ASM 105S, 115S F132: Damper actuator with SAUTER Universal ...
Damper actuator Selector Guide (SIEMENS)
-
Upload
syed-m-jawwad -
Category
Documents
-
view
701 -
download
11
Transcript of Damper actuator Selector Guide (SIEMENS)
HVAC Products
s
OpenAir™ Electronic DamperActuators Selection Guide.
Experience the difference.
2
150 years of industry experience is the cornerstone of our success
More Experience
www.sibt.comInformation at your fingertips
A leader in the Heating, Ventilation and Air
Conditioning (HVAC) industry, Siemens Buil-
ding Technology delivers the products and ser-
vices that you depend on for outstanding qua-
lity, reliability and performance.
Delivered ready to mount and go
With standardized footprints, wiring configura-
tions and checkout procedures, OpenAirTM elec-
tronic damper actuators are designed for fast
installation resulting in lower installed cost.
Quality as a requirement
OpenAirTM damper actuators are 100% factory-
assembled and tested at our state-of-the-art,
ISO9002 certified manufacturing facility loca-
ted in Staefa, Switzerland.
Need it fast?
Same day shipping is no problem for rush
orders. Helpful customer service representati-
ves can input your order and ship within three
business days for standard shipping.
Instant Information Access
Go on-line for technical documentation and
installation instructions at our web site and
locate information faster than ever before.
Now, that’s smart
3
Fl oating 3-position 24 VAC GEB131.1U GEB132.1U GEB136.1UModulating 0-10 VDC 24 VAC GEB161.1U GEB164.1U
Floating 3-position 24 VAC GLB131.1E GLB132.1E GLB136.230 VAC GLB331.1E GLB332.1E GLB336.
Modulating 0-10 VDC 24 VAC GLB161.1E GLB163.1E GLB164.1E GLB166.
Floating 3-position 24 VAC GBB131.1E GBB135.1E GBB136.230 VAC GBB331.1E GBB335.1E GBB336.
Modulating 0-10 VDC 24 VAC GBB161.1E GBB163.1E GBB164.1E GBB166.
Floating 3-position 24 VAC GIB131.1E GIB135.1E GIB336.1230 VAC GIB331.1E GIB335.1E GIB336.1
Modulating 0-10 VDC 24 VAC GIB161.1E GIB163.1E GIB164.1E GIB166.1
GIB Series35 Nm for approx.6 m2 damper area
150 sec. Run Time(50Hz)
GMA Series7 Nm for approx.1.5 m2 damper area
90 sec. Run Time15 sec. SR Time
GCA Series16 Nm for approx.3 m2 damper area
90 sec. Run Time15 sec. SR Time
GDB Series5 Nm for approx.0.8 m2 damper area
150 sec. Run Time(50 Hz)
GBB Series20 Nm for approx.5 m2 damper area
150 sec. Run Time(50Hz)
On/Off 2-position 24 VAC/VDC GMA121.1E GMA126230 VAC GMA321.1E GMA326
Floating 3-position 24 VAC/VDC GMA131.1E GMA132.1E GMA136
Modulating 0-10 VDC 24 VAC/VDC GMA161.1E GMA163.1E GMA164.1E GMA166
On/Off 2-position 24 VAC GCA121.1E GCA126230 VAC GCA321.1E GCA326
Floating 3-position 24 VAC GCA131.1E GCA135.1E
Modulating 0-10 VDC 24 VAC GCA161.1E GCA163.1E GCA164.1E GCA166
Floating 3-position 24 VAC GDB131.1E GDB132.1E GDB136.230 VAC GDB331.1E GDB332.1E GDB336.
Modulating 0-10 VDC 24 VAC GDB161.1E GDB163.1E GDB164.1E GDB166.
GEB Series15 Nm for approx.3 m2 damper area
150 sec. Run Time(50 Hz)
Floating 3-position 24 VAC GEB131.1E GEB132.1E GEB136.230 VAC GEB331.1E GEB332.1E GEB336.
Modulating 0-10 VDC 24 VAC GEB161.1E GEB163.1E GEB164.1E GEB166.
