DAP-3520 A1 Manual
-
Upload
alex-dos-anjos -
Category
Documents
-
view
240 -
download
0
Transcript of DAP-3520 A1 Manual
-
8/2/2019 DAP-3520 A1 Manual
1/80
-
8/2/2019 DAP-3520 A1 Manual
2/80
D-Lnk DAP-3520 User Manual
D-Link reserves the right to revise this publication and to make changes in the content hereo without obligation tonotiy any person or organization o such revisions or changes.
Manual Revisions
Trademarks
D-Link and the D-Link logo are trademarks or registered trademarks o D-Link Corporation or its subsidiaries in theUnited States or other countries. All other company or product names mentioned herein are trademarks or registeredtrademarks o their respective companies.
Copyright 2009 by D-Link Systems, Inc.
All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permissionrom D-Link Systems, Inc.
Revision Date Description
1.0 March 3, 2009 DAP-3520 Revision A1 with rmware version 1.00
Preace
-
8/2/2019 DAP-3520 A1 Manual
3/80
-
8/2/2019 DAP-3520 A1 Manual
4/80
D-Lnk DAP-3520 User Manual
Login Settings ..............................................55
Console Settings ..........................................56
SNMP Settings .............................................57
Ping Control Setting .....................................58
Firmware and SSL Certication Upload .......59
Conguration File .........................................60Time and Date ..............................................61
System .............................................................62
System Settings ...........................................62
Help .................................................................63
Troubleshooting.64
Technical.Specifcations. 67
Warranty.69
Technical.Support.75
Registration.76
-
8/2/2019 DAP-3520 A1 Manual
5/80
D-Lnk DAP-3520 User Manual
Product Overview
Note: Using a power supply with a dierent voltage rating than the one included with the access point will cause damage and void the warranty or this product.
Package Contents
D-Link.DAP-3520.Access.Point
Mounting.Plate
Power.Adapter.with.Power.Cord
Power.over.Ethernet.Base.Unit
4M.Ethernet.Cable Grounding.Wire
CD-ROM Screws
-
8/2/2019 DAP-3520 A1 Manual
6/80
2D-Lnk DAP-3520 User Manual
Network.Requirements
An Ethernet-based Cable or DSL modem
IEEE 802.11n-drat or 802.11g wireless clients IEEE 802.11a wireless clients 10/100/1000 Ethernet
Web-based.Confguration.Utility.Requirements
Computer.with.the.ollowing: Windows, Macintosh, or Linux-based operating system An installed Ethernet adapter
Browser.Requirements: Internet Explorer 7.0 or later Fireox 3.0 or later Chrome 1.0.154.36 or later
Windows.Users: Make sure you have the latest version o Javainstalled. Visit www.java.com to download the latest version.
CD.Installation.Wizard.Requirements
Computer.with.the.ollowing:
Windows XP with Service Pack 2 or Vista An installed Ethernet adapter CD-ROM drive
System Requirements
-
8/2/2019 DAP-3520 A1 Manual
7/80
3D-Lnk DAP-3520 User Manual
IntroductionThe DAP-3520 802.11a/n or b/g/n switchable AP increases productivity by allowing you to work aster and moreeciently. With the DAP-3520, bandwidth-intensive applications like graphics or multimedia will benet signicantlybecause large les are now able to move across the network quickly.
The DAP-3520 is capable o operating in one o ve dierent wireless networking modes: access point, WDS (WirelessDistribution System) with AP, WDS, Wireless Client, or WISP (Wireless Internet Service Provider) Client Routermode.
Use less wiring, enjoy increased fexibility, save time and money with PoE (Power over Ethernet). With PoE, the DAP-3520shares power and data over the CAT5 cable, making the setup o your network less expensive and more convenient.
An ideal solution or quickly creating and extending a wireless local area network (WLAN) in oces or other workplaces,
trade shows, and special events, the DAP-3520 provides data transer rates up to 300Mbps*. (The 802.11n standard isbackwards compatible with 802.11a, 802.11g, and 802.11b devices.)
* Maximum wireless signal rate derived rom IEEE Standard 802.11g, 802.11a and Drat 802.11n specications. Actual data throughput will vary. Network conditions and
environmental actors, including volume o network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmentalconditions will adversely aect wireless signal range.
-
8/2/2019 DAP-3520 A1 Manual
8/80
D-Lnk DAP-3520 User Manual
Features. Faster.Wireless.Networking - The DAP-3520 provides up to 300Mbps* wireless connection with other 802.11n
wireless clients. This capability allows users to participate in real-time activities online, such as video streaming,online gaming, and real-time audio. The perormance o this 802.11n wireless router gives you the reedom o wireless
networking at speeds 14x aster than 802.11g.
. Compatible.with.80211a.and.80211g.Devices - The DAP-3520 is still ully compatible with the IEEE 802.11a/gstandard, so it can connect with existing 802.11a/b/g PCI, USB and Cardbus adapters.
. Four.Dierent.Operation.Modes - Capable o operating in one o our dierent operation modes to meet yourwireless networking needs: Access.Point, WDS.with.AP, WDS, Wireless.Client.
. Better.security.with.WPA -The DAP-3520 can securely connect wireless clients on the network using WPA (Wi-Fi
Protected Access) to provide a much higher level o security or your data and communications.
AP.Manager.II.Management.Sotware -The real-time display o the network's topology and APs inormation makesnetwork conguration and management quick and simple.
. SNMP.or.Management - The DAP-3520 is not just ast, but also supports SNMP v.3 or better network management.Superior wireless AP manager sotware is bundled with the DAP-3520 or network conguration and rmware upgrade.Systems administrators can also set up the DAP-3520 easily with the Web-based conguration. A D-Link D-View
6.0 module will be downloadable or network administration and real-time network trac monitoring with the D-View6.0 sotware.
* Maximum wireless signal rate derived rom IEEE Standard 802.11a, 802.11g, and Drat 802.11n specications. Actual data throughput will vary. Networkconditions and environmental actors, including volume o network trac, building materials and construction, and network overhead, lower actual data
throughput rate. Environmental conditions will adversely aect wireless signal range.
-
8/2/2019 DAP-3520 A1 Manual
9/80
5D-Lnk DAP-3520 User Manual
Five Operational Modes
Operation.Mode(Only supports 1 mode at a time) Function
Access Pont (AP) Create a wreless LAN
WDS wth AP Wrelessly connect multple networks whle stll functonng as a wreless AP
WDS Wrelessly connect multple networks. See the dagram below.
Wreless Clent AP acts as a wreless network adapter for your Ethernet-enabled devce
Example o a typical setup using WDS mode.
-
8/2/2019 DAP-3520 A1 Manual
10/80
D-Lnk DAP-3520 User Manual
Connecting PoE (Power over Ethernet)
Connect one end o an Ethernet cable (included with your package) to the LAN port on the DAP-3520 and the other endo the Ethernet cable to either your computer or to your PoE switch. The AP can be powered on by a PoE switch or bythe power adapter shipped with the AP.
-
8/2/2019 DAP-3520 A1 Manual
11/80
D-Lnk DAP-3520 User Manual
LED Color Status Description
Power Green Sold Green The devce s ready.
Lght Off The devce s powerng off.
Red Blnkng Red The devce s bootng up.
LAN Green Sold Green The lnk s up.
Blnkng Green Data s beng transmtted.
Lght Off The lnk s down.
WLAN Green Sold Green Wreless s ready.
Blnkng Green Data s beng transmtted.
Lght Off Wreless s off.
Hardware OverviewConnections
-
8/2/2019 DAP-3520 A1 Manual
12/80
D-Lnk DAP-3520 User Manual
To congure the DAP-3520, use a computer which is connected to the DAP-3520 with an Ethernet cable (see theNetwork Layout diagram).
First, disable the option o accessing the Internet using a proxy server unction. To disable this unction, go to Control.Panel > Internet.Options > Connections > LAN.Settings and uncheck the enable box. Click OK.
ConfgurationThis section will show you how to congure your D-Link wireless access point using the web-based conguration utility.I you would like to use the AP Manager II sotware, please reer to the documentation located on the D-Link CD.
Web-based Confguration Utility
-
8/2/2019 DAP-3520 A1 Manual
13/80
D-Lnk DAP-3520 User Manual
Start your web browser (Internet Explorer, Mozilla Fireox).
Type the IP address o the DAP-3520 in the address eld ( http://192168050) andpress Enter. Make sure that the IP addresses o the DAP-3520 and your computer arein the same subnet.
Ater the connection is established, you will see the user identication window as shown.
Note:If you have changed the default IP address assigned to the DAP-3520, make sure to enter the correct IP address.
Type admin in the User.Name.eld.
