DAT Date Sheet
-
Upload
hamidrahman13 -
Category
Documents
-
view
745 -
download
4
Transcript of DAT Date Sheet
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR 1st Year
DATE SHEET THEORY
FOR DIPLOMA OF ASSOCIATE ENGINEER NEW COURSE ANNUAL EXAMINATION 2011 THEORY PAPERS
Time: Morning = 8:30 AM to 11:30 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
Date, Day &
Time
Auto & Diesel
Technology
Auto & Farm
Technology
Civil Technology
Chemical Technology
Electrical Technology
Mechanical Technology
ElectronicsTechnology
Telecom-munication Technology
Computer Hardware
Technology
Architech-ture
Technology
Bio-MedicalTechnology
Refrigeration & Air Cond:
Technology
11.05.2011
Wednesday
Morning
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak. Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak. Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak.
Study
GEN-111Islamyat / Pak.
Study
12.05.2011
ThursdayEvening
PHY-122Applied Physics
PHY-122Applied Physics
PHY-122Applied Physics
PHY-113Applied Physics
ET-115Principles of
Electrical Engr:
(Paper-A)
PHY-122Applied Physics
PHY-122Applied Physics
PHY-122Applied Physics
PHY-132Applied Physics
PHY-122Applied Physics
PHY-122Applied Physics
PHY-122Applied Physics
14.05.2011
SaturdayMorning
MATH-113Applied
Mathematics-I(Paper-A)
MATH-113Applied
Mathematics-I(Paper-A)
MATH-113Applied
Mathematics-I(Paper-A)
MATH-113Applied
Mathematics-I(Paper-A)
MATH-123Applied
Mathematics-I(Paper-A)
MATH-113Applied
Mathematics-I(Paper-A)
MATH-123Applied
Mathematics-I
(Paper-A)
MATH-123Applied
Mathematics-I(Paper-A)
MATH-123Applied
Mathematics-I(Paper-A)
MATH-113Applied
Mathematics-I(Paper-A)
MATH-123Applied
Mathematics-I(Paper-A)
MATH-113Applied
Mathematics-I(Paper-A)
17.05.2011
TuesdayMorning
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
GEN-112English
18.05.2011
Wednesday
Evening
MATH-113Applied
Mathematics-I (Paper – B)
MATH-113Applied
Mathematics-I (Paper – B)
MATH-113Applied
Mathematics-I (Paper – B)
MATH-113Applied
Mathematics-I (Paper – B)
MATH-123Applied
Mathematics-I (Paper – B)
MATH-113Applied
Mathematics-I (Paper – B)
MATH-123Applied
Mathematics-I (Paper – B)
MATH-123Applied
Mathematics-I (Paper – B)
MATH-123Applied
Mathematics-I (Paper – B)
MATH-113Applied
Mathematics-I (Paper – B)
MATH-123Applied
Mathematics-I (Paper – B)
MATH-113Applied
Mathematics-I (Paper – B)
20.05.2011
FridayMorning
MT-164Workshop Practice – I
MT-164Workshop Practice – I
CT-114Surveying - I
CHT-153Basic
Chemical Engg:- I
ET-146 Workshop Practice – I
MT-116Workshop Practice – I
ELT-114Electrical Essentials & Network (Paper-A)
TC-114Electrical Essentials & Network (Paper-A)
COMP-114Electrical Essentials & Network (Paper-A)
AR-154Surveying and
Levelling
ELT/BM-114Electrical Essentials & Network (Paper-A)
ET-113Applied
Electricity
23.05.2011
MondayMorning
AD-123I.C. Engines
AD-123I.C. Engines
CT-133Civil Drafting -----
ET-115Principles of
Electrical Engr:
(Paper-B)
MT-131Safety
Practice and Procedures
ELT-114Electrical Essentials & Network (Paper-B)
TC-114 Electrical Essentials & Network (Paper-B)
COMP-114 Electrical Essentials & Network (Paper-B)
AR-112Building
Material and Fabrication
ELT/BM-114 Electrical Essentials & Network (Paper-B)
RACT-113Principal of
Refrigeration
(Continued on Page 2)
1st Year New Course Theory Papers ( ANNUAL 2011 )
Date, Day &
Time
Auto & Diesel
Technology
Auto & Farm
Technology
Civil Technology
Chemical Technology
Electrical Technology
Mechanical Technology
ElectronicsTechnology
Telecom-munication Technology
Computer Hardware
Technology
Architech-ture
Technology
Bio-MedicalTechnology
Refrigeration & Air Cond:
Technology
24.05.2011
TuesdayEvening
MT-153Engineering
Drawing
MT-153Engineering
Drawing
CH-112Applied
Chemistry
CHT-164General
Chemistry
CH-132Applied
Chemistry
CH-112Applied
Chemistry----- -----
CH-132Applied
Chemistry
AR-132Basic
Computer in Architecture
CH-112Applied
Chemistry
CH-112Applied
Chemistry
26.05.2011
ThursdayMorning
AD-113Automotive Electric and Electronics
AD-113Automotive Electric and Electronics
CT-123Construction
I
MT-143Drawing and
CAD - I-----
MT-143Basic
Engineering and CAD - I
----- ----- -----
AR-123Architectural Drawing and
Drafting
BM-112Fundamental of Biomedical
Equipment and interfaces
-----
27.05.2011
FridayEvening
*COMP-122Computer
Applications
*COMP-122Computer
Applications
-----*COMP-122
Computer Applications
*COMP-122Computer
Applications
*COMP-122Computer
Applications
----- -----
*COMP-123Electronic
Devices and Circuit – I
(Paper – A)
-----*COMP-122
Computer Applications
*COMP-122Computer
Applications
30.05.2011
MondayMorning
----- ----- ----- ----- ----- ----- ----- -----
*COMP-123Electronic
Devices and Circuit – I
(Paper – B)
----- ----- -----
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.Morning : 09.30 A.M to 12.30 P.M
New Time: - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR 2nd Year
DATE SHEET THEORY
FOR DIPLOMA OF ASSOCIATE ENGINEER ANNUAL EXAMINATION 2011 NEW COURSE THEORY PAPERS
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
Date, Day &
Time
Auto & Diesel
Technology
Auto & Farm
Technology
Civil Technology
Chemical Technology
Electrical Technology
Mechanical Technology
ElectronicsTechnology
Telecom-munication Technology
Computer Hardware
Technology
Architech-ture
Technology
Bio-MedicalTechnology
Refrigeration & Air Cond:
Technology
11.05.2011
Wednesday
Evening
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
GEN-211Islamiyat / Pak. Study
13.05.2011
FridayMorning
PHY-212Applied
Mechanics
PHY-212Applied
Mechanics
CT-262Quantity
Surveying – I
CHT-244Organic
Chemistry
PHY-222Applied Physics
PHY-212Applied
Mechanics
ELT-222Motor and Generators
TC-262Power Plant
COMP-214Computer
Organization & Basic
Programming
AR-212Environmental
Studies
BM-214Solid State Electronics
PHY-212Applied
Mechanics
16.05.2011
MondayMorning
CH-213Applied
Chemistry
CH-213Applied
Chemistry
CT-212Public Health Engineering
I
CHT-254Industrial Chemical Process – I (Paper - A)
ET-213D.C. Machines and Batteries
ET-202Applied
Electricity & Electronics
CH-213Applied
Chemistry
CH-222Applied
Chemistry
COMP-223Electronic
Devices and Circuits – II
AR-214Structural Mechanics RCC Design (Paper - A)
BM-222Digital
Electronics
RACT-214Principal of Air-Cond:
(Paper - A)
17.05.2011
TuesdayEvening
AD-212Applied
Thermodyn:
AD-212Applied
Thermodyn:
CT-243Civil Drafting II
CHT-263Quantitative
Analysis
ET-223Electrical Inst:
and Measurement
MT-242Metallurgy
ELT-264Amplifiers & Radio
Receivers
TC-222Digital Circuits
and Microprocesso
r
COMP-232Motor and
Power Supplies
AR-224Architecture Design and Drawing - I
BM-223X-Ray & Film Processing Equipment
RACT-243Advance
Refrigeration (Paper - A)
19.05.2011
ThursdayMorning
AD-223Suspension
Steering and Brakes
AD-223Suspension
Steering and Brakes
CT-224Surveying – II
MGM-211Business
Communic:
ET-233Utilization of
Electrical Energy
MGM-211Business
Communic:
MGM-211Business
Communic:
MGM-211Business
Communic:
COMP-243Digital
Electronics & Microprocesso
r
AR-233Auto CAD – I
MGM-211Business
Communic:
RACT-223Applied
Thermodyn: & Low Pressure
Boiler
20.05.2011
FridayEvening
AD-243Problem in I.C.
