PGL-Series Package(Compact LCD/LED Panel Tester, LVDS / eDP)

2013

Feature might be changeable,

according to revised function etc.

1. PGL- Series Feature

2

Can output LCM Test’s pattern as type with or without PC and other equipments. Slim & Portable SizeCan cover Max. 2560 x 1600 ( resolution)6/8/10 bits LVDS output -> PGL-12APGL-eDP -> eDP 4Lane Can be indicated “ LCM EEPROM Checksum”Can control 120Hz with 4Ch LVDS outputAlternative VLCD Voltage : 3.3V / 5V / 12VESD Protection CircuitEEPROM Readable/Writable (as option)Can Test varied monitors with 46 installed Patterns, incl. 2pcs of 3D patterns.(expected to increase in)Auto Run -> Prevention “afterimage”, when LCM Aging Test-> Delay Time Adjuster is available, one pattern to the other pattern

Specially, when testing Tablet Display from Retina, 3D etc., PGL- Series package could fully help you better !

Easy Carriage With & Without PC.(Even without PC,

it is workable !Wide range of LCD /LED panels

and theirfinal assembled

products

One(1) Package Multi Use,Cost Reduction with

Simple TestingProcedure

Variable Working Area

3

2. PGL- Series Strong Points & Variable Area

Aging Room Chamber

Local Service Center

Wide Warranty & Repairing Production Sites

Production Line

Easy Carriage withPortable Size

Indicator for LCM Model (Hex code)

Pattern Number

LCM Model Selection Switch

Button for Pattern Changing

PC Control Socket(RS-232)EEPROM Auto run DC 12V(Input)

3. PGL-12A‘s Function (LVDS)

4

LCM Voltage SelectedJumper

120Hz 41pin Cable’s linkLVDS Channel 3,4 Output

Full HD 51pin Cable’s linkLVDS Channel 1,2 Output

HD 30pin Cable’s link

LCM EEPROM’s link

3. PGL-12A‘s Function (LVDS)

5

12. Indicator for Pattern Number

It is showing Pattern #, which is output from current screen.

3. LCM Model Selection Switch

It is using, when selecting LCM Model.In case of TV model, please refer the following table. As for other

models, please refer to manual !

4. Button for Pattern changing

Pattern can be changed, through UP/DOWN Button

1. Indicator for LCM Model(Hex code)

It is 7-segment LED as showing “3 digit”, which is LCD Module’s horizontal resolution information by selected DIP switch.

Showing LCD module’s horizontal resolution information is marked as HEX. (LCD Module horizontal resolution / LVDS channel Value)

2

3

4

DIP S/W 1 2 3 4 5 6 7 8HD ON ON OFF ON OFF OFF ON ONFULL HD ON ON OFF ON OFF OFF ON OFFFULL HD 120HZ ON ON OFF ON OFF OFF OFF ON

3. PGL-12A‘s Function (LVDS)

6

2. Auto run operating Switch

When LCM Aging LCM, automatically, pattern by the other pattern is changed. Pattern Timing is adjusting “ switch”. When showing “0”, it’s operation is off.

It is possible to adjust “time” from 1 Sec. to Sec. 9 Sec.When changing Pattern, LED is lightening.

3. Button for LCM EEPROM Read

When push “ button”, it can be read the value from LCM EEPROM.

4. PC Control Socket (PC S/W Program is supplied separately.)

It is using, when controlling by PC, including changing LCM bit or VESA/JEIDA.It is using , when changing or installation value for H/V total, blank from basic model’s Timing.

1. Power Input Socket

It is DC 12V Input Socket. LED is turn on, when switch on in the left side.

1 2 3 4

3. PGL-12A‘s Function (LVDS)

7

A. TV/Monitor/Laptop PC LCD Panel Manufacturers~ LCD Panel Production Line, including Aging Chamber Room etc.

B. Component Suppliers of LCD Panel Manufacturers~ Testing by panel component suppliers such as T-CON , SMT, BACKLIGHT

C. Domestic & Overseas Partners of Companies in A & B Above~ Matching test between LCD panels and assembled products

D. LCD Panel Repairing / Recycle Companies

~ Variable Repairing Production Line, including Aging Chamber Room etc.