Leave the Password eld blank.
Click the Login.button..
-
8/2/2019 DAP-3520 A1 Manual
14/80
0D-Lnk DAP-3520 User Manual
Ater successully logging into the DAP-3520, the ollowing screen will appear:
When making changes on most o the conguration screens in this section, use the Apply button at the bottom o each screen to saveyour conguration changes.
Click the Apply button to congure changes.
-
8/2/2019 DAP-3520 A1 Manual
15/80
D-Lnk DAP-3520 User Manual
Wireless Settings
Wireless Band:Select either 2.4GHz or 5.0GHz rom the drop-downmenu.
Mode:.Select.Access.Point rom the drop-down menu. Theother our choices are WDS.with.AP, WDS, Wireless.Client, and.WISP.Client.Router.
Network Name (SSID):.Service Set Identier (SSID) is the name designated or aspecic wireless local area network (WLAN). The SSIDsactory deault setting is dlink. The SSID can be easilychanged to establish a new wireless network. The SSIDcan be up to 32 characters and is case sensitive.
SSID Visibility:Select Enable to broadcast the SSID across the network,thus making it visible to all network users. Select Disableto hide the SSID rom wireless users.
Auto Channel Selection:Enabling this eature automatically selects the channelthat provides the best wireless perormance. Enable isset by deault. The channel selection process only occurswhen the AP is booting up.
Channel:All devices on the network must share the same channel.To change the channel, rst toggle the Auto ChannelSelectionsetting to Disable, and then use the drop-downmenu to make the desired selection.
Note:Wireless clients will automatically scan and match
the wireless channel of the DAP-3520.
-
8/2/2019 DAP-3520 A1 Manual
16/80
2D-Lnk DAP-3520 User Manual
Channel Width:Allows you to select the channel width you would like to operate in. Select 20.MHz i you are not using any 802.11n wireless clients orselect Auto.20/40.MHz.to use both 802.11n and non-802.11n wireless devices on your network.
Authentication:Use the drop-down menu to choose Open.System, Shared.Key, WPA-Personal, or WPA-Enterprise.
Select Open.System to communicate the key across the network.
Select Shared.Key to limit communication to only those devices that share the same WEP settings. I multi-SSID is enabled,this option is not available.
Select WPA-Personal. to secure your network using a password and dynamic key changes. No RADIUS server isrequired.
Select WPA-Enterprise to secure your network with the inclusion o a RADIUS server.
-
8/2/2019 DAP-3520 A1 Manual
17/80
3D-Lnk DAP-3520 User Manual
WDS with AP mode
Wireless Band:
Select either 24.GHz or 5.GHz rom the drop-down menu.
Mode:WDS.with.AP mode is selected rom the drop-down menu.
Network Name (SSID):Service Set Identier (SSID) is the name designated or aspecic wireless local area network (WLAN). The SSIDsactory deault setting is dlink. The SSID can be easily changedto connect to an existing wireless network or to establish a
new wireless network.
SSID Visibility:Select Enable to broadcast the SSID across the network, thusmaking it visible to all network users. Select Disable to hidethe SSID rom wireless users.
Auto Channel Selection:Enabling this eature automatically selects the channel thatwill provide the best wireless perormance. This eature is
not supported in WDS with AP mode. The channel selectionprocess only occurs when the AP is booting up.
Channel:All devices on the network must share the same channel. Tochange the channel, rst toggle the Auto Channel Selectionsetting to Disable, and then use the drop-down menu to makethe desired selection.
Note:Wireless clients will automatically scan and match the
wireless channel of the DAP-3520.
In WDS with AP mode, the DAP-3520 wirelessly connects multiple networks while still unctioning as a wireless AP at the same time.
-
8/2/2019 DAP-3520 A1 Manual
18/80
D-Lnk DAP-3520 User Manual
Channel Width:Allows you to select the channel width you would like to operate in. Select 20.MHz i you are not using any 802.11n wireless clients orselect Auto.20/40.MHz.to use both 802.11n and non-802.11n wireless devices on your network.
Remote AP MAC Address:Enter the MAC addresses o the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Site Survey:Site Survey will display available wireless networks. Click on the Scan button to search or available wireless networks, then click on theavailable network that you want to connect with.
Authentication:Use the drop-down menu to choose Open.System, Shared.Key, or WPA-Personal.
Select Open.System to communicate the key across the network.
Select Shared.Key to limit communication to only those devices that share the same WEP settings. I multi-SSID is enabled,this option is not available.
Select WPA-Personal. to secure your network using a password and dynamic key changes. No RADIUS server isrequired.
-
8/2/2019 DAP-3520 A1 Manual
19/80
5D-Lnk DAP-3520 User Manual
WDS mode
In WDS mode, the DAP-3520 wirelessly connects multiple networks, without unctioning as a wireless AP.
Wireless Band:Select either 24GHz or 5GHz rom the drop-down menu.
Mode:WDS.mode is selected rom the drop-down menu. Accesspoints using WDS must be on the same channel in orderto establish connectivity.
Network Name (SSID):Service Set Identier (SSID) is the name designated or aspecic wireless local area network (WLAN). The SSIDsactory deault setting is dlink. The SSID can be easilychanged to connect to an existing wireless network or toestablish a new wireless network.
SSID Visibility:Select Enable to broadcast the SSID across the network,thus making it visible to all network users. Select Disableto hide the SSID rom wireless users.
Auto Channel Selection:Enabling this eature automatically selects the channel thatwill provide the best wireless perormance. This eature isnot supported in WDS mode.
Channel:All devices on the network must share the same channel. Tochange the channel, rst toggle the Auto Channel Selectionsetting to Disable, and then use the drop-down menu tomake the desired selection.
-
8/2/2019 DAP-3520 A1 Manual
20/80
D-Lnk DAP-3520 User Manual
Channel Width:Allows you to select the channel width you would like to operate in. Select 20.MHz i you are not using any 802.11n wireless clients orselect Auto.20/40.MHz.to use both 802.11n and non-802.11n wireless devices on your network.
Remote AP MAC Address:Enter the MAC addresses o the APs on your network that will serve as bridges to wirelessly connect multiple networks.
Site Survey:Site Survey will display available wireless networks. Click on the Scan button to search or available wireless networks, then click on theavailable network that you want to connect with.
Authentication:Use the drop-down menu to choose Open.System, Shared.Key, or WPA-Personal.
Select Open.System to communicate the key across the network.
Select Shared.Key to limit communication to only those devices that share the same WEP settings. I multi-SSID is enabled,this option is not available.
Select WPA-Personal. to secure your network using a password and dynamic key changes. No RADIUS server isrequired.
-
8/2/2019 DAP-3520 A1 Manual
21/80
D-Lnk DAP-3520 User Manual
Wireless Client Mode
Wireless Band:Select either 24GHz or 5GHz rom the drop-down menu.
Mode:Wireless. Client. mode is selected rom the drop-downmenu.
Network Name (SSID):Service Set Identier (SSID) is the name designated or aspecic wireless local area network (WLAN). The SSIDsactory deault setting is dlink. The SSID can be easilychanged to connect to an existing wireless network or toestablish a new wireless network.
SSID Visibility:This option is unavailable in wireless client mode.
Auto Channel Selection:Enabling this eature automatically selects the channel thatwill provide the best wireless perormance. This eature isnot supported in Wireless Client mode.
Channel:The channel will be determined by the access point that theDAP-3520 is connected to.
Channel Width:Allows you to select the channel width you would like tooperate in. Select 20.MHz i you are not using any 802.11nwireless clients. Auto.20/40.MHz.allows both 802.11n andnon-802.11n wireless devices on your network.
-
8/2/2019 DAP-3520 A1 Manual
22/80
D-Lnk DAP-3520 User Manual
Site Survey:Site Survey will display available wireless networks. Click on the Scan button to search or available wireless networks, then click on thename o the wireless network that you want to connect to.
Clone MAC Address:
Click Enable to allow you to clone a MAC address to the access point. I you select Auto rom the MAC Sourcedrop-down, it will copy therst MAC address ound in the LAN port.
Next to MAC.Address, enter the MAC address you would like to clone.
Authentication:Use the drop-down menu to choose Open.System or WPA-Personal.
Select Open.System to communicate the key across the network.
Select WPA-Personal. to secure your network using a password and dynamic key changes. No RADIUS server is
required.
-
8/2/2019 DAP-3520 A1 Manual
23/80
D-Lnk DAP-3520 User Manual
Site Survey:Site Survey will display available wireless networks. Click on the Scan button to search or available wireless networks, then click on thename o a wireless network that you want to connect to.