Engine
AF-213Farm
MachineryII
CT-233Construction II
CHT-271Safety
Practice and Procedure
ET-242Installation
Planning and Estimating
MT-223Engineering Drawing – II
ELT-233Measuring
Instruments
TC-233Measuring
Instruments
COMP-253Measuring
Instruments
AR-262History of
Architecture
ELT-233Measuring
Instruments
RACT-214Principal of Air-Cond:
(Paper - B)
23.05.2011
MondayEvening
MATH-212Applied
Mathematics II
MATH-212Applied
Mathematics II
MATH-212Applied
Mathematics II
MATH-223Applied
Mathematics II(Paper – A)
MATH-233Applied
Mathematics II(Paper – A)
MATH-212Applied
Mathematics II
MATH-233Applied
Mathematics II(Paper – A)
MATH-233Applied
Mathematics II(Paper – A)
MATH-233Applied
Mathematics II(Paper – A)
MATH-212Applied
Mathematics II
MATH-233Applied
Mathematics II(Paper – A)
MATH-223Applied
Mathematics II(Paper – A)
(Continued on Page 4)
2nd Year New Course Theory Papers( ANNUAL EXAMINATION 2011 )
Date, Day &
Time
Auto & Diesel
Technology
Auto & Farm
Technology
Civil Technology
Chemical Technology
Electrical Technology
Mechanical Technology
ElectronicsTechnology
Telecom-munication Technology
Computer Hardware
Technology
Architech-ture
Technology
Bio-MedicalTechnology
Refrigeration & Air Cond:
Technology
25.05.2011
Wednesday
Morning
AD-234Workshop Practice
II
AD-234Workshop Practice
II
CT-253Mechanics of
Structure
CHT-283Physical
Chemistry
ET-263Basic
Electronics
MT-212Metrology
ELT-252Communic:
SystemI
TC-242Radio
Communic: System
I
COMP-262Control &
Automation
AR-253Building
Construction I
BM-242Operational
Amplifier and Application
RACT-243Advance
Refrigeration (Paper B)
26.05.2011
ThursdayEvening
MT-252Metrology
AF-222Crop
Husbandry-----
MATH-223Applied
Mathematic II (Paper B)
MATH-233Applied
Mathematic II (Paper B)
MT-236Workshop Practice
II
MATH-233Applied
Mathematic II (Paper B)
MATH-233Applied
Mathematic II (Paper B)
MATH-233Applied
Mathematic II (Paper B)
AR-214Structural Mechanics and RCC
Design (Paper B)
MATH-233Applied
Mathematic II (Paper B)
MATH-223Applied
Mathematic II (Paper B)
27.05.2011
FridayEvening
----- -----*COMP-122
Computer
Application ----- ----- -----
*ELT-214Elect: Devices
& Circuits (Paper A)
*TC-214Telecom Elect:
& Circuits (Paper A)
----- ----- ----- -----
30.05.2011
MondayMorning
----- ----- -----CHT-293Chemical
Engineering I----- -----
*ELT-214Elect: Devices
& Circuits (Paper B)
*TC-214Telec: Electr:
& Circuits(Paper B)
----- -----
BM-233Electrical
Machine & Industrial
Electronics
RACT-233Engineering & Architecture
Drawing
31.05.2011
TuesdayMorning
MGM-232Industrial
Management & Economics
MGM-232Industrial
Management & Economics
-----
MGM-221Business Manag: &
Industrial Eco:
MGM-221Business Manag: &
Industrial Eco:
MGM-221Business Manag: & Industrial
Eco:
MGM-221Business Manag: &
Industrial Eco:
MGM-221Business Manag: &
Industrial Eco:
----- -----
MGM-221Business Manag: &
Industrial Eco:
MGM-232Industrial
Management & Economics
01.06.2011
Wednesday
Morning
----- ----- -----
CHT-254Industrial Chemical Process – I (Paper B)
----- -----ELT-243Pulse and
Digital Circuit
TC-253Telephone Exchange
----- -----
BM-212Patient Safety & Ultrasound,
Radiation Physics
RACT-253Workshop Practice
II
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.Morning : 09.00 A.M to 12.00 P.M
New Time: - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR 3rd Year
DATE SHEET THEORY
FOR DIPLOMA OF ASSOCIATE ENGINEER NEW COURSE ANNUAL EXAMINATION 2011 THEORY PAPERS
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
Date, Day &
Time
Auto & Diesel
Technology
Auto & Farm
Technology
Civil Technology
Chemical Technology
Electrical Technology
Mechanical Technology
ElectronicsTechnology
Telecom-munication Technology
Computer Hardware
Technology
Architech-ture
Technology
Bio-MedicalTechnology
Refrigeration & Air Cond:
Technology
12.05.2011
ThursdayMorning
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
GEN-311Islamyat / Pak.