E. Warranty Service Providers with wide local channel~ LCD panels requiring A/S services for LCD assembled products like PC, TV etc.

~ Customers (or Company) who should visit at a lot of service sites.

E. B-Class LCD Panel Sales Companies

F. EMS ( Electronic Manufacturing Supplier)8

4. Target Customer Group

Pattern No No.4 No.5 No.6

Name 8 Color Bar Gray_0 Gray_16

PatternForm

Pattern No No.7 No.8 No.9

Name Gray_32 Gray_64 Gray_85

PatternForm

5. Pattern (Total 46 installed, Expected to increase in)

9

Pattern No No.1 No.2 No.3Name WINFCC Pattern LG Pattern Dell Pattern

PatternForm

Pattern No 000(HEX) 010(HEX) 020(HEX)

Pattern No No.10 No.11 No.12Name Gray_127 Gray_200 Gray_255

PatternForm

Pattern No No.13 No.14 No.15

Name Line Black White Check 8x6 SMPTE Color Bar

PatternForm

Pattern No No.16 No.17 No.18Name Red_255 Red_191 Red_127

PatternForm

5. Pattern

10

Pattern No No.19 No.20 No.21Name Green_255 Green_191 Green_127

PatternForm

Pattern No No.22 No.23 No.24Name Green_64 Blue_255 Blue_191

PatternForm

Pattern No No.25 No.26 No.27Name Blue_127 Gray_64 Red 255 Bar

PatternForm

6. Pattern

11

Pattern No. No.28 No.29 No.30Pattern Name Green 255 Bar Blue 255 Bar RG255 Bar

Pattern Form

Pattern No. No.31 No.32 No.33Pattern Name RB 255 Bar GB 255 Bar RGB 255 Bar

Pattern Form

Pattern No. No.34 No.35 No.36Pattern Name Concentric BW Gray64_Black Gray127_Black

Pattern Form

5. Pattern

12

Pattern No No.37 No.38 No.39Name Gray191_Black Gray255_Black Gray0_White

PatternForm

Pattern No No.40 No.41 No.42Name Gray64_White Gray127_White Gray191_White

PatternForm

5. Pattern

13

6. Term & Condition

Unit Price-. LVDS, eDP & Multi LED Inverter

for laptop PC panel(it should be based on MOQ.)

Condition -. 4~6weeks after receipt of

firmed PO & payment-. T/T in advance

Warranty -. Warranty Period

3-6 Months after the shipment.-. spare units are available .

MOQ (Minimum Order

Quantity)

-. Minimum order quantity: Starting from 10units

by one(1 )shipment

14

**. Appendix I. : Multi-LED Inverter for laptop PC panel

When testing variable laptop PC panels, which is not built in

LED drive from PCB.

More Conveniently, you could test any laptopPC panel, via Multi-LED Inverter !

-. Latest Display Panel , like Retina , iPad, Macbook etc.

-. 3D panel, Laptop PC from HP,DELL etc.(LVDS, eDP type are available together.)

15

**. Appendix II : Final Assembled Package

When testing variable laptop PC panels or others, PGL- Series full packageis better solution for you.

LVDS TesterModel Name : PGL-12A

eDP Tester as “ image” Model Name : PGL-eDP

Multi LED Inverterfor laptop PC panel

16

Selected Interface Cables(LCD Cables)

**. Appendix III. : With INVERTER TV Panel

When testing TV panels, which is built in Inverter from Panel.

TV LCD

17

LVDS Cable(12V,Data)

DC 12V Adaptor Inverter Cable(24V,INV On, Dimming)

LVDS

DC 24V POWER

**. Appendix IV. : With LED Drive Laptop PC panel

When testing variable laptop PC panels, which is built in

LED drive from Panel.

Laptop PC LCD

18

DC 12V Adaptor

LVDS Cable(3.3V/Data, 12V,LED On, Dim)

LVDS

**. Appendix V. : W/O LED Drive laptop PC panel

When testing variable laptop PC panels, which is not built in

LED drive from Panel.

Laptop PC LCD

19

DC 12V Adaptor

LVDS Cable(3.3V/Data)LVDS

12V,On Anode, Cathode

LED DRIVE

**. Appendix IV : eDP Panel

When testing with Variable Latest eDP Panels ;

eDP Tester Model Name : PGL eDPas “image”

eDP Panel

20

eDP 4Lane

When testing variable laptop PC panels, which is built in LED drive from Panel.