Clone MAC Address:
Click Enable to allow you to clone a MAC address to the access point. I you select Auto rom the MAC Sourcedrop-down, it will copy therst MAC address ound in the LAN port.
Next to MAC.Address, enter the MAC address you would like to clone.
Authentication:Use the drop-down menu to choose Open.System or WPA-Personal.
Select Open.System to communicate the key across the network.
Select WPA-Personal. to secure your network using a password and dynamic key changes. No RADIUS server isrequired.
-
8/2/2019 DAP-3520 A1 Manual
24/80
20D-Lnk DAP-3520 User Manual
WEP Encryption
*Hexadecimal (HEX)digits consist of the numbers 0-9 and the letters A-F.
**ASCII (American Standard Code for Information Interchange)is a code that represents English letters using numbers ranging from 0-127.
Authentication:Select either Open.System or Shared.Key.
Encryption:
Click to Enable or Disable Encryption.
Key Type:Select HEX* or ASCII**.
Key Size:Select 64-bit or 128-bit Encryption.
Key Index (1-4):Select the 1st.through the 4th key to be the active key.
Key:Input up to our keys.or encryption. You will select one o thesekeys in the Key Index drop-down menu.
Network Key:Enter the WEP encryption key.
Confrm Key:
Retype the network key.
-
8/2/2019 DAP-3520 A1 Manual
25/80
2D-Lnk DAP-3520 User Manual
WPA-Personal Authentication
WPA Mode:When WPA-Personal is selected or Authentication type, you must alsoselect a WPA mode rom the drop-down menu: AUTO.(WPA.or.WPA2),WPA2.Only, or WPA.Only. WPA and WPA2 use dierent algorithms.
AUTO.(WPA.or.WPA2) allows you to use both WPA and WPA2.
Cipher Type:When you select WPA-Personal, you must also select AUTO,.AES, orTKIP rom the drop-down menu.
Group Key Update Inverval:Select the interval during which the group key will be valid. The deaultvalue o 1800 is recommended.
PassPhrase:When you select WPA-Personal, please enter a PassPhrase. in thecorresponding eld.
Confrm PassPhrase:Retype the PassPhrase.in the corresponding eld.
-
8/2/2019 DAP-3520 A1 Manual
26/80
22D-Lnk DAP-3520 User Manual
WPA-Enterprise Authentication
WPA Mode:When WPA-Enterprise is selected, you must also select a WPA moderom the drop-down menu: AUTO.(WPA.or.WPA2), WPA2.Only, orWPA.Only. WPA and WPA2 use dierent algorithms. AUTO.(WPA.
or.WPA2) allows you to use both WPA and WPA2.
Cipher Type:When WPA-Enterprise is selected, you must also select a cipher typerom the drop-down menu: Auto, AES, or TKIP.
Group Key Update Inverval:Select the interval during which the group key will be valid. The deaultvalue o 1800 is recommended.
Network Access Protection:Enable or disable Microsot Network Access Protection.
RADIUS Server:Enter the IP address o the primary RADIUS server. You must alsocongure RADIUS port and RADIUS secret. In addition to a primaryRADIUS server, the AP allows you to set up an optional backupRADIUS server.
RADIUS Port:Enter the RADIUS port.
RADIUS Secret:Enter the RADIUS secret.
-
8/2/2019 DAP-3520 A1 Manual
27/80
23D-Lnk DAP-3520 User Manual
LAN
LAN is short or Local Area Network. This is considered your internal network. These are the IP settings o the LAN interace or theDAP-3520. These settings may be reerred to as private settings. You may change the LAN IP address i needed. The LAN IP address isprivate to your internal network and cannot be seen on the Internet.
Get IP From:Static.IP.(Manual) is chosen here. Choose this option i you do not have aDHCP server in your network, or i you wish to assign a static IP addressto the DAP-3520.
IP Address:The deault IP address is 192168050. Assign a static IP address that iswithin the IP address range o your network.
Subnet Mask:Enter the subnet mask. All devices in the network must share the samesubnet mask.
Deault Gateway:Enter the IP address o the gateway in your network.
Get IP From:Dynamic.IP.(DHCP) is chosen here. Choose this option i you have a DHCPserver in your network. When Dynamic is selected, the other elds herewill be grayed out. Please allow about two minutes or the DHCP client tobe unctional once this selection is made.
-
8/2/2019 DAP-3520 A1 Manual
28/80
2D-Lnk DAP-3520 User Manual
Advanced Settings
*Maximum wireless signal rate derived rom IEEE Standard 802.11 specications. Actual data throughput may vary. Network conditions and environmental actors, including volume o network trac, building
materials and construction, and network overhead can lower actual data throughout rate.
Wireless:Use the drop-down menu to turn the wireless unction On or Off.
Wireless Mode:The dierent combination o clients that can be supported includeMixed.80211n,.80211g.and.80211b,.Mixed.80211g.and.80211b.in the 2.4 GHz band and.Mixed.80211n,.80211a and 80211a.only.in the 5 GHz band. Please note that when backwards compatibilityis enabled or legacy (802.11a/g/b) clients, degradation o 802.11nwireless perormance is expected.
Data Rate*:
Indicate the base transer rate o wireless adapters on the wirelessLAN. The AP will adjust the base transer rate depending on the baserate o the connected device. I there are obstacles or intererence, theAP will step down the rate. This option is enabled in Mixed.80211g.and.80211b mode (or 2.4 GHz) and 80211a.only mode (or 5 GHz).The choices available are Best.(Up.to.54), 54, 48, 36, 24, 18, 12,9, 6 or 5 GHz and Best.(Up.to.54), 54, 48, 36, 24, 18, 12, 9, 6,.1111,55, 2.or 1.or 2.4 GHz.
Beacon Interval (25-500):
Beacons are packets sent by an access point to synchronize a wireless network. Speciy a value in milliseconds. The deault ( 100) isrecommended. Setting a higher beacon interval can help to save the power o wireless clients, while setting a lower one can help a wirelessclient connect to an access point aster.
DTIM Interval (1-15):Select a Delivery Trafc Indication Message setting between 1 and 15. The deault setting is 1. DTIM is a countdown inorming clients o thenext window or listening to broadcast and multicast messages.
Perormance
-
8/2/2019 DAP-3520 A1 Manual
29/80
25D-Lnk DAP-3520 User Manual
Transmit Power:
This setting determines the power level o the wireless transmission. Transmitting power can be adjusted to eliminate overlapping o wirelessarea coverage between two access points where intererence is a major concern. For example, i wireless coverage is intended or hal othe area, then select 50% as the option. Use the drop-down menu to select 100%, 50%, 25%, or.125%.
WMM (Wi-Fi Multimedia):
WMM stands or Wi-Fi Multimedia. Enabling this eature will improve the user experience or audio and video applications over a Wi-Finetwork.
Ack Time Out (2.4 GHz, 64~200) or Ack Time Out (5 GHz, 50~200):To eectively optimize throughput over long distance links enter a value or Acknowledgement Time Out between 50 and 200 microsecondsor 5 GHz or rom 64 to 200 microseconds in the 2.4 GHz in the eld provided.
Short GI:Select Enable or Disable. Enabling a short guard interval can increase throughput. However, be aware that it can also increase the errorrate in some installations due to increased sensitivity to radio-requency installations.
IGMP Snooping:Select Enable or Disable. Internet Group Management Protocol allows the AP to recognize IGMP queries and reports sent betweenrouters and an IGMP host (wireless STA). When IGMP snooping is enabled, the AP will orward multicast packets to an IGMP host basedon IGMP messages passing through the AP.
Connection Limit:Select Enable or Disable. This is an option or load balancing. This determines whether to limit the number o users accessing thisdevice. The exact number is entered in the User Limit eld below. This eature allows the user to share the wireless network trac and theclient using multiple APs. I this unction is enabled, when the number o users exceeds this value, the DAP-3520 will not allow clients to
associate with the AP.
User Limit (0 - 64):Set the maximum amount o users that are allowed access (0-64 users).To use this eature, the Connection Limit above must be enabled.For most users, a limit o 10 is recommended. The deault setting is 20.
-
8/2/2019 DAP-3520 A1 Manual
30/80
2D-Lnk DAP-3520 User Manual
Multi-SSID
The device supports up to our multiple Service Set Identiers. You can set the Primary SSID in the Basic > Wireless section. The SSIDsactory deault setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wirelessnetwork.
Enable Multi-SSID:Check to enable support or multiple SSIDs.
Band:Displays the current band.
Index:You can select up to three multi-SSIDs. With the Primary SSID,you have a total o our multi-SSIDs.
