Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available,...
Transcript of Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available,...
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
1/33
Tutorials to .com Tutorial Home | Tutorial Submit | Tutorial Search | RSS
Welcome Guest Tutorial Search: Go
Main Menu
Home
Login
Register
Write Article
Latest Articles
Members
Search
Contact Us
Tutorials to .com Mechine Autocad Pro / E chain drive virtual assembly design and motion simulation technology
Pro / E chain drive virtual assembly design and motion simulationtechnology
Print View by: iSee Total views: 8 Word Count: 2378 Date: Tue, 18 Aug 2009 Time: 4:06 AM
First, an overview of chain drive
Chain drive short pitch precision roller chain, double roller
chain from the sophisticated, precision sleeve short pitch
chain, plate bending roller transmission chain, transmissionchain, as well as tooth forming chain and other transmission
types. Chain Drive is an outstanding feature of the component
chain of small size, large number of rising from the uniform
chain, roller / sleeve mesh structure can be reduced when the
friction and wear, and can achieve the purpose of easing the
impact.
Chain drive for the kinematic simulation of the effect of the
overall machine inspection, chain design and improvement of
the structure and configuration of the number of links have an
important role in verification, chain drive movementanimation for the chain of transmission of product
demonstrations, projects and exchange essential.
Chain components as a result of the small number of characteristics of the chain of transmission flexibility and
practicality, while the number of components of three-dimensional chain drive makes too much body computer
simulation in general difficult to achieve, to solve a huge amount of data on the three-dimensional software and
Voice Coil Motor & StagesLinear & Rotary Motors and Stages Short Stroke,High Speed/Resolutionwww.equipsolutions.com
Simple Motion ControlInexpensive OEM motion control, 1-3 axis,networkable, intelligent.www.simplestep.com
SMT china ReflowManufacturer of reflow oven,wave soldering&stencilprinterswww.torch.cc
Cleveland Precision Syst.Posit. syst. & linear motion comp. Customizeddesignswww.cleveland.de
Page 1 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
28/04/2010http://www tutorialsto com/index php/mechine/autocad/pro e chain drive virtual assembly design and motion simulation technology html
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
2/33
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
3/33
Categories
.Net Tutorial
Asp Tutorial
Database Tutorial
Electro Mechanical
Tutorial
JSP Tutorial
Operating System
Php Tutorial
SoftWare Development
Tutorial
Website Design Tutorial
5 users online.
Picture not clear? Click here to view the image (larger).
Figure 1 chain drive curves
Ads by Google
Roller Chain
520 Chain
Pro E
Motorcycle Chain
Page 3 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
28/04/2010http://www tutorialsto com/index php/mechine/autocad/pro e chain drive virtual assembly design and motion simulation technology html
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
4/33
P 5 f 33P / E h i d i i t l bl d i d ti i l ti t h l T t i l t
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
5/33
1,2 In the chain component of the assembly chain. Create a chain of components, assembling the first section of a
chain (Figure 4), the use of a "flat" connectors, 2 "groove" joint. Election slot curve ctrl key when the election by 4.
Assembling the first two links (Figure 5), in the first section of the right side of a chain of two chain assembly the first
section, the use of a cylindrical connector and a slot connector.
Picture not clear? Click here to view the image (larger).
Figure 3 to simplify the model chain
Page 5 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
28/04/2010http:// t torialsto com/inde php/mechine/a tocad/pro e chain dri e irt al assembl design and motion sim lation technolog html Page 6 of 33Pro / E chain drive virtual assembly design and motion simulation technology Tutorials to com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
6/33
Figure 4 The first chain assembly
Figure 5 second chain assembly
4. Step Four
Dynamics simulation technique using simulated chain drive. Modeling environment from the standard simulation
environment to the body (from the "Applications" "institution"), from the "Insert" "initial conditions", open the
"initial conditions of the definition of" dialog box. Click on the definition of the tangential velocity trough icon, choose
the first slot on the chain connecting symbols (Figure 6), the value of input speed 300mm/sec. From the "analysis"
"institutional analysis", the pop-up "analysis of the definition of" dialog box, choose "dynamic" analysis of the type of
initial conditions for the opening of the initial configuration, the motor and external load tab select Clear All. Click on
the "analysis of the definition of" button at the bottom of the dialog box, the two links can be found along the orbital
motion.
