D01 001 Interlocking Manifold Drawings_B

6
BIEN DONG 1 PROJECT PROJECT PACKAGE NUMBER: BD1-10-303-HIGH INTEGRITY PRESSURE PROTECTION SYSTEM (HIPPS) DOCUMENT TITLE INTERLOCKING MANIFOLD DRAWINGS TOTAL NO. OF PAGES 5 Including cover page VENDOR'S ORDER NO. 102796 VENDOR'S OWN DOCUMENT NO. REV TRANSMITTAL NO. DATE 102796_ADW_00006 B 1 17/05/2011 SUBMITTED FOR: X REVIEW / APPROVAL INFO FINAL REVIEW DOES NOT CONSTITUTE ACCEPTANCE OF DESIGN DETAILS, CALCULATIONS, TEST METHODS OR MATERIALS DEVELOPED OR SELECTED BY VENDOR, NOR DOES IT RELIEVE VENDOR FROM FULL COMPLIANCE WITH CONTRACTUAL OR OTHER OBLIGATIONS. VENDOR NAME: CCI VALVE TECHNOLOGY GMBH PACKAGE DESCRIPTION: HIGH INTEGRITY PRESSURE PROTECTION SYSTEM (HIPPS) A. ACCEPTED TAG NO: MODEL TYPE: B. ACCEPTED, PROCEED WITH WORK AND INCORPORATE COMMENTS AND RE-SUBMIT. VENDOR DOCUMENT NUMBER (IF APPLICABLE): 102796_ADW_00006 C. NOT ACCEPTED. REVISE AND RE- SUBMIT. VDRL DOC CODE: D1 D. FOR INFORMATION ONLY. NAME: DATE: PTSC PO No. PURCHASER DOCUMENT NUMBER 1774- 2010/PTSCMC /MHH PKG NO. TYPE SEQUENCE REV SIGNATURE: MT1-10-303 D1 0001 B

Transcript of D01 001 Interlocking Manifold Drawings_B

Page 1: D01 001 Interlocking Manifold Drawings_B

BIEN DONG 1 PROJECT

PROJECT PACKAGE NUMBER: BD1-10-303-HIGH INTEGRITY PRESSURE PROTECTION SYSTEM (HIPPS)

DOCUMENT TITLE INTERLOCKING MANIFOLD DRAWINGS

TOTAL NO. OF PAGES 5 Including cover page

VENDOR'S ORDER NO. 102796

VENDOR'S OWN DOCUMENT NO. REV TRANSMITTAL NO. DATE

102796_ADW_00006 B

1

17/05/2011

SUBMITTED FOR:

X

REVIEW / APPROVAL INFO FINAL

REVIEW DOES NOT CONSTITUTE ACCEPTANCE OF

DESIGN DETAILS, CALCULATIONS, TEST METHODS OR MATERIALS DEVELOPED OR SELECTED BY VENDOR, NOR DOES IT RELIEVE VENDOR FROM FULL COMPLIANCE WITH CONTRACTUAL OR OTHER OBLIGATIONS.

VENDOR NAME:

CCI VALVE TECHNOLOGY GMBH

PACKAGE DESCRIPTION:

HIGH INTEGRITY PRESSURE PROTECTION

SYSTEM (HIPPS)

A. ACCEPTED

TAG NO: MODEL TYPE:

B. ACCEPTED, PROCEED WITH WORK AND INCORPORATE COMMENTS AND RE-SUBMIT.

VENDOR DOCUMENT NUMBER (IF APPLICABLE):

102796_ADW_00006

C. NOT ACCEPTED. REVISE AND RE-SUBMIT.

VDRL DOC CODE:

D1

D. FOR INFORMATION ONLY.

NAME: DATE: PTSC PO No. PURCHASER DOCUMENT NUMBER

1774-2010/PTSCMC

/MHH

PKG NO. TYPE SEQUENCE REV

SIGNATURE:

MT1-10-303 D1 0001 B

Page 2: D01 001 Interlocking Manifold Drawings_B

1

Reynaldo Eugenio

From: Marco D'Onofrio [[email protected]]Sent: Tuesday, May 17, 2011 10:54 PMTo: Reynaldo EugenioCc: Son Nguyen Minh; Parag Manvantray Thakar (Kuala Lumpur); Rogelio P Villanueva

(Kuala Lumpur); Samantha Roxas; Mohd Faizal Mustafa (Kuala Lumpur); Senthi Rajaratnam

Subject: D1-10-303 HIPPS-CCI Valve Technology - Vendor Document Submission - 102796_ADW_0006_RevB INTERLOCKING MANIFOLD DRAWINGS

Attachments: 102796_ADW_0006_RevB.pdf

Categories: Review

Dear Reynaldo,

Please find the updated Astava interlocking manifold drawings in rev B.

Below there also the answers to the questions in the commented RevA document you’ve sent to us today.

Comments:

1. Wiring from Transmitters to JB (Item 1) by Vendor?

Answer 1 :The transmitters are not terminated to JB (item 1) but they can be connected directly to the control panel.

The jb is used for the prox. Switches.

2. Please provide the JB (Item 1) termination drawing.

Answer 2 : please see page 4 of attached drawing, this is the diagram for the prox. Switches.

3. We need hook up drawing.

Answer 3 : for electrical hook up please see page 4 of attached drawing. Astava is not supplying other type of

documentation .

4. Is the Pressure Transmitters going to Vendor JB (Item 1) or to Purchaser JB. If it is

terminated at Vendor's JB (Item 1), please show in the document.

Answer 4 : Pressure transmitters are not terminated at JB item 1 but they can be wired directly to the HIPPS panel.

Best regards

Marco D'Onofrio | Control Systems Software Technical Leader | TUV Functional Safety Engineer 1005/08 | CCI Valve / STI srl | Via dell'Industria 13 | 50056 Montelupo Fiorentino - Firenze | Italy | Direct Phone: +39 0571 5953206 | Cell Phone: +39 346 8509767 | [email protected] | www.ccivalve.com www.stiactuation.com

Disclaimer Any e-mail sent from STI Srl, its content and any files transmitted with it are intended solely for the addressee(s) and may be legally privileged and/or confidential. If you are not the intended recipient please delete the message and any attachments and contact the sender via return email. This email message does not form part of a legally binding contract or agreement between the recipient and STI Srl. Messages sent via this medium may be subject to delays, non-delivery and unauthorized alteration. All transmitted email has been prepared using information believed by the author to be reliable, accurate, and virus free. Although the mail item will have been checked for viruses, we cannot accept any responsibility for any consequential or any other losses due to transmitted viruses. STI Srl makes no warranty as to accuracy or completeness. In particular, STI Srl does not accept responsibility for changes made to email after being sent. Any opinions or recommendations expressed are solely those of the author and may be subject to change without notice. STI Srl Via G. Pascoli, 10 a/b 24020 Gorle - Bergamo Italy Phone: +39 035 29282 www.stistrumentazione.com

Page 3: D01 001 Interlocking Manifold Drawings_B
DOnofrioM
Typewriter
TOP VIEW
DOnofrioM
Typewriter
FRONT VIEW
DOnofrioM
Typewriter
SIDE VIEW
DOnofrioM
Typewriter
BOTTOM VIEW
Page 4: D01 001 Interlocking Manifold Drawings_B
Page 5: D01 001 Interlocking Manifold Drawings_B
Page 6: D01 001 Interlocking Manifold Drawings_B