SSID:Service Set Identier (SSID) is the name designated or a specicwireless local area network (WLAN). The SSIDs actory deaultsetting is dlink. The SSID can be easily changed to connectto an existing wireless network or to establish a new wirelessnetwork.
SSID Visibility:Select Enable to broadcast the SSID across the network, thus
making it visible to all network users. Select Disable to hide theSSID rom wireless users.
Security:The Multi-SSID security can be Open.System, Shared.Key,WPA-Personal, or WPA-Enterprise. For a detailed description othe Open System parameters, please go to page 26. For a detaileddescription o the WPA-Personal parameters please go to page27. For a detailed description o the WPA-Enterprise parameters,please go to pages 28-29.
-
8/2/2019 DAP-3520 A1 Manual
31/80
-
8/2/2019 DAP-3520 A1 Manual
32/80
2D-Lnk DAP-3520 User Manual
PassPhrase:When you select WPA-Personal, please enter a PassPhrase.in the corresponding eld.
Confrm PassPhrase:When you select WPA-Personal, please re-enter the PassPhrase.entered in the previous item.in the corresponding eld.
RADIUS Server:When you select WPA-Enterprise, enter the IP address o the primary RADIUS server. You must also congure RADIUS port and RADIUSsecret. In addition to a primary RADIUS server, the AP allows you to set up an optional backup RADIUS server.
RADIUS Port:Enter the RADIUS port.
RADIUS Secret:Enter the RADIUS secret.
-
8/2/2019 DAP-3520 A1 Manual
33/80
2D-Lnk DAP-3520 User Manual
VLAN
The DAP-3520 supports VLANs. VLANs can be created with a Name and VID. Mgmt (TCP stack), LAN, Primary/Multiple SSID, and WDSconnection can be assigned to VLANs as they are physical ports. Any packet which enters the DAP-3520 without a VLAN tag will have aVLAN tag inserted with a PVID. The VLAN List tab displays the current VLANs.
VLAN Status:Use the radio button to toggle to Enable. Next, go to theAdd/Edit.VLAN tab to add or modiy an item on the VLAN.List tab.
-
8/2/2019 DAP-3520 A1 Manual
34/80
30D-Lnk DAP-3520 User Manual
Port List
The Port List tab displays the current ports. I you want to congure the guest and internal networks on a Virtual LAN (VLAN), the switchand DHCP server you are using must also support VLANs. As a prerequisite step, congure a port on the switch or handling VLAN taggedpackets as described in the IEEE 802.1Q standard.
VLAN Status:Use the radio button to toggle to Enable. Next, go to theAdd/Edit.VLAN tab to add or modiy an item on the VLAN.List tab.
Port Name:The name o the port is displayed in this column.
Tag VID:
The Tagged VID is displayed in this column.
Untag VID:The Untagged VID is displayed in this column.
PVID:The Port VLAN Identier is displayed in this column.
-
8/2/2019 DAP-3520 A1 Manual
35/80
3D-Lnk DAP-3520 User Manual
Add/Edit VLAN
The Add/Edit VLAN tab is used to congure VLANs. Once you have made the desired changes, click the Apply button to let your changestake eect.
VLAN Status:Use the radio button to toggle to Enable.
VLAN ID (VID):Provide a number between 1 and 4094 or the InternalVLAN.
VLAN Name:Enter the VLAN to add or modiy.
-
8/2/2019 DAP-3520 A1 Manual
36/80
32D-Lnk DAP-3520 User Manual
PVID Setting
The PVID Setting tab is used to enable/disable the Port VLAN Identier Auto Assign Status as well as to congure various types o PVIDsettings. Click the Apply.button to let your changes take eect.
VLAN Status:Use the radio button to toggle to Enable.
PVID Auto Assign Status:Use the radio button to toggle PVID auto assign status to Enable.
-
8/2/2019 DAP-3520 A1 Manual
37/80
33D-Lnk DAP-3520 User Manual
Intrusion
AP List:The choices include All, Valid, Neighbor, Rogue, andNew..
Detect:Click this button to initiate a scan o the network. .
The Wireless Intrusion Protection window is used to set APs as All, Valid, Neighborhood, Rogue, and New. Click the Apply.button tolet your changes take eect.
-
8/2/2019 DAP-3520 A1 Manual
38/80
3D-Lnk DAP-3520 User Manual
Schedule
The Wireless Schedule Settings window is used to add and modiy scheduling rules on the device. Click the Apply.button to let yourchanges take eect.
Wireless Schedule:Select Enable or Disable rom the drop-down menu..
Name:Enter a name or your schedule rule.
Day(s):Select All.Week or Select. Days(s). I Select. Day(s) isselected, check the specic days you want the rule to beeective on.
All Days(s):Check this box to select all days.
Start Time:Enter the start time or the rule.
End Time:Enter the end time or the rule.
Wireless:Select O and On.
-
8/2/2019 DAP-3520 A1 Manual
39/80
35D-Lnk DAP-3520 User Manual
QoS
QoS (Quality o Service):Enable this option i you want to allow QoS to prioritize yourtrac Priority Classiers..
HTTP:
Allows the access point to recognize HTTP transers or manycommon audio and video streams and prioritize them aboveother trac. Such streams are requently used by digital mediaplayers.
Automatic:When enabled, this option causes the access point toautomatically attempt to prioritize trac streams that it does nototherwise recognize, based on the behavior that the streamsexhibit. This acts to de-prioritize streams that exhibit bulk transer
characteristics, such as le transers, while leaving interactivetrac, such as gaming or VoIP, running at a normal prior ity.
Name:Enter a name or the new QoS rule in the eld provided.
Priority:Use the drop-down menu to select the desired priority:Background. (BK), Best. Eort.(BE), Video.(VI), or Voice.(VO).
Quality o Service (QoS) enhances the experience o using a network by prioritizing the trac o dierent applications.
A QoS Rule identies a specic message fow and assigns a priority to that fow. For most applications, the priority classiers ensure theright priorities and specic QoS Rules are not required.
QoS supports overlaps between rules. I more than one rule matches a specic message fow, the rule with the highest priority will beused.
-
8/2/2019 DAP-3520 A1 Manual
40/80
3D-Lnk DAP-3520 User Manual
Protocol:Use the drop-down menu to choose the appropriate protocol used by the messages: Any, TCP, UDP, Both, IMCP, or Other.
Host 1 IP Range:The rule applies to a fow o messages or which one computers IP address alls within the range set here.
Host 1 Port Range:The rule applies to a fow o messages or which host 1s port number is within the range set here when the Protocol is set to TCP, UDP,or Both.
Host 2 IP Range:The rule applies to a fow o messages or which the other computers IP address alls within the range set here.
Host 2 Port Range:The rule applies to a fow o messages or which host 2s port number is within the range set here when the Protocol is set to TCP, UDP,or Both.
-
8/2/2019 DAP-3520 A1 Manual
41/80
3D-Lnk DAP-3520 User Manual
Dynamic Pool Settings
Function Enable/Disable:Dynamic Host Conguration Protocol (DHCP) assignsdynamic IP addresses to devices on the network. Thisprotocol simplies network management and allows newwireless devices to receive IP addresses automaticallywithout the need to manually assign new IP addresses.Select Enable to allow the DAP-3520 to unction as a
DHCP server.
IP Assigned From:Input the rst IP address available or assignment onyour network.
The Range o Pool (1-254):Enter the number o IP addresses available or assignment.IP addresses are increments o the IP address speciedin the IP Assigned From eld.
Subnet Mask:
All devices in the network must have the same subnetmask to communicate. Enter the submask or the networkhere.
The DHCP address pool denes the range o the IP address that can be assigned to stations in the network. A Dynamic Pool allows
wireless stations to receive an available IP with lease time control.
DHCP Server
-
8/2/2019 DAP-3520 A1 Manual
42/80
3D-Lnk DAP-3520 User Manual
Gateway:Enter the IP address o the gateway on the network.
WINS:Speciy the Windows Internet Naming Service (WINS) server address or the wireless network. WINS is a system that determines the IP
address o a network computer that has a dynamically assigned IP address.
DNS:Enter the IP address o the Domain Name System (DNS) server. The DNS server translates domain names such as www.dlink.com intoIP addresses.
Domain Name:Enter the domain name o the network, i applicable. (An example o a domain name is: www.dlink.com.)
Lease Time (60-31536000 sec):
The lease time is the period o time beore the DHCP server will assign new IP addresses.
-
8/2/2019 DAP-3520 A1 Manual
43/80
3D-Lnk DAP-3520 User Manual
Static Pool Setting
Function Enable/Disable:
Dynamic Host Conguration Protocol (DHCP) assignsIP addresses to wireless devices on the network.This protocol simplies network management andallows new wireless devices to receive IP addressesautomatically without the need to manually assign IPaddresses. Select Enable to allow the DAP-3520 tounction as a DHCP server.