With LED DRIVE Laptop PC LCD

LCD Structure

21

W/O LED DRIVE Laptop PC LCD

When testing variable laptop PC panels, which is Not built in LED drive from Panel.

LVDS trough Connector + LED DRIVE

Not Built in LED DRIVE

LCD Structure

22

**. Appendix VI : Laptop PC LCD Panel

23

Test Panel : LGD , LP140WD1(1600 X 900)

**. Appendix VII : iPad 1,2 LCD Panel

24

Test Panel : iPad 1.2 ,LTN097XL01-A01 (1024 X 768)

25

Target Panel : iPad 3 , LP097QX1-SPA1 (2560*1024)

eDP Tester Model Name : PGL eDP(as “ image”)

eDP 4LaneCable

iPad 3

iPad 3 cable, built in LCM

LED DRIVE

**. Appendix VIII : iPad 3 LCD Panel

Pin No.1LCM VCC(3.3/5V/12V)

Pin No.51

Pin No.51LCM

VCC(3.3/5V/12V)

Pin No.1

*. Between PGL-12A & LCM, each pin is positioned in the opposite direction.

++. ReasonIf PGL-12A’s pin is positioned with LCM in the same

direction, PGL-12A’s Pin. No.51 can be linked to VCC.

If it is so like the above mentioned, when using Flat Cable by customer, PGL-12A’s Pin No.51 should be

connected with LCM’s Pin. No.1. It might be cause of problem.

*. It is the same pin map position with E-Board.26

**. Appendix VIII : PGL-12A Pin map Information

No Symbol Description No Symbol Description

1 VLCD LCM VCC 27 T1EP 1st LVDS Tx Signal(E+)

2 VLCD LCM VCC 28 T1EM 1st LVDS Tx Signal(E-)

3 VLCD LCM VCC 29 T1DP 1st LVDS Tx Signal(D+)

4 VLCD LCM VCC 30 T1DM 1st LVDS Tx Signal(D-)

5 NC No connection 31 GND Ground

6 GND Ground 32 T1CLKP 1st LVDS Tx Clock Signal(+)

7 GND Ground 33 T1CLKN 1st LVDS Tx Clock Signal(-)

8 GND Ground 34 GND Ground

9 NC No connection 35 T1CP 1st LVDS Tx Signal(C+)

10 NC No connection 36 T1CM 1st LVDS Tx Signal(C-)

11 T2EP 2nd LVDS Tx Signal(E+) 37 T1BP 1st LVDS Tx Signal(B+)

12 T2EM 2nd LVDS Tx Signal (E-) 38 T1BM 1st LVDS Tx Signal(B-)

13 T2DP 2nd LVDS Tx Signal(D+) 39 T1AP 1st LVDS Tx Signal(A+)

14 T2DM 2nd LVDS Tx Signal(D-) 40 T1AM 1st LVDS Tx Signal(A-)

15 GND Ground 41 GND Ground

16 T2CLKP 2nd LVDS Tx Clock Signal(+) 42 NC No connection

17 T2CLKN 2nd LVDS Tx Clock Signal(-) 43 NC No connection

18 GND Ground 44 NC No connection

19 T2CP 2nd LVDS Tx Signal(C+) 45 NC No connection

20 T2CM 2nd LVDS Tx Signal(C-) 46 NC No connection

21 T2BP 2nd LVDS Tx Signal(B+) 47 LVDS Select ‘H’ =JEIDA ,‘L’ or NC = VESA

22 T2BM 2nd LVDS Tx Signal(B-) 48 NC No connection

23 T2AP 2nd LVDS Tx Signal(A+) 49 NC 12V Out(VCC for LED Drive)

24 T2AM 2nd LVDS Tx Signal(A-) 50 NC 12V Out(VCC for LED Drive)

25 Bit Select ‘H’ = 10bit(D) ,‘L’ = 8bit 51 NC 12V Out(VCC for LED Drive)

26 NC No connection

When Testing TV panel , -> No Connection

When Testing laptop LCM, -> LED Drive VCC

27

**. Appendix VIII : PGL-12A Pin map Information