Page 6 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
28/04/2010htt // t t i l t /i d h / hi / t d/ h i d i i t l bl d i d ti i l ti t h l ht l Page 7 of 33Pro / E chain drive virtual assembly design and motion simulation technology Tutorials to com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
7/33
Figure 6 Setting the direction of tangential velocity trough
Page 7 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
28/04/2010htt // t t i l t /i d h / hi / t d/ h i d i i t l bl d i d ti i l ti t h l ht l Page 8 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
8/33
Page 8 of 33Pro / E chain drive virtual assembly design and motion simulation technology Tutorials to .com
28/04/2010htt // t t i l t /i d h / hi / t d/ h i d i i t l bl d i d ti i l ti t h l ht l Page 9 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
9/33
Page 9 of 33Pro / E chain drive virtual assembly design and motion simulation technology Tutorials to .com
28/04/2010htt // t t i l t /i d h / hi / t d/ h i d i i t l bl d i d ti i l ti t h l ht l Page 10 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
10/33
gy g gy
28/04/2010h // i l /i d h / hi / d/ h i d i i l bl d i d i i l i h l h l Page 11 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
11/33
gy g gy
28/04/2010h // i l /i d h / hi / d/ h i d i i l bl d i d i i l i h l h l Page 12 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
12/3328/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 13 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
13/3328/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 14 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
14/3328/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 15 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
15/33
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 16 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
16/33
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 17 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
17/33
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 18 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
18/33
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 19 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
19/33
Figure 7 the definition of initial conditions
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 20 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
20/33
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 21 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
21/33
Figure 8 the definition of dynamic analysis
This method is a dynamic simulation of the tangential speed of the initial conditions trough, and the use of dynamic
simulation of the "dynamic" analysis of the type of simulation trajectory kinematics. This is a few links of the
campaign is, if all links are fitted in place, then the chain needs a very high body simulation of the hardware
configuration, and the need for computing time to run longer.
5. Step 5
The use of kinematic simulation of the entire simulation of the transmission chain root. Because the four steps of the
simulation method to solve the mechanical properties need to bring a certain simulation problems. The following are
used to simulate the type of kinematic analysis.
Three step-by-step assembly of other chain: select the first two links, a clockwise direction using the "repeat"
command relationship between the joint assembly of other parts, just repeat the cylindrical joints, if the component is
to remove duplication of overlapping components, from the "Repeat" dialog box select a final re-duplication of device
operation, repeat until the completion of the first segment 20 (Figure 2). End assembly noted that the last segment of
the hole can not be installed after the first of a chain-axis alignment before mounting hole may be the last section to
create a separate chain of spare parts, so that hole-axis alignment as far as possible (subject to assembly errors and
the impact of orbital position, in the course of the campaign can not achieve full alignment axis, as shown in Figure
9). 1,6,11,16 In the first segment to add different colors and 6,11,16 months in the first segment on the new settings
to increase the plane Deputy (Figure 10).
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 22 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
22/33
Figure 9 the last section with the first chain can not be aligned
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 23 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
23/33
Picture not clear? Click here to view the image (larger).
Figure 10 to add another three plane Deputy
Respectively with reference to the definition of four vice-plane angular velocity, so that the first segment of 1,6,11,16
on the movement in the circle drive components, respectively, serve as each turned 125 degrees. In addition, the
verification operation, if the angular velocity of 125 degrees / s, the first section of a chain approximately a week
rotation time 4.2s.
Into the institutional environment, the current assembly snapshots. 1,6,11,16 In the light of the first segment of the
Z-axis plane, vice joints (select query) the definition of servo motor (Figure 11 and Figure 12). All motor set up are:
the speed of direction (purple arrow) away from right-hand rule in accordance with the chain of anti-clockwise
rotation. Set the speed of the initial angle, select "Current", the speed value of 125.
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 24 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
24/33
Angular velocity of the definition of Figure 11 Movement
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
25/33
Page 26 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
26/33
Figure 12 the speed of custom settings
Analysis of the definition and run the campaign. Select the type of "kinematics", the termination time of 4.2s (Figure
13). In the "motor" tab, the settings take effect each time the motor is the key chain drive simulation. The two
electric motors due to the critical point can not be coincidence (single function), so the first two motor starting time
than the first end of a motor delay 0.01s (Figure 14), for which the time difference in 0.01s the scope of the minimum
time interval, the simulation error is allowed. Click "Run", the normal operation of chain drive.