Host Name:Enter a name or the assigned client.
Assigned IP:Use the Static Pool Settings to assign the same IPaddress to a device every time you start up. The IPaddresses assigned in the Static Pool list must NOTbe in the same IP range as the Dynamic Pool. Ateryou have assigned a static IP address to a device viaits MAC address, click Apply; the device will appear inthe Assigned Static Pool at the bottom o the screen.You can edit or delete the device in this list.
Assigned MAC Address:Enter the MAC address o the device requestingassociation here.
Subnet Mask:Dene the submask o the IP address specied in theIP Assigned From eld.
Gateway:Speciy the Gateway address or the wirelessnetwork.
The DHCP address pool denes the range o IP addresses that can be assigned to stations on the network. A static pool allows specicwireless stations to receive a xed IP without time control.
-
8/2/2019 DAP-3520 A1 Manual
44/80
0D-Lnk DAP-3520 User Manual
WINS:Speciy the Windows Internet Naming Service (WINS) server address or the wireless network. WINSINS.is a system that determines the IPaddress o a network computer with a dynamically assigned IP address, i applicable.
DNS:
Enter the Domain Name System (DNS) server address or the wireless network. The DNS server translates domain names such aswww.dlink.com into IP addresses.
Domain Name:Speciy the domain name or the network.
-
8/2/2019 DAP-3520 A1 Manual
45/80
D-Lnk DAP-3520 User Manual
Current IP Mapping List
This window displays inormation about the current assigned DHCP dynamic and static IP address pools. This inormation is availablewhen you enable DHCP server on the AP and assign dynamic and static IP address pools.
Current DHCP Dynamic Pools:These are IP address pools the DHCP server has assignedusing the dynamic pool setting..
Host Name:The host name o the client.
Binding MAC Address:The MAC address o a device on the network that is assignedan IP address rom the DHCP dynamic pool.
Assigned IP Address:The current corresponding DHCP-assigned IP address o thedevice.
Lease Time:The length o time that the dynamic IP address will be valid.
Current DHCP Static Pools:These are the IP address pools o the DHCP server assignedthrough the static pool settings.
Host Name:The host name o the client.
Binding MAC Address:The MAC address o a device on the network that is within theDHCP static IP address pool.
Assigned IP Address:The current corresponding DHCP-assigned static IP addresso the device.
-
8/2/2019 DAP-3520 A1 Manual
46/80
2D-Lnk DAP-3520 User Manual
Filters
Wireless Band:
Displays the current wireless band rate.
Access Control List:Select Disable.to disable the lters unction.
Select Accept to accept only those devices with MACaddresses in the Access Control List. All other devices noton the list will be rejected.
Select Reject.to reject the devices with MAC addresses
on the Access Control List. All other devices not on the listwill be accepted.
MAC Address:Enter each MAC address that you wish to include in yourlter list, and click Apply.
MAC Address List:When you enter a MAC address, it appears in this list.Highlight a MAC address and click Delete to remove it
rom this list.
Wireless MAC ACL
-
8/2/2019 DAP-3520 A1 Manual
47/80
3D-Lnk DAP-3520 User Manual
WLAN Partition
Wireless Band:Displays the current wireless band rate.
Link Integrity:
Select Enable or Disable.
Ethernet to WLAN Access:The deault is Enable. When disabled, all data rom the Ethernet toassociated wireless devices will be blocked. Wireless devices can stillsend data to the Ethernet.
Internal Station Connection:The deault value is Enable, which allows stations to inter-communicateby connecting to a target AP. When disabled, wireless stations cannot
exchange data through the AP.
Guest mode is or creating a hotspot. Clients connecting to this SSIDwill not be able to see other wireless devices on this wireless network.They will only be able to network to devices connected via the Ethernetport on the DAP-3520.
-
8/2/2019 DAP-3520 A1 Manual
48/80
D-Lnk DAP-3520 User Manual
Status
Device Inormation:
This read-only window displays the coniguration settingso the DAP-3520, including the irmware version and thedevice's MAC address.
Device Inormation
-
8/2/2019 DAP-3520 A1 Manual
49/80
5D-Lnk DAP-3520 User Manual
Client Inormation
Client Inormation:
This window displays the wireless client inormation orclients currently connected to the DAP-3520.
The ollowing inormation is available or each clientcommunicating with the DAP-3520.
SSID:
Displays the SSID o the client.
MAC:
Displays the MAC address o the client.
Band:Displays the wireless band that the client is connected to.
Authentication:
Displays the type o authentication being used.
Signal:
Displays the client's signal strength.
Power Saving Mode:
Displays the status o the power saving eature.
-
8/2/2019 DAP-3520 A1 Manual
50/80
D-Lnk DAP-3520 User Manual
WDS Inormation
WDS Inormation:This window displays the Wireless DistributionSystem inormation or clients currently connectedto the DAP-3520.
The ollowing inormation is available or eachclient communicating with the DAP-3520.
Name:Displays the name o the client.
MAC:Displays the MAC address o the client.
Authentication:Displays the type o authentication being used.
Signal:Displays the WDS link signal strength.
Status:Displays the status o the power saving eature.
-
8/2/2019 DAP-3520 A1 Manual
51/80
D-Lnk DAP-3520 User Manual
Stats
Ethernet Trafc Statistics:
This page displays transmitted and receivedcount statistics or packets and bytes.
Ethernet
-
8/2/2019 DAP-3520 A1 Manual
52/80
D-Lnk DAP-3520 User Manual
WLAN
WLAN Trafc Statistics:This page displays wireless network statisticsor data throughput, transmitted and receivedrames, and rame errors.
-
8/2/2019 DAP-3520 A1 Manual
53/80
D-Lnk DAP-3520 User Manual
View Log:
The APs embedded memory displays system and networkmessages including a time stamp and message type. Thelog inormation includes but is not limited to the ollowingitems: cold start AP, upgrading rmware, client associateand disassociate with AP, and web login. The web pageholds up to 500 logs.
Log
View Log
-
8/2/2019 DAP-3520 A1 Manual
54/80
50D-Lnk DAP-3520 User Manual
Log Settings
Log Server/IP Address:Enter the IP address o the server you would like to send theDAP-3520 log to.
Log Type:Check the box or the type o activity you want to log. There arethree types: System Activity, Wireless Activity, and Notice.
Email Notifcation:Click to Enable email notication.
From Email Address:Enter the senders e-mail address. This eld does not requirea valid e-mail address. However, i your e-mail client is ltering
spam, make sure you allow this address to be received.
To Email Address:Enter the e-mail address you want to send alerts to. This addressmust correspond with the SMTP server congured above.
Email Server Address:Enter the IP address o the server you would like to send theDAP-3520 log to.
SMTP Port:Enter a TCP port number to relay outbound mail to your mailserver. The deault port is 25.
-
8/2/2019 DAP-3520 A1 Manual
55/80
5D-Lnk DAP-3520 User Manual
User Name:Enter an appropriate user name or your e-mail account.
Password:Enter an appropriate password or your e-mail account.
Confrm Password:
Retype the password or your e-mail account.
Schedule:Use the drop-down menu to select the number o hours beore mail will be sent to the server. For example, i a value o 2 is selected, mailwill be sent to the server every two hours. However, i the log entry is ull between 0 and 2 hours, mail will also be sent to the server andthen the log entry will be automatically cleared.
-
8/2/2019 DAP-3520 A1 Manual
56/80
52D-Lnk DAP-3520 User Manual
Administrator Settings
Check one or more o the six main categories
to display the various hidden administratorparameters and settings displayed on the nextve pages.
Maintenance
-
8/2/2019 DAP-3520 A1 Manual
57/80
53D-Lnk DAP-3520 User Manual
Limit Administrator
Limit Administrator VLAN ID:Check the box provided and then enter the specic VLANID that the administrator will be allowed to log in rom.
Limit Administrator IP:Check to enable the Limit Administrator IP address.
IP Range:Enter the IP address range that the administrator will beallowed to log in rom and then click the Add button.
-
8/2/2019 DAP-3520 A1 Manual
58/80
5D-Lnk DAP-3520 User Manual
System Name Settings:Each o the six main categories display varioushidden administrator parameters and settings.
System Name:The name o the device. The deault name isD-Link.DAP-3520.
Location:The physical location o the device, e.g. oce.
System Name Settings
-
8/2/2019 DAP-3520 A1 Manual
59/80
55D-Lnk DAP-3520 User Manual
Login Settings
Each o the six main categories display various hiddenadministrator parameters and settings.
User Name:
Enter a user name. The deault is admin.
