CWNA Guide to Wireless LANs, Second Edition Chapter One It’s a Wireless World.
CWNA Guide to Wireless LANs, Second Edition Chapter Five IEEE 802.11 Media Access Control and...
-
date post
20-Dec-2015 -
Category
Documents
-
view
224 -
download
1
Transcript of CWNA Guide to Wireless LANs, Second Edition Chapter Five IEEE 802.11 Media Access Control and...
CWNA Guide to Wireless LANs, Second Edition
Chapter FiveIEEE 802.11 Media Access Control and
Network Layer Standards
1
Objectives
• List and define the three types of WLAN configurations
• Tell the function of the MAC frame formats• Explain the MAC procedures for joining,
transmitting, and remaining connected to a WLAN• Describe the functions of mobile IP
2
IEEE Wireless LAN Configurations: Basic Service Set
3
• Basic Service Set (BSS): Group of wireless devices served by single AP– infrastructure mode
• BSS must be assigned unique identifier – Service Set Identifier
(SSID)• Serves as “network
name” for BSS• Basic Service Area (BSA):
Geographical area of a BSS– Max BSA for a WLAN
depends on many factors• Dynamic rate shifting: As
mobile devices move away from AP, transmission speed decreases
IEEE Wireless LAN Configurations: Extended Service Set
4
• Extended Service Set (ESS): Comprised of two or more BSS networks connected via a common distribution system
• APs can be positioned so that cells overlap to facilitate roaming– Wireless devices
choose AP based on signal strength
– Handoff
IEEE Wireless LAN Configurations: Independent Basic Service Set
5
• Independent Basic Service Set (IBSS): Wireless network that does not use an AP– Wireless devices
communicate between themselves
– Peer-to-peer or ad hoc mode
• BSS more flexible than IBSS in being able to connect to other wired or wireless networks
• IBSS useful for quickly and easily setting up wireless network– When no connection to
Internet or external network needed
IEEE 802.11 Media Access Control (MAC) Layer Standards
• Media Access Control (MAC) layer performs several vital functions in a WLAN– Discovering WLAN signal– Joining WLAN– Transmitting on WLAN– Remaining connected to WLAN
• Mechanics of how functions performed center around frames sent and received in WLANs
6
MAC Frame Formats
• Packet: Smaller segments of a digital data transmission– Strictly speaking, other terms used to describe these smaller
segments
• Frames: Packet at MAC layer – Or Data Link layer in OSI model– IEEE MAC frames different from 802.3 Ethernet frames in format
and function– Used by wireless NICs and APs for communications and
managing/controlling wireless network
7
MAC Frame Formats -Management
• Management Frames: Initialize communications between device and AP (infrastructure mode) or between devices (ad hoc mode)– Maintain connection
8
Figure 5-4: Structure of a management frame
MAC Frame Formats - Types
• Types of management frames:1. Authentication frame2. Association request frame3. Association response frame4. Beacon frame5. Deauthentication frame6. Disassociation frame7. Probe request frame8. Probe response frame9. Reassociation request frame10. Reassociation response frame
9
MAC Frame Formats - Control
• Control frames: Provide assistance in delivering frames that contain data
10
Figure 5-5: Control frame
MAC Frame Formats - Data
• Data frame: Carries information to be transmitted to destination device
11
Figure 5-6: Data frame
Discovering the WLAN: Beaconing
12
• At regular intervals, AP (infrastructure network) or wireless device (ad hoc network) sends beacon frame – Announce presence – Provide info for other
devices to join network• Beacon frame format
follows standard structure of a management frame– Destination address
always set to all ones
Discovering the WLAN: Beaconing Fields
• Beacon frame body contains following fields:1. Beacon interval2. Timestamp3. Service Set Identifier (SSID)4. Supported rates5. Parameter sets6. Capability information
• In ad hoc networks, each wireless device assumes responsibility for beaconing
• In infrastructure networks beacon interval normally 100 ms, but can be modified
13
Discovering the WLAN: Scanning
• Receiving wireless device must be looking for beacon frames
• Passive scanning: Wireless device simply listens for beacon frame– Typically, on each available channel for set period
• Active scanning: Wireless device first sends out a management probe request frame on each available channel – Then waits for probe response frame from all available APs
14
Joining the WLAN: Authentication
• Unlike standard wired LANS, authentication performed before user connected to network– Authentication of the wireless device, not the user