Control Power Standard Feedback Adjustable Adjustable Feedback 2 Auxiliasignal supply model potentio- start/span start/span (1kΩ) with switches
meter with 2 auxi- 2 auxiliary (1kOhm) liary switches switches
Sp
rin
g R
etu
rn P
rod
uct
s a
nd
A
cce
sso
rie
sN
on
-Sp
rin
g R
etu
rn P
rod
uct
s a
nd
Acc
ess
ori
es
GLB Series10 Nm for approx.1.5 m2 damper area
150 sec. Run Time(50 Hz)
4
EE
E
EE
E
EE
E
ASK71.3 ASK71.4 ASK71.1 ASK71.2 ASK74.1 ASK73.1 ASK73.2 ASK75.1 ASK71.9
ASK71.5 ASK71.6 ASK71.6 ASK71.6 ASK71.9
ASK71.5 ASK71.6 ASK71.6 ASK71.6 ASK71.9
ASK71.3 ASK71.4 ASK71.1 ASK71.2 ASK74.1 ASK73.1 ASK73.2 ASK75.1 ASK71.9
ASK71.3 ASK71.4 ASK71.1 ASK71.2 ASK74.1 ASK73.1 ASK73.2 ASK75.1 ASK71.9
1E1E
1E
1E
1E1E
1E
EE
E
ASK71.13 ASK71.14 ASK71.11 ASK71.11 ASK73.3 ASK75.3 ASK71.9
ASK71.13 ASK71.14 ASK71.11 ASK71.11 ASK73.3 ASK75.3 ASK71.9
EE
E
RRoottaarryy ttoo RRoottaarryy ttoo FFlloooorr FFrraammee OOvveerrssiizzeedd TTaannddeemm TTaannddeemm WWeeaatthheerr UUnniivveerrssaalllliinneeaarr kkiitt lliinneeaarr kkiitt mmoouunntt kkiitt mmoouunntt kkiitt sshhaafftt bbrraacckkeett-- bbrraacckkeett sshhiieelldd LLeevveerr
ww//mmoouunnttiinngg aaddaapptteerr 22 pptt..//33 pptt.. && mmoodduullaattiinnggbbrraacckkeett ((ttoo 2266..55mmmm)) EElleecc.. ttaannddeemm ccoonnttrrooll
y
5
Floating 3-position 24 VAC GLB131.2E GLB132.2E230VAC GLB331.2E GLB332.2E
Modulating 0-10 VDC 24 VAC GLB161.2E GLB163.2E GLB164
Floating 3-position 24 VAC GBB131.2E230VAC GBB331.2E
Modulating 0-10 VDC 24 VAC GBB161.2E GBB163.2E GBB164
GDB Series
125 N for approx.0.8 m2 damper area
150 sec. Run Time(50 Hz)
GBB Series
440 N for approx.4 m2 damper area
150 sec. Run Time(50Hz)
Floating 3-position 24 VAC GDB131.2E GDB132.2E230VAC GDB331.2E GDB332.2E
Modulating 0-10 VDC 24 VAC GDB161.2E GDB163.2E GDB164
GEB Series
400 N for approx.3 m2 damper area
150 sec. Run Time(50 Hz)
Floating 3-position 24 VAC GEB131.2E GEB132.2E230VAC GEB331.2E GEB332.2E
Modulating 0-10 VDC 24 VAC GEB161.2E GLB163.2E GEB164
Control Power Standard Feedback Adjustable Adjustabsignal supply model potentio- start/span start/spa
meter with 2 au(1kOhm) ary switc
No
n-S
pri
ng
re
turn
Pro
du
cts
an
d A
cce
sso
rie
s
GLB Series
250 N for approx.1.5 m2 damper area
150 sec. Run Time(50 Hz)
Fl oating 3-position 24 VAC GEB131.1U GEB132.1U
Modulating 0-10 VDC 24 VAC GEB161.1U G
Floating 3-position 24 VAC GLB181.1E/3
Modulating 0-10 VDC 24 VAC GLB181.1E/3
On / Off 2-position 24 VAC230VAC
GDB 300 Pa VAV Controller *
5 Nm for approx.0.8 m2 damper area
150 sec. Run Time(50 Hz)
GGA F&S Actuator *
16 Nm for approx.3 m2 damper area
90 sec. Run Time>15 sec. SR Time
Floating 3-position 24 VAC GDB181.1E/3
Modulating 0-10 VDC 24 VAC GDB181.1E/3
ASV 300 Pa VAVController * Floating 3-position 24 VAC ASV181.1E/3
Modulating 0-10 VDC 24 VAC ASV181.1E/3
Control Power Standard Feedback Adjustable Adjustabsignal supply model potentio- start/span start/spa
meter with 2 au(1kOhm) ary switc
Sp
eci
al O
EM
Pro
du
cts
GLB 300 Pa VAV Controller *
10 Nm for approx.1.5 m2 damper area
150 sec. Run Time(50 Hz)
Key: * Only available through OEM channel
6
66
GLB136.2EGLB336.2E
2E GLB166.2E
GBB135.2E GBB136.2EGBB335.2E GBB336.2E
2E GBB166.2E
ASK55.2
ASK55.2
ASK72.2 ASK72.1 ASK75.2
GDB136.2EGDB336.2E
2E GDB166.2E
ASK72.3
GEB136.2EGEB336.2E
2E GEB166.2E
e Feedback 2 Auxiliaryn (1kΩ) with switchesxili- 2 auxiliaryhes switches
GEB136.1U
EB164.1U
GGA126.1EGGA326.1E
AST10 AST11 ACS931
ASK79.1ASK79.1
Linear to Linear to Clamp Weather Setting Interface Calibration Lockingrotary kit rotary kit shield unit converter Software platew/mounting with cardanplate joint
e Feedback 2 Auxiliaryn (1kΩ) with switchesxili- 2 auxiliaryhes switches
AST10 AST11 ACS931
AST10 AST11 ACS931
AST10 AST11 ACS931
AST10 AST11 ACS931
AST10 AST11 ACS931
Linear to Linear to Clamp Weatherrotary kit rotary kit shieldw/mounting with cardanplate joint
7
Expanded product line deliverspower and flexibility
GDB/GLB Series
Small Non-Spring Return
• Terminal Units
• Face and By-Pass Dampers
• Multi-zone Mixing Boxes
• By-pass Dampers (VAV)
• Make-up Air Dampers
• Unit Ventilators
GMA/GEB Series
Medium Spring Return/
Non-Spring Return
• Outside Air Dampers
• Mixing Boxes
• Return Air Dampers
• Zone Isolation Dampers
• Make-up Air Dampers
• Unit Ventilators
GCA/GBB/GIB Series
Large Spring Return/
Non-Spring Return
• Outside Air Dampers
• Rooftop Units
• Mixing Boxes
• Vortex Dampers
• Inlet Vane Dampers
• Return Air Dampers
• Zone Isolation Dampers
More Solutions
8
Spring Return
Self-centering shaft coupling
with patented design relieves
strain on the actuator for lon-
ger motor life and increased
reliability.
