D21m HD Mic/Line Input card…broadcast. The card features four transformer balanced mic inputs and...

1
STUDER Introduces New MIC Preamp Card For HD Audio Studer has introduced a new version of the mic input card for the D21m I/O system, which can be used on any Studer Vista or OnAir console or Router product. Noise and bandwidth are just as important for HD audio as they are for HD video, and the new card is designed to be a perfect partner for HD Audio broadcast. The card features four transformer balanced mic inputs and A/D converters as well as integral split outputs that allow the card to feed a second console or recorder at analogue line levels, meaning a single stagebox can directly feed a second device in addition to the digital console. The HD Mic Input card has been designed with only with the highest specifications as a target. It provides an ultra-wide bandwidth and very low noise floor, with all the classic Studer sound that you would expect from such a device. D21m HD Mic/Line Input card Technical Specifications Input sensitivity ..................................–60 to +26 dBu (for 0 dBFS) Input impedance...............................................2.2 kΩ Split out gain..........................................................0 dB Split out impedance...........................................100 Ω Equivalent input noise.................................–124 dBu (Ri 200 Ω, max. gain) Crosstalk (1 kHz).......................................< –110 dB Frequency response (30 Hz...20 kHz)........–0.2 dB THD&N......................................................< –97 dBFS (1kHz, –1 dBFS, min. gain) THD&N...................................................< –111 dBFS (30 Hz...20 kHz, –30 dBFS, min. gain) THD&N...................................................< –107 dBFS (input level 6 dBu, min. gain) CMRR................................................................> 60 dB (30 Hz...20 kHz, all gain settings) Low-cut filter .................................75 Hz / 12 dB/oct Input delay ............38 samples (0.79 ms @ 48 kHz) (local) Input delay ............45 samples (0.94 ms @ 48 kHz) (remote) Backplane Connector A D 48 V Phantom Pwr Control Logic Sensitivity –60...+26 dBu Soft Clipping High-Pass Filter Sensitivity Control Filter Control Soft Clipping Control Mic/Line In 1 Mic/Line In 2 Mic/Line In 3 Mic/Line In 4 Split out 1 Split out 2 Split out 3 Split out 4 Studer Professional Audio GmbH, Riedthofstrasse 214, CH-8105 Regensdorf-Zurich Switzerland Phone +41 44 870 75 11, Fax +41 44 870 71 34 www.studer.ch Studer USA, 8500 Balboa Boulevard, Northridge, CA 91329, USA Phone +1-818-920-3212, Fax +1-818-920-3208 Studer reserves the right to improve or otherwise alter any information supplied in this document or any other documentation supplied hereafter. E&OE 05/10 BD10.266050

Transcript of D21m HD Mic/Line Input card…broadcast. The card features four transformer balanced mic inputs and...

Page 1: D21m HD Mic/Line Input card…broadcast. The card features four transformer balanced mic inputs and A/D converters as well as integral split outputs that allow the card to feed a second

STUDER Introduces New MIC Preamp Card For HD Audio

Studer has introduced a new version of the mic input card for the D21m I/O system, which can be used on any Studer Vista or OnAir console or Router product.

Noise and bandwidth are just as important for HD audio as they are for HD video, and the new card is designed to be a perfect partner for HD Audio broadcast.

The card features four transformer balanced mic inputs and A/D converters as well as integral split outputs that allow the card to feed a second console or recorder at analogue line levels, meaning a single stagebox can directly feed a second device in addition to the digital console.

The HD Mic Input card has been designed with only with the highest specifications as a target. It provides an ultra-wide bandwidth and very low noise floor, with all the classic Studer sound that you would expect from such a device.

D21m HD Mic/Line Input card

Technical Specifications

Input sensitivity..................................–60 to +26 dBu(for 0 dBFS)

Input impedance...............................................2.2 kΩSplit out gain..........................................................0 dBSplit out impedance...........................................100 ΩEquivalent input noise.................................–124 dBu

(Ri 200 Ω, max. gain)Crosstalk (1 kHz).......................................< –110 dBFrequency response (30 Hz...20 kHz)........–0.2 dBTHD&N......................................................< –97 dBFS

(1kHz, –1 dBFS, min. gain)THD&N...................................................< –111 dBFS

(30 Hz...20 kHz, –30 dBFS, min. gain)THD&N...................................................< –107 dBFS

(input level 6 dBu, min. gain)CMRR................................................................> 60 dB

(30 Hz...20 kHz, all gain settings)Low-cut filter.................................75 Hz / 12 dB/octInput delay............38 samples (0.79 ms @ 48 kHz)

(local)Input delay............45 samples (0.94 ms @ 48 kHz)

(remote)

Back

plan

e Con

nect

or

A

D

48 V Phantom PwrControl Logic

Sensitivity –60...+26 dBu

SoftClipping

High-PassFilter

Sensitivity Control Filter Control Soft Clipping Control

Mic/Line In 1

Mic/Line In 2

Mic/Line In 3

Mic/Line In 4

Split out 1

Split out 2

Split out 3

Split out 4

Studer Professional Audio GmbH, Riedthofstrasse 214, CH-8105 Regensdorf-Zurich Switzerland Phone +41 44 870 75 11, Fax +41 44 870 71 34 www.studer.chStuder USA, 8500 Balboa Boulevard, Northridge, CA 91329, USA Phone +1-818-920-3212, Fax +1-818-920-3208Studer reserves the right to improve or otherwise alter any information supplied in this document or any other documentation supplied hereafter. E&OE 05/10

BD10.266050