Old Password:When changing your password, enter the old passwordhere.
New Password:When changing your password, enter the new passwordhere. The password is case-sensitive. A is a dierentcharacter than a. The length should be between 0 and
12 characters.
Confrm Password:Enter the new password a second time or conrmationpurposes.
-
8/2/2019 DAP-3520 A1 Manual
60/80
5D-Lnk DAP-3520 User Manual
Console Settings
Each o the six main categories display various hiddenadministrator parameters and settings.
Status:
Status is enabled by deault. Uncheck the box to disable theconsole.
Console Protocol:Select the type o protocol you would like to use, Telnet or.SSH.
Timeout:Set to 1.Min, 3.Mins, 5.Mins, 10.Mins, 15.Mins or Never.
SNMP S i
-
8/2/2019 DAP-3520 A1 Manual
61/80
5D-Lnk DAP-3520 User Manual
SNMP Settings
Each o the six main categories display various hiddenadministrator parameters and settings.
Status:
Check the box to enable the SNMP unctions. This is enabled bydeault.
Public Community String:Enter the public SNMP community string.
Private Community String:Enter the private SNMP community string.
Pi C t l S tti
-
8/2/2019 DAP-3520 A1 Manual
62/80
5D-Lnk DAP-3520 User Manual
Ping Control Setting
Each o the six main categories display various hiddenadministrator parameters and settings.
Status:
Check the box to enable Ping control.
Fi d SSL C tif ti U l d
-
8/2/2019 DAP-3520 A1 Manual
63/80
5D-Lnk DAP-3520 User Manual
Firmware and SSL Certifcation Upload
Upload Firmware From Local Hard Drive:The current rmware version is displayed above the le locationeld. Ater downloading the most recent version o rmware or theDAP-3520 rom http://support.dlink.com to your local
computer, use the Browse button to locate the rmware le onyour computer. Click Upload to update the rmware version.Please do not turn the power o while upgrading.
Upload SSL Certifcation From Local Hard Drive:Click Browse to locate the SSL Certication le on your localcomputer. Ater selecting and opening the le, click Uploadto upload the le to the DAP-3520.
C f ti Fil
-
8/2/2019 DAP-3520 A1 Manual
64/80
0D-Lnk DAP-3520 User Manual
Confguration File
Upload File:Click the Browse button to locate a previously savedconguration le on your local computer. Ater selecting thele, click Upload to apply the conguration settings to the
DAP-3520.
Download Confguration File:Click Download to save the current DAP-3520 congurationto your local computer.
Note that i you save one conguration with the administratorspassword now, ater resetting your DAP-3520, and thenupdating to this saved conguration le, the password willbe gone.
Ti d D t
-
8/2/2019 DAP-3520 A1 Manual
65/80
D-Lnk DAP-3520 User Manual
Time and Date
Current Time:Displays the current time and date settings.
Time Zone:
Use the drop-down menu to select your correct. TimeZone.
Enable Daylight Saving:Check the box to Enable Daylight Saving Time.
Daylight Saving Oset:Use the drop-down menu to select the correct DaylightSaving oset.
Daylight Saving Dates:Use the drop-down menu to select the correct DaylightSaving oset.
Enable NTP Server:Check to enable the AP to get system time rom an NTPserver.
NTP Server:Enter the NTP server IP address.
Set the Date and Time Manually:You can either manually set the time or your AP here, oryou can click the Copy.Your.Computers.Time.Settings button to copy the time rom the computer you are using(Make sure that the computers time is set correctly).
S t
-
8/2/2019 DAP-3520 A1 Manual
66/80
2D-Lnk DAP-3520 User Manual
System
Restart the Device:Click Restart to restart the DAP-3520.
Restore to Factory Deault Settings:Click Restore to restore the DAP-3520 back to actorydeault settings.
System Settings
Help
-
8/2/2019 DAP-3520 A1 Manual
67/80
3D-Lnk DAP-3520 User Manual
Help
Help:Scroll down the Help page or topics andexplanations.
T bl h ti
-
8/2/2019 DAP-3520 A1 Manual
68/80
D-Lnk DAP-3520 User Manual
TroubleshootingThis chapter provides solutions to problems that can occur during the installation and operation o the DAP-3520 Wireless Access Point. Wewill cover various aspects o the network setup, especially the network adapters. Please read the ollowing i you are having any technicaldiculties.
Note: It is recommended that you use an Ethernet connection to congure the DAP-3520 .
1.The.computer.used.to.confgure.the.DAP-3520.cannot.access.the.Confguration.menu
Check i the LAN LED on the DAP-3520 is ON. I the .LED is not ON, check i the cable or the Ethernet connection is securelyinserted.
Check i the Ethernet adapter is working properly. Please see item 3 o this Troubleshooting section to check that the drivers or thenetwork adapters are loaded properly.
Check i the IP address is in the same range and subnet as the DAP-3520.
Note: The deault IP address o the DAP-3520 is 192.168.0.50. All the computers on the network must have a unique IP address in thesame range, e.g. 192.168.0.x. Any computers that have identical IP addresses will not be visible on the network. They must all have thesame subnet mask, e.g. 255.255.255.0.
Do a Ping test.to make sure that the DAP-3520 is responding. Go to.Start>Run>Type Command>Type ping.192168050.Asuccessul ping will show our replies.
Note: I you have changed the deault IP address, make sure to ping the correct IP address assigned to the DAP-3520.
2 The wireless client cannot access the Internet within Inrastructure mode
-
8/2/2019 DAP-3520 A1 Manual
69/80
5D-Lnk DAP-3520 User Manual
2.The.wireless.client.cannot.access.the.Internet.within.Inrastructure.mode
Make sure the wireless client is associated and joined with the correct access point. To check this connection, r ight-click on the Local.Area.Connection.icon in the taskbar and select View.Available.Wireless Networks The Connect.to.Wireless.Networkscreen will appear.Please make sure you have selected the correct available network, as shown in the illustrations below.
Check that the.IP address assigned to the wireless adapter is within the same IP address range.as the access point and gateway. Sincethe DAP-3520 has an IP address o 192.168.0.50, wireless adapters must have an IP address in the same range, e.g. 192.168.0.x. Eachdevice must have a unique IP address; there may be no two devices with the same IP address. The subnet mask must be the same orall the computers on the network. To check the.IP address.assigned to the wireless adapter, double-click the Local.Area.Connection.icon in the taskbar, then select the Support.tab and the IP address will be displayed.
I it is necessary to assign a Static IP Address to the wireless adapter. I you are entering a DNS Server address, .you must also enterthe Deault Gateway Address. Remember that if you have a DHCP-capable router, you will not need to assign a static IP address.
3 What variables may cause my wireless products to lose reception?
-
8/2/2019 DAP-3520 A1 Manual
70/80
D-Lnk DAP-3520 User Manual
3.What.variables.may.cause.my.wireless.products.to.lose.reception?
D-Link products let you access your network rom virtually anywhere you want, however, the positioning o the products within yourenvironment will aect its wireless range.
4.Why.does.my.wireless.connection.keep.dropping?
Antenna Orientation - try dierent antenna orientations or the DAP-3520. Try to keep the antenna at least 6 inches away rom the wallor other objects.
I you are using 2.4GHz cordless phones, X-10 equipment or other home security systems, ceiling ans, or lights, your wireless connectionwill degrade dramatically or even drop. Try changing the channel o your router, access point and wireless adapter to a dierent channelto avoid intererence.
Keep your product away - at least 3-6 eet - rom electrical devices that generate RF noise like microwaves, monitors, electric motors,etc.
5.Why.cant.I.get.a.wireless.connection?
I you have enabled encryption on the DAP-3520, you must also enable encryption on all wireless clients in order to establish a wirelessconnection.
Make sure that the SSID on the AP and the wireless client are exactly the same. I they are not, wireless connection cannot beestablished.
Move the DAP-3520 and the wireless client into the same room and then test the wireless connection.
Disable all security settings.
Turn o your DAP-3520 and the client. Turn the DAP-3520 back on again, and then turn on the client.
Check that the LED indicators are indicating normal activity. I not, check that the AC power and Ethernet cables are rmlyconnected.
Check that the IP address, subnet mask, gateway, and DNS settings are correctly entered or the network.
I you are using 2.4 GHz cordless phones, X-10 equipment, or other home security systems, ceiling ans, or lights, your wirelessconnection will degrade dramatically or drop altogether. Try changing the channel on your DAP-3520, and on all the devices in yournetwork to avoid intererence.
Keep your product away - at least 3-6 eet - rom electrical devices that generate RF noise like microwaves, monitors, electric motors,
etc.