Position indicators are univer-
sally located for at-a-glance
verification.
Manual override allows actua-
tor to be mounted and com-
missioned before power is
available for quick installation.
Optional built-in adjustable
start/span available factory-in-
stalled for faster installation.
New Features!
Single-bolt fastening for easy installation
and reduced installed cost.
AC/DC operation for added flexibility.
Auxiliary end switch adjustment on both
sides of the actuator
Compact footprint for ease of installation.
Enhanced functionality with scaling con-
trol signal from 0 to 10 V or 10 to 0 V for
added flexibility.
Direct-coupled connection for on-the-go
installation.
Position measured continuously with no need
to power up at start up, saving time.
Full-stroke overload protection kicks in auto-
matically to protect motor and components.
Pre-cabled, options are factory installed for fa-
ster, easier installs in the field.
Consistent wiring detail across product
family for faster installs and lower in-
stalled cost.
Brushless motor technology for quiet,
low noise operation.
GMA model shown.
Rugged housing on all models
for added durability and lon-
gevity.
Other SR models: GCA
More Benefits
9
Non-Spring Return
Position indicators are universally located for
at-a-glance verification.
Rugged housing on all models for added dura-
bility and longevity.
Optional built-in adjustable start/span available
factory installed for faster installation.
Auxiliary end switch adjust-
ment.
Shaft coupling with patented
design relieves strain on the
actuator for longer motor life
and increased reliability.
Manual override allows actua-
tor to be mounted and com-
missioned before power is
available for quick installation.
Direct-coupled connection snap on for on-the-
go, fast installation.
Full-stroke protection kicks in automatically to
protect motor and components.
Pre-cabled, options are factory installed for fa-
ster, easier installs in the field.
Small footprint provides powerful performance.
Consistent wiring detail
across product family for fa-
ster installs and lower instal-
led cost.
Synchronous motor technology
for quiet, low noise operation.
GEB model shown.
Other NSR models: GDB, GLB, GBB, GIB
More Performance
10
Rugged housing on all models
for added durability and lon-
gevity.
Optional built-in adjustable
start/span available factory-
installed for faster installation.
Auxiliary end switch adjustment.
Manual override allows actuator to be moun-
ted and commissioned before power is availa-
ble for quick installation.
Full-stroke protection kicks in automatically to
protect motor and components.
Pre-cabled, options are factory installed for fa-
ster, easier installs in the field.
Small footprint provides powerful performance.
Consistent wiring detail across product family
for faster installs and lower installed cost.
Synchronous motor technology for quiet, low
noise operation.
GEB model shown.
Other NSR models: GDB, GLB, GBB
Non-Spring Return, linear
More Alternatives
11
Short Shaft Mounting Option
For easy mounting on short shafts without
special accessories, the self-centering shaft ad-
apter can be mounted on the backside of the
actuator.
Each actuator includes an adapter so that the
position indicator is still easily viewed.
Frame Mounting
The Frame Mounting Kit is used when actuator
cannot be directly mounted on damper shaft
due to space limitations.
Foot Mounting
Easily replace existing Honeywell, Joventa,
and Belimo modulating motors using the Foot
Mounting Kit.
The Foot Mounting Kit can also be used for
placing the actuator in the air stream and
linking to the damper blades.
More Mounting Alternatives
12
Actuators Mounted in Tandem
OpenAir™ actuators can be mounted in tan-
dem to effectively double the torque of a
single actuator. This unique feature allows
OpenAir™ actuators to operate in a wider
range of applications.
Unit Ventilator Applications
Excellent when space is limited, the GMA and
GEB have a small footprint for easy mounting.
High torque, full features, and a small footprint
make the GMA and GEB actuators a perfect
choice for Unit Ventilator Applications.
13
Electronic Tandem Control
When critical control is needed in a modula-
ting application, one control signal can control
two actuators in a master-slave configuration.
The secondary unit can be mounted up to 5 m
away from the primary actuator.
This feature is available on the GMA models.