Study
13.05.2011
FridayEvening
AD-313Computer
Application in CAD and
Automation
AD-313Computer
App: in CAD & Automation
CT-353Railways,
Docks, Harbours and
Bridges
CHT-324Industrial Chemical
Process – II (Paper – A)
ET-364Digital and Industrial
Electronics (Paper – A)
MT-312Hydraulics &
Hydraulic Machines
ELT-312Communic: System – II
TC-312Radio
Communic: System – II
COMP-344Operating
System and C Language
AR-324Arch: Design & Drawing - II
BM-312Opto Electr:, Fiber Optics and Laser
RACT-314Air Condition
System Design
(Paper – A)
16.05.2011
MondayEvening
AD-323Fuel Injection & Carburetion
AD-323Fuel Injection & Carburetion
CT-344Hydraulics & Irrigation (Paper A)
CHT-335Chemical
Engineering II
(Paper A)
ET-343Telecommuni-
cation
MT-323Application
Thermodyn: & Energy Covn:
ELT-333Industrial
Electronics
TC-332Antenna &
Wave propagation
COMP-352Computer Hardware
AR-312Building
Economics & Management / Safety Pract:
BM-342Bio Chemistry & Clinic Lab Equipment
RACT-322Water and Air Distribution
18.05.2011
Wednesday
Morning
AD-333Automotive
Transmission
AD-333Automotive
Transmission
CT-333Public Health Engineering
II
CHT-314Instrumental Methods of
Analysis
ET-353Repair and
Maintenance of Electrical Equipment
MT-343Machine Design
ELT-326TV Circuits
and Systems (Paper A)
TC-325TV Circuits
and Systems (Paper A)
COMP-314Computer
Maintenance and Servicing
-----
BM-324Fundament: of Micro-Proc: &
Interfacing Techniques
RACT-334Control and Instrument (Paper A)
19.05.2011
ThursdayEvening
AD-342Motor Vehicle
Inspection
AD-342Motor Vehicle
Inspection
CT-373Soil Mechanics Highway and
Airports
CHT-372Industrial
Stoichiometry
ET-316AC Machines
(Paper A)
MT-332Ind: Engg: Ind:
Planning & Pord: Met:
ELT-342Antenna and Transmission
Lines
TC-342Mircroproc: App: and Interfaces
COMP-323Computer
Peripherals & interfacing
AR-353Building
Construction II
BM-311Med: Termin:
& Human Anatomy & Physiology
RACT-363Heat Transfer
& Ref: Circulation (Paper A)
21.05.2011
SaturdayMorning
AD-353Auto Body
Building and
Finishing
AF-312Soil and
Fertilizers
CT-364Concrete
Tech: & RCC Design
(Paper A)
CHT-342Process Inst: and Control
ET-322Power Plant and Energy
Conserv:
MT-353Tool Design and Making
ELT-351Microwave and Radar
TC-363Digital
Communic:
COMP-332Data Commu: & Computer
Network
AR-373Estimation
and spici: by laws
BM-322Steriliz:, Autocl: &
Med Gases, Vacuum Sys
RACT-342Industrial Reg:
and Air Cond:
24.05.2011
TuesdayMorning
AD-362Motor Vehicle
Driving
AF-323Farm
MachineryII
CT-364 Concrete
Tech: and RCC Design (Paper
B)
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
MGM-311Busn: Mang: Ind: Eco:/Ind: Man:Hum:Rel:
(Continued on Page 6)
3rd Year New Course Theory Papers( ANNUAL EXAMINATION 2011 )
Date, Day &
Time
Auto & Diesel
Technology
Auto & Farm
Technology
Civil Technology
Chemical Technology
Electrical Technology
Mechanical Technology
ElectronicsTechnology
Telecom-munication Technology
Computer Hardware
Technology
Architech-ture
Technology
Bio-MedicalTechnology
Refrigeration & Air Cond:
Technology
25.05.2011
Wednesday
Evening
AD-374Workshop Practice
II
AF-344Workshop Practice
II
CT-312Project
Management
CHT-362Energy
Conser: / Pollution
ET-335Trans: Dist: & Protect of Ele:
Power Sys: (Paper A)
MT-374Workshop Practice
II
ELT-363Mircroproc:
and Microcomp:
TC-382Fiber Optics and Satellite Communic:
COMP-362Micro-
Processor Programming
-----
BM-361Bio Med: Equ: maint: manuf: & computer
app: in Engg:
RACT-334Control and Instrument (Paper B)
27.05.2011
FridayMorning
MGM-321Business
Communic:
MGM-321Business
Communic:
CT-344Hydraulics and
Irrigation (Paper B)
CHT-324Industrial Chemical
Process – II (Paper B)
MGM-321Business
Communic:
MT-362Materials Testing &
Heat Treatment
ELT-326TV Circuits and System (Paper B)
TC-325TV Circuits and System (Paper B)
MGM-321Business
Communic:-----
BM-334ECG and Ultra-
Sound Equipment
MGM-321Business
Communic:
28.05.2011
SaturdayMorning
AD-392Metallurgy
& Heat Treatment
AF-332Earth Moving
Machinery-----
CHT-335Chemical Engg: - II (Paper B)
ET-364Digital & Industrial
Electronics (Paper B)
MT-382Computer Integrated Manuf: CIM
----- ----- ----- -----
BM-354Therapeutic Bio Medical Equipment
RACT-363Heat Transfer
and Ref: Circulation (Paper B)
30.05.2011
MondayEvening
----- ----- ----- -----ET-316
A.C. Machine (Paper B)
----- ----- ----- ----- ----- -----
RACT-314Air-Condition Sys: Design (Paper B)
31.05.2011
Tuesday Evening
----- ----- ----- -----
ET-335Trans: Dist: & Protect of Ele:
Power Sys: (Paper B)
----- ----- ----- ----- ----- ----- -----
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.Morning : 09.00 A.M to 12.00 P.M
New Time: - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2010 NEW COURSE
Time: Morning = 08:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
( THEORY ) IST YEAR
DATE, DAY & TIMECOMPUTER INFORMATION TECHNOLOGY
SUBJECTS
11.05.2011 Wednesday (Morning)
Gen-111Islamiat / Pak. Studies & Ethics
12.05.2011 Thursday (Evening)
Phy-112Applied Physics
14.05.2011 Saturday (Morning)
Math-113Applied Mathematics-I-Paper-A
17.05.2011 Tuesday (Morning)
Eng-112English
18.05.2011 Wednesday (Evening)
Math-113Applied Mathematics-I-Paper-B
20.05.2011 Friday (Morning)
CIT-123Introduction to Comp: Programing
23.05.2011 Monday (Morning)
CIT-143Linear Circuit & Basic Electronics
24.05.2011 Tuesday (Evening)
Che-132Applied Chemistry
26.05.2011 Thursday (Morning)
OHSE-101Occupational Health, Safety & Environment
( PRACTICAL )Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 02:00 PM to 04:00
PM
DATE, DAY & TIMECOMPUTER INFORMATION TECHNOLOGY
SUBJECTS
27.06.2011 MondayCIT-131
General Engineering Workshop
28.06.2011 TuesdayCIT-143
Linear Circuit & Basic Electronics29.06.2011 Wednesday
Che-132Applied Chemistry
30.06.2011 Thursday Phy-112
Applied Physics
01.07.2011 Friday CIT-112
Computer Application Software02.07.2011 Saturday
CIT-123Introduction to Computer Programing
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 09.00 A.M to 12.00 P.MNew Time (Theory): - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
Morning : 10.00 A.M to 04.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEET FOR DIPLOMA IN DRESS DESIGNING AND MAKING ( D.D.M )
ANNUAL EXAMINATION 2011 THEORY PAPERS ( NEW & OLD COURSE )
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM(Friday Evening 2:30 PM to 5:30 PM)
IST YEAR
DATE, DAY & TIME ( NEW COURSE ) ( OLD COURSE )
11.05.2011Wednesday (Morning)
GEN-111Islamiyat / Pak. Study
GEN-111Islamiyat / Pak. Study
12.05.2011Thursday (Evening)
DDM-116Machine / Hand
Embroidery
DDM-116Machine / Hand Embroidery
14.05.2011Saturday (Morning)
Math-153Mathematics
Math-153Applied Mathematics
17.05.2011Tuesday (Morning)
GEN-112English
GEN-112English
18.05.2011Wednesday (Evening)
DDM-123Drafting & Pattern Making
DDM-123Drafting
20.05.2011Friday (Morning)
DDM-133Sewing Techniques
DDM-134Sewing Techniques
2ND YEARDATE, DAY & TIME ( NEW COURSE ) ( OLD COURSE )
11.05.2011Wednesday (Evening)
GEN-221Islamiyat / Pak. Study
GEN-221Islamiyat / Pak. Study
13.05.2011Friday (Morning)
DDM-213Figure Drafting/ Sketching
DDM-213Figure Drafting/ Sketching
16.05.2011Monday (Morning)
DDM-224Basic Design – I
DDM-224Basic Design – I
17.05.2011Tuesday (Evening)
DDM-232Drafting & Pattern Making-
II
DDM-233Drafting & Pattern Making
19.05.2011Thursday (Morning)
DDM-242Sewing Techniques
DDM-243Sewing Techniques
20.05.2011Friday (Evening)
DDM-253Knit Crafting
DDM-254Knit Crafting
23.05.2011 Monday (Evening)
DDM-263Computer
---------------------
3RD YEARDATE, DAY & TIME ( NEW COURSE ) ( OLD COURSE )
12.05.2011Thursday (Morning)
GEN-311 Islamyat/Pak Study
ISL-331Islamiyat / Pak. Study
13.05.2011Friday (Evening)
MGM-312 Marketing & Business
Management
MGM-312Marketing Business
Management16.05.2011
Monday (Evening)DDM -314
Advance Figure DrawingDDM-314
Advance Figure Drawing18.05.2011
Wednesday (Morning)DDM-324
Textile DesignDDM-324
Advance Design
19.05.2011Thursday (Evening)
DDM-343 Drafting & Pattern Making
DDM-343Drafting and Pattern
Making21.05.2011
Saturday (Morning)DDM -353
SewingDDM-353
Sewing24.05.2011
Tuesday (Morning)------------
DDM-334Fitting Techniques
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 09.00 A.M to 12.00 NOONNew Time: - Evening : 03.00 P.M to 06.00 P.M
Friday : 03.30 P.M to 06.30 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETFOR
DIPLOMA IN FINE ARTSANNUAL EXAMINATION, 2011
THEORY PART – I PRACTICAL PART – I DATE & DAY
NEW TIME SUBJECTSDATE & DAY
NEW TIME SUBJECTS
11.05.2011
Wednesday
08:30 AMto
11:30 AM.