Technical Specifcations
-
8/2/2019 DAP-3520 A1 Manual
71/80
D-Lnk DAP-3520 User Manual
Technical Specifcations
*Maximum wireless signal rate derived rom IEEE Standard 802.11 specications. Actual data throughput may vary. Network conditions and environmental actors, including volume o network trac, buildingmaterials and construction, and network overhead can lower actual data throughout rate.
**Please note that operating requency ranges vary depending on the regulations o individual countries and jurisdictions. The DAP-3520 is not supported in the 5.25~5.35GHz and 5.47 ~ 5.725GHz requencyranges in some regions.
Standards IEEE 802.11a IEEE 802.11b IEEE 802.11g IEEE 802.11n
IEEE 802.3 IEEE 802.3u IEEE 802.3ab IEEE 802.3a
Network.Management Web Browser interace
HTTPSecure HTTP (HTTPS)
AP Manager II SNMP Support
D-View Module
Private MIB Command Line Interace
TelnetSecure SSH Telnet
Data.Rates*For 802.11a:
54, 48, 36, 24, 18, 12, 9, and 6 MbpsFor 802.11b:
11, 5.5, 2, and 1 MbpsFor 802.11g:
54, 48, 36, 24, 18, 12, 9, and 6 MbpsFor 802.11n (drat): HT20/HT40 144.4/300, 130/270, 117/243, 104/216, 78/162, 66/135, 58.5/121.5,
52/108, 39/81, 26/54, 19.5/40.5, 12/27, and 6.5/13.5 Mbps
Security
WPA Personal/Enterprise WPA2 Personal/Enterprise WEP 64 / 128 bit SSID Broadcast Disable
MAC Address Access Control
Operating.Modes Access Point (AP) WDS with AP WDS Wireless Client
LAN.Port.Speed 10/100/1000 Mbps
Wireless.Frequency.Range**For 802.11a:
5.15 ~ 5.85GHzFor 802.11b/g:
2.4 ~ 2.4835GHzFor 802.11n:
2.4GHz Band: 2.4 ~ 2.4835GHz 5GHz Band: 5.15 ~ 5.85GHz
Operating.Voltage. PoE 48VDC +/-10%
Maximum.Power.Consumption 12.95 Watts
-
8/2/2019 DAP-3520 A1 Manual
72/80
D-Lnk DAP-3520 User Manual
Radio.and.Modulation.TypeFor 802.11a/g/n:
BPSK, QPSK, 16QAM, and 64QAM with OFDMFor 802.11b:
DQPSK, DBPSK, DSSS, and CCK
Embedded.Directional.Antenna.Peak.Gain 8dBi Gain @2.4GHz 10dBi Gain @5GHz
Maximum.Transmit.Output.Power
.17 dBm@ 2.4 GHz 16 dBm @5 GHz
Maximum.Eective.Isotropic.Radiated.Power.(EIRP).28dBm @ 2.4 GHz 29dBm @5 GHz
LEDs
Power LAN WLAN
Temperature Operating: -20C to 60C Storing: -20C to 65C
Humidity Operating: 10%~90% (non-condensing) Storing: 5%~95% (non-condensing)
Certifcations
FCC Class B CE UL 60950 IC C-Tick CSA Wi-Fi
Ingress.Protection.Rating.IP65
Weight..1.58 lbs (717g)
Dimensions L = 198 mm W = 163 mm H = 58 mm
Warranty
-
8/2/2019 DAP-3520 A1 Manual
73/80
D-Lnk DAP-3520 User Manual
WarrantySubject to the terms and conditions set orth herein, D-Link Systems, Inc. (D-Link) provides this Limited Warranty:
Only to the person or entity that originally purchased the product rom D-Link or its authorized reseller or distributor, andOnly or products purchased and delivered within the ty states o the United States, the District o Columbia, U.S. Possessions or
Protectorates, U.S. Military Installations, or addresses with an APO or FPO.
Limited.Warranty:D-Link warrants that the hardware portion o the D-Link product described below (Hardware) will be ree rom material deects inworkmanship and materials under normal use rom the date o original retail purchase o the product, or the period set orth below(Warranty Period), except as otherwise stated herein.
Hardware (excluding power supplies and ans): One (1) year Power supplies and ans: One (1) year Spare parts and spare kits: Ninety (90) days
The customers sole and exclusive remedy and the entire liability o D-Link and its suppliers under this Limited Warranty will be, atD-Links option, to repair or replace the deective Hardware during the Warranty Period at no charge to the original owner or to reund theactual purchase price paid. Any repair or replacement will be rendered by D-Link at an Authorized D-Link Service Oce. The replacementhardware need not be new or have an identical make, model or part. D-Link may, at its option, replace the deective Hardware or any partthereo with any reconditioned product that D-Link reasonably determines is substantially equivalent (or superior) in all material respectsto the deective Hardware. Repaired or replacement hardware will be warranted or the remainder o the original Warranty Period or ninety(90) days, whichever is longer, and is subject to the same limitations and exclusions. I a material deect is incapable o correction, or iD-Link determines that it is not practical to repair or replace the deective Hardware, the actual price paid by the original purchaser or the
deective Hardware will be reunded by D-Link upon return to D-Link o the deective Hardware. All Hardware or part thereo that is replacedby D-Link, or or which the purchase price is reunded, shall become the property o D-Link upon replacement or reund.
Limited.Sotware.Warranty:D-Link warrants that the sotware portion o the product (Sotware) will substantially conorm to D-Links then current unctional specicationsor the Sotware, as set orth in the applicable documentation, rom the date o original retail purchase o the Sotware or a period oninety (90) days (Sotware Warranty Period), provided that the Sotware is properly installed on approved hardware and operated ascontemplated in its documentation.
D-Link urther warrants that, during the Sotware Warranty Period, the magnetic media on which D-Link delivers the Sotware will be
-
8/2/2019 DAP-3520 A1 Manual
74/80
0D-Lnk DAP-3520 User Manual
g y gree o physical deects. The customers sole and exclusive remedy and the entire liability o D-Link and its suppliers under this LimitedWarranty will be, at D-Links option, to replace the non-conorming Sotware (or deective media) with sotware that substantially conorms toD-Links unctional specications or the Sotware or to reund the portion o the actual purchase price paid that is attributable to the Sotware.Except as otherwise agreed by DLink in writing, the replacement Sotware is provided only to the original licensee, and is subject to theterms and conditions o the license granted by D-Link or the Sotware. Replacement Sotware will be warranted or the remainder o theoriginal Warranty Period and is subject to the same limitations and exclusions. I a material non-conormance is incapable o correction,
or i D-Link determines in its sole discretion that it is not practical to replace the non-conorming Sotware, the price paid by the originallicensee or the non-conorming Sotware will be reunded by D-Link; provided that the non-conorming Sotware (and all copies thereo)is rst returned to D-Link. The license granted respecting any Sotware or which a reund is given automatically terminates.
Non-Applicability.o.Warranty:The Limited Warranty provided hereunder or Hardware and Sotware portions o D-Links products will not be applied to and does not coverany reurbished product and any product purchased through the inventory clearance or liquidation sale or other sales in which D-Link, thesellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product and in that case, the product is being soldAs-Is without any warranty whatsoever including, without limitation, the Limited Warranty as described herein, notwithstanding anythingstated herein to the contrary.
Submitting A Claim:The customer shall return the product to the original purchase point based on its return policy. In case the return policy period has expiredand the product is within warranty, the customer shall submit a claim to D-Link as outlined below:
The customer must submit with the product as part o the claim a written description o the Hardware deect or Sotwarenonconormance in sucient detail to allow DLink to conrm the same, along with proo o purchase o the product (such
as a copy o the dated purchase invoice or the product) i the product is not registered.
The customer must obtain a Case ID Number rom D-Link Technical Support at 1-877-354-6555, who will attempt to assistthe customer in resolving any suspected deects with the product. I the product is considered deective, the customer mustobtain a Return Material Authorization (RMA) number by completing the RMA orm and entering the assigned Case IDNumber at https://rma.dlink.com/.
Ater an RMA number is issued, the deective product must be packaged securely in the original or other suitable shippingpackage to ensure that it will not be damaged in transit, and the RMA number must be prominently marked on the outsideo the package. Do not include any manuals or accessories in the shipping package. DLink will only replace the deectiveportion o the product and will not ship back any accessories.