14
Hex Key • 74 109 0017 0
Hex Key • 4 109 2111 0
Adjustment Key 1 ea. • 74 109 0013 0
Rotary to Linear Set • ASK71.5
Rotary to Linear Set with Lever • ASK71.13
• ASK71.3
Rotary to Linear Set with • ASK71.6
Lever and Angle Bracket
Rotary to Linear Set with Lever • ASK71.14
and Mounting Plate
• ASK71.4
Universal Lever • • • ASK71.9
DDeessccrriippttiioonn GGDDBB// GGEEBB// GGCCAA//GGIIBB
GGLLBB GGMMAA GGBBBB PPaarrtt NNoo..
Allows a direct-coupled actuator to
provide an auxiliary linear drive; can be
used to simultaneously drive a set of
opposing or adjacent dampers with a
single actuator.
For use in applications where the
actuator can be rigidly surface-moun-
ted and a linear stroke output is
required.
For use in applications where the
actuator can be rigidly surface-mounted
and a linear stroke output is required.
For use with all OpenAir™ rotary to
linear kits for linear applications requi-
ring connection to damper louver shaft
when joint connection is not possible.
For 3/8 to 1” (8 to 25.6 mm) Dia.
or 3/8 to 5/8” (8 to 16 mm) Sq.
Allows a direct-coupled actuator to pro-
vide a linear drive; can be used to simul-
taneously drive a set of opposing or ad-
jacent dampers with a single actuator.
OpenAir™ Accessories
15
DDeessccrriippttiioonn GGDDBB// GGEEBB// GGCCAA//GGIIBB
GGLLBB GGMMAA GGBBBB PPaarrtt NNoo..
For airstream applications and where a
foot-mounted actuator can be used.
Ideal replacement of a Honeywell
MOD motor. Includes crank arm, Te-
flon support-bearing ring, and moun-
ting fasteners.
For direct direct mounting to damper
frame. Includes a crank arm to gene-
rate a linear stroke, a Teflon support-
bearing ring to minimize side-loading
on the actuator’s output bearing, and
other mounting fasteners.
Tandem Mounting Bracket • ASK73.3
Tandem Mounting Bracket • ASK73.1
for 2-position and floating
GCA/GIB models
Tandem Mounting Bracket • ASK73.2
for modulating
GCA/GIB models.
Floor Mount Kit • ASK71.6
• ASK71.1
Combined Foot/Frame • ASK71.11
Mount Kit
Frame Mount Kit • ASK71.2
Combined Foot/Frame • ASK71.11
Mount Kit
Anti-Rotation Bracket • 4 190 7152 0
Anti-Rotation Bracket • 74 190 0013 0
Anti-Rotation Bracket • 4 190 6599 0
Replacement Standard • 74 718 0008 0
Shaft Adapter • 4 718 1402
16
Special Shaft Adapter
• up to 1.05” shaft • 4 718 1406 0
Accepts up to 1-1/20” (27 mm) diameter shaft
and can be used for coupling to 1.05” (27 mm)
jackshafts that are slightly oversized. Note:
When used with a GIB, accepts shaft diameters
from 3/4 to 1-1/20” (19 to 27 mm)
3/8” Actuator Shaft Insert
for small shaft diameters
• up to 3/8” • ASK78.3
Replacement Standard Visual • 4 304 1349 0
Position Indicators/10 Pk. • 74 304 0000 0
• 4 304 1348 0
Weathershield • ASK75.3
• ASK75.1
Includes cover, base plate with factory-installed
gasketing, 15 TEK self-drilling screws, and anti-
rotation (mounting) bracket. Knockouts for
connection of 1/2” conduit also included.
Setting Unit • AST10
Handheld programming tool for our VAV
controller GDB/GLB/ASV181.1E/3
DDeessccrriippttiioonn GGDDBB// GGEEBB// GGCCAA//GGIIBB
GGLLBB GGMMAA GGBBBB PPaarrtt NNoo..
OpenAir™ Accessories (continued)
17
DDeessccrriippttiioonn GGDDBB// GGEEBB// GGCCAA//GGIIBB
GGLLBB GGMMAA GGBBBB PPaarrtt NNoo..
Interface Converter • AST11
PPS2 to RS232 Interface Converter in context
with our GDB/GLB/ASV1811E/3
18
0 to 10 V Actuators Powered by One Transformer
Multiple OpenAir™ 0 to 10 V actuators
can be powered off of one transformer.
Power up to ten actuators off of one trans-
former
0 to 10 V Actuators Wired in Parallel with One Transformer
OpenAir™ 0 to10 V actuators can be wired
in parallel with one signal driving up to ten
actuators. Feedback should not be wired
together and can be read off of one of the
actuators.
0 to 10 V Actuators Wired in Parallel with Multiple Transformers
OpenAir™ 0 to10 V actuators can be wired in
parallel with one signal driving a bank of up
to ten actuators. Multiple transformers can
power multiple actuators. Feedback should
not be wired together and can be read off of
one of the actuators.
Sequencing of 0 to 10 V Actuators
With the settings shown, two 0 to 10 V
actuators can be sequenced such that the
first one will operate at 0 to 2 V and the
second at 2 to 10 V.