HISTORY OF ARTS
27.06.2011 to 28.06.2011Mon to Tue
09:00AMto
03:00 PMDRAWING
14.05.2011
Saturday
08:30 AMto
11:30 AM.
TECHNICAL METHODS
29.06.2011 to30.06.2011Wed to Thu
09:00AMto
03:00 PMPAINTING
------- ------- -------01.07.2011 to 02.07.2011Fri to Sat
09:00AMto
03:00 PM
ADVERTISING & PUBLICITY DESIGN
------- ------- -------04.07.2011 to 05.07.2011Mon to Tue
09:00AMto
03:00 PMTEXTILE DESIGNING
THEORY PART – II PRACTICAL PART – II DATE & DAY
TIME SUBJECTSDATE & DAY
TIME SUBJECTS
12.05.2011
Thursday
08:30 AMto
11:30 AM.
HISTORY OF ARTS
15.06.2011 to16.06.2011Wed to Thu
09:00AMto
03:00 PMDRAWING
16.05.2011
Monday
08:30 AMto
11:30 AM.ENGLISH
17.06.2011 to18.06.2011Fri to Sat
09:00AMto
03:00 PM
MAJOR SUBJECTS(PAINTING, TEXTILE DESIGNING ADVER: & PUBLICITY DESIGN)
------- ------- -------20.06.2011 to21.06.2011Mon to Tue
09:00AMto
03:00 PM
MAJOR SUBJECTS(PAINTING, TEXTILE DESIGNING ADVER: & PUBLICITY DESIGN)
THEORY PART – III PRACTICAL PART – III DATE & DAY
TIME SUBJECTSDATE & DAY
TIME SUBJECTS
13.05.2011
Friday
08:30 AMto
11:30 AM
ISLAMIYAT / PAK.STUDIES
06.06.2011 to07.06.2011Mon to Tue
09:00AMto
03:00 PMDRAWING
17.05.2011
Tuesday
08:30 AMto
11:30 AM
HISTORY OF ARTS
08.06.2011 to09.06.2011Wed to Thu
09:00AMto
03:00 PM
MAJOR SUBJECTS(PAINTING, TEXTILE DESIGNING ADVER: & PUBLICITY DESIGN)
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETFOR DIPLOMA IN FOOD TECHNOLOGY
ANNUAL EXAMINATION 2011 NEW COURSE ( THEORY )
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
IST YEAR
DATE, DAY & TIME SUBJECTS11.05.2011 Wednesday ( Morning )
Gen-111 Islamiat / Pak Studies
12.05.2011 Thursday ( Evening ) Phy-113 Applied Physics
14.05.2011 Saturday ( Morning ) Math-113 Applied Mathematics-I-A
17.05.2011 Tuesday ( Morning ) Gen-112 English18.05.2011 Wednesday ( Evening )
Math-113 Applied Mathematics-I-B
20.05.2011 Friday ( Morning ) FT-124 General and Food Microbiology
23.05.2011 Monday ( Morning ) FT-113 Intro: to Food Science & Technology
24.05.2011 Tuesday ( Evening ) CH-123 Applied Chemistry
27.05.2011 Friday ( Evening ) Comp-122 Computer Application
2ND YEARDATE, DAY &TIME SUBJECTS
11.05.2011 Wednesday ( Evening )
Gen -211 Islamiat/ Pakistan Studies
13.05.2011 Friday ( Morning ) FT- 213 Food Chemistry
16.05.2011 Monday ( Morning ) FT- 224 Food Analysis and Instrumentation
17.05.2011 Tuesday ( Evening ) FT -233 Principles of Food Engineering
19.05.2011 Thursday ( Morning ) FT- 245 Technology of Foods-I-A
20.05.2011 Friday ( Evening ) FT-252 Food Plant Layout and Hygiene
23.05.2011 Monday ( Evening ) Math- 233 Applied Mathematics-II-A25.05.2011 Wednesday ( Morning )
FT- 245 Technology of Foods-I-B
26.05.2011 Thursday ( Evening ) Math- 233 Applied Mathematics-II-B
31.05.2011 Tuesday ( Morning ) MGM- 221 Business Manag: & Indus: Eco:
3RD YEARDATE, DAY &TIME SUBJECTS
12.05.2011 Thursday ( Morning ) Gen -311 Islamiat/ Pakistan Studies
13.05.2011 Friday ( Evening ) FT- 312 Food and Nutrition
16.05.2011 Monday ( Evening ) FT- 325 Technology of Food-II-A
18.05.2011 Wednesday ( Morning )
FT -333 Quality Control
19.05.2011 Thursday ( Evening ) FT-361 Food Standards and Legislation
21.05.2011 Saturday ( Morning ) FT-342 Food Packaging
24.05.2011 Tuesday ( Morning ) Mgm-311 Indus: Mang: and Human Relations
25.05.2011 Wednesday ( Evening )
FT- 351 Factory and Safety Laws
27.05.2011 Friday ( Morning ) Mgm- 321 Business Communication
28.05.2011Saturday ( Morning) FT- 325 Technology of Food-II-B
30.05.2011 Monday ( Evening ) Ft-373 Waste Management
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 09.00 A.M to 12.00 P.M
New Time: - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2011 NEW COURSE
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
PETROLEUM TECHNOLOGY IST YEAR( THEORY )
DATE, DAY & TIME SUBJECTS
11.05.2011 Wednesday (Morning)
Gen-111Islamiat / Pak. Studies
12.05.2011 Thursday (Evening)Phy-123
Applied Physics
14.05.2011 Saturday (Morning)Math-113
Applied Mathematics-I-Paper-A
17.05.2011 Tuesday (Morning)Gen-112English
18.05.2011 Wednesday (Evening)
Math-113Applied Mathematics-I-Paper-B
20.05.2011 Friday (Morning)Pet-123
Workshop Practice-I
23.05.2011 Monday (Morning)Pet-113
Fundamentals of Petroleum Tech:
24.05.2011 Tuesday (Evening)CH-133
Applied Chemistry
26.05.2011 Thursday (Morning)MT-142
Basic Engineering Drawing
27.05.2011 Friday (Evening)Comp-122
Computer Application
30.05.2011 Monday (Morning)ET-212
Applied Electricity & Electronics
( PRACTICAL ) Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04:00 PM
DATE, DAY & TIME SUBJECTS
27.06.2011 Monday Phy-123
Applied Physics
28.06.2011 TuesdayET-212
Applied Electricity & Electronics29.06.2011 Wednesday MT-142
Basic Engineering Drawing30.06.2011 Thursday Pet-113
Fundamentals of Petroleum Tech:01.07.2011 Friday Pet-123
Workshop Practice-I02.07.2011 Saturday CH-133
Applied Chemistry04.07.2011 Monday Comp-122
Computer ApplicationNote: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be
observed.Morning : 09.00 A.M to 12.00 P.MNew Time (Theory): - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
Morning : 10.00 A.M to 04.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2011 NEW COURSE
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
PETROLEUM TECHNOLOGY 3rd YEAR( THEORY )
DATE, DAY & TIME SUBJECTS
12.05.2011 Thursday (Morning)Gen-311
Islamiat / Pak. Studies
13.05.2011 Friday (Evening)Pet-313
Petroleum Refining
16.05.2011 Monday (Evening)Pet323
Well Logging And Testing18.05.2011 Wednesday (Morning)
Pet-333Gas Technology
19.05.2011 Thursday (Evening)Pet-343
Petroleum Production Technology
21.05.2011 Saturday (Morning)Ar-133
Basic Computer in Petroleum Technology
24.05.2011 Tuesday (Morning)Pet-351
Safety Practices and Procedures25.05.2011 Wednesday (Evening)
Pet-363Instrumentation and Control
27.05.2011 Friday (Morning)Pet-371
Environmental Control
31.05.2011 Tuesday (Morning)Mgm-221
Business Management and Industrial Economics
( PRACTICAL ) Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04:00 PM