The customer is responsible or all in-bound shipping charges to D-Link. No Cash on Delivery (COD) is allowed. Products
-
8/2/2019 DAP-3520 A1 Manual
75/80
D-Lnk DAP-3520 User Manual
g g ysent COD will either be rejected by D-Link or become the property o D-Link. Products shall be ully insured by the customerand shipped to D-Link Systems, Inc., 17595 Mt. Herrmann, Fountain Valley, CA 92708. D-Link will not be held responsibleor any packages that are lost in transit to D-Link. The repaired or replaced packages will be shipped to the customer viaUPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link i you use anaddress in the United States, otherwise we will ship the product to you reight collect. Expedited shipping is available uponrequest and provided shipping charges are prepaid by the customer. D-Link may reject or return any product that is not
packaged and shipped in strict compliance with the oregoing requirements, or or which an RMA number is not visible romthe outside o the package. The product owner agrees to pay D-Links reasonable handling and return shipping chargesor any product that is not packaged and shipped in accordance with the oregoing requirements, or that is determined byD-Link not to be deective or non-conorming.
What.Is.Not.Covered:The Limited Warranty provided herein by D-Link does not cover:Products that, in D-Links judgment, have been subjected to abuse, accident, alteration, modication, tampering, negligence, misuse, aultyinstallation, lack o reasonable care, repair or service in any way that is not contemplated in the documentation or the product, or i themodel or serial number has been altered, tampered with, deaced or removed; Initial installation, installation and removal o the product or
repair, and shipping costs; Operational adjustments covered in the operating manual or the product, and normal maintenance; Damagethat occurs in shipment, due to act o God, ailures due to power surge, and cosmetic damage; Any hardware, sotware, rmware or otherproducts or services provided by anyone other than D-Link; and Products that have been purchased rom inventory clearance or liquidationsales or other sales in which D-Link, the sellers, or the liquidators expressly disclaim their warranty obligation pertaining to the product.
While necessary maintenance or repairs on your Product can be perormed by any company, we recommend that you use only an AuthorizedD-Link Service Oce. Improper or incorrectly perormed maintenance or repair voids this Limited Warranty.
Disclaimer.o.Other.Warranties:
EXCEPT FOR THE LIMITED WARRANTY SPECIFIED HEREIN, THE PRODUCT IS PROVIDED AS-IS WITHOUT ANY WARRANTYOF ANY KIND WHATSOEVER INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF MERCHANTABILITY, FITNESS FOR APARTICULAR PURPOSE AND NONINFRINGEMENT.
IF ANY IMPLIED WARRANTY CANNOT BE DISCLAIMED IN ANY TERRITORY WHERE A PRODUCT IS SOLD, THE DURATION OFSUCH IMPLIED WARRANTY SHALL BE LIMITED TO THE DURATION OF THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.EXCEPT AS EXPRESSLY COVERED UNDER THE LIMITED WARRANTY PROVIDED HEREIN, THE ENTIRE RISK AS TO THE QUALITY,SELECTION AND PERFORMANCE OF THE PRODUCT IS WITH THE PURCHASER OF THE PRODUCT.
Limitation.o.Liability:
-
8/2/2019 DAP-3520 A1 Manual
76/80
2D-Lnk DAP-3520 User Manual
yTO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITYOR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANYCHARACTER, WHETHER DIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL (INCLUDING, BUT NOT LIMITED TO, DAMAGES FORLOSS OF GOODWILL, LOSS OF REVENUE OR PROFIT, WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, FAILURE OFOTHER EQUIPMENT OR COMPUTER PROGRAMS TO WHICH D-LINKS PRODUCT IS CONNECTED WITH, LOSS OF INFORMATIONOR DATA CONTAINED IN, STORED ON, OR INTEGRATED WITH ANY PRODUCT RETURNED TO D-LINK FOR WARRANTY SERVICE)
RESULTING FROM THE USE OF THE PRODUCT, RELATING TO WARRANTY SERVICE, OR ARISING OUT OF ANY BREACH OFTHIS LIMITED WARRANTY, EVEN IF D-LINK HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. THE SOLE REMEDYFOR A BREACH OF THE FOREGOING LIMITED WARRANTY IS REPAIR, REPLACEMENT OR REFUND OF THE DEFECTIVE ORNONCONFORMING PRODUCT. THE MAXIMUM LIABILITY OF D-LINK UNDER THIS WARRANTY IS LIMITED TO THE PURCHASEPRICE OF THE PRODUCT COVERED BY THE WARRANTY. THE FOREGOING EXPRESS WRITTEN WARRANTIES AND REMEDIESARE EXCLUSIVE AND ARE IN LIEU OF ANY OTHER WARRANTIES OR REMEDIES, EXPRESS, IMPLIED OR STATUTORY.
Governing.Law:This Limited Warranty shall be governed by the laws o the State o Caliornia. Some states do not allow exclusion or limitation o incidentalor consequential damages, or limitations on how long an implied warranty lasts, so the oregoing limitations and exclusions may not apply.This Limited Warranty provides specic legal rights and you may also have other rights which vary rom state to state.
Trademarks:D-Link is a registered trademark o D-Link Corporation/D-Link Systems, Inc. Other trademarks or registered trademarks are the propertyo their respective owners.
Copyright.Statement:No part o this publication or documentation accompanying this product may be reproduced in any orm or by any means or used to makeany derivative such as translation, transormation, or adaptation without permission rom D-Link Corporation/D-Link Systems, Inc., as
stipulated by the United States Copyright Act o 1976 and any amendments thereto. Contents are subject to change without prior notice.
Copyright 2009 by D-Link Corporation/D-Link Systems, Inc. All rights reserved.
CE.Mark.Warning:This is a Class B product. In a domestic environment, this product may cause radio intererence, in which case the user may be requiredto take adequate measures.
-
8/2/2019 DAP-3520 A1 Manual
77/80
3D-Lnk DAP-3520 User Manual
FCC.Statement:This equipment has been tested and ound to comply with the limits or a Class B digital device, pursuant to part 15 o the FCC Rules.These limits are designed to provide reasonable protection against harmul intererence in a residential installation. This equipmentgenerates, uses, and can radiate radio requency energy and, i not installed and used in accordance with the instructions, may causeharmul intererence to radio communication. However, there is no guarantee that intererence will not occur in a particular installation. Ithis equipment does cause harmul intererence to radio or television reception, which can be determined by turning the equipment o
and on, the user is encouraged to try to correct the intererence by one or more o theollowing measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit dierent rom that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician or help.
FCC.Caution:.Any changes or modications not expressly approved by the party responsible or compliance could void the users authority to operatethis equipment.
This device complies with Part 15 o the FCC Rules. Operation is subject to the ollowing two conditions:(1) This device may not cause harmul intererence, and (2) this device must accept any intererence received, including intererence thatmay cause undesired operation.
I this device is going to be operated in 5.15 ~ 5.25GHz requency range, then it is restricted in indoor environment only.
IMPORTANT.NOTICE:
FCC Radiation Exposure Statement:This equipment complies with FCC radiation exposure limits set orth or an uncontrolled environment. This equipment should be installedand operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating inconjunction with any other antenna or transmitter.
The availability o some specic channels and/or operational requency bands are country dependent and are rmware programmed atthe actory to match the intended destination. The rmware setting is not accessible by the end user.
For detailed warranty inormation applicable to products purchased outside the United States, please contact the corresponding localD-Link oce.
Industry.Canada.Notice:
-
8/2/2019 DAP-3520 A1 Manual
78/80
D-Lnk DAP-3520 User Manual
This device complies with RSS-210 o the Industry Canada Rules. Operation is subject to the ollowing two conditions:(1) This device may not cause harmul intererence, and (2) this device must accept any intererence received, including intererence thatmay cause undesired operation.IMPORTANT.NOTE:
Radiation Exposure Statement:This equipment complies with IC radiation exposure limits set orth or an uncontrolled environment. This equipment should be installedand operated with minimum distance 20cm between the radiator & your body.This device has been designed to operate with an antenna having a maximum gain o 10dBi. Antenna having a higher gain is strictlyprohibited per regulations o Industry Canada. The required antenna impedance is 50ohms.
Technical Support
-
8/2/2019 DAP-3520 A1 Manual
79/80
5D-Lnk DAP-3520 User Manual
Technical Support
You can nd sotware updates and user documentation on the D-Link website.
U.S. and Canadian customers can contact D-Link technical support through our website, or by phone.
Tech Support or customers within the United States:
D-Link Technical Support over the Telephone:(877) 354-6555
D-Link Technical Support over the Internet:http://support.dlink.com
Tech Support or customers within Canada:
D-Link Technical Support over the Telephone:(877) 354-6560
D-Link Technical Support over the Internet:
http://support.dlink.com
Registration
-
8/2/2019 DAP-3520 A1 Manual
80/80
Version 1.0March 6 2009
Product registration is entirely voluntary and ailure to complete or return this orm will not diminish your warrantyrights.
Registration