This feature is perfect for specialized applica-
tions, such as staging or minimum required
airflow.
More Wiring Options
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
19
2-position 24 V Actuators Wired in Parallel
Two actuators can be wired in parallel to ef-
fectively double the torque or may be moun-
ted separately and operated in parallel.
2-position 230 V Actuators Wired in Parallel
Two actuators can be wired in parallel to ef-
fectively double the torque or may be moun-
ted separately and operated in parallel.
3-position Actuators Wired in Parallel
Two actuators can be wired in
parallel to effectively double
the torque or may be mounted
separately and operated in parallel.
GMA/GCA Series GDB/GLB/GEB/GBB/GIB Series
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
EARTH GROUNDISOLATING CLASS IITRANSFORMER FOR24 VAC POWER
20
OpenAir™ GMA Series Spring Return, Direct-Coupled Electronic Damper Actuators
7 Nm
24 VAC/DC and 230 VAC
Modulating
2-position/3-position
N474
Specifications
Torque 7 Nm running and
spring return
Runtime for 90° 90 sec. operating
15 sec. typical closing
Frequency 50/60 Hz
Power consumption 24 VAC/DC
Running 5 VA/3.5 W
Holding 2.5 W
Power consumption 230 VAC
Running and
Holding 7 VA/4.5 W
Holding 3.5 W
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 6.4 to 20.5 mm Dia.
6.4 to 13 mm Sq.
20 mm min. length
Operating
temperature -32 to +55 °C
Storage temperature -32 to +70 °C
Ambient humidity <95% RH,
non-condensing
Enclosure IP54
Pre-cabled connection 0.75 mm2, 0.9 m long
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die cast aluminum
alloy
Gear Lubrication Silicone free
Dimensions 192 mm H x 81 mm
W x 63 mm D
Weight 1.3 kg
Submittal Summary
Dimensions shown in mm
Dimensions
21
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC/DC
2-position, 24 VAC/DC 3-position, 24 VAC/DC2-position, 230 VAC
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
24
VD
C±
15
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
2-p
osi
tio
n
Mo
du
lati
ng
0 t
o 1
0 V
DC
Off
set
and
Span
Inpu
t Si
gnal
Inve
rsio
n
Inp
ut
Sig
nal
Sele
ctab
le
Elec
. Ta
nd
em
Co
ntr
ol
GMA121.1E
GMA126.1E
GMA321.1E
GMA326.1E
GMA131.1E
GMA132.1E
GMA136.1E
GMA161.1E
GMA163.1E
GMA164.1E
GMA166.1E
22
OpenAir™ GCA Series Spring Return, Electronic Damper Actuators
16 Nm
24 VAC and 230 VAC
Modulating
2-position/3-position
Specifications
Torque 16 Nm running and
spring return
Runtime for 90° 90 sec. operating
15 sec. typical closing
Frequency 50/60 Hz
Power consumption
Running 9 VA (0 to 10 V, modulating)
8 VA (24 VAC, 2-position)
9 VA (230 VAC, 2-position)
8 VA (24 VAC, 3-position)
Holding 2.2 W (0 to 10 V, modulating)
1.5 W (24 VAC, 2-position)
2.3 W (230 VAC, 2-position)
1.5 W (24 VAC, 3-position)
Angle of rotation 90° nominal,
95° max.
Shaft dimensions 8 to 25.6 mm Dia.
6 to 18 mm Sq.
20 mm min. length
Operating temperature-32 to +55 °C
Storage temperature -40 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die cast aluminum alloy
Gear Lubrication Silicone free
Dimensions* 300 mm H x 120 mm
W x 72 mm D
Weight 2.1 kg
Submittal Summary
Dimensions
N474
Dimensions shown in mm
23
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
2-position, 24 VAC 3-position, 24 VAC2-position, 230 VAC
GCA121.1E
GCA126.1E
GCA321.1E
GCA326.1E
GCA131.1E
GCA135.1E
GCA161.1E
GCA163.1E
GCA164.1E
GCA166.1E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
2-p
osi
tio
n
0 t
o 1
0 V
DC
Off
set
and
Span
24
OpenAir™ GDB Series Non-Spring Return, Electronic Damper Actuators
5 Nm
24 VAC and 230 VAC
Modulating
3-position Control
Specifications
Torque 5 Nm
Runtime for 90° 150 sec. (50 Hz)
opening and closing
Frequency 50/60 Hz
Power consumption 24 VAC
Running 3 VA (modulating)
Running 2 VA (3-position)
Holding 1 W (modulating)
Power consumption 230 VAC
Running 2 VA
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 8 to 16 mm Dia.
6 to 12.8 mm Sq.