DATE, DAY & TIME SUBJECTS
06.06.2011 MondayPet-313
Petroleum Refining
07.06.2011 TuesdayPet323
Well Logging And Testing
08.06.2011 WednesdayPet-333
Gas Technology
09.06.2011 ThursdayPet-343
Petroleum Production Technology
10.06.2011 FridayAr-133
Basic Computer in Petroleum Technology
11.06.2011 SaturdayPet-363
Instrumentation and ControlNote: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be
observed.Morning : 09.00 A.M to 12.00 P.MNew Time (Theory): - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
Morning : 10.00 A.M to 04.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2011 NEW COURSE
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
PETROLEUM TECHNOLOGY 2ND YEAR( THEORY )
DATE, DAY & TIME SUBJECTS
11.05.2011 Wednesday (Evening)
Gen-211Islamiat / Pak. Studies
13.05.2011 Friday (Morning)Pet-253
Fuels and Combustion
16.05.2011 Monday (Morning)Pet-223
Fluid Mechanics & Thermedynamics
17.05.2011 Tuesday (Evening)Pet-213
Petroleum Geology
19.05.2011 Thursday (Morning)MGM-211
Business Communication
20.05.2011 Friday (Evening)Pet-233
Petrochemicals & Industrial Stoichiometry
23.05.2011 Monday (Evening)Math-213
Applied Mathematics-Paper-A25.05.2011 Wednesday (Morning)
Comp-213Computer Application Software
26.05.2011 Thursday (Evening)Math-213
Applied Mathematics-Paper-B
27.05.2011 Friday (Evening)Pet-243
Drilling Technology
( PRACTICAL ) Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04:00 PM
DATE, DAY & TIME SUBJECTS
15.06.2011 WednesdayPet-261
Workshop Practice-II
16.06.2011 ThursdayPet-223
Fluid Mechanics & Thermedynamics
17.06.2011 FridayPet-213
Petroleum Geology
18.06.2011 SaturdayPet-243
Drilling Technology
20.06.2011 MondayPet-233
Petrochemicals & Industrial Stoichiometry
21.06.2011 TuesdayComp-213
Computer Application Software
22.06.2011 WednesdayPet-253
Fuels and CombustionNote: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be
observed.Morning : 09.00 A.M to 12.00 P.MNew Time (Theory): - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
Morning : 10.00 A.M to 04.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2010 NEW COURSE
Time: Morning = 08:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
( THEORY ) IST YEAR
DATE, DAY & TIME
PRECISION MECHINICAL & INSTRUMENTS
TECHNOLOGY
DIE AND MOULD TECHNOLOGY
(4 YEARS COURSE)
SUBJECTS SUBJECTS
11.05.2011 Wednesday (Morning)
Gen-111Islamiat / Pak. Studies
Gen-111Islamiat / Pak. Studies
12.05.2011 Thursday (Evening)
Phy-113Applied Physics
Phy-113Applied Physics
14.05.2011 Saturday (Morning)
Math-113Applied Mathematics-I-Paper-
A
Math-113Applied Mathematics-I-Paper-A
17.05.2011 Tuesday (Morning)
Gen-112English
Gen-112English
18.05.2011 Wednesday (Evening)
Math-113Applied Mathematics-I-Paper-
B
Math-113Applied Mathematics-I-Paper-B
20.05.2011 Friday (Morning)
WT-156Workshop Technology-I
WT-156Workshop Technology-I
23.05.2011 Monday (Morning)
TD-153Technical Drawing
TD-153Technical Drawing
24.05.2011 Tuesday (Evening)
CH-112Applied Chemistry
CH-112Applied Chemistry
26.05.2011 Thursday (Morning)
MS-151Material Science-I
MS-151Material Science-I
27.05.2011 Friday (Evening)
Comp-122Computer Application
Comp-122Computer Application
( PRACTICAL )Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04:00 PM
DATE, DAY & TIME
PRECISION MECHINICAL & INSTRUMENTS
TECHNOLOGY
DIE AND MOULD TECHNOLOGY
(4 YEARS COURSE)
SUBJECTS SUBJECTS
27.06.2011 MondayPhy-113
Applied PhysicsPhy-113
Applied Physics
28.06.2011 TuesdayWT-156
Workshop Technology-IWT-156
Workshop Technology-I29.06.2011 Wednesday
CH-112Applied Chemistry
CH-112Applied Chemistry
30.06.2011 Thursday TD-153
Technical DrawingTD-153
Technical Drawing
01.07.2011 Friday Comp-122
Computer ApplicationComp-122
Computer Application
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 09.00 A.M to 12.00 P.MNew Time (Theory): - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
Morning : 10.00 A.M to 04.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2011 NEW COURSE
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
( THEORY ) 2ND YEAR
DATE, DAY & TIME
PRECISION MECHINICAL & INSTRUMENTS
TECHNOLOGY
DIE AND MOULD TECHNOLOGY
(4 YEARS COURSE)
SUBJECTS SUBJECTS
11-05-2011 Wednesday (Evening)
Gen-211Islamiat / Pak. Studies
Gen-211Islamiat / Pak. Studies
13-05-2011 Friday (Morning)
Phy-212Applied Mechanics
Phy-212Applied Mechanics
16-05-2011 Monday (Morning)
ET-202Applied Electricity &
Electronics
ET-202Applied Electricity &
Electronics17-05-2011 Tuesday (Evening)
MS-212Material Science-II
MS-212Material Science-II
19-05-2011 Thursday (Morning)
MGM-211Business Communication
MGM-211Business Communication
20-05-2011Friday (Evening)
TD-253Technical Drawing and CAD-I
TD-253Technical Drawing and CAD-I
23-05-2011 Monday (Evening)
Math-213Applied Mathematics-II-Paper-A
Math-213Applied Mathematics-II-Paper-A
25-05-2011 Wednesday (Morning)
MT-212Metrology
MT-212Metrology
26-05-2011 Thursday (Evening)
Math-213Applied Mathematics-II-Paper-B
Math-213Applied Mathematics-II-Paper-B
27-05-2011 Friday (Morning)
WT-226Workshop Technology-II
WT-226Workshop Technology-II
31-05-2011 Tuesday (Morning)
MGM-221Business Mangt: & Industrial
Economics
MGM-221Business Mangt: & Industrial
Economics
( PRACTICAL )Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to 04:00 PM
DATE, DAY & TIME
PRECISION MECHINICAL & INSTRUMENTS TECHNOLOGY
DIE AND MOULD TECHNOLOGY
(4 YEARS COURSE)
SUBJECTS SUBJECTS
15-06-2011 Wednesday
WT-226Workshop Technology-II
WT-226Workshop Technology-II
16-06-2011 Thursday
TD-253Technical Drawing and CAD-I
TD-253Technical Drawing and CAD-I
17-06-2011 FridayMT-212
MetrologyMT-212
Metrology
18-06-2011 Saturday
ET-202Applied Electricity & Electronics
ET-202Applied Electricity &
Electronics
20-06-2011 MondayPhy-212
Applied MechanicsPhy-212
Applied MechanicsNote: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be
observed.Morning : 09.00 A.M to 12.00 NOONNew Time (Theory): - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