• IEEE 802.11 authentication: Process in which AP accepts or rejects a wireless device
• Open system authentication: Most basic, and default, authentication method
• Shared key authentication: Optional authentication method– Utilizes challenge text
16
Joining the WLAN: Authentication
• Open system and Shared key authentication techniques are weak– Open System: Only need SSID to connect– Shared Key: Key installed manually on devices
• Can be discovered by examining the devices
• Digital certificates: Digital documents that associate an individual with key value– Digitally “signed” by trusted third party– Cannot change any part of digital certificate without being
detected
19
Joining the WLAN: Association
• Association: Accepting a wireless device into a wireless network– Final step to join WLAN
• After authentication, AP responds with association response frame– Contains acceptance or rejection notice
• If AP accepts wireless device, reserves memory space in AP and establishes association ID
• Association response frame includes association ID and supported data rates
20
Distributed Coordination Function (DCF)
• MAC layer responsible for controlling access to wireless medium
• Channel access methods: Rules for cooperation among wireless devices– Contention: Computers compete to use medium
• If two devices send frames simultaneously, collision results and frames become unintelligible
• Must take steps to avoid collisions
21
Carrier Sense Multiple Access with Collision Detection (CSMA/CD)Used on Ethernet LANs
22
• Carrier Sense Multiple Access with Collision Detection (CSMA/CD): Before networked device sends a frame, listens to see if another device currently transmitting– If traffic exists, wait; otherwise send– Devices continue listening while sending frame
• If collision occurs, stops and broadcasts a “jam” signal• CSMA/CD cannot be used on wireless networks:
– Difficult to detect collisions– Hidden node problem
Hidden node problem
23
Laptop A ,Laptop B and Laptop C can not see the transmission of each other (more later on this topic)
Transmitting on the WLAN: Distributed Coordination Function
and CSMA/CA• Distributed Coordination Function (DCF):
Specifies modified version of CSMA/CD– Carrier Sense Multiple Access with Collision Avoidance
(CSMA/CA)– Attempts to avoid collisions altogether– Time when most collisions occur is immediately after a station
completes transmission– All stations must wait random amount of time after medium
clear• Slot time
24
CSMA/CA
• CSMA/CA also reduces collisions via explicit frame acknowledgment– Acknowledgment frame (ACK): Sent by receiving device to
sending device to confirm data frame arrived intact– If ACK not returned, transmission error assumed
• CSMA/CA does not eliminate collisions– Does not solve hidden node problem
25
Request to Send/Clear to Send
27
• Request to Send/Clear to Send (RTS/CTS) protocol: Option used to solve hidden node problem– Significant overhead upon the WLAN with transmission of
RTS and CTS frames• Especially with short data packets
– RTS threshold: Only packets that longer than RTS threshold transmitted using RTS/CTS
Interframe Spacing
28
• Interframe spaces (IFS): Intervals between transmissions of data frames– Short IFS (SIFS): For immediate response actions such as
ACK– Point Coordination Function IFS (PIFS): Time used by a
device to access medium after it has been asked and then given approval to transmit
– Distributed Coordination Function IFS (DIFS): Standard interval between transmission of data frames
Transmitting on the WLAN: Fragmentation
• Fragmentation: Divide data to be transmitted from one large frame into several smaller ones– Reduces probability of collisions– Reduces amount of time medium is in use
• If data frame length exceeds specific value, MAC layer fragments it– Receiving station reassembles fragments
• Alternative to RTS/CTS– High overhead
• ACKs and additional SIFS time gaps
30
Point Coordination Function (PCF)
• Polling: Channel access method in which each device asked in sequence if it wants to transmit– Effectively prevents collisions
• Point Coordination Function (PCF): AP serves as polling device or “point coordinator”
• Point coordinator has to wait only through point coordination function IFS (PIFS) time gap– Shorter than DFIS time gap
31
DIFS and DCF frames
32
• If point coordinator hears no traffic after PIFS time gap, sends out beacon frame– Field to indicate length of time that PCF (polling) will be used
instead of DCF (contention)• Receiving stations must stop transmission for that amount