30 mm min. length
Operating temperature -30 to +55 °C
Storage temperature -30 to +60 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Durable plastic
Gear Lubrication Silicone free
Dimensions 137 mm H x 70 mm
W x 60 mm D
Weight 0.48 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
25
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GDB131.1E
GDB132.1E
GDB136.1E
GDB331.1E
GDB332.1E
GDB336.1E
GDB161.1E
GDB163.1E
GDB164.1E
GDB166.1E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
0 t
o 1
0 V
DC
Span
an
d
Off
set
26
OpenAir™ GLB Series Non-Spring Return, Electronic Damper Actuators
10 Nm
24 VAC and 230 VAC
Modulating
3-position Control
Specifications
Torque 10 Nm
Runtime for 90° 150 sec. (50 Hz)
opening and closing
Frequency 50/60 Hz
Power consumption 24 VAC
Running 3 VA (modulating)
Running 2 VA (3-position)
Holding 1 W (modulating)
Power consumption 230 VAC
Running 2 VA
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 8 to 16 mm Dia.
6 to 12.8 mm Sq.
30 mm min. length
Operating temperature -30 to +55 °C
Storage temperature -30 to +60 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Durable plastic
Gear Lubrication Silicone free
Dimensions 137 mm H x 70 mm
W x 60 mm D
Weight 0.48 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
27
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GLB131.1E
GLB132.1E
GLB136.1E
GLB331.1E
GLB332.1E
GLB336.1E
GLB161.1E
GLB163.1E
GLB164.1E
GLB166.1E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
0 t
o 1
0 V
DC
Span
an
d
Off
set
28
OpenAir™ GEB Series Non-Spring Return, Electronic Damper Actuators
15 Nm
24 VAC and 230 VAC
Modulating
3-position
Specifications
Torque 15 Nm
Frequency 50/60 Hz
Runtime for 90° 150 seconds (50 Hz)
Power consumption 24 VAC
Running 4 VA (3-position)
Running 6 VA (modulating)
Holding 1.5 W (modulating)
Power consumption 230 VAC
Running 3 VA
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 6 to 20.5 mm Dia.
6.4 to 13 mm Sq.
20 mm min. length
Operating temperature -32 to +55 °C
Storage temperature -32 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die cast aluminum alloy
Gear Lubrication Silicone free
Dimensions* 192 mm H x 81 mm
W x 63 mm D
Weight 1.1 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
29
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GEB131.1E
GEB132.1E
GEB136.1E
GEB331.1E
GEB332.1E
GEB336.1E
GEB161.1E
GEB163.1E
GEB164.1E
GEB166.1E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Off
set
and
Span
Du
al A
uxi
liary
Swit
ches
3-p
osi
tio
n
Posi
tio
n
Feed
bac
k
0 t
o 1
0 V
DC
Inp
ut
Sig
nal
Sele
ctab
le
30
OpenAir™ GBB Series Non-Spring Return, Electronic Damper Actuators
20 Nm
24 VAC and 230 VAC
Modulating
3-position
Specifications
Torque 20 Nm
Runtime for 90° 150 sec. (50Hz)
Frequency 50/60 Hz
Power consumption 24 VAC
Running 5 VA (3-position)
Running 4 VA (modulating)
Holding 1 W (modulating)
Power consumption 230 VAC
Running 8 VA
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 8 to 25.6 mm Dia.
6 to 18 mm Sq.
20 mm min. length
Operating temperature -32 to 55 °C
Storage temperature -40 to 70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die-cast aluminum alloy
Gear Lubrication Silicone free
Dimensions 300 mm H x 120 mm
W x 72 mm D
Weight 2.0 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
31
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GBB131.1E
GBB135.1E
GBB136.1E
GBB331.1E
GBB335.1E
GBB336.1E
GBB161.1E
GBB163.1E
GBB164.1E
GBB166.1E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
0 t
o 1
0 V
DC
Span
an
d
Off
set
3232
OpenAir™ GIB Series Non-Spring Return, Electronic Damper Actuators
35 Nm
24 VAC and 230 VAC
Modulating
3-position
Specifications
Torque 35 Nm
Runtime for 90° 150 sec. (50Hz)
Frequency 50/60 Hz
Power consumption 24 VAC
Running 10 VA (3-position)
Running 6 VA (modulating)
Holding 2 W (modulating)
Power consumption 230 VAC
Running 13 VA
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 8 to 25.6 mm Dia.
6 to 18 mm Sq.
20 mm min. length
Operating temperature 32 to +55 °C
Storage temperature 40 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die-cast aluminum alloy
Gear lubrication Silicone free
Dimensions 300mm H x 120 mm
W x 72 mm D
Weight 2.0 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
3333
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GIB131.1E
GIB135.1E
GIB136.1E
GIB331.1E
GIB335.1E
GIB336.1E
GIB161.1E
GIB163.1E
GIB164.1E
GIB166.1E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
Mo
du
lati
ng
0 t
o 1
0 V
DC
Span
an
d
Off
set
34
OpenAir™ GDB Series Non-Spring Return, Linear movementElectronic Damper Actuators
125 N
24 VAC and 230 VAC
Modulating
3-position Control
Specifications
Force 125 N
Runtime for 60 mm 150 sec. (50 Hz)
opening and closing
Frequency 50/60 Hz
Power consumption 24 VAC
Running 3 VA (modulating)
Running 2 VA (3-position)
Holding 1 W (modulating)
Power consumption 230 VAC
Running 2 VA
Stroke 60 mm nominal,
64 mm max.