Morning : 10.30 A.M to 04.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2011 NEW COURSE
Time: Morning = 8:00 AM to 11:00 AM Evening = 2:00 PM to 5:00 PM (Friday Evening 2:30 PM to 5:30 PM)
( THEORY ) 3RD YEAR
DATE, DAY & TIME
PRECISION MECHINICAL & INSTRUMENTS
TECHNOLOGY
DIE AND MOULD TECHNOLOGY
(4 YEARS COURSE)
SUBJECTS SUBJECTS
12-05-2011 Thursday(Morning)
Gen-311Islamiat / Pak. Studies
Gen-311Islamiat / Pak. Studies
13-05-2011 Friday (Evening)
IS-322Instrument Science
DM-351Tool Technology-I
16-05-2011 Monday (Evening)
MT-323Applied Thermodynamics and
Energy conseration
MT-323Applied Thermodynamics and
Energy conseration18-05-2011 Wednesday(Morning)
Mt-343Machine Design
Mt-343Machine Design
19-05-2011 Thursday (Evening)
MT-332Industrial Engr: (Industrial
Planing & Production Methods)
MT-332Industrial Engr: (Industrial
Planing & Production Methods)21-05-2011Saturday (Morning)
TD-362Technical Drawing and CAD-II
TD-362Technical Drawing and CAD-II
24-05-2011 Tuesday (Morning)
IPI-323Industrial Process Instrumentation
DM-372Special Purpose Machines
25-05-2011 Wednesday (Evening)
WT-354Workshop Technology-III
DM-384Workshop Technology-DM
27-05-2011 Friday (Morning)
MT-362Material Testing & Heat
Treatment
MT-362Material Testing & Heat
Treatment
28-05-2011 Saturday (Morning)
MT-382Computer Integrated Manufacturing (CIM)
DM-361Tool Technology-II
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 09.00 A.M to 12.00 NOONNew Time (Theory): - Evening : 03.00 P.M to 06.00 P.MFriday : 03.30 P.M to 06.30 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEET FOR DIPLOMA IN DRESS DESIGNING AND MAKING
ANNUAL EXAMINATION 2011 (NEW & OLD COURSE )
PRACTICAL Time: 9:00 AM to 03:00 PM
(Friday 9:00 AM to 01:00 PM & 02:00 PM to 04:00 PM)
3RD YEARDATE, DAY & TIME ( NEW COURSE ) ( OLD COURSE )
06.06.2011 MONDAYAND
07.06.2011 TUESDAY
DDM-314Advance Figure Drawing
(Category “A” Subjects)
DDM-314Advance Figure Drawing
( Category “A” Subjects)
-DO-DDM-324
Advance Design (Category “A” Subjects)
DDM-324Advance Design
(Category “A” Subjects)
-DO-DDM-334
Fitting Techniques(Category “A” Subjects)
DDM-334Fitting Techniques
(Category “A” Subjects)
-DO-DDM-343
Drafting and Pattern Making(Category “A” Subjects)
DDM-343Drafting and Pattern Making(Category “A” Subjects)
-DO-DDM-353
Sewing(Category “A” Subjects)
DDM-353Sewing
(Category “A” Subjects)
2ND YEARDATE, DAY & TIME ( NEW COURSE ) ( OLD COURSE )
15.06.2011 WEDNESDAYAND
16.06.2011 THURSDAY
DDM-213 Figure Drawing & Sketching
(Category “A” Subjects)
DDM-213 Figure Drawing & Sketching(Category “A” Subjects)
-DO-DDM-224
Basic Design-I(Category “A” Subjects)
DDM-224Basic Design-I
(Category “A” Subjects)
-DO-DDM-232
Drafting & Pattern Making-II(Category “A” Subjects)
DDM-232Drafting & Pattern Making-II(Category “A” Subjects)
-DO-DDM-242
Sewing Techniques(Category “A” Subjects)
DDM-242Sewing Techniques
(Category “A” Subjects)
-DO-DDM-253
Knitting Craft(Category “A” Subjects)
DDM-253Knitting Craft
(Category “A” Subjects)
17.06.2011 FRIDAYDDM-263Computer
DDM-263Computer
IST YEAR
DATE, DAY & TIME ( NEW COURSE ) ( OLD COURSE )
27.06.2011 MONDAY AND
28.06.2011 TUESDAY
DDM-116Machine/Hand Embroidery(Category “A” Subjects)
DDM-116Machine/Hand Embroidery(Category “A” Subjects)
-DO- DDM-123Drafting & Pattern Making(Category “A” Subjects)
DDM-123Drafting & Pattern Making(Category “A” Subjects)
-DO-DDM-133
Sewing Techniques(Category “A” Subjects)
DDM-133 Sewing Techniques
(Category “A” Subjects)
-DO-DDM-141Fine Art
(Category “A” Subjects)
DDM-141Fine Art
(Category “A” Subjects)
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 10.00 A.M to 04.00 P.MNew Time: - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEET FOR DIPLOMA IN FOOD TECHNOLOGY Time: 9:00 AM to 03:00 PM (Excluding)
(Friday 09:00 AM to 01:00 PM & 02:00 PM to 04:00 PM)
ANNUAL EXAMINATION, 2011
( PRACTICAL ) 3RD YEAR
DATE & DAY SUBJECTS
06.06.2011 Monday FT-325 Technology of Food-2
07.06.2011 Tuesday FT-333 Quality Control
08.06.2011 Wednesday FT-342 Food Packaging
09.06.2011 Thursday FT-373 Waste Management
10.06.2011 Friday FT-382 Special Project
2ND YEAR
DATE & DAY SUBJECTS
15.06.2011 Wednesday FT -213 Food Chemistry
16.06.2011 Thursday FT- 224 Food Analysis and Instrumentation
17.06.2011 Friday FT- 233 Principles of Food Engineering
18.06.2011 Saturday FT- 245 Technology of Foods-I
20.06.2011 Monday FT- 252 Food Plant Layout and Hygiene
1 ST YEAR
DATE & DAY SUBJECTS
27.06.2011 Monday PHY-113 Applied Physics
28.06.2011 Tuesday CH-123 Applied Chemistry
29.06.2011 Wednesday Comp-122 Computer Application
30.06.2011 Thursday MTF-111 Engineering Drawing
01.07.2011 Friday MTF-121 Workshop Practice
02.07.2011 Saturday FT-113 Intro: to Food Sc: and Technology
04.07.2011 Monday FT-124 General and Food Microbiology
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 10.00 A.M to 04.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR IST YEAR
DATE SHEET PRACTICALFOR DIPLOMA OF ASSOCIATE ENGINEER 1ST YEAR NEW COURSE SUBJECTWISE PRACTICAL ANNUAL EXAMINATION 2011
Time = 09:00 A.M to 03:00 P.M (Excluding) Friday= 09:00 A.M to 01:00 P.M & 02:00 P.M to 04:00 P.M
DATE & DAY Auto Technology
Auto + Farm Technology
Chemical Technology
Civil Technology
Electrical Technology
Mechanical Technology
Electronics Technology
R.A.C. Technology
Architect: Technology
Telecomm: Technology Bio-Medical Comp-
Hardware
27.06.2011Monday
And 28.06.2011
Tuesday
Category "A"MT-153
Engineering Drawing
Category "A"MT-153
Engineering Drawing
Category "A"DRG-183
Basic Engineering Drawing and
CAD-I
Category "A"CT-133
Civil Drafting
Category "A"ET-121
Basic Electrical Drawing
Category "A"MT-143
Basic Engg Drawing & CAD-I
Category "A"ELT-127
Components App:& Assembly
Category "A"MT-111Technical Drawing
Category "A"AR-123
Architectural Drg & Drafting
Category "A"TC-127
Telecom: Drawg: General Engg:
PHY-122Applied Physics
28.06.2010Monday
