Green, Yellow (RAL1021), Orange, Violet, White, BlackGrey (RAL 7032), Blue (RAL 5015)Grey (RAL 7032), Blue (RAL 5015)Grey, Gold, Brown, Blue (RAL 5015), Red, Green, Yellow (RAL1021), Orange, VioletGrey, Blue (RAL 5015), Red, Green, Yellow (RAL1021), Violet, White, BlackGrey, Blue (RAL 5015), WhiteCable preparation tool (White)Grey (RAL 7032), Blue (RAL 5015)Grey (RAL 7032)Grey, Blue (RAL 5015)Grey (RAL 7032), Blue (RAL 5015)Grey (RAL 7032)Grey, Blue (RAL 5015), Red, Green, Yellow (RAL1021)Grey (RAL 7032), Blue (RAL 5015)Grey (RAL 7032), Blue (RAL 5015)Grey (RAL 7032)Grey (RAL 7032)

Colour

DataTwist ® colour code table:Pair no. 1 White/Blue & BluePair no. 2 White/Orange & OrangePair no. 3 White/Green & GreenPair no. 4 White/Brown & Brown

Notes:● Special put-ups available upon request.● Packaging on non-returnable reels, unreel

box (U-305 m) or reel in box (A-305 m).

Ordering Information & DataTwist ® Colour Code Table

* Halogen-free version available upon request.

14Table of Contents

Page 16: Data Cables - PROTEL - Profesyonel iletişim … Finder Unshielded cables UTP Category 5E UTP Category 6 Shielded cables (S)FTP Category 5E (S)FTP Category 6 ISTP Category 7 Ordering

©Copyright 2003, Belden Inc. 09.03. 3000 Reprinting and reproduction, in whole or in part, prohibited.

All sales of Belden products are subject to Belden’s terms and conditions of sale. All printing errors are subject tocorrection. Technical specifications are subject to change without notice.The author reserves the right not to be responsible for the topicality, correctness, completeness or quality of theinformation provided. Liability claims regarding damage caused by the use of any information provided, includingany kind of information which is incomplete or incorrect, will therefore be rejected.

RussiaBelden Office MoscowUL. Gubkina, 8 117333 Moscow RussiaPhone/Fax: +7 095 938 2754

SwedenBelden Wire & Cable B.V.Stadshusplatsen 2 14930 NynäshamnSwedenPhone: +46 8 52010275Fax: +46 8 52010276

United KingdomBelden Communications Division Delaunays Road, BlackleyManchester. M9 8FPUnited KingdomPhone: +44 161 740 9151Fax: +44 161 795 8393E-mail: [email protected]: www.belden-cd.co.uk

FranceBelden Electronics S.A.R.L.Immeuble Le César20, Place Louis Pradel69001 LyonFrancePhone: +33 472 109990Fax: +33 478 298409

HungaryBelden – Dunakabel Kft.Hengermalom Str. 43 1116 BudapestHungaryPhone: +36 1206 1987Fax: +36 1206 1986

ItalyBelden International Inc.Via Paracelso 26Centro Direzionale Colleoni Palazzo Cassiopea Ingr. 320041 Agrate Brianza (MI)ItalyPhone: +39 039 6560911Fax: +39 039 6560929

United StatesBelden Wire & Cable Co.P.O. Box 1980 Richmond, IN 47375United StatesPhone: +1 765 983 5200Fax: +1 765 983 5294

CanadaBelden Canada Inc. 130 Willmott StreetCobourg, OntarioCanada K9A 4M3Phone: +905 372 8713Fax: +905 372 6291

SingaporeBelden International, Inc. 101 Thompson Road, #07-02United SquareSingapore 307591Phone: +01165 251 8211Fax: +01165 251 5010

Belden across the globe

Europe:

The Netherlands(European Headquarters)Belden Wire & Cable B.V.Edisonstraat 95928 PG VenloThe NetherlandsPhone: +31 77 3878555Fax: +31 77 3878448

E-mail:[email protected]:www.belden-europe.com

World-wide:

Africa/Middle EastBelden Wire & CableDubai Internet CityBuilding One, Suite 216P.O. Box 500158DubaiUnited Arab EmiratesPhone: +971 4 391 0490Fax: +971 4 391 8775

AustraliaBelden Australia Pty. Ltd.Olympia StreetTottenham, Victoria 3012AustraliaPhone: +61 3 9224 2800Fax: +61 3 9314 8515