Operating temperature -30 to +55 °C
Storage temperature -30 to +60 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP40
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Durable plastic
Gear Lubrication Silicone free
Dimensions 137 mm H x 70 mm
W x 60 mm D
Weight 0.48 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
35
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GDB131.2E
GDB132.2E
GDB136.2E
GDB331.2E
GDB332.2E
GDB336.2E
GDB161.2E
GDB163.2E
GDB164.2E
GDB166.2E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
0 t
o 1
0 V
DC
Span
an
d
Off
set
36
OpenAir™ GLB Series Non-Spring Return, Linear movementElectronic Damper Actuators
250 N
24 VAC and 230 VAC
Modulating
3-position Control
Specifications
Force 250 N
Runtime for 60 mm 150 sec. (50 Hz)
opening and closing
Frequency 50/60 Hz
Power consumption 24 VAC
Running 3 VA (modulating)
Running 2 VA (3-position)
Holding 1 W (modulating)
Power consumption 230 VAC
Running 2 VA
Stroke 60 mm nominal,
64 mm max.
Operating temperature -30 to +55 °C
Storage temperature -30 to +60 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP40
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Durable plastic
Gear Lubrication Silicone free
Dimensions 137 mm H x 70 mm
W x 60 mm D
Weight 0.48 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
37
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GLB131.2E
GLB132.2E
GLB136.2E
GLB331.2E
GLB332.2E
GLB336.2E
GLB161.2E
GLB163.2E
GLB164.2E
GLB166.2E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
0 t
o 1
0 V
DC
Span
an
d
Off
set
38
OpenAir™ GEB Series Non-Spring Return, Linear movementElectronic Damper Actuators
400 N
24 VAC and 230 VAC
Modulating
3-position
Specifications
Force 400 N
Frequency 50/60 Hz
Runtime for 57mm 150 seconds (50 Hz)
Power consumption 24 VAC
Running 4 VA (3-position)
Running 6 VA (modulating)
Holding 1.5 W (modulating)
Power consumption 230 VAC
Running 3 VA
Stroke 57 mm nominal,
60 mm max.
Operating temperature -32 to +55 °C
Storage temperature -32 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP40
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die cast aluminum alloy
Gear Lubrication Silicone free
Dimensions 212 mm H x 81 mm
W x 60 mm D
Weight 0.9 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
39
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GEB131.2E
GEB132.2E
GEB136.2E
GEB331.2E
GEB332.2E
GEB336.2E
GEB161.2E
GEB163.2E
GEB164.2E
GEB166.2E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Off
set
and
Span
Du
al A
uxi
liary
Swit
ches
3-p
osi
tio
n
Posi
tio
n
Feed
bac
k
0 t
o 1
0 V
DC
Inp
ut
Sig
nal
Sele
ctab
le
40
OpenAir™ GBB Series Non-Spring Return, Linear movementElectronic Damper Actuators
440 N
24 VAC and 230 VAC
Modulating
3-position
Specifications
Force 440 N
Runtime for 70mm 150 sec. (50Hz)
Frequency 50/60 Hz
Power consumption 24 VAC
Running 5 VA (3-position)
Running 4 VA (modulating)
Holding 1 W (modulating)
Power consumption 230 VAC
Running 8 VA
Stroke 70 mm nominal,
75 mm max.
Operating temperature -32 to 55°C
Storage temperature -40 to 70°C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP40
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die-cast aluminum alloy
Gear Lubrication Silicone free
Dimensions 373 mm H x 100 mm
W x 67.5 mm D
Weight 2.0 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
41
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC 3-position, 230 VAC
GBB131.2E
GBB135.2E
GBB136.2E
GBB331.2E
GBB335.2E
GBB336.2E
GBB161.2E
GBB163.2E
GBB164.2E
GBB166.2E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
Posi
tio
n
Feed
bac
k
3-p
osi
tio
n
0 t
o 1
0 V
DC
Span
an
d
Off
set
42
OpenAir™ GDB, VAV Compact Controller Non-Spring Return,Electronic Damper Actuators
5 Nm
24 VAC
Modulating
3-position Control
Specifications
Torque 5 Nm
Runtime for 90° 150 sec. (50 Hz)
opening and closing
Frequency 50/60 Hz
Power consumption 24 VAC
Running 3 VA
Running+Calibration 7.5 VA
Holding 1 W
Vnom range 1.00 ... 2.55
Vmin range -20% ... 100%
Vmax range 20% ... 120%
Differential
pressure range 0 Pa ... 300 Pa
Accuracy (dP=2% ...
100%, Vn =1, T=25°C) ±2.5 %
Time constant 1 s
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 8 to 16 mm Dia.
6 to 12.8 mm Sq.