PHY-123Applied Physics
28.06.2010Monday
Category "A"MT-164
Workshop Practice-I (a) Mach:
Shop Safety Metal Shop
Welding (b) Practice &
Foundry
Category "A"MT-164
Workshop Practice-I
(a) Machine Shop (b) Metal Shop
Welding Practice & Foundry
___Category "A"
CT-114Surveying-I
Category "A"ET-146
Workshop Practice-I
i-Metal Work ii-Wood Work
iii-Welding
Category "A"MT-116
Workshop Practice-I i-
Metal Work ii-Wood Work
iii-Weld: Forging iv-Foundry
Category "A"ELT-127
(a) Electrical Engineering
(abc) i-Fitting Shop ii-
Wood Work Shop
Category "A"ET-111Applied
Electricity
Category "A"AR-142
Free Hand Drawing & Rendering
Category "A"TC-127
i- Fitting Shop ii-Woodwork
Shop iii- Electr: Wiring
iv- Electr: Components App:
& Assembly
CH-112Applied
Chemistry
29.06.2010Tuesday
CH-132Applied
Chemistry
29.06.2010Tuesday
___ ___ ___
Category "A"SHOP-162Workshop Practice
(a) Woodwork (b)House Hold
Wiring
___ ___ ___
Category "A"RACT-123
Workshop Basic Electr: Applied to
HVAC&R Metal/Machine &
Welding Shop
Category "A"AR-154
Surveying and Levelling
____ ____ ____
29.06.2011Wednesda
y
Category "B"AD-113
Automotive Electrics + Electronics
Category "B"AD-123
I.C. Engines
Category "B"CHT-164General
Chemistry
Category "B"CT-123
Construction-I
Category "B"CH-132Applied
Chemistry
___
Category "B"COMP-111Computer Application
Category "B"COMP-122Computer Application
Category "B"AR-132
Basic Comp: in Arch:
Category "B"TC-114
Tele-Comm: Electr:
Network
COMP-122Computer Application
COMP-114Electrical
Essentials & Networks
30.06.2011Thursday
Category "B"PHY-122Applied Physics
Category "B"AD-113
Automotive Electrics + Electronics
Category "B"COMP-122Computer Application
Category "B"CH-112Applied
Chemistry
Category "B"ET-146iv)Wiring
Category "B"PHY-122
Applied Physics
Category "B"ELT-114Electrical
Essential & Net Work
Category "B"CH-112Applied
Chemistry
___
Category "B"TC-127
ii)Electrical Wiring
ELT-114Electrical
Essentials & Networks
COMP-123Electronic Devices &
Circuits-I
01.07.2011Friday
Category "B"COMP-122Computer Application
Category "B"COMP-122Computer Application
Category "B"PHY-113Applied Physics
Category "B"PHY-122Applied Physics
Category "B"ET-115
Principle of Electr: Engg:
Category "B"COMP-122Computer Application
Category "B"PHY122Applied Physics
Category "B"PHY-122Applied Physics
Category "B"PHY-122Applied Physics
Category "B"COMP-111Computer Application
BMI-112Electronic
Components, Application &
Assembly
COMP-131Electrical Drawing
02.07.2011Saturday
Category "B"AD-123
I.C. Engines
Category "B"PHY-122Applied Physics
Category "B"CHT-153
Basic Chemical
Engineering
___
Category "B"COMP-122Computer Application
Category "B"CH-112Applied
Chemistry
Category "B"ELECT-127
Electrical Wiring
Category "B"RACT-113Principles of Refrigeration
___
Category "B"PHY-122Applied Physics
BMI-112Fundamentals of Bio-Medical Equipment &
Interfaces
COMP-141General
Engineering Workshop
04.07.2011Monday
_____ _____ _____ _____ _____ _____ _____ _____ _____ _____ BMI-123General
Engineering (a) Machine
COMP-152Computer Application
Shop, Metal Work & Pipe Engineering (b) Technical
Drawing (c) Electrical
Wiring
Lab
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR 2 ND YEAR
DATE SHEET PRACTICALFOR DIPLOMA OF ASSOCIATE ENGINEER 2ND YEAR NEW COURSE SUBJECTWISE PRACTICAL ANNUAL EXAMINATION 2011
Time = 09:00 A.M to 03:00 P.M (Excluding) Friday= 09:00 A.M to 01:00 P.M & 02:00 P.M to 04:30 P.M
DATE &
DAYAuto Auto +
Farm Chemical Civil Electrical Mechanical Electronics R.A.C. Architecture Telecomm: Bio-Medical Comp-Hardware
15.06.2011
Wednesday
And16.06.201
1Thursday
Category "A"AD-234
Work Shop Practice - II
Category "A"AD-234
Work Shop Practice - II
___
Category "A"1. CT-233 Constru: - II 2. CT-243
Civil Drafting - II
Category "A"1. ET-242 Installation Planning & Estimating 2. ET-271 Wrok Shop Practice - I
Basic Machine Shop
Category "A"1. MT-223
Engg: Drawing-II A. Machine
Drg: B. CAD-II
2. MT-236 Workshop Pract: -II
A. Machine Drawing
B. Foundry & Pattern Making C. Adv: Welding
_____
Category "A"1.RACT-233 Engg: & Arch:
Drg: 2. RACT-253
Wrok Shop Practice -II
Category "A"1. AR-224
Arch: Design & Drawing-I 2. AR-242 Free Hand
Drg: & Rendering-II 3. AR-253
Build: Const-I
Category "A"TC-222
Digital Circuits & Micro
Processor
BM-214Solid State Electronics
16.06.2010Wednesday
COMP-214Computer
Organization & Basic
Programming
16.06.2010Wednesday
BM-233Electrical
Machine & Industrial
Electronics
17.06.2010Thursday
COMP-232Motors &
Power Supply
17.06.2010Thursday
17.06.2011
Friday
Category "B"AD-212Applied
Thermodyn:
Category "B"AD-212Applied
Thermodyn:
Category "B"CHT-254Industrial Chemical Process-I
Category "B"CT-212Public Health
Engineering
Category "B"ET-213
DC Machines & Batteries
Category "B"MT-212
Metrology
Category "B"ELT-222Motors &
Generators
Category "B"PHY-212Applied
Mechanics
Category "B"AR-214
Structural Mechanics RCC Design
Category "B"CH-222Applied
Chemistry
ELT-233Measuring
Instruments
COMP-243Digital Elect:
& Microprocess
or
18.06.2011
Saturday
Category "B"AD-223
Suspension Steer:& Brakes
Category "B"PHY-212Applied
Mechanics
Category "B"CHT-293Chemical
Engg-I
Category "B"CT-253
Mechancis of Structures
Category "B"PHY-222
Applied Physics
Category "B"ET-202
App: Electricity & Electronics
Category "B"ELT-233
Measuring Instruments
Category "B"RACT-223
App:Therm:& Low Pressure
Category "B"AR-233
AtuoCAD-I
Category "B"TC-243Radio
Comm:Sys-I
BM-242Operational Amplifier & Application
COMP-253Measuring
Instruments
20.06.2011
Monday
Category "B"AD-243
Problem in I.C Engines
Category "B"CH-213Applied
Chemistry
Category "B"CHT-244Organic
Chemistry
Category "B"CT-262Quantity
Surveying-I
Category "B"ET-223
Electrical Instt:& Meas:
Category "B"PHY-212Applied
Mechanics
Category "B"ELT-264
Amp:&Radio Receivers
Category "B"RACT-214Principle of Aircondit:
_____
Category "B"TC-253
Telephone & Exchange
BM-212Patients Safety &
Ultrasound Radiation Physics
COMP-262Controls & Automation
21.06.2011
