D54G01P82

4
D54G01P82 D54G01P82 Power Distribution Unit, multimode for single and dual band tower mounted amplifiers (TMAs) Electrical Specifications Input Lightning Surge Current 1 kA Input Lightning Surge Current Waveform 8/20 waveform Input Overcurrent Protection Internal slow blow fuse Input Voltage, operational 20–60 Vdc Power Consumption, maximum 40 W Output Current per Port, maximum 400.0 mA Output Current, maximum 2.2 A Output Lightning Surge Current 2 kA Output Lightning Surge Current Waveform 8/20 waveform Output Overcurrent Protection Hiccup mode current limiting Output Voltage Ripple, maximum 100 mVpp Output Voltage, typical 12 V Electrical Safety Standard CE | EN 60950 Alarm Current Range, high setting 175–312 mA Alarm Current Range, low setting 20–163 mA Product Specifications Product Specifications ©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope. or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013 All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013 page 1 of 4 page 1 of 4 July 12, 2013 July 12, 2013

description

1

Transcript of D54G01P82

Page 1: D54G01P82

 

D54G01P82D54G01P82 Power Distribution Unit, multimode for single and dual band tower mounted amplifiers (TMAs)  

Electrical Specifications Input Lightning Surge Current  1 kA 

Input Lightning Surge Current Waveform  8/20 waveform 

Input Overcurrent Protection  Internal slow blow fuse 

Input Voltage, operational  20–60 Vdc 

Power Consumption, maximum  40 W 

Output Current per Port, maximum  400.0 mA 

Output Current, maximum  2.2 A 

Output Lightning Surge Current  2 kA 

Output Lightning Surge Current Waveform 8/20 waveform 

Output Overcurrent Protection  Hiccup mode current limiting 

Output Voltage Ripple, maximum  100 mVpp 

Output Voltage, typical  12 V 

Electrical Safety Standard  CE | EN 60950 

Alarm Current Range, high setting  175–312 mA 

Alarm Current Range, low setting  20–163 mA 

Product SpecificationsProduct Specifications

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013

page 1 of 4page 1 of 4 July 12, 2013July 12, 2013

Page 2: D54G01P82

Block Diagram  

   

 

 

General Specifications Product Type  Power distribution unit 

Application  Indoor 

Modules per Unit, quantity  1 

Output Ports per Module, quantity  6 

 

Mechanical Specifications Color  Light gray 

Alarm Control  6­position DIP switch 

Alarm Interface  9­pin D­sub Female 

Alarm Relays  Normally closed | Normally open 

LED Indicators, green  Normal | Power supply 

LED Indicators, red  Alarm | dc/dc Converter 

Output Control  6­position DIP switch 

Output Interface  9­pin D­sub Female 

Power Supply Control  Toggle switch 

Power Supply Interface  4­pin single row header Male 

 

Environmental Specifications Ingress Protection Test Method  IEC 60529:2001, IP20 

Operating Temperature  ­10 °C to +60 °C (+14 °F to +140 °F) 

 

Dimensions

Product SpecificationsProduct SpecificationsD54G01P82D54G01P82

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013

page 2 of 4page 2 of 4 July 12, 2013July 12, 2013

Page 3: D54G01P82

Depth  130.0 mm | 5.1 in 

Height  44.0 mm | 1.7 in 

Width  483.0 mm | 19.0 in 

Weight  1.1 kg | 2.4 lb 

Product SpecificationsProduct SpecificationsD54G01P82D54G01P82

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013

page 3 of 4page 3 of 4 July 12, 2013July 12, 2013

Page 4: D54G01P82

Outline Drawing  

   

 

Product SpecificationsProduct SpecificationsD54G01P82D54G01P82

©©2013 CommScope, Inc. All rights reserved. All trademarks identified by 2013 CommScope, Inc. All rights reserved. All trademarks identified by ® ® or ™ are registered trademarks, respectively, of CommScope.or ™ are registered trademarks, respectively, of CommScope. All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013All specifications are subject to change without notice. See www.commscope.com for the most current information. Revised: May 23, 2013

page 4 of 4page 4 of 4 July 12, 2013July 12, 2013