30 mm min. length
Operating temperature 0 to +50 °C
Storage temperature -25 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
Material Durable plastic
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Gear Lubrication Silicone free
Dimensions 137 mm H x 70 mm
W x 60 mm D
Weight 0.54 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
43
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC
GDB181.1E/3
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
Y1
an
d Y
2
op
en
/clo
se
sig
na
l
30
0 P
a st
atic
dif
fere
nti
al
pre
ssu
re
sen
sor
3-p
osi
tio
n
0 t
o 1
0 V
DC
44
OpenAir™ GLB, VAV Compact Controller Non-Spring Return,Electronic Damper Actuators
10 Nm
24 VAC
Modulating
3-position Control
Specifications
Torque 10 Nm
Runtime for 90° 150 sec. (50 Hz)
opening and closing
Frequency 50/60 Hz
Power consumption 24 VAC
Running 3 VA
Running+Calibration 7.5 VA
Holding 1 W
Vnom range 1.00 ... 2.55
Vmin range -20% ... 100%
Vmax range 20% ... 120%
Differential
pressure range 0 Pa ... 300 Pa
Accuracy (dP = 2% ...
100%, Vn=1, T=25° C) ±2.5 %
Time constant 1 s
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 8 to 16 mm Dia.
6 to 12.8 mm Sq.
30 mm min. length
Operating temperature 0 to +50 °C
Storage temperature -25 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
Material Durable plastic
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Gear Lubrication Silicone free
Dimensions 137 mm H x 70 mm
W x 60 mm D
Weight 0.54 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
45
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC
GLB181.1E/3
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
Y1
an
d Y
2
op
en/c
lose
sig
nal
30
0 P
a s
tati
c
dif
fere
nti
al
pre
ssu
re
sen
sor
3-p
osi
tio
n
0 t
o 1
0 V
DC
46
OpenAir™ ASV, VAV Controller
24 VAC
Modulating
3-position Control
Specifications
Frequency 50/60 Hz
Power consumption 24 VAC
Running 3 VA
Running+Calibration 7.5 VA
Holding 1 W
Vnom range 1.00 ... 2.55
Vmin range -20% ... 100%
Vmax range 20% ... 120%
Differential
pressure range 0 Pa ... 300 Pa
Accuracy (dP=2% ...
100%, Vn =1, T=25° C) ±2.5 %
Time constant 1 s
Operating temperature 0 to +50 °C
Storage temperature -25 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Durable plastic
Dimensions 135 mm H x 68 mm
W x 45 mm D
Weight 0.28 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
47
Wiring Diagrams
Modulating (0 to 10 VDC),
24 VAC
3-position, 24 VAC
Product
Number
Operating
Voltage
Control Built-in
Control Options
24
VA
C±
20
%
Y1
an
d Y
2
op
en/c
lose
sig
nal
30
0 P
a st
atic
dif
fere
nti
al
pre
ssu
re
sen
sor
3-p
osi
tio
n
0 t
o 1
0 V
DC
ASV181.1E/3
48
OpenAir™ GGA F&S Series Spring Return,Electronic Damper Actuators
16 Nm
24 VAC and 230 VAC
2-position
Specifications
Torque 16 Nm running and
spring return
Runtime for 90° 90 sec. operating
15 sec. typical closing
Frequency 50/60 Hz
Power consumption
Running 8 VA (24 VAC, 2-position)
9 VA (230 VAC, 2-position)
Holding 1.5 W (24 VAC, 2-position)
2.3 W (230 VAC, 2-position)
Angle of rotation 90° nominal, 95° max.
Shaft dimensions 8x8, 10x10,
12x12 mm Sq..
Operating temperature -32 to +55 °C
Storage temperature -40 to +70 °C
Ambient humidity <95% RH,
non-condensing
Pre-cabled connection 0.75 mm2, 0.9 m long
Thermo fuse 72 °C
Enclosure IP54
CE Conformity
Electromagnetic
Compatibility (EMC) 89/336/EEC
Emissions standards IEC/EN 61000-6-3
Immunity standards IEC/EN 61000-6-2
Material Die cast aluminum alloy
Gear Lubrication Silicone free
Dimensions* 300 mm H x 120 mm
W x 72 mm D
Weight 2.1 kg
Submittal Summary
N474
Dimensions shown in mm
Dimensions
49
Wiring Diagrams
2-position, 24 VAC/DC 2-position, 230 VAC
GGA126.1E
GGA326.1E
Product
Number
Operating
Voltage
Control Built-in
Control Options
24 V
AC
±20%
23
0 V
AC
±1
0%
Du
al A
uxi
liary
Swit
ches
2-p
osi
tio
n
Tem
per
atu
re
sen
sor
HVAC Products
Subject to technical alteration • Order-Nr. CR1736E • HVAC Products • Printed in Switzerland
Siemens Building Technologies AG
HVAC Products
Gubelstrasse 22
CH-6301 Zug
Tel. +41 41-724 24 24
Fax +41 41-724 35 22
Siemens Building Technologies Ltd
HVAC Products
Hawthorne Road
GB-Staines, Middlesex TW 18 3AY/
England
Tel. +44 1784 46 16 16
Fax +44 1784 46 46 46
Siemens Building Technologies
(Asia Pacific) Ltd.
HVAC Products
Asia-Pacific Headquarter
16/F., Laford Centre
838 Lai Chi Kok Road
Cheung Sha Wan
HK-Kowloon
Tel. +852 29175 700
Fax +852 29175 733
www.sibt.com