Tuesday
Category "B"MT-252
Metrology
Category "B"AF-222
Crop Husbandry
Category "B"CHT-283Physical
Chemistry
Category "B"Comp - 222
Computer Application
Category "B"ET-251
App: of Comp: in Elect. Tech
___
Category "B"ELT-214
Elec:Devices & Circuits
_____ ______Category "B"
TC-262Power Plant
BM-223X-Ray & Film Processing
Eq:
COMP-223Electronics Devices & Circuits – II
22.06.2011
Wednesday
Category "B"CH-213Applied
Chemistry
Category "B"AF-213
Farm Machinery-I
Category "B"CHT-263
Quantitative Analysis
Category "B"CT-224
Surveying -I
Category "B"ET-263Basic
Electronics
____
Category "B"ELT-252Comm:
System-I
____ _____
Category "B"TC-214
Tele-Comm: Ele:&Circuits
BM-222Digital
Electronics
____
24306.2011
Thursday
Category "B"PHY-212Applied
Category "B"AD-223
Suspension _____ _____
Category "B"ET-233
Utilization of ____
Category "B"ELT-243
Pulse & Digital _____ _____
Category "B"TC-233
Measuring _____ _____
Mechanics Steering & Brakes
Electrical Energy Circuits Instruments
24.06.2011
Friday_____ ______ _____ _____ _____ ____
Category "B"CH-213Applied
Chemistry
_____ _____ ___ _____ _____
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
3 RD YEAR
DATE SHEET PRACTICALFOR DIPLOMA OF ASSOCIATE ENGINEER 3RD YEAR NEW COURSE SUBJECTWISE PRACTICAL ANNUAL EXAMINATION 2011
Time = 09:00 A.M to 03:00 P.M (Excluding) Friday= 09:00 A.M to 01:00 P.M & 02:00 P.M to 04:00 P.M DATE &
DAYAuto
TechnologyAuto Farm Technology
Chemical Technology
Civil Technology
Electrical Technology
Mechanical Technology
Electronics Technology
R.A.C. Tech:
Bio-Medical
Technology
Comp:Hardware
Tech:
Architecture Technology
Telecom: Technology
06.06.2011Monday
AD-313Computer App:
in CAD & Automation
AD-313Computer
App: in CAD &
Automation
CHT-314Instrumental Methods of
Analysis
CT-322Quantity
Surveying II
ET-316AC Machines
MT-323App:
Thermodynam: & Energy
Conservation
ELT-312Communication System
II
RACT-314Air Conditi:
System Design
BM-312Opto
Electronics, Fiber Optics
& Laser
COMP-314Computer
Maintenance & Servicing
AR-373Estimation and Specification
by laws
TC-312Radio
Communication System II
07.06.2011Tuesday
AD-323Fuel Injection & Carburation
AD-323Fuel
Injection & Carburation
CHT-324Industrial Chemical Process
II
CT-333Public Health Engineering
II
ET-335Transmission Distribution &
Protec: of Electrical
Power System.
MT-332Industrial
Engg: Industrial
Planning & Production Methods
ELT-326TV Circuits &
System
RACT-334Control and
Instrumentation
BM-324Fund: of
Micro Process & Interfacing
Tech:
COMP-323Computer
Peripherals & Interfacing
AR-324Arch. Design &
Drawing II
TC-325TV Circuits
and Systems
08.06.2011Wednesday
AD-333Automotive
Transmission
AD-333Automotive Transmissi
on
CHT-335Chemical
Engineering II
CT-344Hydraulics &
Irrigation
ET-343Telecom:
MT-343Machine Design
ELT-333Industrial
Electronics
RACT-352Technical
Project
BM-322Sterilization Autoclaves
& Med: Gases,
Vacuum
COMP-332Data
COmmun: & Computer Network
AR-333Auto CAD
II
TC-332Antenna and
Wave Propagation
09.06.2011Thursday
AD-342Motor Vehicle
Inspection
AD-342Motor
Vehicle Inspection
CHT-362Energy
Conservation / Pollution
CT-353Railways,
Docks, Har: & Bridges
ET-353Repair &
Maintenance of Elect:
Equipment
MT-353Tool Design & Making
ELT-342Antina &
transmission Lines
RACT-373RAC
Workshop Practice
III
BM-334ECG &
Ultrasound Equ:
COMP-344Operating
System & C language
AR-342Model Making /
Project
TC-342Microprocessor Applic: &
Interfaces
10.06.2011Friday
AD-353Auto body building & finishing
AF-312Soils &
Fertilizers
CHT-352Chemical
Technology Practice
CT-373Soil Mechanics
Highway & Airports
ET-364Digital & Industrial
Electronics
MT-362Materials Testing &
Heat Treatment
ELT-363Microproces
sor & Microcomput
er
___BM-342
Bio Chemistry &
Clinic Lab Equ:
COMP-352Computer Hardware
AR-353Building
Construction II
TC-352Telecom
Equipment Servicing
11.06.2011Saturday
AD-362Motor Vehicle
Driving
AF-323Farm
Machinery II
___CT-381
Civil Engineering
Project
___MT-374
Workshop Practice
II
ELT-371Equipment Servicing &
Project (Lab)
___BM-354
Therapeutic Bio Medical
Equ:
COMP-362Microprocess
or Programming
___
TC-363Digital Comm:
13.06.2011Monday
AD-374Workshop Practice
III
AF-332Earth
Moving Machinery
___CT-364
Concrete Tech: & R.C.C. Design
___MT-382
Computer integrated Manufat:
___ ________ _______ ___
TC-372Project
14.06.2011Tuesday
MT-392Metallurgy &
Heat Treatment
AF-344Workshop Practice
III
___ ___ ___MT-312
Hydraulics & Hydraulics Machine
___ ___ ______ _______ ___
TC-382Fiber Optics & Satellite
Comm:
KHYBER PAKHTUNKHWA BOARD OF TECHNICAL EDUCATION, PESHAWAR
DATE SHEETANNUAL EXAMINATION 2011 NEW COURSE
( PRACTICAL ) 3RD YEAR Time: 09.00.A.M. to 03.00.P.M. ( Excluding )
FRIDAY 09:00 AM. to 01.00 PM & 2:00 PM to
04.00 PM
DATE, DAY & TIME
PRECISION MECHINICAL & INSTRUMENTS TECHNOLOGY
DIE AND MOULD TECHNOLOGY
(4 YEARS COURSE)
SUBJECTS SUBJECTS
06-06-2011 MondayMT-323
Applied Thermodynamics and Energy conseration
MT-323Applied Thermodynamics and
Energy conseration
07-06-2011 TuesdayMT-332
Industrial Engr: (Industrial Planing & Production Methods)
MT-332Industrial Engr: (Industrial
Planing & Production Methods08-06-2011 Wednesday
Mt-343Machine Design
Mt-343Machine Design
09-06-2011 Thursday
IPI-323Industrial Process Instrumentation
DM-372Special Purpose Machines
10-06-2011 FridayMT-362
Material Testing & Heat Treatment
MT-362Material Testing & Heat
Treatment11-06-2011 Sasturday
WT-354Workshop Technology-III
DM-384Workshop Technology-DM
13-06-2011 MondayMT-382
Computer Integrated Manufacturing (CIM
------------
14-06-2011 TuesdayTD-362
Technical Drawing and CAD-II) TD-362
Technical Drawing and CAD-II15-06-2011 Wednesday
IS-322Instrument Science
-----------
Note: - In case the Govt. orders moving the clock (one hour advance) then the following timings shall be observed.
Morning : 10.00 A.M to 03.00 P.MNew Time (Practical): - Friday : 10.00 A.M to 02.00 P.M &
03.00 P.M to 05.00 P.M
( Hazrat Zubair ) Controller of Examinations