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 27 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
27/33
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 28 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
28/33
Figure 13 Kinematics of the definition of
Figure 14 Motor role of time
Sprocket for rotation of the simulation, the definition of the two servo motors to determine the mass ratio of two
sprocket by sprocket and chain snapshot section to determine the appearance of engagement between the position to
complete the chain sprocket and the effect of the overall transmission .
Simulation program of the above-mentioned chain drive chain in the simplification of components, under the premise
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 29 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
29/33
of a successful, due to chain drive simulation, particularly large amount of data, run simulation may take several
hours or even days, so in the transmission chain simulation run completed , it is necessary to save the results in time
to run (*. pbk file playback agencies) in order to follow-up simulation results for chain drive for more in-depth
research.
Third, theapplication of the effect of chain drive dynamics simulation with examples of professional platform
Chain drive in bicycles, motorbikes and other means of transport on the common roller chain, motor drive mechanism,
such as the silent chain, as well as in construction machinery used to track vehicles and other operating systems are
widely used. The following is a common engine timing chain drive structure crawler construction machinery, as well as
the chain of transmission andapplication of dynamic simulation. For these typical chain drive, with many
professional software platform gives a professional model and simulation algorithm, the following are two typical
software vendors are given the chain drive solutions.
(1) South Korea-based recursive algorithm FunctionBay the MFBD (flexible multi-body dynamics) analysis software -
RecurDyn, its high mobility tracked vehicle tracked the package on the track chain and the forces of vehicles are given
a more realistic Solving the program, as shown in Figure 15.
Picture not clear? Click here to view the image (larger).
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 30 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
30/33
Figure 15 tracks running through thesystem of modeling and simulation
(2) AVL List of Austria's advanced simulation software engine - Excite, on the engine timing chain drive is given a
professional simulation analysis strategy, as shown in Figure 16.
Picture not clear? Click here to view the image (larger).
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 31 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
31/33
Figure 16 engine timing chain drive dynamics modeling and simulation
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 32 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
32/33
Picture not clear? Click here to view the image (larger).
AutoCAD Tutorial Articles
l Thinkdesign die design in the automotive application
l Pro / E chain drive virtual assembly design and motion simulation technology
l Solidworks how to use mapping project to gear
l Using CAD in the hope of the inquiry
l Gear SolidWarks institutions based on Motion Analysis and Simulation
Interroll Belt Pulleysbelt drives, belt conveyors drivepulleys, drum gearmotorswww.interroll.com/drummotors/
Heat TransmissionEasy to use Simulation Software forsteady and transient Heat Transferwww.smartcae.de
Ramsey Silent ChainQuality Silent Chain & Sprockets Formore than 80 yearswww.RamseyChain.com
Simulink Interactive KitFree kit includes Simulink demos,webinars, reference examples & morewww.mathworks.in
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html
Page 33 of 33Pro / E chain drive virtual assembly design and motion simulation technology - Tutorials to .com
-
8/11/2019 Cycle Chane IN PRO E If you would like to sell this document rather than making it freely available, choose a price
33/33
2008-2010 by Tutorials to .com. All rights reserved. 4.26s
l Secondary development of the basic steps Solidworks
l CATIA's interface based on the secondary development of methods and examples
l Brief description of the application of SolidWorks API
l How to automate the process of design verification
l How to automate the process of design verification
l AutoCAD rendering tutorials: How to map rendering high version
l TRIZ based on a new type of dryer chamber design
l With the changes in array shape Solidworks2009
l ANSYS order flow, the secondary development of documentation and HELP - understanding of mesh
l Parametric design tools in the application of the equipment manufacturing industry
l Based on the essence of the secondary development of SolidWorks Die Design System
l CAD techniques in the hope to share: custom frame should pay attention to the issue of
l SolidWorks on the bevel gear precision forging die design
l CAD-based PDM system integration technology research
l Two-dimensional AutoCAD Tutorial: Detail mechanical parts drawing axonometric map
28/04/2010http://www.tutorialsto.com/index.php/mechine/autocad/pro-e-chain-drive-virtual-assembly-design-and-motion-simulation-technology.html