DAFTAR PUSTAKA

2H Offshore, (2007), “OPE Riser Feasibility Study-West Africa SCRs Analysis

Report”, draft.

Alkyon, (2007), “Maneuvering and Moored Ship Simulations for SSP Offloading

System”, draft.

API RP 2P., 1987, “Analysis of Spread Mooring Systems for Floating Drilling

Units”, Washington, DC.

API RP2SK,(1997),” Section 11 Design Wave Approach and Full Stochastic Analysis”

Chakrabarti, Subrata K.,(2005), “ Handbook of Offshore Engineering Volume II”.

Djatmiko, E. B., 2003, “Seakeeping: Perilaku Bangunan Apung Diatas

Gelombang”, Jurusan Teknik Kelautan ITS, Surabaya.

DNV OS E301 , 2001, “ Position Mooring”, Norway.

Esteban, S., Giron-Sierra, J. M., Recas, J., and De La Cruz, J. M. (2005) “Frequency-

Domain Analysis for Prediction of Seasickness of Ships”, Marine Technology,

SNAME, Vol.42, No.4, October

Gourdet, G., and Biasotto P., (2006), “Converted Single Hull F(P)SO Challenges

regarding Inspection, Repair and Maintenance”, Proceedings of Deep Offshore

Technology Conference, Houston, Texas.

Harris, L. M., (1991), “ Deepwater Floating Drilling Operations”

Indiyono, P., 2004, “Hidrodinamika Bangunan Lepas Pantai”, SIC, Surabaya.

Liu, Z. and Frigaard, P., (2001), “Generation and Analysis of Random Wave”,

Laboratoriet for Hydraulik og Havnebygning, Instituttet for Vand, Jord og

Miljøteknik, Aalborg Universitet.

Maritime Research Institute Netherlands (MARIN), (2007), “Numerical Engineering

Study SSP-320, Fully Coupled Time Domain Simulation To Evaluate Motions

And Mooring Loads”, Report No. 20998-1-PO.

Masetti, I.Q., (2006). “MONOBR – Monocolumn Floater, Production, Storage and

Offloading Unit”, Presentation given at OPE in December.

Paik, J.K., and Thayamballi, A.K., (2007), “Ship-Shaped Offshore Installations:

Design, Building, and Operation”, Cambridge University Press, Cambridge, UK,

Chap. 1.

Sevan Marine ASA, (2006) “Pareto’s Oil & Offshore Conference”, Presentation

material, Oslo.

Sevan Marine Comp., http://www.sevanmarine.com/index.php

Statoil Hydro, (2009), “Prediction of Characteristics Respone for Design Purposes”

Syvertsen, K. and Lopes, C., “The SSP: A New Class of Hull for the Oil Industry”.

Terdre, N., (2006) “Cylindrical drilling platform tailored for deepwater and ultra-

harsh environments”, Offshore Magazine, www.offshore-mag.com.

Wertheim, P.H and Abrantes, D., (2006) “2010 target looms: Drive for self-

sufficiency pushes action offshore Brazil”, Offshore Magazine, www.offshore-

mag.com