of time– Point coordinator then sends frame to specific station,
granting permission to transmit one frame• 802.11 standard allows WLAN to alternate between PCF (polling)
and DCF (contention)
Quality of Service (QoS) and 802.11e
• DCF does not work well for real-time, time-dependent traffic
• Quality of Service (QoS): Capability to prioritize different types of frames
• Wi-Fi Multimedia (WMM): Modeled after wired network QoS prioritization scheme
• 802.11e draft: defines superset of features intended to provide QoS over WLANs– Proposes two new mode of operation for 802.11 MAC Layer
33
Transmitting on the WLAN: Quality of Service and 802.11e
(continued)• 802.11e draft (continued):
– Enhanced Distributed Channel Access (EDCA): Contention-based but supports different types of traffic
• Four access categories (AC)• Provides “relative” QoS but cannot guarantee service
– Hybrid Coordination Function Controlled Channel Access (HCCA): New form of PCF based upon polling
• Serves as a centralized scheduling mechanism
35
Remaining Connected to the WLAN: Reassociation
• Reassociation: Device drops connection with one AP and establish connection with another– Several reason why reassociation may occur:
• Roaming• Weakened signal
– When device determines link to current AP is poor, begins scanning to find another AP
• Can use information from previous scans
36
Power Management
37
• A WLAN laptop must remain “awake” in order to receive network transmissions– Original IEEE 802 standard assumes stations always ready to
receive network messages• Power management: Allows mobile devices to conserve
battery life without missing transmissions– Transparent to all protocols– Differs based on WLAN configuration– AP records which stations awake and sleeping– Buffering: If sleeping, AP temporarily stores frames
Power Management
• At set times AP send out beacon to all stations– Contains traffic indication map (TIM)– At same time, all sleeping stations switch into active listening
mode
• Power management in ad hoc mode:– Ad hoc traffic indication message (ATIM) window: Time at
which all stations must be awake• Wireless device sends beacon to all other devices
– Devices that previously attempted to send a frame to a sleeping device will send ATIM frame indicating that receiving device has data to receive and must remain awake
38
WLAN IP Addressing
• In standard networking, IP protocol responsible for moving frames between computers– Network layer protocol
• TCP/IP works on principle that each network host has unique IP address– Used to locate path to specific host– Routers use IP address to forward packets– Prohibits mobile users from switching to another network and
using same IP number• Users who want to roam need new IP address on every network
39
Mobile IP
40
• Provides mechanism within TCP/IP protocol to support mobile computing– Computers given home address,
• Static IP number on home network– Home agent: Forwarding mechanism that keeps track of
where mobile computer located– When computer moves to foreign network, a foreign
agent provides routing services• Assigns computer a care-of address• Computer registers care-of address with home agent
Summary
• A Basic Service Set (BSS) is defined as a group of wireless devices that is served by a single access point (AP)
• An Extended Service Set (ESS) is comprised of two or more BSS networks that are connected through a common distribution system
• An Independent Basic Service Set (IBSS) is a wireless network that does not use an access point
• Frames are used by both wireless NICs and access points for communication and for managing and controlling the wireless network
42
Summary (continued)
• The MAC layer provides four major functions in WLANs: discovering the WLAN signal, joining the WLAN, transmitting on the WLAN, and remaining connected to the WLAN
• Discovery is a twofold process: the AP or other wireless devices must transmit an appropriate frame (beaconing), and the wireless device must be looking for those frames (scanning)
• Once a wireless device has discovered the WLAN, it requests to join the network; This is a twofold process known as authentication and association
43
Summary (continued)
• The IEEE 802.11 standard specifies two procedures for transmitting on the WLAN, distributed coordination function (DCF) and an optional point coordination function (PCF)
• The 802.11 standard provides for an optional polling function known as Point Coordination Function (PCF)
• The 802.11e draft defines a superset of features that is intended to provide QoS over WLANs
44